Error recovery Windows on Equium A210

Similar Questions

• When I turn on my blue screen laptop appear after windows error recovery windows also appear

  When I turn on my laptop, a blue screen appears after windows error recovery windows appear also... ask in safe mode are normal windows startup?... what I can do... is a problem on my system?... Please help me...

  Hello

  ·         What operating system is installed on the computer?

  ·         What are the error messages that are displayed on the blue screen?

  ·         Did you make any changes before the show?

  In the recovery menu, select Safe mode and check if you can connect?

  You can also try to restore the system in safe mode.

  If you are able to boot to the desktop in safe mode, then I suggest you put the computer to boot in safe mode and check if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Reference: resolution in Windows 7 stop errors (blue screen)

• error recovery Windows returns constantly to the start without reason...

  Hi I recently got windows 7 Professional 64-bit my Thursday school last burn on a dvd. Everything seemed fine after installation, and such as Saturday when he starts in front of the screen of bio and then pop up with error recovery windows telling me that windows wasn't one to repair or start normally anyway would it continue to go to this windows error recovery screen bit whatever I chose. These events eventually led me to believe that my hard drive has failed in which I had a brand new only on Sunday and installed fine all appeared while Monday morning he started to blow upward with the same error message I could try the repairs say it was very good, try and boot and it would restart again. Fortunately I was able to install my Vista Edition home premium 64-bit, which seemed to be ok for most of the day until yesterday when it grew up the windows on error with the options to use the last configuration or start normally (due to the recent hardware or software changes, but I have not install anything new in terms of software or hardware) that works , but im not sure for how long. Im very tech savvy for my age and know what im doing with computers, but I can't seem to understand what is happening since it is a new player none of my hardware is a failure and I don't know.
  Appreciate any help...
  Colin

  Repair system solves most of the start-up problems.  Some computers have startup repair pre-installed otherwise you will need a CD/DVD of Windows Vista.   If your system still does not boot in Windows, follow these steps to repair the boot sector.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Question the button of Windows Hotstart - Equium A210

  Can someone enlighten me on the 6 multimedia keys above the keyboard of my laptop Equium A210? I already had from another portable non-Toshiba which had a similar set up. In an engine off the coast of the State, if I pressed the multimedia button, windows media Center started without having to start the full operating system.

  With my satellite notebook, if I press the multimedia keys, media center application or the application of internet explorer opens but only after a full system startup. Is there anyway that my satellite can be changed so that when I press the media button - only the media Center starts and not whatever!

  Thank you

  Hello

  > With my satellite notebook, if I press the multimedia keys, the library of application or the application of internet explorer opens but only after a full system startup. Is there anyway that my satellite can be changed so that when I press the media button - only the media Center starts and not whatever!

  This is right. The controls buttons Toshiba Launches the Windows media player or other applications like IE once Windows has finished loading.

  Like some other Toshiba Qosmio series laptops or another series is delivered and equipped with the Qosmio player or Express Media Player.
  These players can be looked at separately, without having to start Notepad in Windows operating system.

  But your Equium doesn t takes care of the players.

  Best regards

• Error recovery Windows after Vista MS updates - Acer

  I have an Acer Aspire T180 - two years, has been my daughters.  We have provided factory to use ourselves and have been running for about a week.  Automatic updates recommended upgrade Vista to Service Pack (I don't remember if 1 or 2 and now impossible to verify).  All seemed well, we used the computer after the upgrade with no problems.  However, after the stop for the night and put on the next morning (yesterday), we now have a blue screen with an error of Windows recovery.  Auto repair does not work and start normally does not work, and those are the only 2 options.  I don't have the disk to reinstall what... should I just reset factory again and then make sure I have create a recovery/backup disk once we are up?

