Error relative to the SRS
I am currently using Laview 2014 with the tool box audio and vibration. I was trying to make an analysis of SRS where the entrance was a shock pulse demi-sinusoide measured in G, and the result should be the relative shift SRS. I used the example NEITHER provided "Shock Response (simulated) Specturm". When I use the absolute acceleration that the output, the results are correct. At a natural frequency of 81,27 Hz, the SRS is 165G or ~ 63 756 in / s ^ 2 when I use relative displacement as output with units of inches, the results appear to be in error. At a natural frequency of 81,27 Hz, the relative movement of the results is 63 580 in. Quickly note that the main transaction that took place is a unit conversion. It is unreasable having a relative movement of this size for the alleged entry. Does anyone know if the Toolbox makes an assumption about the type of entry? Maybe must match the input and output. For example, if you want a relative movement, then you must put a displcament waveform in. Someone saw?
I have attached a picture of my settings.
Has investigated more and taken from the book there. There is an error in the sound and vibration toolkit of NOR provided definatley. I rewrote my own version and it works fine. I have never here of R & D.
Tags: NI Software
Similar Questions
-
New Windows important day of facilities; get #80073715 error message when you try to install; numbers (KB97145) are included with the update message. Thanks for any help.
Hello
1 let us know the list of the updates that fail to install?
2. we can know the full error code/message you receive?
Follow the steps below:
Method 1:
Open the Windows Update troubleshooting tool
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter
Method 2:
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows
It could be useful!
-
Can't open a PDF document: error related to the "data execution prevention".
original title: data execution preventionI have a pdf file, I use to get in but can not now because of the prevention of execution of data and can not turn off because I don't know the name of the file
Hello
1 how long have you been faced with this problem?
2 did you recent hardware or software changes to your computer before this problem?
3. this happens with some file in particular?
4. What is the full and exact error message?Please answer these questions that could help us help you better.
See the bottom of the article for more information on data execution prevention.
What is Data Execution Prevention?http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-data-execution-prevention
-
Several errors related to the firewall w / Windows 7 error - error 1075 - 0 x 80070433.
I tried for a few hours now to get my firewall works properly. I have already installed Norton, I've heard can cause some problems. I uninstalled Norton and all other my computer protection products. I also used the tool Windows Update FIX IT and FIX IT Firewall tool. None of this has helped to solve the problem. After going through a few threads, I even tried to copy some of the executable code to update the registry. At this point, I haven't met any other ideas on how to solve this problem. Can someone help me?
Hi Tonyp,
If you haven't tried, please uninstall Norton anti-virus using the Norton removal tool and check if this solves the problem.
https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us
If the problem persists, please refer to the steps suggested in the following link and check if this solves the problem.
Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.
Hope that the information provided is useful. Do not respond if you need more help.
-
ERROR RELATIVE TO THE SITE ROOT-
I have setup a site on my local machine.
My site is configured as follows:
Local root folder: D:\Data\PDFPOP.COM\ElegantAluminum\
Default images folder: D:\Data\PDFPOP.COM\ElegantAluminum\images\
Relative links to: the SITE ROOT
IIS is set to the root directory: D:\Data\PDFPOP.COM\ElegantAluminum\
When I insert an image in a web page, the source of the image incorrectly displays the relative root as follows:
SRC="/ElegantAluminum/images/somepic.jpg".
It should be:
SRC="/images/somepic.jpg".
It seems that the root folder is powered correctly, by, including the real root directory folder. With the incorrect image paths, I have to manually change the source of the image so that it appears correctly.
Is there a problem with my Dreamweaver CS3, or I'm I missed something?
To see a screen shot: http://www.nk-inc.com/images/Dreamweaver.gif
Thank you, but, removing, and then by adding the site under the heading "Manage Sites" did the trick.
-
Microsoft Tun Miniport adapt #2 /.
Microsoft Tun Miniport Adapter #2 / it is disabled (code 22) / this device cannot start (code 10). I need help to activate the network adapter.
