Error related to linear the predictive coding (LPC) for speech recognization in Labview

Hello

I m doing a program in labview for speech recognization in labview.   I'm doing a file .wav 'before' word and convert it to data waveform and use linear predictive coding (LPC) Subvi which available in the site OR the voiceanalysis program to generate graphic formants. I get two error but I m get not the average of this error... If anyone can tell me how to solve this error and what the error means. ?

Please someone help me... I m all confused.

I am attaching two file related to the error...

We would need to see the code for help, these error message snapshots are not particularly useful - they seem to indicate that your waveform is empty?

Tags: NI Software

Similar Questions

  • Status: Unexpected error has occurred. The timeout of waiting for an answer UVSC error internal

    Work with labview ARM and it was working fine this morning.  I went to run a program and the build failed with the following message.

    [13: 34:50] status: error
    An unexpected error has occurred.

    [Source: the timeout of waiting for an answer]

    Internal error UVSC

    Detail: [UVSC_PRJ_LOAD, MSG: 0x1000, STATUS:]
    [0x1] code: 1]

    Did normal things as restart the computer.  Plug and unplug the Board of Directors of the computer.

    I tried to reinstall the whole arm labview and it does not work.

    Even from labview so you go to tools > ARM > show keil does not work either.  I can open keil in itself, but it doesn't seem to be communicating with labview.

    Figured it out.  Somehow the projects I was working on has been corrupted somehow.  After another reinstalled, I opened a sample project, not one of the many that are mine, and it worked.  I had copy and past the code on the project and in a new, but it works.  Don't know how my projects I screwed up in the middle of work on them.

    Now, back to actually do the work.

  • Error: Could not find the WSDL port defined for the Service

    Hello

    I am facing error below when calling the partner WSDL:

    Oracle.Fabric.Common.FabricInvocationException: Cannot find the WSDL port defined for the service.

    Can someone guide me what could be the exact problem?

    * I can't ping this host.

    Thank you

    Richa

    Puneet salvation,

    I am able to access from the WSDL browser and value of the location in composite.xml is correct.

    Kind regards.

  • Error code: U44M1I210 during the installation of update for Photoshop 2014.2

    Adobe Photoshop 2014.2

    There was an error of installation of this update. Quit and try again later. Error code: U44M1I210?

    Has anyone seen this with the last batch of updates!

    There is no manual download of the CC updates link. You can download the update from the application itself or creative cloud desktop application.

    Suggest you to uninstall PS CC 2014 and re - install and then check. http://helpx.Adobe.com/creative-cloud/help/install-apps.html#uninstall apps

    Let me know if same problem.

    ~ David

  • After effects error: could not find the main entry point for TitlerAfterEffectsHost.plugin

    Hello

    When start after effect CS6, I get this error message.

    Any ideas on how to solve this problem.

    Michael Smith

    As Mylenium says it's a mistake to third party plug-ins, the titration module NewBlueFX plug-ins. I would like to ask for help with their plug-in:

    http://NewBlueFX.com/support

  • Recovery of the class factory COM for component with CLSID {3CE74DE4-53D3-4D74-8B83-431B3828BA53} failed due to the following error: 80040154

    When I run pdf reader applications, I get this error:

    Recovery of the class factory COM for component with CLSID {3CE74DE4-53D3-4D74-8B83-431B3828BA53} failed due to the following error: 80040154

    Hello

    1. you remember to make changes to the computer before this problem?

    2 are you able to open files from other Adobe programs?

    Follow these methods.

    Method 1: The problem is that by default, when the PDF program is used as a COM object, then it cannot be activated by the following accounts:

    (a) a Director

    (b) system

    (c) interactive

    How to solve this problem is to change the DCOM settings for the Application'S object.

    Configure DCOM

    a. click Start, type run in the start search field.

    b. type DCOMCNFG , and then press OK. (This will load the "Component Services")

    c. navigate to Component Services, click computers, my computer, DCOM Config application PDF.

    d. right-click and select Properties.

    e. Select the Security tab.

    f. in "Launch and activate permissions" select personalise and press change.

    g. press the Add button to select the "Network Service" account

    f. click on the OK button, and then test your application, it should work fine now.

