Error recovery disc on the Satellite A200 - not enough of space

After reformatting my laptop toshiba recovery disks will not reload windows because it says that I don't have enough space on my hard drive.

The error message is the following:
There is not enough space on S3A6134D502. You need extra 2.34 GB to copy these files.
S3A6134D502
Free space: 1.42 GB
Total size: 1.46 GB

It seems that he has created a new partition which allows to load windows on the partition being too small.

Problem is that you have modified the standard settings for the recovery procedure.
First partition on the disk HARD is called WinRE partition and this partition has a capacity of 1.5 GB.
When you start the recovery procedure and simply click OK or NEXT all went well.

I guess you have chosen configuration option and click on the second option to install the operating system on an existing partition.

What you probably want to do is to install the OS on the C partition only in the second hope or all other partitions will not be deleted or formatted. Right?
I tested several times on P200 and A200.

It won't work then only option is to erase the whole HARD drive and before recovery installation starts all existing data and partitions will be deleted and formatted.
So before you begin installation OS Backup all important data and install OS without changing anything.

Tags: Toshiba

Similar Questions

  • Question on the extension of the hard disc on the Satellite A200-1XO slot

    I want to know if * Satellite A200-1XO * has an extension of the hard drive slot?

    My A200-09V have a slot, but I do not have the connector. If I check in the manual, the location is available but not in all models... :(

  • Whenever I try to install my free download of Photoshop CC (2014) I get the following notification: "not enough disk space. Please free up space on D and try again (-30)

    See above. Can anyone help?

    Looks like you don't have enough memory.  See min-requirements below.

    System requirements | Photoshop

    Nancy O.

  • In time real PXI-1031 does more work with labview. "Not enough disk space to perform the backup.

    The labview real-time project was working until a few weeks ago and the only error that is displayed on the PXI is this error message.

    "NEITHER Configuration Manager: not enough disk space for the backup" everything before that looks like it starts very well. Recently, I removed the hard drive and remove the 4 GB network log file because it seemed to me that a file of 4 GB on a fat32 file system was probably the cause of the problem. After that it the project worked when I tested it, but others in my lab said it was broken again the next day.

    Any help would be greatly appreciated because I don't know all that equipment.

    I found that I had "reset IP" set to "yes" in the bios that seemed to be causing my problem because I changed it to no and it seems to work perfectly now. Sorry that it took so much time to understand and I feel like a fool.

  • Cannot complete the Windows backup "there is not enough disk space.

    Original title: backup error

    If you use windows 7 home premium backup & restore to backup errors program and says that there is not enough disk space when there are 1.2 to and the space required is 60 GB. Any suggestions?

    Check very carefully that the insufficient space, the error message can be generated by the disk you want to save not necessarily the destination drive.

    Backup Windows uses the VSS service who need free space on the drive to work. The cause is a lack of space on the system reserved partition and is generated by the VSS recorder.

  • Not enough disk space to complete this installation. Error code: U44M1P31

    Windows 7 laptop. Drive C (main road), drive E (Tools), G Drive (external drive). Suite Adobe CS5 for web design. Updates for adobe want to go in the tools folder in drive E. Error Message for all of the updates is not enough disk space. Of course, there is not enough disk space because it is a small partition of drive C drive. I don't know why or how the default for adobe updates is to drive E. I don't know where the properties are to change that. Adobe says it's a matter of windows. I can't find a place that asks me where I want to save the updates in all adobe programs. I have my adobe programs on the G drive which is an external hard drive. I would like for the updates go to the G drive whose program is. Can someone help me understand why adobe wants to download updates of files in a folder he knows that he can not download on due to lack of space? Can someone help me solve this issue? Please and thank you!
    This is the error code I get "not enough disk space to complete this installation. "Error code: U44M1P31.

    I suspect that Win7 libraries (Documents) are quite large. Libraries of redirection to your external drive, the will of placeholder still apear under users but the actual data will be on your outside.

    Then uninstall your outside Adobe and reinstall to C

    Updates for programs or those windows update are installed in the folder temp of victory, there the update, then runs and installs in the records required of this program. Unless you fiddled with the settings of your victory and redirected the temp folder.

    I think your problem lies in the installation of Adobe on an external drive and the program Adobe (or at least its update module) is confused by the present.

    Using an external drive, especially the usb drive, to a use for which it was not designed is a main issue.

    Maybe ask Adobe support if they supported the installation of their program on an external, probably the usb drive

  • To the Satellite A200-23d HARD drive recovery

    Here is someone who knows if the Satellite A200-23d has a HARD drive recovery integrated?

