Error recovery: 10-FC10-0017

I accidentally received a Virus its called 2008 XP Antispy.
Well I tried to remove it with Norton / windows Defender / 1-2-3 anti spy on (from my U3 flash drive) well after 15 minutes my computer crashed.
So I inserted the recovery disk and whenever I get to half way he writes:

ERROR
An error has occurred.
ERROR: 10-FC10-0017
-----
Error recovery.
Please press ok to turn off the computer.
===============================================

and so I do, and then the system starts and then shows this:

BOOTMGR IS MISSING
PLEASE PRESS CTRL + ALT + DELETE TO RESTART YOUR STSTEM.

What can I do?

Thank you
Darkmage

Hello

I think there could be something wrong with the HARD drive I n t mean that the disc is faulty, but maybe a few corrupted partitions or whatever

So it would be desirable, and recommend that you format the HARD drive first.
Usually, this should be done using the Toshiba Recovery DVD but try to format the HARD drive using an original CD of Windows XP.

After the HARD drive has been formatted, try to start again using the Toshiba Recovery DVD

Tags: Toshiba

Similar Questions

  • Satellite L45 recovery stops at 17% - ERROR: 10-FC12 - 045D - error recovery

    Well, the other day my L45 frozen, so I restarted it-to find that was missing a file of the operating system.

    So, I tried the system restore, and it ran until the end where he said he had a problem and closed.
    Then I tried the recovery disks. He ran everything from disc 1 to disc 2, began to restore, and then stopped at 17% restored.
    I tried the disks several times again and again, it stops at 17% and gives me "ERROR: 10-FC12 - 045D"-"error recovery".

    I looked everywhere for this error is specific to, but got no results.

    Really, I don't think you can find explanations for this mistake because Toshiba use software RECO for the installation of the OS. My experience says that, in this case, there are two possibilities: either is defective recovery CD/DVD or HARD drive do some problems.

    I recommend getting the facilities original Microsoft CD and try to install clean Windows if the facilities procedure finishes successfully. If maybe it is really defective HARD drive and after 17% there is a bad sector.

    Check it out. In any case I recommend you contact the service provider authorized in your country. They can say with certainty what the problem is here.

  • Windows error recovery, "load failed with error 1009 (STHIVE #0).

    Hello world

    This problem occurred to me yesterday. When I started windows, there is here a dialog box saying "Windows Error Recovery" and below, is

    "Unable to start Windows. A recent hardware or software change might be the cause. "(I don't remember changing anything)

    "If windows files have been damaged or misconfigured, startup can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. »

    There are two options it saying

    -Launch Startup Repair tool

    -Start Windows normally

    When I clicked on start Windows normally, seems that Microsoft Corporation loading bar never ends

    When I clicked launch a startup repair... A box named "Startup Repair" appeared, saying "Startup Repair is checking your system for problems..." "But after that, it seems that nothing had changed. When I opened my laptop once again, he went to the dialog box saying "Windows Error Recovery" again.

    What should I do now?

    My laptop is "Compaq Presario V3500"

    Also, I see that this tread on Compaq.com http://support.hp.com/us-en/document/c01612373 is it safe to do? I ' ts ok for me to lose all my files just to repair this laptop...

  • Equium P300-16 t - Windows error recovery screen

    It started with not to connect to the internet and to say that something did not launch. I looked on the forum and he said press F8 chose the first option (to fix your computer), I did.

    Then he took me to a with option 2 windows error recovery
    -Launch Startup Repair (when press screen becomes black for 1 second, then goes back to the same screen)
    -Start windown normally (when press turns the computer on and back on bringing me back to the same screen)

    Now when I turn it on charges it takes me to the windows error recovery screen. And no matter what I push on I always end there.

    Hope someone can be useful

    Hello

    Looks like something was wrong with the recovery process and now Windows may start t. Maybe something messed with the registry or a few important Windows files, so I think that the only option to get rid of it using the Toshiba recovery disc. It will wipe the entire HARD disk and restore the factory settings, normally it should work.