    Method 2: If this does not help, you can uninstall and reinstall Adobe reader software and check.
    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    You can download the latest version of Adobe reader from the following link.
    http://get.Adobe.com/reader/

  • LIBTUX_CAT:582: ERROR: unable to save, the full registry table

    When we tried to call one of our service 100 times at the same time we had an error like: -.

    181936.547.MLXWTAIXDEV! GWWS.3568042.1.0: LIBTUX_CAT:582: ERROR: unable to save, the full registry table
    182718.591.MLXWTAIXDEV! GWWS.10432990.1.0: LIBTUX_CAT:585: ERROR: registry disabled table slot index past, impossible to cancel registration


    Can someone help us on why this error is coming.

    The configuration of UBB for even is like: -.

    MAXACCESSERS 350
    MAXSERVERS 430
    MAXSERVICES 1200
    MAXGROUPS 100
    MAXNETGROUPS 20
    MAXMACHINES 256
    MAXWSCLIENTS = 100
    MAXACLCACHE = 10
    MAXPENDINGBYTES = 100000


    'TMMETADATA '.
    SRVGRP = "M_JOLT_GRP".
    CLOPT = '- A - / dev_app/dtux5/bin/reposfile f.
    RESTART = Y
    SRVID = 1
    GRACE = 3600
    MAXGEN = 5

    'GWWS '.
    SRVGRP = "M_JOLT_GRP".
    CLOPT = '- A - iGWWS1'
    RESTART = Y
    SRVID = 2

    Wsdf file

    < definition
    xmlns = "http://www.bea.com/Tuxedo/WSDF/2007."
    name = "EBATEST" wsdlNamespace = "urn: salt." EBATEST.wsdl">
    < WSBinding id = "CURTEST_Binding" >
    < SOAP >
    < AccessingPoints >
    < endpoint
    address = "http://10.16.114.145:7001 / ebaapp" id = "eba_HTTP_IN" >
    < / endpoint >
    < / AccessingPoints >
    < / SOAP >
    < Servicegroup id = "ebatestGrp" >
    < name of Service = "SCD_GET_TRD_UND" > < / Service >
    < / Servicegroup >
    < / WSBinding >
    < / definition >


    And salt file used for manufacturing saltconfig

    < deployment xmlns = "http://www.bea.com/Tuxedo/SALTDEPLOY/2007" >
    < WSDF >
    "< import location="/dev_app/dtux5/bin/example.wsdf "> < / Import >
    < / WSDF >
    < WSGateway >
    < GWInstance id = "GWWS1" >
    < inbound >
    < link ref = "EBATEST:CURTEST_Binding" >
    < use endpoint = "eba_HTTP_IN" > < / endpoint >
    < / binding >
    < / entrants >
    Properties of <>
    < property name = "enableSOAPValidation" value = "true" / >
    < / properties >
    < / GWInstance >
    < / WSGateway >
    System <>< / system >
    < / deployment >



    The generated trace file is like: -.


