Error opening "will MMC does not not with a version of Internet Explorer prior to version Internet Explorer 5.5" the MMC

Similar Questions

• I have a MBP Late 2013 will pair does not with 6s on Blutooth

  Read all comments (lots of old stuff on these communities) and tried all the suggestions of trashing the plist etc etc. Still unable to get my iPhone 6s to pair with my MBP end 2013.

  For a fleeting moment after that match it says connected not connected appears.

  AirDrop works, but my phone does not appear on the screen of the devices. If sending photos of the iPhone works well my avatar is not displayed as sender just my intials & where ever he gets the ints info not the name I use in my Contacts.

  Someone at - it any idea what is happening. This worked OK until recently.

  An iPhone will pair not via Bluetooth to a computer (Mac or Windows) with the exception of hotspot and then only if your cell phone plan he supports. See below for more information. https://discussions.Apple.com/docs/doc-7722

  If you try to use the procedure of transfer/continuity or AirDrop, which does not have Bluetooth but devices don't are NOT matched. Bluetooth must be just on and the devices within range of the other. The following may help in problems of transfer/continuity: https://support.apple.com/en-us/HT204678

• When I open Firefox it does not to my home page, even if my setting are set to go to the homepage when Firefox is open

  I repeatedly checked my settings for Firefox go to my home page when opened. Instead, it opens my recent pages open. I have the latest version of Firefox. This happened about a week.

  Ah! I see something!

  Your troubleshooting information, says that there is a file user.js in your profile folder

  The user.js file appears only if you or another software created, therefore, normally, he wouldn't be here.
  The user.js file is read whenever you launch Firefox and initializes the preferences to the value specified in this file.

  Delete a possible user.js file and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.
  
  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Preferences_not_saved

  Rename (or delete) the sessionstore.js file and possible sessionstore-# .js files with a number and sessionstore.bak in the Firefox profile folder.

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Multiple_profile_files_created

• OfficeJet 6500 a installation disc will auto does not start on my thinkpad win 7. ??

  OfficeJet 6500 a installation disc will auto does not start on my thinkpad win 7. ??

  Try to download the software from hp.com via the link below.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4083977&LC=en&cc=us&DLC=en&task=&lang=en&cc=us

• If I try and open an email with an attachment I get an error message: this file does not have a program associated with it for performing this action.

  If I try and open an email with an attachment I get an error message: this file does not have a program associated with it for performing this action. create an association in the folders option control panel.  Once there, I don't know where to go

  What is the attachment file extension? If you know what program should open with, just do the following.
   
  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: The appropriate program.
  6. check: always use the selected program to open this type of file.
  7. click on OK.
   
  This should allow you to open these attachments directly from email address now.

• Windows Update will now download updates, many different error codes, Control Panel does not open.

  the main problem would be not to download updates, my icon appears in the lower right of windows but I can't open reguradless of what method, control panel and update windows stand closeing

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------

  After the foregoing:

  What antivirus/antispyware/security products you have on your machine? Include all that already been including
  those that you uninstalled. (These can leave leftovers that can cause strange problems.)

  A search for all most .cpl files will be in "C:\Windows\System32" However, you can have others. Click
  each of them at a time and see if it does not start - if so right-click on it and rename it using cpZ as the extension is is to find. Retry Control Panel - if no joy persevering of all .cpl files. (Note that others are under other files under C:\Windows not should be judged, because they are not active).

  Some of them are appwiz.cpl firewall.cpl, desk.cpl, powercfg.cpl, inetcpl.cpl, timedate.cpl and others.

  Try these in case the General corruption has a role to play:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------

  Icons do not appear in the Control Panel, or you cannot start Control Panel, Windows Welcome, or
  Games in Windows Vista
  http://support.Microsoft.com/kb/936686/en-us

  The Control Panel window will not open in Windows Vista
  http://www.tips4pc.com/articles/Windows%20Vista/control_panel_window_will_not_op.htm

  It was reported a updated driver it has blocked, so have you updated drivers
  lately? Also check the driver updates in Windows Updates.

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

  When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

  You can try to download the 64-bit version.  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

• Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Please help.

  Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not.  Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.

  You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.

• Satellite Pro 6100: error message - cooling fan does not work

  Hello
  I have a SP6100 and it keeps giving me an error message about the cooling fan does not. Then he tells me to stop immediately and runs very slowly. The fan come on, but after three or four short bursts it stops and the message appears.
  Is it a mechanical problem with the fan? I took out the radiator and the fan, and it was clean and not sticky.
  What is a system problem? The BIOS has recently been updated.
  Should I just invest in a new cooling unit and if so where would I get one?
  Any help would be greatly appreciated!
  Thank you.

