Error reading drive hard slave

Similar Questions

• Error reading drive A: and Toshiba companion disk for 115CS

  Hi all

  I recently bought a second hand 115CS Satellite, and it has windows 95 installed. I soon discovered that my computer cannot read drive a: correctly.

  Whenever I try to copy/paste/etc, and on a diskette, the computer begins to read the disc, but before the end of the process I get an error message saying that the drive could not be read.

  I tried to solve this problem by downloading and installing the updates of different file from Microsoft and the Internet from Toshiba sites, but nothing helped. The custom Scandisk nor any system utility which would help me. I even tried to use the new disks but I always get bad sectors a reason any.

  I understand that the inability of the Satellite to read drive a: is a known issue with windows 95, and it has been discussed before. Is there a way to handle the situation outside of what I've tried so far?

  Unfortunately, because I don't have the original disks that come with the laptop, I am unable to do the diagnostic test of Toshiba on my computer to trace problems. I'd highly appreciate if you tell me where a companion of Toshiba Satellite 110CS disk is available for download online.

  I really need advice in the case that we care and will be very grateful for your help in regards to the reader of error messages and the accompanying disk.

  Best,

  Sharon.

  Hello

  It is a very old unit, and I can't tell you anything about the features but you must also known that there may be a mechanical problem and this player may also be defective. Who knows!

  Please see the Toshiba download page choose us under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp? Download? option, select model laptop, and you can see if something useful is in the list.

  Good luck!

• Satellite M70-173 - fatal error - new drive HARD and recovery.

  Excuse my lack of knowledge.

  I received a Satellite M70-173.

  to turn on before charging readings - fatal error; I have to save all my data and replace the hard drive.

  I don't know if it's fixable and that's what I have to do. I also said that when you replace a HARD disk I need a recovery disk.

  I reside in Cyprus and don't have is not easy access to the shops of style PC big supermarket.

  I was wondering if I could use a generic HDD and if so is there a particular one that I need to acquire?

  Also

  where would I go to get a recovery disk?

  I got the laptop I can't afford to buy a new one at the moment and it is still in very good condition apart from the above-mentioned problems!

  I wish that all the advice on what type of HARD drive, I would need or is available - rough cost so I don't get ripped off and if we change the disk HARD is as easy as I read. Also where I should go to get a recovery disc and if that's all I need to fix the laptop.

  Thank you very much in advance for any help I can get.

  Peter

  > The laptop does turn on - is it possible to make a recovery of a damaged laptop disk

  How do you do if you can't turn on the laptop?

  What you could do is to remove the HARD drive, then place it into the drive enclosure HARD 2.5 external, then connect the HARD drive to another computer, to save the data.

  In my opinion this is what you could do

• Remove my drive hard slave - a second version of Windows XP

  Hello. I bought a blank main hard drive for my PC, with the intention to install XP on it. During the installation process, I ended up trying to install Windows XP on my secondary drive - he was not let me install XP on my new drive. However, the installation on my secondary disk failed. In the end, I managed to install XP on my new main drive by unplugging the secondary drive.

  Now, everything works fine, including the secondary drive, but the second version of XP are still partially installed on my secondary disk. I want to delete safely, without deleting all of the other facilities/files on this drive. Probably just delete the WINDOWS directory on the second disc are always going to stay behind?

  I tried to boot the PC using only my secondary drive, to delete the windows using the installation CD, but it will not load the Windows installation program, saying there is a problem with this drive (despite me setting the bios, the jumpers and cables properly boot).

  So, does anyone know or any other method, I can completely get rid of this 2nd version of Windows on my second drive?

  Thank you very much.

  You will not be able to run all the programs that have been installed on the secondary drive, so we are only concerned about the data. The cleanest way to handle this would be to copy the data to an external USB drive, and then just format the secondary internal drive of your current installation of Windows. MS - MVP - Elephant Boy computers - don't panic!

• Reading drive hard moviefolders MCE

  I backup my dvd collection to HDD (VOB) for the streams feeding the House and can suscesfully get Win 7 to play a variety of machines.  But I've just refurbished laptop 7 ulimate Vista for my daughter and want it to be able to access the folders of this laptop wireless.

  But I can't get Vista MCE DVD library to allow me to add folders to the library (its much easier in Windows 7!).  All the links online I follwed will tell you right-click the DVD library and add the required folders.  But the Library button DVD tape of TV and movies does not meet a click of mouse r/h.  Infact, that none of the buttons do?