Description: Broadcom 802. 11b / g wlan - Packet Scheduler Miniport
Device ID: root | * tunmp \0001
status 0 x 01802401 has problem
0x0000000a problem (10)Hi GGisin,-Did you change on your computer before this problem?Follow the steps listed in the article below for the mentioned error code:
Explanation of error codes generated by Device Manager in Windows XP Professional
Note: The information provided in this article are applicable to other versions of Windows XP as well.Additional reference on: -
Microsoft Dynamics SL 2011 client fails on a workstation during the upgrade from SL 7. Works fine on 2 other workstations.
Administrator area on the client computer. Run install drive mapped to a server running Windows Server 2008 R2. Workstation is Windows 7, 64 bit. Uninstalled antivirus. Tried to restore to restore the system a few days ago. Same results.
Gets the information of publishing point product, then get the error. First error relates to the installation of the assembly. Then get error code 1603.
Here is the log that is created:
2012-08-15 14:54:08, CBS TrustedInstaller info start initialization.
2012-08-15 14:54:08, v6.1.7600.16385 of information CBS responsible for Servicing Stack with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7600.16385_none_655452efe0fb810b\cbscore.dll
2012-08-15 14:54:08, called CSI Info 00000001@2012/8/15:19:54:08.727 WcpInitialize (wcp.dll version 0.0.0.6) (battery @0x7fef1d1e9a1 @0x7fef1fd8755 @0x7fef1fa2ac7 @0xff40e94c @0xff40d769 @0xff40daff)
2012-08-15 14:54:08, called CSI Info 00000002@2012/8/15:19:54:08.727 WcpInitialize (wcp.dll version 0.0.0.6) (battery @0x7fef1d1e9a1 @0x7fef202500e @0x7fef1ff1504 @0x7fef1fa2b9d @0xff40e94c @0xff40d769)
2012-08-15 14:54:08, called CSI Info 00000003@2012/8/15:19:54:08.727 WcpInitialize (wcp.dll version 0.0.0.6) (battery @0x7fef1d1e9a1 @0x7fef3e28728 @0x7fef3e28856 @0xff40e444 @0xff40d7ae @0xff40daff)
2012-08-15 14:54:08, initialization information CBS ending TrustedInstaller.
2012-08-15 14:54:08, CBS info from the main loop of TrustedInstaller.
2012-08-15 14:54:08, info CBS TrustedInstaller service starts successfully.
2012-08-15 14:54:08, CBS M² info: initializing online with opt-in Windows: real
2012-08-15 14:54:08, CBS M² info: cleaning of report files older than 10 days.
2012-08-15 14:54:08, info CBS M²: requiring all reports pending upload.
2012-08-15 14:54:08, info CBS M²: queue 0 file (s) for download with motif: C:\Windows\servicing\sqm\*_std.sqm, flags: 0 x 2
2012-08-15 14:54:08, info CBS M²: queue 0 file (s) for download with motif: C:\Windows\servicing\sqm\*_all.sqm, flags: 0 x 6
2012-08-15 14:54:08, CBS News no treatment necessary start-up, TrustedInstaller service was not defined as autostart, either a reboot is still pending.
2012-08-15 14:54:08, CBS NonStart info: check to ensure the treatment of start-up was not necessary.
2012-08-15 14:54:08, info CSI 00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDisposition = @0xfafab0)
2012-08-15 14:54:08, info CSI 00000005 NT transaction creation (seq 1), objectname [6] "(null) '"
2012-08-15 14:54:08, result of transactions (1) Info CSI 00000006 created NT seq 0x00000000, manage @0x1e4
2012-08-15 14:54:08, Info CSI 00000007@2012/8/15:19:54:08.758 CSI perf trace:
CSIPERF:TXCOMMIT; 14264
2012-08-15 14:54:08, CBS NonStart info: success, start, treatment not required, as expected.
