Error reading file in Photo Editor

I have a Kodak EasyShare C813. When I download the videos/photos to my computer, I go to the Start Menu, then pictures. I can see the thumbnails load, but when I click to see the images (majority around 1.1 MB), Microsoft Photo Editor (MPE) opens with a reading of l 'oading' window - and goes directly into a pop up window reading - "!" Error reading file. "I can open the files with Internet Explorer and paint, but it cannot change them as needed as the EMT cannot read the file.
My version of Microsoft Photo Editor is 3.0.2.3

Hello BROOKEANNA,

Thank you for using the Microsoft Windows Vista Forums.

The pictures you are not able to load, they are in a different format that the other photos you can see?   This subject has always taken place or something recently?   You have changed something with your operating system before this problem?

Please let us know status!
Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Error reading file Photo Editor

    I have a Kodak EasyShare M853. When I download the videos/photos to my computer, I go to the Start Menu, then pictures. I can see the thumbnails load, but when I click to see the images (majority around 1.1 MB), Microsoft Photo Editor (MPE) opens with a reading of l 'oading' window - and goes directly into a pop up window reading - "!" Error reading file. "I can open the files with Internet Explorer and paint, but it cannot change them as needed as the EMT cannot read the file.
    My version of Microsoft Photo Editor is 3.0.2.3 and Vista Home Premium operating system
    Before I had a Kodak DX7440, and never had any problems!
    A previous comment to Brookeanna did not have a real solution!

    Hi Ben Verhoof,.

    Thank you for writing to Microsoft answers Community Forums.

    Microsoft Photo Editor is supplied with Microsoft Office 97 and the stand-alone versions of Microsoft Word 97 and Microsoft PowerPoint 97. Microsoft Photo Editor is installed when you perform a custom installation, or full from the CD-ROM.

    What is the format of the files you are trying to view?

    The link below talks about Photo Editor. Try to look at the troubleshooting section in the article below

    General information about Microsoft Photo Editor:

    http://support.Microsoft.com/kb/169938

    If you have still questions I recommend checking out the resources of the Office Suite and would be better suited to the community of the Office Suite. This is a support forum for Windows Vista. Please visit the link below to find a community that will provide the support you want.

    http://www.Microsoft.com/Office/Community/en-us/default.mspx

    I hope this helps.

    Let us know if you need more assistance.

    Kind regards

    Sharath

    Microsoft Answers Support Engineer

  • Error reading file

    When I download pictures from the memory card and try to visualize a small box arrives marked Microsoft Photo Editior error reading file

    Microsoft Photo Editor is an obsolete program that
    has been abandoned in 2003. Might be interesting to try
    Set your image to a more recent application associations...
    Windows Live Photo Gallery for example.

    Windows Vista - how to associate a file Extension
    Type with a program under Vista
    http://www.Vistax64.com/tutorials/69758-default-programs.html

  • How to restore the documents now say "error reading file"?

    I have a certain recorded documents I can't view... They are still there, but when I try to view them I always get the message "error reading file" many of them are imprtant to me and Iunfortunately cannot replace them. Even when I find out my back up, I still cannot get them.

    Help!

    Hello

    1. what documents do you speak?

    2. were you able to view these files before?

    3. don't you make recent changes?

    I suggest you try to restore the computer to an earlier point and check if it helps:

    http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

    It will be useful.

  • Adobe Error 1305 error reading file... and you have access to it?

    Adobe Error 1305 error reading file... and you have access to it? Can someone help me with this? I am trying to install Acrobat Pro XI

    See if any of the instructions in the following link contribute to solve the problem:

    http://helpx.Adobe.com/Creative-Suite/KB/error-1305-try-install-product.html

  • ERROR READING FILE in microsoft photo editor

    I get this message if I try to open an image (new or old). To my knowledge we are not doing nothing differently when we load the digital camera. Here are JPEGs. The help topic makes no sense because the guests do not match my guests of computers. I can't find Office 2000 or Microsoft Photo Editor under programs in Control Panel. I thought that perhaps a uninstall/reinstall would be useful.