    Just so enter the Toshiba Recovery disk and follow the instructions on the screen. Windows will be reinstalled, and you get back to factory settings. :)

  • Re: Satellite A500 - Windows error recovery

    I have a problem with my laptop

    When I restart my laptop, it tends to be stuck on this windows error recovery screen. It gives me two options
    (1) Lauch Startup Repair
    (2) start Windows normally

    Tried both, it turns off, reboots that it ends on the same screen over and over again. Tried to access it via safe mode, nothing helps. tried to fix it through windows disk 7, did not work. tried last good configuration, not good either.

    It's the screen that I always end up and it does not go further.
    http://I585.Photobucket.com/albums/ss297/fobssquad/P1010014.jpg

    Please can someone show me a few guidelines as to how can I do to fix this problem. I'm a freshman in College, I have no money to take it to a professional. That's why I try to fix it myself as I have urgent need.

    Thank you in advance.

    Hello

    Hmm, not easy, but in my opinion it s something wrong with properly installed Windows OS and HDD recovery doesn't work

    You have the Toshiba Recovery disk?
    If Yes, you can use it to restore the original settings windows. Just boot from that disk and follow the instructions on the screen, everything that s! :)

  • Question - loop on Satellite L350-170 Windows error recovery

    Toshiba Satellite L350-170 - Intel Pentium Dual Core T3200 2.00 GHz, 2 GB, 250 GB, 17 "TFT, DVDSM, VHP

    My wife bought three weeks ago. Use of the lamp. Everything works fine, until a dialogue of "Startup Repair" appeared. Since then, the machine starts.

    Machine goes into "Windows Error Recovery" immediately after the Toshiba start screen and has the following options;
    (1) run the Startup Repair tool
    (2) start Windows normally

    Option 2 results in a blank screen and finally goes back to the screen "Windows Error Recovery".

    Option 1 has the reboot dialog box;

    "Your computer was unable to start.
    Startup Repair is checking your system for problems... »

    At this point, the Toshiba laptop enters an endless loop.

    So what I do now? There is no disc came with the laptop, so I can't reinstall the operating system. The dealer (Comet) is less useful and don't know no refund or Exchange for a defective product.

    Can someone please!

    Try this:

    Press F8 immediately after that the laptop has been turned on.
    Then choose the first option called fix my computer.
    Then a new window should open and there you can choose the option called Toshiba recovery.

    Please note then this procedure would start the Toshiba HDD recovery and the BONE to relocate again. This would be to format the whole HARD drive and set the OS to the factory settings.

    In my eyes, you can use this procedure for recovery of HARD drive, or you can try to reinstall the OS using the Toshiba recovery disc.
    Both lead to the same results

    Good bye

  • Re: Satellite P200 - error recovery

    No sound has take me the opportunity to use the Toshiba recovery disks.
    After that the 1st disk it has little at the end, the error message is displayed

    Preinst6.swm
    Type: stormwater management
    File size: 644 Meg
    Updated: 27/06/2007 20:06

    Three options are offered Try Again - Skip - Cancel.

    I tried to try again two times
    I tried to blow it twice with no result.

    When I select option (Skip) I am directed to install Recovery Disc 2.

    After it installs, I show the
    Error message:
    Boot MGR is Missing and charged with using CTRL + ALT + DELETE to restart.

    Once it's done
    : Error recovery 10-fc06-0002
    Please press (OK) to shut down the computer.

    Any assistance with this drama would be greatly appreciated

    Hello

    First of all, you should tell us what phone you use.

    Have you checked the disk for recovery if it s rough or something else?
    You can install Windows from a Microsoft installation disc?

    In your case, I would try to format the HARD drive before using the Toshiba recovery disc. To format the HARD drive, you can use a Windows XP disk for example.
    Check it!