    184541.717.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184541.717.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184541.717.MLXWTAIXDEV! GWWS.2277636.1034.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184541.718.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184541.722.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281396]
    184541.723.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 1 x4f1968af: SESSION: TIMEOUT VALUE IS [9999]:
    184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: username: mamu2:
    184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: Sbaw id: 281396:
    184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: company id: B21001:
    184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: business msg: invalid user: ID entered is not valid
    184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: name of the Service: SVC_SESSION
    184541.727.MLXWTAIXDEV! svr_session.11043070.1.0: no data in the Session table for: mamu2:,: 281396:
    184541.728.MLXWTAIXDEV! GWWS.2277636.1.0: GWWS_CAT:21: WARNING: Tuxedo service returns TPFAIL.
    184541.729.MLXWTAIXDEV! GWWS.2277636.777.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184700.521.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184700.521.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184700.521.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184700.522.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184700.522.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184700.523.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 2: SESSION: TIMEOUT VALUE IS [9999]:
    184700.524.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 2: SESSION: SESSION [281397] IS VALID:
    184700.538.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184700.538.MLXWTAIXDEV! GWWS.2277636.1034.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.691.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.691.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.691.MLXWTAIXDEV! GWWS.2277636.1034.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.692.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.693.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 3: SESSION: TIMEOUT VALUE IS [9999]:
    184707.694.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 3: SESSION: SESSION [281397] IS VALID:
    184707.710.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.711.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.718.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.718.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.718.MLXWTAIXDEV! GWWS.2277636.1548.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.718.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.718.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.719.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 4: SESSION: TIMEOUT VALUE IS [9999]:
    184707.719.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 4: SESSION: SESSION [281397] IS VALID:
    184707.732.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.732.MLXWTAIXDEV! GWWS.2277636.1548.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.738.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.738.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.739.MLXWTAIXDEV! GWWS.2277636.1034.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.739.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.739.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.739.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 5: SESSION: TIMEOUT VALUE IS [9999]:
    184707.740.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 5: SESSION: SESSION [281397] IS VALID:
    184707.756.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.756.MLXWTAIXDEV! GWWS.2277636.1034.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.769.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.769.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.769.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.769.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.770.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.770.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 6 x4f1968af: SESSION: TIMEOUT VALUE IS [9999]:
    184707.771.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 6 x4f1968af: SESSION: SESSION [281397] IS VALID:
    184707.798.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.799.MLXWTAIXDEV! GWWS.2277636.777.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.807.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.807.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.807.MLXWTAIXDEV! GWWS.2277636.1548.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.807.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.807.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.808.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 7 x4f1968af: SESSION: TIMEOUT VALUE IS [9999]:
    184707.808.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 7 x4f1968af: SESSION: SESSION [281397] IS VALID:
    184707.821.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.821.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.831.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.831.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.831.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.831.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.831.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.832.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 8: SESSION: TIMEOUT VALUE IS [9999]:
    184707.832.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 8: SESSION: SESSION [281397] IS VALID:
    184707.843.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.843.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.855.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.855.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.855.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.855.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.856.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.856.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 9: SESSION: TIMEOUT VALUE IS [9999]:
    184707.857.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 9: SESSION: SESSION [281397] IS VALID:
    184707.869.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.869.MLXWTAIXDEV! GWWS.2277636.1548.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.876.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.876.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.876.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.876.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.876.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.877.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xa: SESSION: TIMEOUT VALUE IS [9999]:
    184707.877.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xa: SESSION: SESSION [281397] IS VALID:
    184707.899.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.899.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.906.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.906.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.906.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.907.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.907.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.907.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xb: SESSION: TIMEOUT VALUE IS [9999]:
    184707.908.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xb: SESSION: SESSION [281397] IS VALID:
    184707.918.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.919.MLXWTAIXDEV! GWWS.2277636.777.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.932.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.932.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.932.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.932.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.932.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.933.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xc: SESSION: TIMEOUT VALUE IS [9999]:
    184707.933.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xc: SESSION: SESSION [281397] IS VALID:
    184707.945.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.945.MLXWTAIXDEV! GWWS.2277636.1034.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.957.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.957.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.957.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.957.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.957.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.958.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xd: SESSION: TIMEOUT VALUE IS [9999]:
    184707.958.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xd: SESSION: SESSION [281397] IS VALID:
    184707.973.MLXWTAIXDEV! GWWS.2277636.1.0: LIBTUX_CAT:585: ERROR: registry disabled table slot index past, impossible to cancel registration
    184707.973.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.973.MLXWTAIXDEV! GWWS.2277636.1548.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.980.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.980.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.980.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.980.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.980.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]


    Kind regards
    Anurag

    Hello

    Tuxedo documentation, LIBTUX_CAT:582 is described as follows with a recommended action.

    >
    582

    ERROR: Unable to save, the full registry table

    Description

    The BEA TUXEDO system was trying to find a location in the registry table for a process, but the registry table was full.

    Action

    Increase the MAXACCESSERS parameter in the UBBCONFIG file, rebuild the TUXCONFIG file, and then restart the application and try again.

    >

    So try increassing MAXACCESSERS and see if the problem goes away.