  Hello

  If you just put it to standatrds of the factory before this happened that the easiest would be to do it once again, as you suggest

  and make the disks of backup system in the event of a hard drive failure

  as soon as he is running again, you will see an Acer toolbar to the top of the screen

  one of these icons in must click on it to start to make the records of recovery to reinstall vista again, if necessary

  If you wish you can make this start repair disk and try to fix it:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and for later use, here's how backup data in vista

  These methods depending on your version of vista

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

• Computer does not start, the Error Recovery window is continuous

  Yesterday, I upgraded to a software called Turbo Lister for eBay.  The computer must restart for the changes to take effect.  It's the start of my problem.  After the reboot, I got Windows Error Recovery screen.  He recommends launch Startup Recovery or start Windows normally.  I tried both and keeps it just goes back to the screen even as a loop.  I tried to boot in safe mode does not work.  I have inserted the reinstallation cd and run Startup Repair and that has not worked.  Help, please!  Is that what I can do about it or he needs to see a professional?

  Hello

  You can try these since the Windows CD/DVD

  1. the system back restore to before that has happened

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  2 SFC and CheckDisk from the Windows disk command prompt

  SFC/scannow

  RE-RUN the disk

  Chkdsk /f /r

  RE-RUN the disk

  then try Startup Repair.

  (there is space after C and before / k and this before / f and before /)

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Error recovery Windows (software/hardware change) - No restore points and no disc how to fix?

  Still not too sure what happened or how it happened by the way, but when I turned on my PC today, I had the menu to choose start normally or repair starter system, when I try to start normally, the computer just as it happened to the Windows 7 loading screen. After that there a few times, I tried a system repair... He once checked for any problems and said then that he was trying to fix, but after waiting a few minutes, an error box appeared, saying "Startup Repair cannot repair this computer automatically" following with send/don't send. After closing the box, I have the option to go to advanced options, which includes the system restore and System Image recovery, but since I have no restore points or Image to recover with, there is not much that I seem to be able to do. I have no idea what to do with it, without the drive I can not install a new version and wouldn't really, because there is a lot of work on there that i prefer to keep, any alternative?

  The Informatics iron law says that important or irreplaceable files must be stored at least two independent media. A lot of people ignore this rule. Some change their backup philosophy until they suffer a great success, others wait until after a disaster. A 2.5 drive "in a box external USB is an inexpensive but very effective backup media. In your case you can probably recover your data by starting on a command Console and copy your files on such a disk, using commands in the console.

  On your inability to start Windows: you have exhausted almost all options, but there is a small chance that you could restore the windows to restore a previous version of your registry files. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. Note that it may reset your password to a previous value.
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3 log in as administrator if you are prompted.
  4. Select repair when prompted.
  5. Select the command line.
  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\RegBack\
  CD RegBack
  dir
  8. review the dates of the software, system, and SAM files. The files created before or after that is your problem?
  9. If they were made before the problem appeared, you can then type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\Regback to Q:\Windows\System32\config.
  _________________________

  If this answer solves your problem, please click "Propose as answer" so that the thread can be closed. Thank you.

• Unable to boot Windows Vista past the Windows Error Recovery

  original title: girl in trouble

  Hello, my daughter has a DELL studio with Vista Home Premium 32 bit SP1, the problem is that it will not pass the Windows error recovery 'window' repair statup display a message "Startup Repair cannot repair this computer automatically" and gives them the following problem details:
  Signature of the problem
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18111.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:2228258 problem
  Signature of the problem 05: NoRootCause
  Signature of the 06 problem: CorruptVolume
  Signature of the problem 07:0
  Signature of issue 08: 1
  Signature of the problem 09: Chkdsk
  Signature of the problem 10:0
  OS version: 6.0.6001.2.1.0.256.1
  Locale ID: 1033

  She has all his docs school and work on it and I'm trying to save them, here, that's all I tried to do:

  I tried to boot using the DVD included with the computer, reinstall after pressing f12 to boot from the cd/dvd, it gave me the ability to "Repair computer" but is not. In fact I are entered in the comand prompt and ran a chkdsk/f with no result. I tried all the other recovery, repair choice but given the result.