    If you prefer to continue using the Photo editing software...
    I have no solution for you. Maybe
    someone else offers you assistance.

    BTW... If you do not want to change your image
    as explained in my previous associations
    message... try to access your photos from
    your folder my pictures and not from Photo
    Editor in Chief.

  • MICROSOFT PHOTOEDITOR ERROR READING FILE

    A FEW PHOTOS MORE OLD ONES SEEM TO BE READ OK BY THE PHOTOEDITOR.  MORE RECENT, I ENTERED IN THE COMPUTERIZED FILE DO NOT CORRECTLY READ BY THE PHOTOEDITOR

    It is not on the size of the file but the pixel dimensions.
    The best quality your D200 will produce an image
    3872 x 2592. It would be 10,036,224 pixels that
    is twofold, the maximum that I could open in my version of Photo
    Editor in Chief. And... BTW, this total number of pixels is where they
    designation of 10.2 megapixels for the D200.

    FWIW, there are a lot of free image editing programs
    You can download on the net.

    A few examples if you want to experiment with:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    IrfanView and IrfanView plugins
    http://www.download.HR/download-IrfanView.html
    (scroll down a bit for the download links)
    (Download plugins too)

    XnView
    http://www.XnView.com/en/XnView.html

    FastStone Image Viewer
    http://www.FastStone.org/FSViewerDetail.htm

    Picasa
    http://Picasa.Google.com/

    Paint.NET
    http://www.getpaint.NET/features.html
    (Requirements: .NET Framework 2.0)

    Serif PhotoPlus Starter Edition
    http://www.serif.com/free-photo-editing-software/PHP-se.asp

    GIMP
    http://www.GIMP.org/

  • I can't install my game START OF DARKNESS BLADE, coz every time I try it repeat, error 1305. Error reading file!

    I have a START BLADE OF DARKNESS game, whenever I try to install an error message appears saying: Error 1305. Error reading the file.

    I don't have a clue guys! Any suggestions would be greatly appreciated.

    Thank you...

    Micky.b

    [Moved from comments]

    Hey Micky,

    Until we provide troubleshooting steps, we would like to know as a result of information from you.

    (1) what version of the Windows operating system you have installed on your computer?

    (2) how you try to install the game? What is a disk installation or a set of file?

    If you try to install the game on Windows 7 or Windows 8 so I would like to inform you that there are few games that are not compatible with these operating systems. You should check from the link below. However if it shows that the game is not compatible then you can install the game in compatibility mode.

    Compatibility Center

     

    http://www.Microsoft.com/en-in/Windows/compatibility/WIN8/CompatCenter/home?language=en-us '

    You can follow the links given below to install the game in compatibility mode.

    For Windows Vista: Make older programs run in this version of Windows

    http://Windows.Microsoft.com/en-in/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

     

    For Windows 7: make older programs run in this version of Windows

    http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

    For Windows 8: make the programs more compatible with this version of Windows

     

    http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

    If you still experience the issue I suggest you to contact forum support Severance Blade Of Darkness.

    Feel free to write us if you have any further questions. We will be happy to help you.

  • ORA-29284: error reading file

    Hello

    You need two flat files on a privilege of 2000.

    1. read a file. CSV
    2. keep a regular, unformatted table information

    Here are the steps I did to reach the first goal...

    1 TEST READING FILE

    CREATE OR REPLACE DIRECTORY PUBLIC_ACCESS AS 'C:\REPORTES_REY ';
    GRANT READ, WRITE ON DIRECTORY PUBLIC_ACCESS TO THE PUBLIC;

    -THIS PL / SQL works well...

    DECLARE
    utl_file.file_type v1.
    VARCHAR2 (600) v2;
    Start
    v1: = utl_file.fopen('PUBLIC_ACCESS','prueba20110218.csv','R'); -WORKS WELL...
    -v1: = utl_file.fopen('PUBLIC_ACCESS','sui_facturacion_alcantarillado_15085_2011_01_76845_001.csv','R');
    loop
    Start
    UTL_FILE.get_line (v1, v2);
    dbms_output.put_line ('el contenido del archivo're: ' | v2);
    exception
    When no_data_found then
    "exit";
    end;
    dbms_output.put_line ('-');  LINE BREAK
    end loop;
    UTL_FILE.fclose (v1);
    exception
    while others then
    dbms_output.put_line (SQLERRM);
    end;
    /


    but when you change the name of the prueba20110218.csv-> card file sui_facturacion_alcantarillado_15085_2011_01_76845_001.csv shows the following error

    ORA-29284: error reading from file+.


