Error Protocol in the package received from the initiator

Similar Questions

• Resettlement CS5 troubleshooting my PC had problems, so I had to upgrade to windows 8.  during installation, I received a response that my serial number was not valid.  It's the same serial number that I received from my initial order.  I disabled before

  Resettlement CS5 troubleshooting my PC had problems, so I had to upgrade to windows 8.  during installation, I received a response that my serial number was not valid.  It's the same serial number that I received from my initial order.  I disabled before the upgrade to windows 8

  Contact by web chat support.

  Mylenium

• InDesign CC Me gives an Error Message during the initial opening, then usually open to all... Help!

  I recently installed Creative cloud and I'm unable to open InDesign. When you try to open a file created in InDesign, I get an error message. Then, when I try to re - open the file (or any file) InDesign refuses to answer. The files are not open. Anyone know why this is happening and how can I solve it?

  its windows and creative cloud. I contact adobe and they had to get remote in my system to solve the problem. All is well now. Thank you very much for your help.

• ORA-01841 error loading of the initial report

  Hello
  
  I use Apex version 4.1.1.
  
  All I'm trying to do is to include a null and do NOT set a default value for the parameter of my reporting period, because I don't want the report to run when the user clicks on the tab at the top.
  
  I have the value NULL to the value and am without specifying a default value, but when I click on the tab, the report displays region always "ORA-01841: (full) year must be between-4713 and 9999 and not 0.
  
  He is obviously trying to capture the reporting period, even if I'm him giving a NULL value. I even tried to specify NULL for the default, but that no longer works. The region of the report should simply say "No data found" or something similar - no error should be there.
  
  Any ideas? Is this a known bug?
  
  Thank you
  Greg

  Greg wrote:

  The parameter is referenced in the query like this: DATE >= TO_DATE(:P15_REPORT_PERIOD||'-01', 'YYYY-MM-DD')
  AND DATE <= LAST_DAY(TO_DATE(:P15_REPORT_PERIOD||'-01', 'YYYY-MM-DD')
  

  The problem is that when P15_REPORT_PERIOD has the value null, Oracle tries to TO_DATE ('-01', ' YYYY-MM-DD'), and '01-' does not match the mask of format 'YYYY-MM-DD ".

  Try:

      DATE >= TO_DATE(:P15_REPORT_PERIOD, 'YYYY-MM')
  AND DATE <= LAST_DAY(TO_DATE(:P15_REPORT_PERIOD, 'YYYY-MM'))
  

  In addition, if the DATE is really a column name should not be: DATE is a reserved word.

  There may be a problem of logic here if DATE values contain information of time: this predicate will return all of the data where the DATE is later than midnight the last day of the month.

• is itunes error message cannot connect to my iphone because of an invalid response was received from the device

  get error message that IOS 10 unable to connect to my iphone iTunes 6 because of an invalid response was received from the device

  Make sure you are using iTunes 12.5.1 or later, as it is required to communicate to iOS 10.

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• Question ESXi 5.5 with turn a virtual computer: "an error was received from the ESX host turning on VM" '22 (Invalid argument)"'DiskEarly on a power Module failed.'

  Here's what happens when you try to turn it on one of my virtual machines (see also accessories):

  Error stack:

  An error was received from the ESX host turning on VM vzilla-ws2012r2e.

  Unable to start the virtual machine.

  Cannot open disk ' / vmfs/volumes/51286ca4-ef967828-664d-001b2129ad71/vzilla-ws2012r2e/vzilla-ws2012r2e_3.vmdk ' or one of the snapshot disks it depends on.

  22 (invalid argument)

  Power DiskEarly module has failed.

  Cannot open disk ' / vmfs/volumes/51286ca4-ef967828-664d-001b2129ad71/vzilla-ws2012r2e/vzilla-ws2012r2e_4.vmdk ' or one of the snapshot disks it depends on.

  22 (invalid argument)

  This circumstance may be linked to a sata cable issue, with the possibility of temporary loss of connectivity, which could result in data loss/corruption, I realize.  It is a laboratory box.  Especially say that the 2 VMDK he complains (trying to light) is both on the grounds of a single physical disk. Data, read and written to the speaker, since the problem are very good (which indicates the wiring problem was resolved, and the VMFS5 file system seems to be in good health).

  No photos.  No related clones.  Just a 2012 Windows Server based VM, with several drive letters in, with those underlying files VMDK residing on different stores of data VMFS5.  Implemented end (these drives aren't really so huge), but far from running out of physical space for the data either. Everything is working great for months, until today, trying to it turns on again.

  You are looking for:

  "Failure error disk beginning module lit" results in this article:

  error disk on start module failed

  which indicates the .lck files may be present.  It does not exist.