  Hello

  I recommend to contact the ASP (certified partner) because it can test your device and can do a diagnostic test.
  You can be sure that the laptop will be repaired correctly 100%.

• HP 8600 over Error Message: paper detected does not match format of paper or type selected.

  HP Officejet Pro 8600 more

  Windows XP Pro, Windows 7 Pro

  Error message: paper detected does not match format of paper or type selected

  This error message appears on the printer display panel any time a custom paper size has been set up in Word (or any other application) and the format of paper & type was inserted in the Officejet Pro 8600 paper tray.  This error is generated by the printer regardless the orietation or margins or paper size settings in the document to match the paper size in the paper tray.  When you press 'OK' on the printer display panel, the printer ejects paper correctly.  Because this printer lacks a manual bypass tray, the custom paper is always inserted in the Tray1 and is the only book in this tray 1.  It's a simple tray 8600 more.

  What I am doing wrong?

  Your help is greatly appreciated.

  Unfortunately, you cannot print on a paper size "undefined" with printers. While the functionality is available in word, our printers do not recognize that the sizes of the main paper (these changes according to the country sometimes).

  The reason for this is because undefined paper sizes open the printer and the print job to a certain number of risks, including jams paper or misaligned printing. This is why the function is no more on HP printers.

  I recommend to find a type of traditional paper which is close to the size you want to print on and select in the layout of the print job as a workaround for this problem.

  I hope this helps!

• My creative application cloud told me to update my Bridge of Photoshop and Lightroom. All updates failed. All attempts have failed. I got error 49, but again does not help. What now?

  My creative application cloud told me to update my Bridge of Photoshop and Lightroom. All updates failed. All attempts have failed. I got error 49, but again does not help. What now?

  (Other relevant data)

  I had some problems with Photoshop since the last update. Whenever I close, I get a pop up that tells me that the program has failed and is looking for a solution. Sometimes, it closes with the same pop up, when I completed a heavy task memory. I use Nik and it's at the end of certain operations of Nik she does this sometimes (rarely). I need to re - register every month because otherwise, he thinks I work with a trial version.

  Hello

  Open the Temp folder.

  Clear the contents of the Temp folder.

  Disable your Antivirus and firewall computer for awhile.

  Launch Desktop CC and try to download Apps.

  You can also consult the document below.

  Error downloading creative cloud applications

  • Download error 49

• Import error: ORA-01435: user does not exist

  Hi all
  
  I am importing a dump in the Database, the dump of old financial version 6 [EBIZ] 11g
  
  I gave this command:
  
  IMP FILE = EXPDUMP. DMP BUFFER = 524288000 FULL = THERE IGNORE = Y
  Import a user and password given system...
  
  Once it has started and error
  
  + ' MODIFY USER «INFUSE' QUOTA UNLIMITED ON «OTHERD +»
  IMP-00003: ORACLE error 1918
  ORA-01918: user 'INFUSE' does not exist
  IMP-00017: statement failed with error ORACLE 1918:
  + "MODIFY USER «DUB_QUERY" QUOTA UNLIMITED ON «OTHERD +»
  IMP-00003: ORACLE error 1918
  ORA-01918: user 'DUB_QUERY' does not exist
  IMP-00017: statement failed with error ORACLE 1918:
  + "MODIFY USER QUOTA UNLIMITED ON"OEM_REPOSITORY '"+" OEMV22"
  IMP-00003: ORACLE error 1918
  ORA-01918: user 'OEMV22' does not exist
  IMP-00017: statement failed with error ORACLE 1918:
  + "MODIFY USER"W03063_ITD"QUOTA UNLIMITED ON 'TEMP' QUOTA UNLIMITED ON"OEM_R"+"
  + «EPOSITORY "«+»
  IMP-00003: ORACLE error 1918
  ORA-01918: user 'W03063_ITD' does not exist
  +. import of objects of APPS in APPS +.
  IMP-00003: ORACLE error 1435
  ORA-01435: user does not exist
  +. import objects of DUB_QUERY to the DUB_QUERY +.
  IMP-00003: ORACLE error 1435
  ORA-01435: user does not exist
  +. import objects from SYSTEM to SYSTEM.
  +. import APPLSYS objects in the APPLSYS. +
  + "ALTER SESSION SET CURRENT_SCHEMA ="APPLSYS"" + "
  IMP-00003: ORACLE error 1435
  ORA-01435: user does not exist
  IMP-00000: Import terminated unsuccessfully
  
  Kindly advice me what is evil,
  
  I created all the data of the same files as the old database. both importing all the users will created, if its OK then why this ' * ORA-01435: user does not exist * "coming...
  