  If I press f8 and select Safe mode, it don't go there but will take me to the same window "Windows Error Recovery".

  The 'install' mode has the 'upgrade' off function and it is said that it works only with windows.
  I can't do a clean reinstall without losing my daughter work... any suggestions?

  Luis

  Luis

  Hello

  Either yourself or a store should remove the HDD and it slave in a system that works to see if the data can be recovered from him. The error message indicates a corrupt installation volume rarely, this can be fixed without deletion and recreation of the volume (and doing so will lose all data currently on the disk). Once the data was retrieved from the Vista installation will have to be redone from scratch.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Equium A210 - Diskpart error during recovery

  Hello

  I am recovering an Equium A210 to factory condition. I run the recovery utility and select the default settings. I get an error in diskpart and the recovery process stops. This I what it shows:
  "
  Try to remove all possible partitions on the HARD disk letters 0...
  Try to remove all the possible partitions on 1 HARD drive letters...

  Microsoft DiskPart version 6.0.6000
  Copyright (C) 1999-2007 Microsoft Corporation.
  On computer: MINWINPC

  Disk 0 is Noah the selected disk.

  DiskPart succeeded in cleaning the disk.

  DiskPart has encountered an unexpected error.
  Check the event log system for more information about the failure.
  ERROR: DiskPart failed!
  Press a key to continue...
  "
  How can I check the system event log when I have no way to look like the HARD drive has no operating system present.

  Any help and advice would be great.

  I don't really know what the problem is there but, if possible, get Microsoft Vista DVD facilities to see if you can install Vista correctly.
  If yes then there is something wrong with the recovery image files. If this isn't the case, I assume that there is something wrong with the HARD drive.

  Sorry, but that's all I can say at the moment.

• Equium P300-16 t - Windows error recovery screen

  It started with not to connect to the internet and to say that something did not launch. I looked on the forum and he said press F8 chose the first option (to fix your computer), I did.

  Then he took me to a with option 2 windows error recovery
  -Launch Startup Repair (when press screen becomes black for 1 second, then goes back to the same screen)
  -Start windown normally (when press turns the computer on and back on bringing me back to the same screen)

  Now when I turn it on charges it takes me to the windows error recovery screen. And no matter what I push on I always end there.

  Hope someone can be useful

  Hello

  Looks like something was wrong with the recovery process and now Windows may start t. Maybe something messed with the registry or a few important Windows files, so I think that the only option to get rid of it using the Toshiba recovery disc. It will wipe the entire HARD disk and restore the factory settings, normally it should work.

  Just so enter the Toshiba Recovery disk and follow the instructions on the screen. Windows will be reinstalled, and you get back to factory settings. :)

• Equium A210 starts with error - PXE - E61 Media test failure

  Trying to help a friend that we think that the laptop has been damaged by the virus Exploit.Drop.G... All I could think and decided as a last resort to execute tried suggested wipe drive. This succeeded and I thought I'd be able to reinstall Vista from the disc, but I get the above error message. The laptop is a Toshiba Equium A210-1VO (model PSAF5E-001005KS number).

  I noticed once before when using this laptop CD/DVD could not play DVD I tried all tips disassembling upper and lower filters etc, but could not solve this problem (which was pre virus). When I boot on utilities system that she admit HDD like Hitachi-(S1), optical disc drive: TSSTcorpCD/DVGW TS-L632D, and says total memory 2048 MB system BIOS version 1.60.

  Totally stuck now, any advice/help would be much appreciated.

  I think for some reason any HDD is not recognized as a boot device.
  Start your laptop and press F12 repeatedly to enter the boot options.
  He put original recovery disk or the ODD Microsoft installation disk when startup options are displayed on the screen.
  Choose the CD/DVD as a boot device and press ENTER.

  What happens when you do this?