    -This error be?



    Thank you for the attention and offered cooperation...

    Nice day...


    REYNEL SALAZAR MARTINEZ
    Cali-Colombia

    Rey-user6318244 says:

    I do not understand the error-> ORA-06502

    This means that you read from the file exceeds 800 characters/bytes and cannot fit into the variable v2 which is declared as varchar2 (800). Try the growing size of v2:

    VARCHAR2 (1024) v2;

    SY.

  • Error reading file using clob.

    I have to read a file line by line and put it in a plsql table.

    I have the following code

    FUNCTION to CREATE or REPLACE f_load_file_AB1 (p_dir IN VARCHAR2, p_filename IN VARCHAR2)

    RETURN VARCHAR2 IS

    Clob_tabtype. ARRAY TYPE IS CLOB

    INDEX OF DIRECTORY;

    Recseq_tabtype TYPE TABLE IS NUMBER

    INDEX OF DIRECTORY;

    clob_tab clob_tabtype;

    recseq_tab recseq_tabtype;

    l_bfile BFILE.

    l_clob CLOB.

    lang_ctx NUMBER: = DBMS_LOB.default_lang_ctx;

    attention NUMBER;

    DST_OFFSET NUMBER: = 1;

    offset NUMBER: = 1;

    l_charset NUMBER: = NLS_CHARSET_ID ('UTF8');

    l_line_clob CLOB: = EMPTY_CLOB;

    l_offset NUMBER: = 1;

    Line_Count NUMBER: = 0;

    line_loc NUMBER: = 0;

    PRAGMA AUTONOMOUS_TRANSACTION;

    BEGIN

    P_dir of IF p_filename don't IS NOT NULL AND IS NOT NULL THEN

    l_bfile: = BFILENAME (p_dir, p_filename);

    DBMS_LOB.CREATETEMPORARY (l_clob, CACHE = > FALSE);

    DBMS_LOB. OPEN (l_bfile, DBMS_LOB.lob_readonly);

    DBMS_LOB.loadclobfromfile (dest_lob = > l_clob,)

    src_bfile = > l_bfile,

    amount = > DBMS_LOB.getlength

    (l_bfile),

    dest_offset = > dst_offset.

    offset = > offset.

    bfile_csid = > l_charset,

    lang_context = > lang_ctx,

    WARNING = > warning);

    DBMS_LOB. CLOSE (l_bfile);

    -total number of lines in a file

    Line_Count: = REGEXP_COUNT (l_clob, chr (13): 10;)

    DBMS_LOB.CREATETEMPORARY (l_line_clob, CACHE = > FALSE);

    -extract line by line

    I'm in 1.line_count LOOP

    line_loc: = DBMS_LOB. INSTR (l_clob, chr (13) |) Chr (10), 1, i);

    line_loc: = line_loc - l_offset.

    l_line_clob: = DBMS_LOB.substr (l_clob, line_loc, l_offset);

    l_offset: = l_offset + line_loc;

    l_line_clob: = REPLACE (REPLACE (l_line_clob, CHR (10)), CHR (13));

    IF DBMS_LOB. GETLENGTH (l_line_clob) > 0 THEN

    clob_tab (i): = l_line_clob;

    recseq_tab (i): = i;

    END IF;

    END LOOP;

    -Extract the last line

    l_line_clob: = DBMS_LOB.substr (l_clob, dbms_lob.getlength (l_clob), l_offset);

    l_line_clob: = REPLACE (REPLACE (l_line_clob, CHR (10)), CHR (13));

    IF DBMS_LOB. GETLENGTH (l_line_clob) > 0 THEN

    (line_count + 1) clob_tab: = l_line_clob;