  
  Concerning
  
  Paja
  
  Published by: hamza on July 2, 2012 04:50

  I created all the data of the same files as the old database. so when importing all users will be created

  In my first test I didn't create all the users before importing, just give this command all users imported without any errors.

  Assuming that 'data files' mean 'spaces', are you sure that all the storage spaces have been created (including temporary)?

  I did the same thing to dozens of times (not with a version so old, I must say), and I got these errors when some tablespace has not been created.

• ESX does not error - Host Server Agent does not start

  Hello

  I got an error on one of my ESX host in VC. The message "did not".

  7 VM are currently connected to this host and they seem to all run normally.

  I was able to connect to the host command line, but was a bit of difficulty in processing orders, they seem to cling. (ex: vmware-cmd - l does not give me an answer...)

  So I tried to restart the service mgmt-vmware:

  VMware ESX Server Host Agent Watchdog

  VMware ESX Server host agent

  This is where to stop.

  I also tried just stop the service (mgmt-vmware stop) and he still gets that far.

  Are their other commands that I might be able to run to retrieve this host in the VC?

  I will not re-start rather host it running production servers.

  Thank you

  I had this problem today with one of our ESX host. If you are running:

  ps - ef | grep vmware - pass

  You should see something like:

  root 3545 3504 1 11:40?        00:00:12 / usr/lib/vmware/hostd/vmware-hostd /etc/vmware/hostd/config.xml u

  You can kill the process of:

  Kill - 9 < PID > (e.g. kill 3545-9)

  Then you should be able to restart the service mgmt-vmware . In fact, if you are already trying to restart the service, he will suddenly hit by action. I do not know what causes this, but it will not affect your running virtual machines.

  I hope this helps.

  Ray

• RPT to Oracle 10g - REP 300 error: table or view does not exist GROUP BY...

  Hello - I have a request to the Interior of my data model that works very well when I launches the report inside reports developer & works well in TOAD. But when I try to run from our forms 10 g GUI report fails with a REP 300 error: table or view does not GROUP OF S.SOURCE_NAME
  
  Source_name is my group of field & as mentioned, it works very well to the developer reports & TOAD, so I can't understand why the GUI is having a problem. The GUI uses some features to export the data to Excel. I have no more info on how the GUI do that then maybe no one will be able to help, but if you run into this situation before, any input you have would be greatly appreciated. Thank you!

  Hello

  connect you as a user even in the forms and the TOAD?

• Error message: "Build signature does not match environment.

  Hello
  
  I had a problem when you try to access the same data to two different computers through the library of BerkeleyDB. I stored data in berkeley db to Machine_A. Then I copy the data to another machine Machine_B. When I try to open it again. It by the following error message:
  --------------------------------------------------------------------
  Create signature does not correspond to environment
  error in creating environment varialbe document 1
  --------------------------------------------------------------------
  The error message is raised by this code:
  Database db = env.openDatabase (null, null, dbName, dbConfig);
  
  
  The data are stored in native java code of Berkeley DB. In both machines, I used Berkeley DB 4.7.25.The berkeley db libraries are compiled independently on both machines. Machine_A is "Machine_A Linux 2.6.26 - 1-amd64 #1 SMP Sat Nov 8 18:25:23 UTC 2008 x86_64 GNU/Linux. Machine_B is "Linux MachineB 2.6.22 - 2-686 #1 SMP killed Aug 31 00:24:01 UTC 2007 i686 GNU/Linux",
  
  I guess the problem is because as the data itself contains version information. But it's ironic for me. The library is dependent on the computer because it is written in C, but the data must be dependent. Am I missing something?
  
  Thank you
  
  Marie-Claude

  Hello. Berkeley DB depends on having structures of uniform size for the life of the community, because these structures must be written and reading environment files. For this reason, each environment contains a signature of the size of the structure, and this stored signature is compared to a signature freshly calculated in open environment. My first guess as to why you see this error is that type sizes on Machine A (x86_64) don't match those of the Machine B (i686). To share files of the environment between 32 and 64-bit platforms, you will need to make sure that the library on the 64-bit platform uses 32-bit types sizes (4 bytes for example pointers, instead of 8-byte pointers.)

  Ben Schmeckpeper