2012-08-15 14:54:08, info CBS start processing thread ended normally
2012-08-15 14:54:08, info SXS install all of C:\Windows\WinSxS\InstallTemp\20120815145407417.0\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_79404cdd.manifest
2012-08-15 14:54:08, info SXS submitting transactions scene with 3 operations
2012-08-15 14:54:08, info CSI 00000008 outcome 3 operations; 3 are not lock/unlock and follow:
(1) Stadium: flags: 8 app: [Microsoft.VC80.ATL, Version 8.0.50727.4053, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) comp: Microsoft.VC80.ATL, Version = 8.0.50727.4053, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral man: @0x44cf28
StageFile (2): flags: 8 app: [Microsoft.VC80.ATL, Version 8.0.50727.4053, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) comp: Microsoft.VC80.ATL, Version = 8.0.50727.4053, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral file: [ml:20 {10} l:18 {9}] "" srcfile ATL80.dll : @0x44d048
AddCat (14): flags: catfile 0: @0x44d168
2012-08-15 14:54:08, info CSI 00000009 creating NT seq transaction (2), objectname [6] "(null) '"
2012-08-15 14:54:08, CSI of information 0000000 created NT transaction (seq 2) result 0x00000000, manage @0 x 208
2012-08-15 14:54:08, Info CSI 0000000b@2012/8/15:19:54:08.961 CSI perf trace:
CSIPERF:TXCOMMIT; 137063
2012-08-15 14:54:08, info SXS submitting install transaction
2012-08-15 14:54:09, CSI of information 0000000 c 1 performing operations; 1 will not lock/unlock and follow:
Installation (5): flags: 0 tlc: [Microsoft.VC80.ATL, Version 8.0.50727.4053, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) Ref: (flgs: guid 00000000: {27dec61e-b43c-4ac8-88db-e209a8242d90} name: [0] "" ncdata: [l:62{31}]"C:\Windows\system32\msiexec.exe" ") print: [l:128 {64}] '73dfdd8f4f777c27a3a7f3b2bf95daa46d7b7d46b977c4b156b63830090d1b7a '.
2012-08-15 14:54:09, component change information 0000000 d CSI list:
2012-08-15 14:54:09, CSI Info transaction 0000000e Creating NT seq (3), objectname [6] "(null) '"
2012-08-15 14:54:09, CSI 0000000f creating NT transaction Info (seq 3) result 0x00000000, manage @0 x 258
2012-08-15 14:54:10, Info CSI 00000010@2012/8/15:19:54:10.895 CSI perf trace:
CSIPERF:TXCOMMIT; 1751513
2012-08-15 14:54:10, info CSI 00000011 NT seq transaction creation (4), objectname [6] "(null) '"
2012-08-15 14:54:10, result of transactions (seq. 4) Info CSI 00000012 created NT 0x00000000, manage @0 x 238
2012-08-15 14:54:10, Info CSI 00000013@2012/8/15:19:54:10.911 CSI perf trace:
CSIPERF:TXCOMMIT; 9162
2012-08-15 14:54:10, info SXS install all of C:\Windows\WinSxS\InstallTemp\20120815145407619.0\amd64_Microsoft.VC80.MFC_1fc8b3b9a1e18e3b_8.0.50727.4027_x-ww_e983d1b5.manifest
2012-08-15 14:54:10, info SXS submitting transactions scene with 6 operations
2012-08-15 14:54:10, info CSI 00000014 6 operations; 6 are not lock/unlock and follow:
(1) Stadium: flags: 8 app: [Microsoft.VC80.MFC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) comp: Microsoft.VC80.MFC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral man: @0x44da68
StageFile (2): flags: 8 app: [Microsoft.VC80.MFC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) comp: Microsoft.VC80.MFC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral file: [ml:22 {11} l:20 {10}] "" srcfile mfcm80.dll : @0x44caa8
StageFile (2): flags: 8 app: [Microsoft.VC80.MFC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) comp: Microsoft.VC80.MFC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral file: [ml:22 {11} l:20 {10}] "" srcfile mfc80u.dll : @0x44bed8
StageFile (2): flags: 8 app: [Microsoft.VC80.MFC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) comp: Microsoft.VC80.MFC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture
2012-08-15 14:54:10, CSI Info neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral file: [ml:20 {10}, l:18 {9}] "mfc80.dll" srcfile: @0x44db88 "