  And there not an option in the tasks/libraries Strip to add movie files?

  Someone at - it ideas?

  Trevor

  Hello

  -Are you getting any error code or error message?

  Please follow the steps mentioned below and get back to us with the results.

  Method 1: Fix problems with a Windows Media Center Extender device.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-a-Windows-Media-Center-Extender-device

  If method 1 did not fix the issue, please continue with method 2.

  Method 2: Perform a system (SFC) scan files Checker

  Perform a scan of the checker (SFC) system files on your computer. SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  See the following article for more information on using SFC tool to troubleshoot missing or corrupted system files:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If method 2 did not fix the issue, please continue with method 3.

  Method 3: Uninstall and reinstall the Windows Media Center.

  Step 1: Uninstalling in Windows Media Center.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer
   
  Step 2: Reinstall Windows Media Center.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on 'Windows turn features on or off".
  c. find the multimedia functions and place a check mark in front of the Windows Media Player.
  d. restart the computer and check with the question.

  I hope that helps!

• Satego X 200 21U: drive HARD internal not external usable after upgrade

  First, I changed the system to a 500 GB HARD drive, and everything was good. The old drive was not usable extern, so I left it as an emergency backup device.
  After a few weeks, I did the upgrade even to the second HARD drive, and again the old drive is not usable in my extern Dockingstation.
  Does anyone have a good idea what causes this problem? The HARD drives are locking the entire system, if I try to access and some formatting.

  Hello

  What do you mean by is not usable in my external docking station?

  I assume that you have placed the 2.5 HARD disk in a USB enclosure that allows to connect the HARD drive to the computer USB port.
  Is this good? So what harm s? Is not recognized USB HARD drive or what?
  Have you tried to connect different computers HARD drive?
  Otherwise, to do this

  But if the HARD drive is not accessible, using the case of USB, or use inside the laptop, then I would say it is a HARD drive malfunction

  Why this is happening?
  The writing and the reading drive HARD is a physical process which underline the material parts such parts can still die

• nvstor64 error - failure of HARD drive to read data

  Backup and restore system is unable to complete - after investigation, about an hour after the backup operation to the system event log records a large number of errors in nvstor64 - "failed to read data from the HARD drive" and the abandonment of the backup operation.  After investigation, I found that the nvstor64 replaced the windows driver update disk drivers HARD during a computer video card.  After many contacts with support from nvidia and further consideration, the problem is reduced to the State of the offence alleged in the second hard drive backup (Seagate 1 TB Baraccuda - development since 2/2011).  When you run the HP disk HARD diagnosis on this drive, it does not hard "SMART short self-test" step with the error message "fails first LBA 45511183".

  Here's my question.  Run the chkdsk BACK on this disc utility passes - no bad sectors.   The HARD drive is visible in the operating system and appears to be fully accessible.  I moved 100 GB of files from the disc to others in the network with no apparent problems.  This really works test by the "SMART short self-test?  This is a 'false positive' test failed?

  Paul

  Pavilion p6210f

  Windows 7 64 bit

  6 GB of system memory

  C: WD 1 TB 7200 RPM HARD DRIVE

  F: drive HARD Seagate 1 TB 7200 RPM

  Hello smithdp,
  
  The SMART test tests in-depth hard disk. Here's the Wikipedia record for the short trial (they can explain better than me).
  http://goo.GL/XYCvm.
  Short
  Check electrical and mechanical performance as well as the disk read performance. Electric tests could include a test of memory buffer RAM, a read/write circuits test or a test of the read/write head elements. Mechanical test includes seeking and servo on the data track. Scans small parts of the drive surface (area is provider-specific and there is a time limit on the test). Checks the list of areas that may be read errors in waiting. (Usually less than two minutes.)
  
  Having said that it is not perfect, because no test is, it could be bad, or it could be on-site. Sometimes the SMART test can give a warning, but the drive will not fail for another month + is just a 'heads up '.
  
  Now, with your error in particular LBA is logical block address. The error you are getting is that there is a block (45511183) that the test has detected an error on.

• I try to start the old T2150CDT - error message "not found reading drive C of the sector.

  Hello

  I came by one of them and trying to fire, but I get the message, "sector not found reading drive C". I get this message just after windows 98 logo appears.

  Problem is that I am limited in what I can do, because I don't have a floppy drive and back does not recognize the CD drive (missing drivers); Although I can hear it when starting upwards.