    (line_count + 1) recseq_tab: = + 1 line_count;

    END IF;

    DBMS_LOB.freeTemporary (l_line_clob);

    end if;

    return "thatsit;

    end f_load_file_AB1;

    I am facing problem to end while trying to free clob. Line DBMS_LOB.freetemporary (l_line_clob);

    If the size of my file is more than 32767 characters I get error

    ORA-06502: PL/SQL: digital error or value: specified incorrect LOB Locator: ORA-22275

    ORA-06512: at "SYS." DBMS_LOB", line 818

    ORA-06512: at "HR. F_LOAD_FILE_AB1', line 71-> that points to DBMS_LOB.freetemporary (l_line_clob); line of code.

    To resolve this issue, I added l_line_clob: = to_clob(' '); line just before DBMS_LOB.freetemporary (l_line_clob);

    Now, I get no error but I want to know the root cause of this problem and also a good solution.

    Thank you

    Ankita

    The problem is not with the length of l_clob itself, but the way that use you it in dbms_lob.substr for your last line

    DBMS_LOB.substr returns a null value if amount > 32767

    And a null clob cannot be released

    And also if you have a last blank line, i.e. two crlf at the end of l_clob freetemporary cannot too

    For example, it will work

    declare

    CLOB l_line_clob;

    Start

    l_line_clob: = dbms_lob.substr (' ', 1, 1);

    DBMS_LOB.freeTemporary (l_line_clob);

    end;

    And it will not

    declare

    CLOB l_line_clob;

    Start

    l_line_clob: = dbms_lob.substr (' ', 0, 1);

    DBMS_LOB.freeTemporary (l_line_clob);

    end;

    The best option is to check the clob before releasing it

    declare

    CLOB l_line_clob;

    Start

    l_line_clob: = dbms_lob.substr (' ', 0, 1);

    If l_line_clob is not null

    then

    DBMS_LOB.freeTemporary (l_line_clob);

    end if;

    end;

  • PDF Settings "Adobe" error reading file in: C:\ProgramData\Adobe\Adobe PDF\Settings\Standard.joboptions

    Hi, I have the following case. When I try to print to (create) a PDF file by using Office or any other Windows application that can print, I get the following error: "error in reading of Adobe PDF settings file: C:\ProgramData\Adobe\Adobe PDF\Settings\Standard.joboptions. I tried to do what you suggested in similar cases but did not work. I have Adobe Acrobat Standard 10.1.6 and I had this problem since my update to this version. I can not print even with different settings than the "Standard.joboptions".

    Any idea?

    Thank you

    Vassilios

    Please try the following steps

    1. open the Control Panel / dialog 'Regional and Language Options' on XP and Windows 7

    2. click on the button 'Customize' tab 'Regional Options '.

    3. Select decimal as "decimal symbol". Press OK, apply

    4. launch Distiller

  • Error 1305 - error reading file C:\Users\Davy Ravenhorst\AppData\Local\Adobe\...

    Hello! I tried to download Adobe Reader 9.3 your website (www.adobe.com), have successfully downloaded, but when I tried to install it, I got this error:

    Adobe Reader 9.3 Install Error.JPG

    Do you know how I can install it so it will read this file? I'm not computer savvy, so I don't want to mess with the security properties of this file, or do anything else with it (or even anything) unless you're sure you know how to make, so it is not mess up my computer. Please help me install this program! Any help on this is always greatly appreciated!

    Thank you.

    You are able to go to this location of file?

    C:\Users\Davy Ravenhorst\AppData\Local\Adobe\...

    Are the acroread.msi there?

  • Panic: Error Reading File: install.tgz - 3,.

    Hello

    I'm trying to reinstall ESXi on a Dell PowerEdge 6450.  It was previously run on this server, but the HARD drive was to be awarded to another location.  I placed a SCSI drive in one of the bays.  It has 4 GB of RAM.  I tried both the ESXi 4.0, 3.5, and 3.5 with Dell support downloads.  All pass abot 90% of the way in which the initial ESX spashscren that says "Loading VMWare ISO" and then returns the error in the subject of this post.