    Kind regards
    Todd little
    Chief Architect of Oracle Tuxedo

  • Error relative to the SRS

    I am currently using Laview 2014 with the tool box audio and vibration.  I was trying to make an analysis of SRS where the entrance was a shock pulse demi-sinusoide measured in G, and the result should be the relative shift SRS.  I used the example NEITHER provided "Shock Response (simulated) Specturm".  When I use the absolute acceleration that the output, the results are correct. At a natural frequency of 81,27 Hz, the SRS is 165G or ~ 63 756 in / s ^ 2 when I use relative displacement as output with units of inches, the results appear to be in error.  At a natural frequency of 81,27 Hz, the relative movement of the results is 63 580 in.  Quickly note that the main transaction that took place is a unit conversion.  It is unreasable having a relative movement of this size for the alleged entry.  Does anyone know if the Toolbox makes an assumption about the type of entry?  Maybe must match the input and output.  For example, if you want a relative movement, then you must put a displcament waveform in.  Someone saw?

    I have attached a picture of my settings.

    Has investigated more and taken from the book there.  There is an error in the sound and vibration toolkit of NOR provided definatley.  I rewrote my own version and it works fine.  I have never here of R & D.

  • create / relational view received the error

    Hi expert,

    I'm in Oracle Enterprise Manager 11 g 11.2.0.1.0.
    SQL * more: Production of release 11.2.0.1.0 killed him Feb 22 11:40:23 2011

    I have an .xml file in a table of xmltype: DOCUMENT

    <? XML version = "1.0" encoding = "UTF-8"? > <? XML-stylesheet href = "http://www.accessdata.fda.gov/spl/stylesheet/spl.xsl" type = "text/xsl"? >
    "< document xmlns =" "urn: hl7 - org:v3" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "urn: hl7 - org:v3 http://localhost:8080/home/DEV/xsd/spl.xsd" & gt;
    < root id = "5ca4e3cb-7298-4948-8cc2-58e71ad32694" / >
    < code = '51725-0' codeSystem = "2.16.840.1.113883.6.1" displayName = "REGISTRATION OF ESTABLISHMENTS" / >
    < effectiveTime value = "20100730" / >

    ........................................................
    < / contactParty >
    < / assignedOrganization >
    < performance >
    < actDefinition >
    < code = "C43360" codeSystem = "2.16.840.1.113883.3.26.1.1" displayName = "manufacturing" / >
    < / actDefinition >
    < / performance >
    < / assignedEntity >
    < / assignedOrganization >
    < / assignedEntity >
    < / representedOrganization >
    < / assignedEntity >
    < / author >
    < item >
    < structuredBody / >
    < / component >
    < / document >

    I tried to create a relational view using the code below.
    I got following error:
    ERROR on line 1:
    ORA-19276: XPST0005 - XPath step specifies an invalid element/attribute name:
    (author ='urn: hl7 - org:v3')

    y does it can someone help me.
    Thank you!

    Published by: cow on March 18, 2011 14:14

    Hello

    You have the wrong Xpath by passing the XML fragment to the 2nd XMLTable.