StageFile (2): flags: 8 app: [Microsoft.VC80.MFC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) comp: Microsoft.VC80.MFC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral file: [ml:24 {12} l:22 {11}] "" srcfile mfcm80u.dll : @0x44dc18
AddCat (14): flags: catfile 0: @0x44cce8
2012-08-15 14:54:10, info CSI 00000015 NT seq transaction creation (5), objectname [6] "(null) '"
2012-08-15 14:54:10, result of transactions (seq 5) Info CSI 00000016 created NT 0x00000000, manage @0 x 234
2012-08-15 14:54:11, Info CSI 00000017@2012/8/15:19:54:11.145 CSI perf trace:
CSIPERF:TXCOMMIT; 94628
2012-08-15 14:54:11, info SXS submitting install transaction
2012-08-15 14:54:11, info CSI 00000018 1 performing operations; 1 will not lock/unlock and follow:
Installation (5): flags: 0 tlc: [Microsoft.VC80.MFC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) Ref: (flgs: guid 00000000: {27dec61e-b43c-4ac8-88db-e209a8242d90} name: [0] "" ncdata: [l:62{31}]"C:\Windows\system32\msiexec.exe" ") print: [l:128 {64}] '52781fdaa439189f9cc4ad7b5ab1ecad147836e4fca8535a69d9e55ce897c170 '.
2012-08-15 14:54:11, the change of information CSI 00000019 components list:
2012-08-15 14:54:11, transaction CSI Info 0000001 creating NT seq (6), objectname [6] "(null) '"
2012-08-15 14:54:11, CSI Info 0000001 b NT created transaction (seq 6) result 0x00000000, manage @0 x 298
2012-08-15 14:54:11, Info CSI 0000001c@2012/8/15:19:54:11.363 CSI perf trace:
CSIPERF:TXCOMMIT; 215040
2012-08-15 14:54:11, CSI Info 0000001 d Create NT seq operation (7), objectname [6] "(null) '"
2012-08-15 14:54:11, Info CSI 0000001e NT transaction creation (seq 7) result 0x00000000, manage @0x29c
2012-08-15 14:54:11, Info CSI 0000001f@2012/8/15:19:54:11.379 CSI perf trace:
CSIPERF:TXCOMMIT; 9779
2012-08-15 14:54:11, info SXS install all of C:\Windows\WinSxS\InstallTemp\20120815145407604.2\amd64_Microsoft.VC80.MFCLOC_1fc8b3b9a1e18e3b_8.0.50727.4027_x-ww_3ed2eab3.manifest
2012-08-15 14:54:11, info SXS submitting scene with 11 operations transactions
2012-08-15 14:54:11, info CSI 00000020 11 performing operations; 11 will not lock/unlock and follow:
(1) Stadium: flags: 8 app: [Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) comp: Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral man: @0x44c988
StageFile (2): flags: 8 app: [Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) comp: Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral file: [ml:26 {13} l:24 {12}] "" srcfile mfc80CHS.dll : @0x44c508
StageFile (2): flags: 8 app: [Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) comp: Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral file: [ml:26 {13} l:24 {12}] "mfc80CHT.dll"srcfile : @0x44c478
StageFile (2): flags: 8 app: [Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) comp: Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_AR
2012-08-15 14:54:11, CHITECTURE_AMD64 CSI Info (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral file: [ml:26 {13}, l:24 {12}] "mfc80ESP.dll" srcfile: @0x44cc58 "
StageFile (2): flags: 8 app: [Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) comp: Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral file: [ml:26 {13} l:24 {12}] "" srcfile mfc80ENU.dll : @0x44cb38
StageFile (2): flags: 8 app: [Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) comp: Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral file: [ml:26 {13} l:24 {12}] "mfc80DEU.dll"srcfile : @0x44bed8
StageFile (2): flags: 8 app: [Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) comp: Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral file: [ml:26 {13} l:24 {12}] "" srcfile mfc80FRA.dll : @0x44ce08
StageFile (2): flags: 8 app: [Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutr]