  Then upwards, of a variety of other items:

  Re: Unable to start the virtual machine: invalid argument on *-flat.vmdk

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1004232

  https://communities.VMware.com/message/search.jspa?peopleEnabled=true & userid = & ContainerType = & Container = & q = module + DiskEar...

  error disk on start module failed

  but alas, none of them seem to relate directly, or exactly.  My vmware.log file is attached below, as well as some screenshots of to show the structure of the unity of this virtual machine.  Hoping that this post proves fruitful, if anyone has had a similar situation.  The data at stake here are (mostly) redundant, but I would rather understand my way of it, in the case where it happens to me again, or can help others.  Many preferred rather than give up, reformat the VMFS and start again.

  Thank you!

  Good news, the best result I could hope. No data is lost. No corruption of the VMFS or NTFS don't drive in the virtual machine. Nice!  Saved me a few terabytes of data restoration and learned a little more on file system of troubleshooting along the way.

  It took a technician of VMware Service excellent, attentive, methodical remote 2 hours in a WebEx previously to resolve problems with these 2 files vmdk manually, because he found that there is a lock on them. I opened a request of Service (SR) # with VMware by following the instructions here:

  VMware KB: Cannot access certain files on a VMFS datastore

  To resolve this problem, apply for support from VMware Support and note this ID (1012036) Knowledge Base article in the description of the problem. For more information on the filing of a request for support, see How to submit a support request.

  I'll cover this saga and the exact process for collecting and downloading of newspapers, through to my TinkerTry.com, including the ride video.  I even captured much of the technical work that has been done. That said, it is true that little of the magic that was made to resurrect the metadata will remain a mystery, given that this piece is VMware.

  I'm ok with a bit of black box, considering how I'm happy that I got all my data, and time savings that the quick recovery represented.

  By clicking on the button "answer".

• Session INFO iscsi target - has been closed - sign-out request received from the initatior

  today all of a sudden equallogic Group Manager of its getting flooded

  target iSCSI session - was closed - sign-out request received from the initatior

  target iSCSI session - was closed – iscsi inittator connection fauilure
  no response on the connection for 6 seconds

  been trying to figure out what has changed since yesterday, nothing has changed

  the Member of 4100 not showing this info, all connected to the 6100 Member?

  side esxi 5.5 its projection lost way, restoration of path error messages

  clues

  Hello Dan,.

  This first message is normal, because this is a message of level INFO, not WARN or ERROR.  It only means that a connection has been disconnected so that it can be moved to another port in the group.   I suspect that you run MEM?   Who's going to move, start, stop to need iSCSI sessions to hold the input/output symmetrical on the ports available on the berries.

  ESXi 5.x will always report any kind of connection as an error problem.  Even when he is projected as here.  EQL uses a mandatory iSCSI command under the title "async logout" say disconnect the iSCSI initiator then go to discovery and connect immediately.  However, this time it will be moved to another port on a table.   MEM regularly consults the current connections and may decide to change the layout of the connection.

  The 6100 is probably the head of the group.  So it stores and displays all messages from all members of the group.  Buried in the text it can show you that some are from the 4100.

  The other message on the "6 sec timeout" is different.  This means that, during this period, the table failed this server.  Periodically, initiator and Exchange EQL keep packages of persistent delay.  (KATO for short).   This is so that the two are always answer.  If it fails repeatedly, this message appears and the connection is complete.  Once the initiator (server) is back, he will open a new iSCSI session to replace.   You see this message when you restart a server, or there are problems with the network.

  If you are really interested, you can open a case of pension with Dell.  Please gather the diags table (all members), config switch logs, and supports the VM node ESXi.   They can check this info and verity that the configuration is OK.    They can examine the nodes ESXI to ensure they are in compliance with the best practices with Dell's best practices.   There is a Tech report.   TR1091 that covers this.

  You can find a copy here.

  en.Community.Dell.com/.../Download

  Many problems have been resolved by choosing ESXi for current construction, set up in accordance with this document and Sunrise switches to spec as well.

  Make sure also that the EQL table running 6.0.7 or later.  Running current firmware is much better.  Earlier than 6.0.7 saw potential for corruption VMFS Datastore.  Therefore, it is very important to keep up-to-date.

  Kind regards

  Don

• iTunes could not connect to the iPhone, because an invalid response was received from the device.

  Just bought an iPhone 7 today and received the error message "iTunes could not connect to the iPhone because an invalid response was received from the device." Don't know what that means, and I have never had this problem with one of my previous iPhones. Thank you.

  You run iTunes 7.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• Invalid response was received from the device

  Now that I've updated my iOS 10 6plus my phone will not connect to my macbook pro. I get an error message stated "iTunes only could not connect to iPhone because an invalid response was received from the device. I removed the password and fingerprints, phone rebooted, macbook restarted and still does not.