  So I out the HARD drive and pasted the installation windows 98 inside files. then tried to reinstall, but I still have the message of "sector not found reading drive C". The drive is too large (it's about 2.1 GB.)

  Install the right drivers for the CD Rom would allow me to install from a CD?

  It works usually
  Thank you
  John

  As far as I know the error message; "Sector not found reading drive C" appears because of these three reasons:
  -physical HARD drive failure
  -corrupted HARD drive file system
  -Bad RAM

  In the first case, you should try to format the whole HARD drive and should try to install the new OS.
  If it will not help, chances are that HARD drive is malfunctioning and needs to be replaced.

• New drive HARD & OS errors-> HP 8000 Elite Small Form Factor PC

  New drive HARD & OS errors---> HP 8000 Elite Small Form Factor PC
  
  Can not install Win XP on another hard drive
  
  I work with a...
  HP Compaq 8000 Elite Small Form Factor PC
  
  Original SATA HDD is loaded with Windows 7 Pro.
  
  In order to install a program using this PC as a digital video recorder
  I installed the video capture PCI card and related software. I had problems
  associated with software and Windows 7.
  
  I know that the software works with Windows XP.
  Do not want to remove the original HDD, I tried my win7
  to replace the HARD drive and do a clean install of XP.
  
  I get the same error during the installation of the OS.  I tried different
  SATA and different XP install disks.
  
  The error I get is shown in this photo.

  

  Original HP HARD drive is a Hitachi 160 GB
  
  I tried 2 known to be good SATA drives.
  Seagate 500GB
  WD 80 GB
  
  I checked the bios settings and even revenue tio rear BIOS
  default settings.

  I get this error even with everything I tried to do.

  This happens during the OS install just after or during the process of the installation of temporary files are current

  written to the HD.
  
  When I re - install the original HD loaded with Win7, everything works as it
  expected.
  
  Any ideas on what] s going on here?

  Hello:

  The problem is that you must incorporate the necessary sata ahci drivers for windows XP to see the hard drive.

  Has Windows 7 and XP is too old an operating system to make them.

  Read the info at the link below, section of Intel and then read the downloadable PDF document for instructions on how to integrate all the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  The only other way to install XP on this model is to go into the bios, the storage section and change the setting of sata ahci to ide emulation, save the setting here and once again, when you go out.

  The problem is that if you do this, you cannot change the setting for the preferred setting of DCIS, unless you know how to install the correct ahci sata driver after installing XP from the controller.  If you try to just change the setting back on ahci without having to install the controller driver, the PC does not start upward.

  Try "slipstreaming" the drivers first and if you can't swing, install XP in IDE mode and I'll help you get the drivers installed, so you can change the BIOS to ahci setting.

• Get several errors in the hard drive and the slowness of the system XP

  COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ?  Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,.

  * original title - mistakes, mistakes, mistakes and Everwear *.

  COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ?  Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,.

  Please be specific on what you mean by "far from many errors on the hard drive."  What kind of mistakes? Do you mean the drive read errors? Please quote the error message you get exact, verbatim.

  How many mistakes is "too much"? How many times they do they happen? They occur only when doing certain things or anything?

  If you really get a lot of the drive read errors, the drive is defective and must be replaced.

  But if you're talking about freezing, slow, etc. This is another question entirely, and I wouldn't call it 'errors on the hard drive. The little info you provided the mind, it is difficult to know what this problem is, but one of the things these days plussusceptibles is malware infection. What antivirus do you run (they are far from being just as good, and some of the most popular are among the worst). Do you also run an anti-spyware program? If not, it's * very * likelythat you are infected. I recommend that you download and run the free MalwareBytes AntiMalware to http://www. Malwarebytes.org/products/malwarebytes_free

• Drive HARD Ext cant allocated, it is said: the request could not be performed because of an i/o device error

  Hello world. IM new here.
  I would like to ask questions about the allocation of disk

  My drive HARD Ext (WD my passport) will not appear. so, I check in computer management, and my disk not allocated
  When I try to assigned by the following method
  It is said: the request could not be performed because of an i/o device error

  Please... is if everyone there a solution to this issue?

  I tried to update the firmware, WD Essential, WD utilities

  but this does not solve the problem...
  When I try to checkdisk in promptcomand but I don't know how to put it, because the drive isn't there...

  Please help me...

  Hello

  This error may be coming because of unavailable storage required for the motherboard drivers. You can follow the steps one by one, mentioned below and check if that helps.