    A few considerations:

    • This is a brand new HDD formatted, so there is no Dell partition

    • I get a message at the start that "If you are installing or reinstalling the operating system please use the Dell OpenManage Server Assist CD.  When I boot on this cd it asks me to insert my recovery disk, I did not.  I guess it tries to access the utility partition that is no longer there so he asks the files on a diskette.  I am not familiar with Dell servers, I raise this question because I'm not sure what the OpenManage CD should do with a facility and whether it would apply to an ESXi installation, and my problem here.

    • I tried to re - download in order to exclude a corrupted download.  I also tried several burning software.

    • I know that ESXi is installed on this server before I got it.  I don't know what version.

    • I travelled the ISO and confirms that install.tgz is in fact

    Thank you!

    I have a check against the downloaded file's md5 checksum and the CD that you create. The checksum value is on the page where you downloaded the image and you can find with Google md5 checksum programs. I'd like to see if you can use a different CD-ROM drive for installation (external USB).

  • Errors reading files when installing the oe schema.

    Hello

    I am new to Oracle and I've been playing with the hr sample schema that is included with Oracle 11 g XE (installed on a computer running Windows 7). I downloaded the oe of the otn site schema and I try to install the database. I pasted the errors I receive in sqlplus below.

    I guess the ' cannot open * .sql "errors are because oracle is looking for them in a different directory. These files are present in the same directory that oe_main.sql I specify at the beginning of the location. Must it not be enough?

    Thank you
    Aditya

    #####################################################
    SQL * more: version 11.2.0.2.0 Beta on my 27 Jun 13:45:03 2011

    Copyright (c) 1982, 2010, Oracle. All rights reserved.

    SQL > connect sys as sysdba
    Enter the password:
    Connected.
    SQL > @?/demo/schema/oe/oe_main.sql
    Enter the value for sys_password: oe

    Deleted user.

    old 1: CREATE the USER IDENTIFIED BY OE / seeder
    new 1: CREATE USER OE IDENTIFIED BY EO

    Created by the user.

    old 1: TBS and ALTER USER DEFAULT TABLESPACE OE
    new 1: ALTER USER OE the DEFAULT TABLESPACE users
    2 old: QUOTA UNLIMITED and TBS
    2 News: users QUOTA UNLIMITED ON

    Modified user.

    old 1: ALTER USER OE TEMPORARY TABLESPACE & ttbs
    new 1: temp ALTER USER OE TABLESPACE TEMPORARY

    Modified user.


    Grant succeeded.


    Grant succeeded.

    Connected.

    Grant succeeded.

    Connected.

    Modified session.


    Modified session.

    SP2-0310: cannot open the file 'oe_cre.sql '.
    SP2-0310: cannot open the file 'oe_p_cat.sql '.
    SP2-0310: cannot open the file 'oe_p_pi.sql '.
    SP2-0310: cannot open the file 'oe_p_cus.sql '.
    SP2-0310: cannot open the file 'oe_p_ord.sql '.
    SP2-0310: cannot open the file 'oe_p_itm.sql '.
    SQL >

    Published by: 868550 on June 27, 2011 01:26

    Hi Aditya,

    I guess the ' cannot open * .sql "errors are because oracle is looking for them in a different directory. These files are present in the same directory that oe_main.sql I specify at the beginning of the location. Must it not be enough?

    N ° main script calls the indices related to the directory, you started your sqlplus of. You need to replace by * / demo/schema/oe *, start +@oe_main.sql+ it and the installation should finish without further questions.

    -Udo

  • Error reading from a text file?

    Hello

    I am trying to add a NI SOFTMOTION TABLE in my project using a text file that contains the data points I want to use to make a contour move, and Labview opens but returns an error message me "ERROR READING FILE". In fact, I see all my points in the table in Labview, but it creates one more line to each column where a "unreadable" message just wrote.

    No idea how solve it?

    Thanks in advance!

    Just shooting in the dark:

    in the photo, it seems that there is a problem with the last line of the file,

    This is an "empty" one (only an end of line).

    What happens if you remove this line empty?

    Marco

Maybe you are looking for