  Hi kcampagna8,

  Thank you for using communities Support from Apple. We are sorry you are experiencing this problem with your iPhone. If you get an error with "an invalid response" message when you try to connect to iTunes, you can find the troubleshooting steps in the following article useful:
  
  

  Check your USB connections

  If you see the error 4005, 4013, 4014, learn what to door. If you see one of the errors below, you might have a USB connection problem:

  • 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650
  • 2000, 2001, 2002, 2005, 2006, 2009
  • An error message that includes, "an invalid response.

  Follow these steps to see if the problem is with your USB cable, a USB port or computer. Try again after each step:

  1. Use the USB cable supplied with your device. If you do not, try a different cable USB Apple.
  2. Switch to a different USB port on your computer. Do not connect on your keyboard.
  3. Plug it into another computer.
  4. If you still see the error, you can check for any other problem USB, with the third-party security softwareand the problems with hardware.

  If the problem persists, contact The Apple support.

  Get help with iOS update or restore errors - Apple Support

  Concerning

• What happens when the error report are sent to Microsoft from my computer?

  I received a call from a Clayton asked for a Windows Service Center. He called about the error reports that were sent from my computer to Microsoft. He gave his phone number as 91 9008 37 23295 in Calcutta, India. If this has nothing to do with Microsoft or Windows?

  John is correct.  And to answer your direct question: "what happens when the error report are sent to Microsoft from my computer? -Not much.  If these reports are used at all, they are used for the statistical analysis and do not respond to individuals.

• Message when you try to upgrade or install a program. "A network error occurred whtile attempted to read from the file:

  Receive the following message when you try to upgrade or install a program. "A network error occurred whtile attempted to read from the file?: MSI

  * original title - cannot open files with .msi extension *.

  You try to open this leave a link online? If yes I would like to try and save the MSI on your desktop and then try to open.

• No response received from the Symantec Server during activation.

  OT: Network network adapter Ethernet NIC wireless networking device
  I just bought Norton 360 5.0 and I can't activate it by Symantec.  An error saying "No response received from the Symantec Server" I have no internet connection, but do not understand why this happens?  This computer is Windows 7 Home Premium.  It is connected to Linksys wireless - G wireless adapt, but as I said I am able to get on the internet like MSN, Facebook, etc.

  Hi LaraAngold,

  I suggest you try the following steps:
  https://solutions.Symantec.com/sdccommon/ASP/symcu_defcontent_view.asp?ssfromlink=true&sprt_cid=c64ef7a8-111C-47d7-88ef-b8e50c5cbd0f&docid=20071025144354EN

  If the above steps fail, you will need to post your question in the following forums.
  http://community.Norton.com/

• Move a layer from one document to another, I get the error message that the layer is empty

  When I copy a layer from one document to another in PS CC 2015.5 and then try to move the layer in the destination document, I get the error message that the layer is empty.  It is not empty and I checked several times and checked that the layer is not empty.  I have never had this problem before and wonder if something has changed in CC 2015.5.

  Thanks to all who responded.  I think the problem was that I was using the NEF files and that he had not yet renamed PSD files.  Copy the layer in the destination document, but when I tried to move the layer in the destination document, I received the error message.  Apparently, he was copying the layer but there not then recognize the NEF format.  Once I saved both documents to the PSD, then the program behaved normally.  I appreciate your all of the help.

  Sue

• I can't download contact sheets to the site ftp continues to receive "an error occurred sending the file: access denied" it used 100% of the time, then about 70% not at all, having to send boards contact my clients. Using Version 6 on Imac.

  I can't download contact sheets to the site ftp continues to receive "an error occurred sending the file: access denied" it used 100% of the time, then about 70% not at all, having to send boards contact my clients. Using Version 6 on Imac. Any suggestions on how to make it work again?

  Hi Dayg,

  Please check your FTP settings in Lightroom.

  Are you able to connect and download using another FTP Client?

  Also try the steps below: -.

  1. from the Web in Lightroom module, click export instead of loading.

  2. save the Gallery to a location that you can find easily (like your desktop).

  3. manually copy the Gallery of his location to save to your FTP server.

  Let us know if that helps.

  Kind regards

  Assani

• Try to install Lightroom 5 with CC but receive error code 5 on the initial start-up of Lightroom.

  Try to install Lightroom 5 with CC but receive error code 5 on the initial start-up of Lightroom. Uninstalled all adobe, including Creative Cloud CC products.

  Followed the instructions on the forum using the soft Cleaner CC for OSX. Have rebooted several times and even tried using disk utility to repair any permission probs. Still no luck.

  The problem started to arrive from the upgrade the previous version of Lightroom to version more up-to-date. Im hoping someone can help me with ideas. Thanks heaps.

  Ended up solving the problem, not finding answers. Delete the following file

  com.adobe.acc.AdobeCreativeCloud.plist