([2012-08-15 14:54:11, CSI Info al, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) comp: Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral file: [ml:26 {13}, l:24 {12}] "mfc80ITA.dll" srcfile: @0x44d4c8 "
StageFile (2): flags: 8 app: [Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) comp: Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral file: [ml:26 {13} l:24 {12}] "" srcfile mfc80JPN.dll : @0x44c1a8
StageFile (2): flags: 8 app: [Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) comp: Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral file: [ml:26 {13} l:24 {12}] "mfc80KOR.dll"srcfile : @0x44d318
AddCat (14): flags: catfile 0: @0x44bff8
2012-08-15 14:54:11, info CSI 00000021 NT seq transaction creation (8), objectname [6] "(null) '"
2012-08-15 14:54:11, result of transactions (seq 8) Info CSI 00000022 created NT 0x00000000, manage @0 x 270
2012-08-15 14:54:11, Info CSI 00000023@2012/8/15:19:54:11.738 CSI perf trace:
CSIPERF:TXCOMMIT; 253519
2012-08-15 14:54:11, info SXS submitting install transaction
2012-08-15 14:54:11, info CSI 00000024 1 operations; 1 will not lock/unlock and follow:
Installation (5): flags: 0 tlc: [Microsoft.VC80.MFCLOC, Version = 8.0.50727.4027, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10 {5}] "win32", TypeName neutral, PublicKey neutral]) Ref: (flgs: guid 00000000: {27dec61e-b43c-4ac8-88db-e209a8242d90} name: [0] "" ncdata: [l:62{31}]"C:\Windows\system32\msiexec.exe" ") print: [l:128 {64}] 'a6a438e0f9050fe23520799d17daa5b3c40ec9dcfcfc1a1d9a186ff496f32dc0 '.
2012-08-15 14:54:11, the change of information CSI 00000025 components list:
2012-08-15 14:54:11, info CSI 00000026 NT seq transaction creation (9), objectname [6] "(null) '"
2012-08-15 14:54:11, result of transactions (seq 9) Info CSI 00000027 created NT 0x00000000, manage @0 x 258
2012-08-15 14:54:11, Info CSI 00000028@2012/8/15:19:54:11.800 CSI perf trace:
CSIPERF:TXCOMMIT; 60676
2012-08-15 14:54:11, info CSI 00000029 NT seq transaction creation (10), objectname [6] "(null) '"
2012-08-15 14:54:11, CSI Info 0000002a NT created transaction (seq 10) result 0x00000000, manage @0x25c
2012-08-15 14:54:11, Info CSI 0000002b@2012/8/15:19:54:11.816 CSI perf trace:
CSIPERF:TXCOMMIT; 11134
2012-08-15 14:54:11, info SXS install all of C:\Windows\WinSxS\InstallTemp\20120815145407604.0\8.0.50727.4053.policy
2012-08-15 14:54:11, info SXS submitting transactions scene with 2 operations
2012-08-15 14:54:11, Info CSI 0000002 c perform 2 operations; 2 are not lock/unlock and follow:
(1) Stadium: flags: 8 app: [policy.8.0.Microsoft.VC80.ATL, Version 8.0.50727.4053, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:24 {12}] 'win32-policy', TypeName neutral, PublicKey neutral]) comp: policy.8.0.Microsoft.VC80.ATL, Version 8.0.50727.4053, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:24 {12}] 'win32-policy', TypeName neutral, PublicKey neutral man: @0x44ca18
AddCat (14): flags: catfile 0: @0x44c628
2012-08-15 14:54:11, transaction 0000002d CSI Info creating NT seq (11), objectname [6] "(null) '"
2012-08-15 14:54:11, CSI 0000002e Info created NT (seq 11) transaction result 0x00000000, manage @0x2a4
2012-08-15 14:54:11, Info CSI 0000002f@2012/8/15:19:54:11.909 CSI perf trace:
CSIPERF:TXCOMMIT; 57876
2012-08-15 14:54:11, info SXS submitting install transaction
2012-08-15 14:54:11, info CSI 00000030 1 operations; 1 will not lock/unlock and follow:
Installation (5): flags: 0 tlc: [policy.8.0.Microsoft.VC80.ATL, Version 8.0.50727.4053, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:24 {12}] 'win32-policy', TypeName neutral, PublicKey neutral]) Ref: (flgs: guid 00000000: {27dec61e-b43c-4ac8-88db-e209a8242d90} name: [0] "" ncdata: [l:62{31}]"C:\Windows\system32\msiexec.exe" ") print: [l:128 {64}] '3a2eb93af7df73651872b222dde139b56057c83e49d165fd8d71f0f61624a5a3 '.
