Error opening project file

Hi all

I have a microwave (v9) office project file.

This project contains about 6 to 8 schematic files. Overall size of the project is about 400 KB.

Earlier I could open this project file and simulate without any error.

But now I am unable to this project opens successfully.

On the opening of this project, an error window appears which gives error reading for document No. files.  21 to 34. After you close all the windows of these 14 error, the project opens but only with the graphic details & without any schematic file

Thus, no race simulation now happening.

Details of the error are fixed here.

I need the urgent scheme to start my pcb Assembly. I have neede the urgent values pane

Kindly help.

Kind regards

Fox

rajan_crl,

I was able to recover the project. I tested the attached draft in v9 and patterns are present. I hope this helps.

~ Mark B.

Tags: NI Products

Similar Questions

  • I am trying to open a project in the Prime Minister and it gives the following error: "Unknown error opening project" its okay?

    I am trying to open a project in the Prime Minister and it gives the following error: "Unknown error opening project" its okay?

    Hi Janissaira,

    I am trying to open a project in the Prime Minister and it gives the following error: "Unknown error opening project" its okay?

    What version of Premiere Pro, you have installed?

    You started the project on the same machine or different?

    Try to import your original project file in a new Premiere Pro project.

    Thank you

    Ilyes Singh

  • CoreTelephony error in trace file as a file for coretelephony tracing operation has failed, perhaps you need more disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted

    I got this error:

    "CoreTelephony Trace file error
    A file for CoreTelephony tracing operation failed, you might run out of disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted"

    I tried to solve it by searching for CoreTelephony errors. Could not resolve yet.
    Software does not, especially of photoshop...

    Any ideas?

    Same thing here, iMac with OS X 10.11.6. All started a couple days ago. Have not found any valid solution online yet, I tried rebooting in recovery mode and check disk, but it seems that everything is ok with the drives and permissions.

  • What should I do if I get error "Error opening Illustrator File."?

    Every time I have try and import an illustrator file or click "New puppet in illustrator" I get "Error opening Illustrator File."

    Help, please.

    It seems to have worked now for some reason any.

  • Previously, work job FTP in the batch file gives message "error opening script file.

    I have two FTP jobs on two separate machines that I've been running as tasks scheduled for a few years with success.  They are on the same network, but we're on the field, the other is out of the field.  Both are Windows XP SP3.

    Starting this week, two of them fail when you try to load the actual script FTP file.    Here is an example of the ftp command that I use: FTP d - n-i-s:C:\scripts\getmyfiles.txt

    The message says "Error opening C:\scripts\getmyfiles.txt" and displays help FTP.  I should also mention that the FTP seems to work fine if I connect from the command prompt, and does not use a script file manually.

    Both of these batch files containing similar (different but calling script files) FTP commands were executed the week last successfully.

    Any suggestions are appreciated!

    Hi Kristin,

    The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

    http://social.msdn.Microsoft.com/forums/en/categories/

    Hope the helps of information.

  • Error opening pdf file, but then it still opens

    I have problems when I open a pdf file. I use the code below to open a pdf file.

    on mouseUp me
    Acro = bafindapp ("pdf")
    If acro = empty then
    acrofile = me.pPDF
    alert 'this program was unable to find suitable for your system software to open a PDF document. It will open www.adobe.com, where you can download a free viewer.
    goToNetPage " " http://www.Adobe.com "

    on the other
    Open the moviePath me.pPDF & "Resource\" with acro
    end if

    end

    When it comes on a button, adobe reader software will open, but gives an error stating that "there was an error opening this document. This file is not found. »


    When I hit the button on the advice of the error, the PDF opens.

    No idea why I get this message even if the pdf file opens after rejecting the message would be appreciated.

    The reason why I assumed, or asked, if it was only Windows is due to your use of the forward slash as the separator file. To make the cross-platform script try the following:

    on mouseUp me  acro = baFindApp("pdf")  if ( acro = EMPTY ) then    alert "This program was unable to find a suitable program on your system to open a PDF document. It will open www.adobe.com, where you can download a free viewer"    goToNetPage "http://www.adobe.com"  else    mPath = _movie.path    tFile = mPath & "Resource" & mPath.char[length(mPath)] & me.pPDF    if baFileExists(tFile) then      OK = baOpenFile(tFile, "normal")      if ( OK < 32 ) then        -- see docs for numbers and their meaning        alert "Error opening file:" && OK      end if    else      alert "File not found:" &RETURN& tFile    end if  end ifend
    
  • Whenever I try to open a program get this error: "open the file with.

    whenever I try to connect to the internet or open a program, it rises, open this file with, iwas only able to connect today by selecting search for the appropriate Web file how can I disable that I don't know why he started doing this help please.

    whenever I try to connect to the internet or open a program, it rises, open this file with, iwas only able to connect today by selecting search for the appropriate Web file how can I disable that I don't know why he started doing this help please.