    Good bye

  • Error recovery Windows on Equium A210

    I have a series of A210 running Vista. When you turn on the laptop, I get "Windows recovery error. I then get two options 'Launch start repair' or 'Start windows normally', if I select 'Launch Startup Repair' I get a message: "system recovery options. Cannot start the installed program. Click OK to turn off the computer "by selecting"Start windows normally"round loop"Windows error recovery"message."

    This message appeared without any previous problems with the laptop or Vista.

    Any ideas on how I'll be back to normal use?

    Hmmm don't look good buddy.
    According to your message, you are not able to boot in Vista or using of the * "Launch Start up repair" * or * "Start windows normally" * procedure

    Unfortunately, I put t see any other possibility as to take the disk recovery and recovery of the laptop.

    It looks like a serious system problem that can be solved only by using the recovery disc and reinstall new OS.
    But note; the recovery disc formats the drive HARD integer for you will lose all data :(

  • Error recovery MStudioDAQmx.2010.msm dependence * URGENT

    I have a solution, Visual Studio 2012, targeting .NET 4.0 with a project of installation program InstallShield 2015. There are two projects in the solution containing references to:

    NationalInstruments.DAQmx 15.5.40.109 and

    NationalInstruments.Common 15.1.40.49152

    This is the DLL that is contained in the 'in progress' folder for the download of 15.5 DAQMX.

    In an attempt to build the Setup program I get two errors in Installshield

    -4072: error recovery addiction Module_Id_Common_2010_32:1033 to c:\program files (x 86) \common files\merge modules\MStudioDAQmx.2010.msm

    -4072: error recovery addiction Module_Id_Common_2010_32:1033 to c:\program files (x 86) \common files\merge modules\MStudioDAQmx.2010.msm

    I assume that it is a mistake by project.

    I have urgent need to deploy an updated installation and I'm completely stuck at this point. I tried to add these prerequisites through explicitly in the MSM file (since it has two or three prerequisite showing all with the same generic name and no way to tell them apart) and it did not help. I searched my entire PC for this MSM file and it only appears in the directory named in the error message is not any kind of difference between the different versions in different folders.

    In fact, I DIDN'T have to group the installer of data acquisition (manually install us the runtime anyway) but I can't seem to find a way to stop the system to detect and want to consolidate.

    The problem is two-record:

    1. the problem does NOT occur on the DAQmx 15.1 it happens to 15.5; If the project is built with DAQmx installed 15.1, dependence analysis works perfectly and the project builds

    2. due to the #1, InstallShield points to the modules of NEITHER say "DAQmx is not an InstallShield module, and since he has just updated their module you should contact the vendor of the module.

    I bypassed myself the problem by adding specifically excludes for DAQ in the Installshield include/exclude XML files so that the dependency scanner would go against the DLL DAQmx 15.5 and then manually including the DLL required two in my project.

  • When I turn on my blue screen laptop appear after windows error recovery windows also appear

    When I turn on my laptop, a blue screen appears after windows error recovery windows appear also... ask in safe mode are normal windows startup?... what I can do... is a problem on my system?... Please help me...

    Hello

    ·         What operating system is installed on the computer?

    ·         What are the error messages that are displayed on the blue screen?

    ·         Did you make any changes before the show?

    In the recovery menu, select Safe mode and check if you can connect?

    You can also try to restore the system in safe mode.

    If you are able to boot to the desktop in safe mode, then I suggest you put the computer to boot in safe mode and check if it helps:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Reference: resolution in Windows 7 stop errors (blue screen)

  • affected; error recovery Thotkey has no code error 0 x 00031402, 0 x 00000002

    whener I start computer running Windows XP Home edition, I get this error message, I have X, but the start-up delays:

    "
    affected; error recovery Thotkey has no code error 0 x 00031402, 0 x 00000002.
    Suggestions please...
    Thank you

    Hi initty,

    1. Did you the latest changes on the computer?
    2. What is the number and the model of the computer?

    Method 1

    If you are using a laptop, I suggest that you update the drivers for the touchpad from the laptop manufacturer's website and check if it helps.