2012-08-15 14:54:11, info CSI 00000031 changes with a shadow misses his manifesto - policy.8.0.Microsoft.VC80.ATL, Version = 8.0.50727.762, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:24 {12}] 'win32-policy', TypeName neutral, PublicKey neutral
2012-08-15 14:54:11, d:\w7rtm\base\wcp\componentstore\csd_winners.cpp(935) 00000032@2012/8/15:19:54:11.909 (F) CSI of the error: error STATUS_SXS_TRANSACTION_CLOSURE_INCOMPLETE from the OriginateManifestsMissingError expression function: (null)
[gle = 0 x 80004005]
2012-08-15 14:54:12, error CSI 00000033 (F) STATUS_SXS_TRANSACTION_CLOSURE_INCOMPLETE #10173 # to CCSDirectTransaction::PerformChangeAnalysis (...) [gle = 0xd0150024]
2012-08-15 14:54:12, error CSI 00000034 (F) STATUS_SXS_TRANSACTION_CLOSURE_INCOMPLETE #10172 # to CCSDirectTransaction::PrepareForCommit (...) [gle = 0xd0150024]
2012-08-15 14:54:12, error CSI 00000035 (F) STATUS_SXS_TRANSACTION_CLOSURE_INCOMPLETE #10171 # to CCSDirectTransaction::ExamineTransaction (...) [gle = 0xd0150024]
2012-08-15 14:54:12, error CSI 00000036 (F) STATUS_SXS_TRANSACTION_CLOSURE_INCOMPLETE #10170 # to CCSDirectTransaction_IRtlTransaction::ExamineTransaction (...) [gle = 0xd0150024]
2012-08-15 14:54:12, info CSI 00000037 changes with a shadow misses his manifesto - policy.8.0.Microsoft.VC80.ATL, Version = 8.0.50727.762, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope neutral, PublicKeyToken is {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:24 {12}] 'win32-policy', TypeName neutral, PublicKey neutral
2012-08-15 14:54:12, d:\w7rtm\base\wcp\componentstore\csd_winners.cpp(935) 00000038@2012/8/15:19:54:12.159 (F) CSI of the error: error STATUS_SXS_TRANSACTION_CLOSURE_INCOMPLETE from the OriginateManifestsMissingError expression function: (null)
[gle = 0 x 80004005]
2012-08-15 14:54:12, error CSI 00000039 (F) STATUS_SXS_TRANSACTION_CLOSURE_INCOMPLETE #10369 # to CCSDirectTransaction::PerformChangeAnalysis (...) [gle = 0xd0150024]
2012-08-15 14:54:12, error CSI 0000003 a (F) STATUS_SXS_TRANSACTION_CLOSURE_INCOMPLETE #10368 # to CCSDirectTransaction::PrepareForCommit (...) [gle = 0xd0150024]
2012-08-15 14:54:12, error CSI 0000003 b (F) STATUS_SXS_TRANSACTION_CLOSURE_INCOMPLETE #10367 # to CCSDirectTransaction::GenerateComponentChangeList (...) [gle = 0xd0150024]
2012-08-15 14:54:12, error CSI 0000003 c (F) STATUS_SXS_TRANSACTION_CLOSURE_INCOMPLETE #10366 # to Windows::COM:CPendingTransaction:ExtractInformationFromRtlTransaction (...) [gle = 0xd0150024]
2012-08-15 14:54:12, error CSI 0000003d (F) HRESULT_FROM_WIN32 (ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE) #10048 # to Windows::COM:CPendingTransaction:IStorePendingTransaction_Analyze (...) [gle = 0x8007371b]
2012-08-15 14:54:12, SXS error analyze Transaction failed with 0x8007371bPlease indicate additional measures to solve this problem. Thank you!