    I can't say for sure, but I'm sure it comes with a 99% HARD drive recovery image.
    Can you please tell us what your problem with this model of laptop?
    How can we help?

  • FN key display icon does not appear on the Satellite A200 (PSAE6E)

    Hello

    I have the Satellite A200, I reinstall Windows but now if I press Fn icons doesn't appear on the desktop, FN keys work correctly.

    I just want to see the icon that well I try to install each Toshiba utility, none worked.

    Hello!

    You use Windows XP or Vista?

    For Vista, you must install the package of value added.
    For XP, you must install the Hotkey utility.

    The two you can find on the Toshiba site: http://eu.computers.toshiba-europe.com-online downloads Support & -Online Download drivers

    If you have any other questions, please let us know.

    Good bye

  • Installing the program on HDD internal 2 on the Satellite A200 - 28 p

    Hello world

    Can someone help me? My pc has 3 discs apparently (this is a Satellite A200 - 28 p) and when I do a disk defragment it says that there are 3 a windows and c and d. Now, my query is can I install programs on the d drive I have recovery discs so guess that means that this drive is empty, as says that there 91.5 GB free of 91.6 Go.

    Does that mean so I can install programs on there, as have a print program of photo that is large enough and would be helpful if could install and a few other programs that use everyday, but like here when needed, on this other drive leaving my C drive for my Sims 2 games stuff and the stuff of Vista by default so that was a great help here before asking if everyone help me out my technical skills are basically could :-(zéro

    But I'm willing to learn, and as it says this laptop comes with a think that means 120 GB HDD can use either but I wanted to check before tried anything that either don't want to take the risk of ruin if it's a recovery drive and not a single one of my personal programs.

    Thank you so much to anyone who can help me with this question that wish had more technical knowledge.

    Debbie (Simreaper)

    Hi Debbie,.

    I don't know what you mean to have three readers, it is indeed very strange for display in the Defragmenter, so for now will be only concerns on your C and D drives only (which should be fine). you said you have the recovery disc for the computer, in which case do not any space on the drives reserved for recovery (as in the case of some laptops Toshiba-no).

    I would recommend only for purposes of recovery, to make a backup of all important data and settings on a separate DVD a regular and make sure that you have a factory DVD Toshiba-state recovery (i.e. one that is in the box when you bought the computer), or one that Toshiba has prompted you to do it yourself. You can also use software such as Acronis to create an easy to maintain the recovery point. I recommend you stick with a recovery DVD and a backup of all your work and folders however to get a clean install/recovery.

    In terms of where to install your photo program/sims2 game, it is to you. As C is the primary drive the primary partition has the best performance on drives C and D. This is why I recommend to leave all your files of program out there and let the D drive for files/applications/games that you do not use as much. You could integrate the storage space of drives C and D in C only, but it's a little too complicated to explain here.

    I hope this helps.

  • Application of recovery disc creator don't run / not working

    I was hoping someone could help me I want to create the DVD for my system recovery disks, but the application does not work. I installed IS the path '"C:\Program Toshiba Toshiba Recovery Disc Creator\ToRDC.exe' ' does not exist. I run it and nothing happens!

    Anyone know if I can download it or re-install... I can't find out how?

    I have no error or anything, it does not work! Laptop is Toshiba Satellite.

    Thank you!
    Steve

    Hello

    Satellite you need exactly?
    Folder HDDRecovery is available on the second partition?

    This tool cannot be downloaded. Now, all you can do is to install the OS by using recovery recorded on the second partition image. I hope that it will work.

    When you start your laptop, tap F8 and choose repair my computer option. Follow the menu on the screen. After the new installation of the operating system, you will be able to use it again.

  • After retrieving the Satellite A200 doesn't recognized partitions

    Recently my A200 Satellite crashed, but since you are using the Windows recovery disc is no longer recognizing the partition that came pre-installed, and I can is more to move, copy, or delete files.

    Someone at - it ideas?

    Thank you.

    Recovery image defines how the partitions will be created before the installation of recovery begins so you can install the OS using the 1000 times recovery disc and the result will always be the same.

    After using the recovery installation, you can change the partitions, but after installing recovery image, you will have the same situation as before.
    If I m remembering well after the installation of recovery, you will see two partitions on the HDD (C and D). Optical disc drive must be E. On the second partition D it will be copied recovery image and saved in folder HDDRecovery.

    Don t worry, everything is OK.