    Method 2

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

  • PC happens in windows error recovery

    I looked for further discussions but not find answers for help. PC is windows error recovery message. I was able to boot in safe mode and then tried a system restore. Once ran that I found myself with an empty screen, it restarted and went immediately to the same error message. Now an option if safe mode or normal.it appears.to.start booting.and then just be going empty screen or error message. I do not have the original vista disc and do not have access to one. Any other suggestions?

    If you have problems locking it with the disk, let us know.

    You can make a tool of startup repair, System Restore, etc from a disk of Vista from Microsoft:

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

    But to do a repair upgrade installation, Vista runs in Normal Mode not Safe Mode.

    See you soon.

  • Loop Windows error recovery

    Recently, my computer went into a loop of infiniate on the windows error recovery screen. I tried all modes of windows startup, but it loop right there. I also tried to put in my Windows Vista DVD to repair it, but he does not read it as a drive. I have no idea what to do. Can someone please.

    It was worth a shot here. Thanks for trying to help. I'm going to their contract and see what happens.

  • Windows error recovery. Windows could not start... _

    My Dell laptop I have from 10th July indicates the following:

    Windows error recovery

    Windows could not start.  A recent hardware or software change might be the cause.

    If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, chose to start windows normall7

    Start the reboot system (recommended)

    Start Windows normally

    The two options to return to the same screen.

    I tried the menu under the F keys, but all options listed do not seem to do anything.  I talked to Dell who ran a diagnostic test on the portable equipment and everything was ok.  They wanted then £70 the issue above which I am unhappy that have not had the laptop for a year yet!

    I would be very grateful if you could help!

    Thank you

    Mark

    Hello mtb123,

    1. have you tried the steps suggested by Srinivas R in the previous post to make a startup on your computer repair using the Windows installation disc?

    2. you remember what changes you made to the computer before you start this error?

    I suggest that you access the system recovery options using a Windows Vista installation disc and do a startup repair and if this fails, you can do a restore of the system from the Windows recovery environment.

    You can see the previous post of Srinivas R to verify the information on the system restore.

    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Vista 64 Windows - stuck in the windows error recovery loop. don't go to safe mode, does not recognize the recovery disc.

    Gateway dx 4200-ub001a

    quadruple-heart, 6 GB of ram. No hardware problem, that I can find.
    restarts just constant return to the windows error recovery screen.
    get a blue screen saying change the bios if it continues to happen, but nothing specific. Impossible to get
    BIOS screens in any case. nothing takes me out of the loop, I can understand.

    See if you can load (using F10 or F12) a free Diagnostics, bootable from here: http://www.carrona.org/initdiag.html

    If this does not work, then try F2 to enter the BIOS.
    Together, the boot order so that the CD/DVD is first, then try to run the diagnostics bootable from here and free: http://www.carrona.org/initdiag.htmlf

    If this does not work, then you need to try another CD/DVD drive (or take it to a shop for an estimate).

    Good luck!

Maybe you are looking for

  • Backflip: Where should I set notification tones?

    I have a few tones I want to use as ringtones for text, but they don't seem to appear when I consult the list of ringtones available notification. I have them currently under "SDCard > ringtones" with my real tones. They are all of 64 kbit/s, 10 seco

  • turn of office from portrait to landscape

    I've tried to control, alt, delete and somehow transformed my entrire screen to portrait.  How can I get that back to the landscape?

  • I can't download the rar files on about 500 MB with my new PC.

    I just bought a new 1 to PC with windows 7. I download a lot of games with Winrar 32/64-bit, but I can't get this new machine to download rar files larger than about 500 MB. Nothing more that it stops and says just the file is damaged or I'm missing

  • laptop is running very slowly.

    Original title: HELP PEOPLE My laptop is running very slow, but it was perfect a few months ago and it is not because of the virus, I don't know what to fix or what to change. Help, please.

  • NAT with access-list

    Now,. I want nat by looking at the destination address. example if destination is A nat for x pool network, and if the destination is something different then nat to the pool of y. IOS supports natting with ACLs and road maps. but as stated in the or