    SELECT master.registrationID, master.code, detail.*
FROM DOCUMENT doc,
     XMLTable(
      XMLNamespaces(default 'urn:hl7-org:v3'),
      '/document'
      PASSING doc.OBJECT_VALUE
      COLUMNS
        registrationID VARCHAR2(50) PATH 'id/@root',
        code           VARCHAR2(10) PATH 'code/@code',
        orgID          NUMBER(10)   PATH 'author/assignedEntity/representedOrganization/assignedEntity/assignedOrganization/id/@extension',
        orgROOT        VARCHAR2(15) PATH 'author/assignedEntity/representedOrganization/assignedEntity/assignedOrganization/id/@root',
        orgNAME        VARCHAR2(50) PATH 'author/assignedEntity/representedOrganization/assignedEntity/assignedOrganization/name',
        orgADDRstreet  VARCHAR2(20) PATH 'author/assignedEntity/representedOrganization/assignedEntity/assignedOrganization/contactParty/addr/streetAddressLine',
        orgADDRcity    VARCHAR2(20) PATH 'author/assignedEntity/representedOrganization/assignedEntity/assignedOrganization/contactParty/addr/city',
        orgADDRstate   VARCHAR2(20) PATH 'author/assignedEntity/representedOrganization/assignedEntity/assignedOrganization/contactParty/addr/state',
        orgADDRzip     VARCHAR2(15) PATH 'author/assignedEntity/representedOrganization/assignedEntity/assignedOrganization/contactParty/addr/postalCode',
        orgADDRcountry VARCHAR2(20) PATH 'author/assignedEntity/representedOrganization/assignedEntity/assignedOrganization/contactParty/addr/country',
        orgPHONE       VARCHAR2(20) PATH 'author/assignedEntity/representedOrganization/assignedEntity/assignedOrganization/contactParty/telecom[1]/@value',
        orgEMAIL       VARCHAR2(40) PATH 'author/assignedEntity/representedOrganization/assignedEntity/assignedOrganization/contactParty/telecom[2]/@value',
        contactPerson  VARCHAR2(20) PATH 'author/assignedEntity/representedOrganization/assignedEntity/assignedOrganization/contactParty/contactPerson/name',
        assignedEntity XMLTYPE      PATH 'author/assignedEntity/representedOrganization/assignedEntity/assignedOrganization/assignedEntity'
     ) master
   , XMLTable(
      XMLNamespaces(default 'urn:hl7-org:v3'),
      '/assignedEntity'
      PASSING master.assignedEntity
      COLUMNS
        RSN_XML_POS     FOR ORDINALITY,
        orgID2          NUMBER(10)   PATH 'assignedOrganization/id[1]/@extension',
        orgROOT2        VARCHAR2(15) PATH 'assignedOrganization/id[1]/@root',
        orgID2_d        NUMBER(10)   PATH 'assignedOrganization/id[2]/@extension',
        orgROOT2_d      VARCHAR2(20) PATH 'assignedOrganization/id[2]/@root',
        orgNAME2        VARCHAR2(50) PATH 'assignedOrganization/name',
        orgADDRstreet2  VARCHAR2(20) PATH 'assignedOrganization/addr/streetAddressLine',
        orgADDRcity2    VARCHAR2(20) PATH 'assignedOrganization/addr/city',
        orgADDRstate2   VARCHAR2(20) PATH 'assignedOrganization/addr/state',
        orgADDRzip2     VARCHAR2(15) PATH 'assignedOrganization/addr/postalCode',
        orgADDRcountry2 VARCHAR2(20) PATH 'assignedOrganization/addr/country',
        orgADDRstreet3  VARCHAR2(20) PATH 'assignedOrganization/contactParty/addr/streetAddressLine',
        orgADDRcity3    VARCHAR2(20) PATH 'assignedOrganization/contactParty/addr/city',
        orgADDRstate3   VARCHAR2(20) PATH 'assignedOrganization/contactParty/addr/state',
        orgADDRzip3     VARCHAR2(15) PATH 'assignedOrganization/contactParty/addr/postalCode',
        orgADDRcountry3 VARCHAR2(20) PATH 'assignedOrganization/contactParty/addr/country',
        orgPHONE3       VARCHAR2(20) PATH 'assignedOrganization/contactParty/telecom[1]/@value',
        orgEMAIL3       VARCHAR2(40) PATH 'assignedOrganization/contactParty/telecom[2]/@value',
        contactPerson3  VARCHAR2(20) PATH 'assignedOrganization/contactParty/contactPerson/name'
     ) detail
;

  • Error messages related to link the style sheet

    I work in Dreamweaver CS4 and is currently shooting an index.html in an index.dwt (model). When I went to check the compatibility with the browsers that I received errors related to this line:

    "" < link href = "... / index.css ' rel ="stylesheet"type =" text/css"/ >

    the entire area is:

    "" < link href = "... / index.css ' rel ="stylesheet"type =" text/css"/ > <!-[if IE] >

    < style type = "text/css" >

    / * place patches css for all versions of Internet Explorer in this conditional comment * /.

    .twoColHybRtHdr #sidebar1 {padding-top: 30px ;}}

    .twoColHybRtHdr #mainContent {zoom: 1; padding-top: 15px ;}}

    / * the owner above zoom gives IE the hasLayout property, he may have to avoid several bugs * /.