  A few days ago, I had a similar question about friends A300. HARD drive was defective. After Exchange of HARD drive, I was able to install Win.

• Equium A210 - Windows Explorer stops working

  I have a laptop Equium A210. Why does windows Explorer stop working and restart all the time?

  > Why windows Explorer does not work and restart all the time
  Who knows?  :|

  Maybe you have messed your OS and now OS doesn't function properly.
  Have you tried to restore the operating system from the recovery CD?

  If this isn't the case, then do it. The whole HARD drive will be formatted and the recovery CD to install the image of Toshiba which contains the OS, driver, utility and software tools extra.

  This should help.

• Equium A210-1AS: Windows unexpectedI/Oerror bootmanager status took place

  Hi everyone, I really hope there, can someone help me today!
  My daughter is in the middle of her GCSE exams and has a problem with its Equium A210 - 1AS.

  It was working fine until last night and now all she gets while booting is:

  "Boot Windows display manager".
  Windows has encountered a problem communicating with a device connected to your computer.

  Thiserror can be caused by unplugging a removable storage device, such as an external USB drive while the appliance is in use, or by faulty hardware such as a hard drive or CD ROM drive which is a failure.
  Make sure that all removable storage is properly connected, and then restart your computer.

  If you continue to receive this error message, contact the manufacturer of the equipment.

  File: \Boot\BCD
  Info: An unexpected i/o error has occurred.
  ENTER = continue»

  She said she had her sex cam plugged and I tried to restart and reconnected, but this has not solved the problem.

  There, can someone help me please because we are desperate to work on his pc!

  Thanks a lot if you can.

  Kind regards
  A

  Hello

  > She says she had her sex cam plugged and I tried to restart and reconnected, but this did not solve the problem

  Is this means that the laptop can not boot Windows OS?
  Please disconnect any external devices. Then switch on and press F8.
  Now you should see the advanced boot menu.
  Please check if you start the machine in safe mode.

  Otherwise I recommend the BIOS.
  Ensure that the HARD drive has been recognized by the BIOS.
  If there is just no drive listed then the HARD drive could malfunctions.
  If the HARD drive is there, so you must set it as first boot device.

  If anything would help him, then a system restore would be desirable.

• Equium A210 - error - operating system not found

  Hi guys

  I'm new on this Yes, you can be sweet. I have an Equium A210, 2 years old.
  Everything was fine until today when it goes off.

  I thought that it might overheat because he felt hot so cool.
  When I turned it back I get the error "Operating system"... not found This is accompanied by a constant clicking noise coming from under the laptop!

  Any ideas anyone?

  Thank you very much

  This error is known to me.
  I had too!

  It appeared after the death of my HARD drive.

  I think the BIOS does not recognize the HARD drive and therefore the operating system is not found.

  To me, it seems that you need to replace the HARD drive and then you could install the OS on the Toshiba recovery disc.

  Good bye

• Windows error recovery, "load failed with error 1009 (STHIVE #0).

  Hello world

  This problem occurred to me yesterday. When I started windows, there is here a dialog box saying "Windows Error Recovery" and below, is

  "Unable to start Windows. A recent hardware or software change might be the cause. "(I don't remember changing anything)

  "If windows files have been damaged or misconfigured, startup can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. »

  There are two options it saying

  -Launch Startup Repair tool

  -Start Windows normally

  When I clicked on start Windows normally, seems that Microsoft Corporation loading bar never ends

  When I clicked launch a startup repair... A box named "Startup Repair" appeared, saying "Startup Repair is checking your system for problems..." "But after that, it seems that nothing had changed. When I opened my laptop once again, he went to the dialog box saying "Windows Error Recovery" again.

  What should I do now?

  My laptop is "Compaq Presario V3500"

  Also, I see that this tread on Compaq.com http://support.hp.com/us-en/document/c01612373 is it safe to do? I ' ts ok for me to lose all my files just to repair this laptop...