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. Please ask your question in the Microsoft Dynamics Forum.
-
Error received during the replacement of the DBAT connector
Hello
We have successfully uninstalled the DBAT connector. During re - install, we received an error related to the targetsystems-lib in $MW /Oracle_IDM1/Server /ConnectorDefaultDirectory /targetsystems-lib/dbat-11.1.1. 5.0.
We have renamed the lib-targetsystems for targetsystems-lib_SAVED and reinstalled the connector successfully.
However, when you run the user DBAT reconciliation, we received an error message saying "no jdbc driver is found in the CLASSPATH. We tried to restore the $MW /Oracle_IDM1/Server /ConnectorDefaultDirectory /targetsystems-lib/dbat-11.1.1. 5.0/ojdbc*.jar rear and set the CLASSPATH in the setDomainEnv.sh, restarted Server Admin and IOM managed server. Still, there is no help.
We always get the same error for putting into service or reconciliation.
Is there a way to fix this, or do we need to uninstall and reinstall again?
Thank you
Khanh
I highly recommend that install the server connector for use if you get errors class jdbc. It will insulate the pot for you.
-Kevin
-
Error related to linear the predictive coding (LPC) for speech recognization in Labview
Hello
I m doing a program in labview for speech recognization in labview. I'm doing a file .wav 'before' word and convert it to data waveform and use linear predictive coding (LPC) Subvi which available in the site OR the voiceanalysis program to generate graphic formants. I get two error but I m get not the average of this error... If anyone can tell me how to solve this error and what the error means. ?
Please someone help me... I m all confused.
I am attaching two file related to the error...
We would need to see the code for help, these error message snapshots are not particularly useful - they seem to indicate that your waveform is empty?
-
Could not find the SRS audio device error
Since I installed Windows7 on my laptop, I got the error "Unable to find compatible SRS audio device" on start up. I checked the "Device Manager" and all audio devices seem to work normally. I have re-installed Windows7 and I still have the same problem. When I play music, I get static on my speakers. When I use a trial subscription to a SRS audio product for purchase, the problem goes away. I want to fix this problem without having to pay for one of the products of the SRS.
Uninstall the driver, reboot the system. The attempt to install the same driver for Windows Vista using Windows troubleshooting. Make a right click on the file executable/installer driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.
Resources:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
-
several errors at startup related to the file missing error rasman.dll
several errors at startup related to the file missing error rasman.dll
Hello
1 did you changes to the computer before the show?
2. What is the exact error message or error code?I suggest you perform the clean boot and check if that helps you.
How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135
Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual.It will be useful.
-
How to fix error "connection to the server has expired"?
I'm having the same problem, as shown here: https://support.mozilla.org/en-US/questions/1068987
From today I get [email protected] server connection timed out ' error.
I was running v31.x, so I've updated to 38.x but I; m until the question.
-Two separate IMAP e-mail accounts are defective; both are MediaTemple email accounts; No config has changed; I am able to access recent messages via iPhone and through the webmail interface.
-J' restarted Thunderbird in safe mode, but that did not help.
I checked the password and any other standard "is it plugged in?" the kind of things
-I went to the configuration editor and brought up delays in mailnews.tcptimeout, mail.server.server1.timeout, etc. all at 300, no help here eitherAny ideas how to fix?
colinjohnston said
I'm having the same problem, as shown here: https://support.mozilla.org/en-US/questions/1068987
From today I get [email protected] server connection timed out ' error.