    I received error messages are:

    Found 5 errors in index.css

    Affects: Netscape 8.0

    Found 4 errors for index.css

    Affects: Firefox 1.5; Internet Explorer 6.0, 7.0; Internet Explorer for Macintosh 5.2; Opera 8.0, 9.0; Safari 2.0

    Is there a problem with the ".." in the "... / index.css ' or the declaration of EI? I am confused since Dreamweaver informed all that for me.

    I'd appreciate any help you can give me!

    Some errors in stylesheets are expected.  For example, I don't like CSS errors in Netscape more because it is obsolete.  I think I refused validation preferences in DW to ignore errors of IE5 and other lesser browsers Netscape.

    But you might want to run your CSS through this code online validation tool. Maybe it's that you have a badly placed. octothorp point comma or # or another small error that needs fixing.

    HTML Validator - http://validator.w3.org

    CSS Validator - http://jigsaw.w3.org/css-validator/

    Nancy O.
    ALT-Web Design & Publishing
    Web | Graphics | Print | Media specialists
    www.Alt-Web.com/
    www.Twitter.com/ALTWEB

  • ERROR RELATIVE TO THE SITE ROOT-

    I have setup a site on my local machine.
    My site is configured as follows:
    Local root folder: D:\Data\PDFPOP.COM\ElegantAluminum\
    Default images folder: D:\Data\PDFPOP.COM\ElegantAluminum\images\
    Relative links to: the SITE ROOT

    IIS is set to the root directory: D:\Data\PDFPOP.COM\ElegantAluminum\

    When I insert an image in a web page, the source of the image incorrectly displays the relative root as follows:
    SRC="/ElegantAluminum/images/somepic.jpg".

    It should be:
    SRC="/images/somepic.jpg".

    It seems that the root folder is powered correctly, by, including the real root directory folder. With the incorrect image paths, I have to manually change the source of the image so that it appears correctly.


    Is there a problem with my Dreamweaver CS3, or I'm I missed something?

    To see a screen shot: http://www.nk-inc.com/images/Dreamweaver.gif

    Thank you, but, removing, and then by adding the site under the heading "Manage Sites" did the trick.

  • Audio service does not not after download of Creative, restarts, error 0 x 80070002, the system cannot find the file specified

    Yesterday, I downloaded and installed updated Creative to my its Soundblaster card from Windows Update.  It lead me to a large download of Creative for its console related sound and SW, and things worked fine.  When I restarted this morning, there was a horrible loud hum while Windows was loading, and I made a hard stop.  When I rebooted, the buzz was gone, but the icon in the status bar indicates that the sound was off.  The sound message indicates that the audio service is not running.  I tried to restart the computer several times, but the results were the same.  I tried to restart the audio service of the Task Manager, but got an error message 0 x 80070002, the system cannot find the file specified.  Where should I go from here?

    Hi Jfklinger,

    This problem occurs because some legacy applications use files or components that were developed prior to Windows Vista. The names of these audio components may be different in Windows Vista. If the calling application uses the hard-coded file names, the new files and components could not be found.

    To resolve this problem, use one of the following methods to change the audio settings for a device.

    Method 1: use the order Volume of Windows

    To use the Volume of Windows command to change the audio settings for a device, follow these steps:

    1.right - click on the speaker icon in the notification area, and then click devices recording or reading.
    2. double-click - click the device for which you want to set the parameters. For example, double-click on Microphone.
    3. click on the levels tab.
    4. move the cursor upwards or downwards to set the desired volume level, and then click OK.

    Method 2: use Control Panel

    For control panel allows you to change the audio settings for a device, follow these steps:

    1. click on Start, click Control Panel, click hardware and soundand then click sound.
    2. click on the tab playback or recording .
    3. double click the device for which you want to set the parameters. For example, double-click on Microphone.
    4. click on the levels tab.
    5. move the cursor upwards or downwards to set the desired volume level, and then click OK.

    You may receive an error message when you run an application that uses the recording feature or audio playback in Windows Vista
    http://support.Microsoft.com/kb/930095

    Previous post: the result.