  • BT on the Satellite A200-130 pilot facilities

    Hello

    I bought a new Satellite A200-130, two weeks ago and when I run the Bluetooth from the BEGINNING or F8 + function, it opens the Bluetooth driver configuration, THEN COMES THE PROBLEM: it gets stuck. I opened the Task Manager to see if it has been using any CPU.
    It was actually using 1 or 2 sometimes 3 CPU. One day I left the configuration of work from 12: 00 to 12:00 and nothing happened.

    If a expert TOSHIBA? ¦. What is the solution?
    Keep in mind that I made the recovery for him but STILL< the="" same="">

    Can anyone help?
    I will appreciate it! Thank you.

    I checked your previous assignments and it's very bad that you didn't have success with BT on your A200 Satellite installation. I have the Satellite A200-1CR with BT, and in my case everything was OK. Different components have been installed and where BT finished was ready for use.

    I know you hate me for this, but I recommend you to follow:
    1 install the OS via recovery DVD new
    2. unplug all external and Vista boot devices
    3. turn the WLAN switch on WE
    4. when the WLAN led is used in combination of keys FN + F8 and switch to BT only.
    Please, don't use option ALL

    After doing this BT components must be installed. It takes about 10 minutes, but in my case it worked fine. Please if you have time do it again. I really can't imagine that this will not work. Install BT after clean operating system installation.

    I hope that you have success next time. :)

  • HP Pavillion DV-7? Nr can a recovery disc in the Blu - Ray drive and reinstall original settings?

    After my sister died, I found his nearly new laptop (HP Pavilion DV7? nr), but have not been able to use it, because of password and a biometric scanner. It sounds like a nice laptop, but worthless if I can't use it. Any Suggestions for one-it-myselfer (cheap)?
    A recovery disk can be inserted into the Blu - Ray player and re - install the original settings?
    There were not any software who carried on this laptop, so I don't know if she had, originally, and if it would work as does my drive recovery for my old HP Pavilion laptop using Vista.

    After my sister died, I found his nearly new laptop (HP Pavilion DV7? nr), but have not been able to use it, because of password and a biometric scanner. It sounds like a nice laptop, but worthless if I can't use it. Any Suggestions for one-it-myselfer (cheap)?
    A recovery disk can be inserted into the Blu - Ray player and re - install the original settings?
    There were not any software who carried on this laptop, so I don't know if she had, originally, and if it would work as does my drive recovery for my old HP Pavilion laptop using Vista.

    Contact HP and see what combination of keys at startup it probably gets to the factory defects.

    Maybe this:
    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&cc=us&DLC=en&product=18703

    Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessible

    If the computer does not start in Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.
    1. Press on the button / stop to start the computer and press f11 when the standard BIOS guests appear on the black screen.
      NOTE: by pressing the f11 key during startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed.

      • If the HP Recovery Manager can access the recovery on the hard drive partition, you receive a to back up user files before you start the recovery prompt. Follow the instructions.
      • If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.
      • If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.

    2. When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.
    Solve a common problem of recovery.
    If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.

    Or try to order a new recovery discs...

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07143&LC=en&cc=us&DLC=en&product=18703#N76

    Maybe this article:
    http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320

    HP has a simple recovery process, and its policy to provide filtering alternatives is well integrated in its support pages.

    I went through the process of replacing for a two-year-old HP Pavilion Elite m9600t. This system was built in the summer 2009, before Windows 7 shipped. As a result, my only option was to support Windows Vista 64-bit. For first class mail, HP shipping or taxes added up to $15.80. (I might have updated 2-day or night FedEx delivery for another $6 or $12, respectively.)

    From this page: HP and Compaq Desktop PC: looking for recovery discs?

    There step by step instructions to create a recovery disc for Windows 7, Windows Vista and Windows XP. Also, it offers the possibility to order replacement disks, but warns that these discs may only be available for a limited time:

    If you are unable to create a set of recovery discs, you may be able to order a set of replacement of HP HP discs. maintains an inventory of recovery disks of replacement several years after the product was released. However, due to licensing restrictions, HP is able to provide these recovery disc for a limited time. If the computer is several years after its warranty period, HP isn't maybe able to provide replacement for your computer disks.

    I tried with a model of 2008 HP (long out of warranty) and was able to locate filtering alternatives.

    The process of media control was a little confused. The key is to start with the appropriate model number, then click on software and driver downloads, as shown here:

    On the next page, you are prompted to select an operating system. The support link to recovery in the results list is available only if you select the version of Windows that your computer initially comes with. If you do not see a section "Recovery media", HP suggest "to ensure that you are on the right model number page and select another operating system." It worked for me.