  Method 1: Uninstall, and then reconnect the external hard drive. This method solves the problems where the currently loaded USB driver has become corrupt or unstable.

  1. Click Start, type Device Manager in the box Search
  2. Click Device Manager in the returned list.
  3. Click disk drives in the list of hardware
  4. Right click on the USB external hard drive with the question and click Uninstall.
  5. Once the hard drive is uninstalled, disconnect the USB cable.
  6. Wait 1 minute and then reconnect the USB cable. The driver should load automatically
  7. Look for the USB key in Windows Explorer

  Note: Connection of your USB external hard drive to a non powered USB hub can cause a lack of sufficient power to operate the external drive. Instead, plug it directly into your computer.

  Method 2: Install the latest Windows updates.

  This method will install the latest drivers for your external hard drive USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  If your problem still exists, go to method 3.

  Method 3: Reinstall the USB controllers. This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  1. Click Start, type device in the area Manager Search , and then click Device Manager.
  2. Expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.
  3. When finished, restart your computer. Your USB controllers will automatically install.

  If your problem persists, go to method 4.

  Method 4: Disable USB selective suspend framework. This method prevents your power off USB external drive.

  1. Click the Start button, type power management in the search box, and then click choose a power plan.
  2. Next to your currently selected plan, click Change Plan settings.
  3. Click change advanced power settings.
  4. Click in the box USBsettings, and then expand the USB selective suspend settings.
  5. Click on the area, and then click the menu drop down and select disabled.
  6. If you use a laptop, click the cell, and then click the menu drop down and select disabled.
  7. Click apply, and then click OK.

  If this does not resolve your issue, go to method 5.

  Method 5: Install the latest drivers for your motherboard chipset. This method updates the chipset of your motherboard drivers, so that your computer will use your external USB hard drive.

  1. See the documentation for your computer that will contain the name of the manufacturer of the motherboard.
  2. Visit your computer manufacturer's support Web site. For a list of the computer manufacturers support sites, visit: http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers
     (http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers)
  3. Go to their Web site to find the appropriate drivers for your motherboard. For assistance, contact the manufacturer of your computer.

  Please post with the State of the question.

• Have installed Photoshop CS4. Replaced the drive hard and now I get error code 150:30. What should I do to get it working again

  Have installed Photoshop CS4. Replaced the drive hard and now I get error code 150:30. What should I do to get it working again

  Migration of CS4 breaks the license. That's what 150:30 means. Assuming you are using a Mac.

  You can use the Terminal method to repair the license... but I stress that carefully read you and understand the instructions here before you run it. beginning

  # 11. https://forums.Adobe.com/thread/1714695

  If this isn't what you want to do, you have to reinstall.

  Gene

• Error: 4M0T/4/40000003: drive HARD-1287

  I have problems with my iMac 27 "2011 with El Capitan.

  I run the Apple Hardware Test and found this error: 4M0T/4/40000003: drive HARD-1287.

  What it means?

  Thank you, Lucas.

  This means that you have hardware problems that must be addressed. Probably your HD sensor, fan or has failed. Take the machine to your local Apple service provider authorized to repair, if you do everything in your area, please click on the link of the Service Provider Locator allowed Apple to begin to find a.

  Good luck.

• Computer XP does not start all of a sudden. Drive hard Self Test error #1-07 Fail. How can I find the meaning of this error of hard disk?

  Computer XP does not start all of a sudden.

  My computer is a HP Lap Top Model zd8000 bought in 2006.  Never had a problem with it before.

  Drive hard Self Test error #1-07 Fail.

  How can I find the meaning of this disc hard test error message?

  Thank you

  I tried the suggestion using chkdsk/r

  The computer ran for a long time, but the computer worked once the process is complete.

  First thing I did was back up my data, I was real worried.

  Thank you very much!!!

• Can I use my hard drive as slave on my laptop?

  My Dell Dimension 9100 does not work and I would try to run the hard drive as slave on my PC toshiba laptop. Is it possible or it would have to do on another office?

  Thank you
  Danny

  Hey Danny,

  ·         What exactly is the problem you are having with the Dell computer?

  Most laptops will not accept that the two internal hard drives.

  You will need to check with the manufacturer of laptop for more information on the connection of two hard drives to your particular model.

  You can also use a USB hard drive which you can then use to retrieve the data on your hard drive to the laptop via the USB port.