    Bindu S - Microsoft Support

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Update iTunes errors, can not find the file iTunes6464.msi

    Try to update iTunes on PC.

    Windows 7 (64-bit) with Intel i5 processor.

    During an update of base, update errors trying to find the file "iTunes6464.msi" he says is not available.

    I tried to delete all the software Apple on PC, but the file final iTunes will not uninstall because of the same file.

    The new apple software download now error with the same error.

    How can I solve this problem?

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    Start by missing error MSI.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • Errors that occur during the iTunes Installation

    Product name: iTunes

    Processor speed: 1.50 GHz

    RAM: 4.00 GB

    Operating system: 10 64-Bit Windows Home

    After leaving my laptop sit idle for a few days, I tried to open iTunes last week, and an error resulting in a ToolTip telling me that a file has been moved, deleted, or damaged. The error message was "error 0x000012f".  I uninstalled iTunes and tried to reinstall to fix the problem, but it does not, because I now have problems with installation of iTunes. Can someone help me?

    Try to repair the Apple Software Update of the programs and features Control Panel, and then reinstall iTunes.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • Error e/s on the insertion of a DVD video disc - Satellite A105-S4284

    My mother bought a Satellite A105-S4284 during a stay in the States. DVD - RAM UJ - 841S with her drive is set to 1 in the region for DVD playback, I want to get it on region 2. I told myself I have 4 changes left, but I am unable to change it. He asked a zone 2 DVD to be inserted and I have administrator privileges - the two conditions are met, but it refuses to work. I then tried to see if she could read the disc at all, however try to access it from the browser I get an IO error. I checked the disc with a variety of drives, CD-ROM, CD Audio, the Toshiba installation/config DVD etc. all read fine, but not DVD-video. I deleted the DVD RAM driver, sought of firmware updates (cannot find a suitable) and updates of pilot (impossible to find).

    I can't work on why he dislikes the video DVD (I tried a lot of discs), even tried with the Media Express Player playback. Because it reads all other formats of discs, it seems unlikely to be a hardware problem, so I think it's a problem with the firmware, but like I said I couldn't find one.

    Any ideas would be greatly appreciated.

    Kind regards
    sab0tage

    BTW happy Christmas

    Hello

    Do you have the drive to region 2 now?
    This might be a reason for the exploration of DVD-related issues.
    It would be very interesting to know if it of possible to explore this DVD on the other computer.
    Additional I think lots of original DVDs is safe and supports some kind of encryption and, therefore, it s not able to open it with Solution Explorer.

    I put t know why you were not able to change the area by car, but perhaps this has something to do with the operating system installed.
    Have you tried to install a new OS from an original CD of Microsoft, and then change the region on the drive?

Maybe you are looking for

  • rotate the document

    I have a HP Officejet Pro 8600. When scanning I frequently neet to rotate a multi-page document. How to turn the entire document at once rather than on a single page at a time.  Sam Bear1

  • drive hard accendentily wiped with the restoration of the system, trying to recover the backup. How can I do this?

    HP Pavilion Slimline s3320f desktop PC Windows Vista My brother tried to get my hard drive to a new computer and accedentally erased the hard drive.  the computer has been saved before this wipe.  I was wondering how to restore or to access saved inf

  • Product # key computer won't save or activate windows.

    Upgrade to Windows 7 Ultimate installed 9.2.2015 & Computer product key # will not activate windows. Original Vista was former number to purchase. Installed 7 Ultimate now has the new number. Can I activate my windows by phone & What's the contact ph

  • BlackBerry Smartphones cannot send or reply to emails (BES)

    Recently I stopped being able to send or answer email on my server on my Blackberry Curve 8310 BES account. Very well, I can receive emails, send and receive calls, send and receive text messages.  I can't send or respond to my Outlook emails. Here's

  • license Windows 8.1

    Hi, have read messages on Mobile 8 machines again, but I would be sure.  I have old pc, it had XP, I've upgraded to windows 8 pro via the Web site, I've updated to 8.1 pro, 32-bit, if I can install 8.1 pro on the new machine that is 64-bit, using the