    Interestingly, the last section on the page is titled "finding of the recovery disks from other Web sites. It contains a warning at the top in bold: try all other options in the paper support before attempting to order recovery disks at outside HP.

    If HP is further providing the recovery disc for your computer model and is no longer possible to create a recovery disk, you may be able to find a solution outside of HP.

    Popular online auction sites and providers of computer parts may have a part in stock original recovery disk. However, be cautious and aware of the risks when buying from a source outside of HP recovery disks. Beware of sites that offer recovery solutions when they are not affiliated with HP.

    Even if HP could not have a recovery disc available for purchase of value, search the part HP command Web site to find recovery kit part number that corresponds to your computer. Once you find the part number of the recovery disc, use the number in your search for best results.

    It's actually good advice. If you can find a part number, you may be able to find records of replacement from a legitimate outside vendor that specializes in parts for the models of the manufacturer of your PC.

  • My opinion on the Satellite A200 - 1 GB

    Hi all

    I got a Satellite A200 - 1 GB of Dubai on November 16, 2007
    It's really cool!
    It was so trendy more than I thought. Likewise, it doesn t have a fancy look, I think that it s a decent design.

    It doesn t have the harman/cardon speakers, but there is a sticker saying DOLBY SOUND ROOM. I put t know the meaning of it. But the sound quality is pretty much more than I expected.

    Win Vista it takes some time to start the PC, but performance is good. But I need to check the performance of my development work. Still, I couldn't t install the Visual Studio 2005, SQL server, kit JDK and Tomcat server.

    I think that those who will be work out on it with a prob. So I'll give my comment on A200 - 1 GB performance after working with those.

    Bluetooth, Webcam, DVD player all work correctly.

    {color: #ff00ff} Mode Dual pad is an asset for this tour. {color}
    {color: #0000ff} So far none of the drawbacks found on my laptop. {color}

    {color: #ff0000} Within 2 days only headaches I find is battery life. The battery is discharged with in almost two hours.
    It is a common thing? {color}

    Thank you for your summer little on the Satellite A200

    > With in 2 days only headaches I find is battery life. The battery is discharged with in almost two hours. It is a common thing?

    Yes, it's time to work common battery! But note; battery working time is different and always depends on the use of the laptop!
    If the laptop runs with maximum performance and unique pieces as ODD, GPU, CPU are stressed so battery working time sinks quickly.

    Please note that the Vista operating system consumes all the resources of the laptop and also the battery power down much faster than on the first MS OS like XP.

  • Screen cracked the Satellite A200

    I bought the Satellite A200-1YO 15.4 "laptop around a month ago.
    Today, I think the screen is cracked. I have not had an additional guarantee, but I still have the original invoice.

    What is my best course of action? My screen is covered by the warranty, although it is accidental damage? Or I have to buy a new monitor?
    I've seen this exact monitor on eBay for £127.00.

    Any help would be massively grateful.

    Hello

    I put t I think your warranty would cover the show physically damages, I mean it s not an electrical problem.
    To my knowledge the physical damage not covered by warranty

    However, for more details, you must contact the ASP in your country.
    Explain your problem and how did the net

    Good luck

Maybe you are looking for

  • Audio no longer works

    I have Windows 8 running on a Dell computer.Audio stopped working in email (Thunderbird). The image is fine--is no sound.

  • Qosmio F30-112: CONTROLLER of BUS SM with yellow exclamation point

    Hello Recently I reformat my win pc XP MC using the recovery CD, but I saw on the Device Manager CONTROLLER of BUS SM is to have yellow question mark.How could I solve this problem? Some time my pc froze (work stoppage) so I have to restart my pc.Is

  • HP Deskjet 3050 (J610) - can not find the claim code

    I have a HP Deskjet 3050 J610 Series. I searched the support site of HP and may not know how to configure my ePrint printers. My ePrint printer turned on? There is no instructions that correspond to my machine on this site: http://support.HP.com/us-e

  • How to close a visual basic application?

    I try to open a Setup program, but it does not open and gives the following message: "one or more Visual Basic applications are running.  If please close and then click OK. "Closing the program doesn't seem to work.  In the past, I've been able to mo

  • Vista - can not stable KB2416447

    Have tried several times to download the following security update. I tried so many things, that I don't even remember all the different programs I downloaded, removed, downloaded & deleted. Any info would be greatly appreciated.  Here is the code I