    Open this link below, go to the answer given by Phantom 010
    http://forums.techguy.org/Windows-Vista/899995-solved-Open-box-opens-every.html

    t-4-2

  • CC 10.1 with InDesign CS6 error opening a file

    I have Adobe CS6 and ran into a problem when a co-worker sent me a file. When you try to open a file in InDesign-.indd, a dialogue box emerged indicating 'cannot be opened because it was saved with a later version of Adobe InDesign CS (8.1)' after noticing that I needed to update my version of CS, I installed the updates and found that now, it says "cannot be opened because it was saved with a later version of Adobe InDesign CS (10.1)" what is say? I checked and I have InDesign version 8.0.2. and I have more updates to install. Can someone explain to me why this happens and how to fix this? I got a version .idml of the file I want to open and that seems to work, but I'd like to solve this problem in order to avoid this again. Any help is appreciated. Thank you.

    The only way to avoid that he must ask the other person to work in CS6 or to move to the creative cloud.

  • Error opening PDF files from the internet and from outlook 2010

    I use Server R2 2012 and you receive an error when you try to open a PDF from Outlook 2010 or when I try to upload a PDF file and open it from the internet. However, if the PDF file is one that opens in the web browser, it works fine. Using IE 11 account has access, I tried with a domain administrator account. Finally, I tried to uninstall and re install with no luck. Any ideas?

    I get:

    1Capture.JPG

    I uninstalled Adobe Acrobat Reader DC and installed Adobe Reader XI and everything works fine. This will be our fix current until a solution is found for the error above

  • When you try to update from XP SP1 to SP1a, I get the same error Msg. There was an error opening the file C:\WINDOWS\svcpack.log.

    When you try to update to SP2, I receive an error message that says: "the file or directory is corrupted and unreadable." and then the installation is not complete.  I am trying to update an old computer to SP3 and thought that I read that you need to update SP1a or SP2 to SP3 before.  Not sure if it's a problem of script or activeX.

    Error message that you receive when you try to upgrade a Windows XP-based computer to Windows XP Service Pack 2 by visiting the Windows Update Web site: "Unable to read or write to the database"
    http://support.Microsoft.com/kb/915169

    See also

    Windows XP Service Pack 2 Problem Solver
    http://winhlp.com/node/125

  • File does not begin with '% PDF -'. Error opening PDF files in the browser

    When the user rent a report via internet explorer, it shows "file does not begin with '% PDF -'". I reinstalled acrobat, but it still does not.

    Pdf_Error.JPG

    Configuration as follows

    Adobe Acrobat Reader X

    Name of the operating system: Microsoft Windows 10

    Browser: Internet Explorer Version: 11.00.10586

    The file you are trying to open is not a (valid) PDF file. Contact the Web site from which you guessed it, and report the problem to them.

  • Why I get a runtime error opening a file Captivate 6 to 8 Captivate?

    I'm trying to open a Captivate 6 with 8 Captivate. I get a R6025 - pure virtual function call runtime error. I can open it from another computer, but not from my computer. What should I do?

    If you are not on Cp 8.0.1 then update your version and kill your preference folder.

    If you'RE on the latest version, then still kill your preference folder.

  • Photoshop error opening NEF files in CS6 of Nikon D800

    Using a Dell 64 bit system using Windows 7 Pro

    Upgraded to CS5 CS6 nave always files do not open in Photoshop

    Nikon D800 raw files will not open in Photoshop

    The update of the upgrade worked!  Yay!

  • I am trying to load the Canon camera software and I get the error message "error opening Ini file."

    I have successfully loaded this software on another PC with XP, version 3.0.   5 modules are present in the package of Cannon and a module receives this error, the other 4 are loaded with success.

    Hi oldpro44,

    1. What is the model number of the camera?
    2. The place where you download the software of the camera?
    3. You are able to install other software or drivers on the computer?

    Method 1

    I suggest that you uninstall all the software of the camera to the computer and then download the latest software from the camera to the Canon site and check if it helps.

    How to change or remove a program in Windows XP

    http://support.Microsoft.com/kb/307895

    Method 2

    If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

  • After Effects: Error opening the file. See picture attached of error

    2014-09-09 at 4.10 PM.png

    How can I solve this. Help, please. I have Adobe CC.

    Thank you!!

    Ananya

    Install after effects CC 2014 (13.0.2) or get the person who gave you this file to save it back to after effects CC (12.x).

Maybe you are looking for

  • I have a HP Pavilion g7-1279dx Notebook sm bus controller driver missing

    I looked on web view intel but did not see the driver. help please

  • Could not load the profile - cannot fix.

    My administrator account on profile can not be loaded, and I tried regedit, rename the temporary profile * by help of vista (.ba to .bak) but it comes up with the error. I tiried also copy my profile but that doesn't work either, any suggestions?

  • I can't find a toolbar of the computer after the upgrade to windows 7.

    Original title: computer toolbar I had a toolbar from the computer desktop to vista but with upgraded to windows 7 I can't

  • C2960 with RADIUS

    Hello, everyone! I have a problem with the dynamic assignment of VLANS. The Setup is actually the following: RADIUS host - Switch - Server I have no problem with authentication, messages without any problems. The thing is that the switch does not see

  • Two unique LOV values update

    I have set up a form in the APEX that allows the user to select a city using a popup LOV. This is done in order to restrict the user in the selection of the city in a drop-down list itself is generated based on the field COUNTRY / STATE that the user