I was running v31.x, so I've updated to 38.x but I; m until the question.
-Two separate IMAP e-mail accounts are defective; both are MediaTemple email accounts; No config has changed; I am able to access recent messages via iPhone and through the webmail interface.
-J' restarted Thunderbird in safe mode, but that did not help.
I checked the password and any other standard "is it plugged in?" the kind of things
-I went to the configuration editor and brought up delays in mailnews.tcptimeout, mail.server.server1.timeout, etc. all at 300, no help here eitherAny ideas how to fix?
Update: [solved]
Although everything else about my internet connection worked perfectly well, I suspected that maybe this question was related to the other oddities that I experience with my Comcast DOCSIS modem. I restarted the modem and without timeouts more in Thunderbird. Again, I didn't have no other question similar with connectivity, but my IMAP authentication uses port 993, and there was something stuck on the subject through my connection. Maybe this info will help some people to solve the problems they are the way out of this problem.
-
error message in the terminal window
I created a new profile. And, in doing so, you work with a terminal window.
During this process, I noticed this error message when I use FF
I receive the error message in the terminal window and I can confirm that I see what you were using a new profile or old"Socket error [AGENT]: [object [object event] XrayWrapper]; readyState = 3. Maybe Helper does not work on xxxx or stop? "Console.Error: onepassword:"
XX is a number - do not know if has been deprived so xxx.
What does this message mean?
I have problems connecting with 2 services I use. I can't even log a new question in my old account of support of ff. I have EDT cleared the cache, cookies, history, started in safe mode.
I restarted the router.but nothing works
ideas?I also have
-restarted my system.
-retested, and the message appears only when I use firefoxEDIT
solved by uninstalling the related to the addon of 1password desktop application. Desktop application is the mac version of 1password. -
Pavilion 17-e016dx: problem related to the AMD EEU customer
At the start of the following error appears in a small window:
Client AMD EEU: atieclxx.exe error - application. The instruction at 0x6ac0e7f9 referenced memory at 0x00000020 could not be read.
Click OK to continue.
Which means that everything? What should I do to solve the problem?
Thank you
Hello @kingharry1,
Welcome to the Forums of HP Support!
I read your post about the question of memory and wanted to help you!
The error indicates a problem of memory, which seems to be related to your graphics card. Have you done any software or hardware recently made to your laptop? In the meantime, try to review the following documents and let me know how it goes:
HP PC - Error Messages on a blue screen during start-up or start-up (Windows 10, 8, 7)
HP PC - Error Messages display on a black screen during startup or start-up (Windows 10, 8, 7)
Also, here are some additional resources that may be useful:
AMD EEU customer: atieclxx.exe - Application error
(They are not HP support websites).
Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek. In addition, by clicking on the Thumbs up below is a great way to say thank you!
Have a great weekend!
-
NonLinearFitWithWeight do not erturn of error if exceeded the maximum number of iterations
Hello
It seems to me that the NonLinearFitWithWeight function does NOT return an error if the maximum number of iterations is reached without achieving a solution – unlike the description in the manual...
Previously, I had reported a bug related to the NonLinearFitWithMaxIters function that has been fixed in CVI2009 (bug ID 183434). However, since this function nonlinearfitwithweight is new on CVI2009, there could well be a bug too...
Wolfgang
Maybe you are looking for
-
I was working on an email last night and must have something that I want to not defined. When I say firefox, this is full-screen, but without any menu or toolbars. Even when I move the cursor to the top of the screen to reveal what's there, yet there
-
Question about the use of the memory modules
I have a dilemma between the use of a new 1 GB memory (what I intend to buy) with more speedand by using the 1 GB + my old 256 with less speedwhich option will contribute more?
-
Problem: I downloaded and installed LabVIEW 8.5.1 for use in my FIRST competition, but Labview does not accept my activation code. I put the file in ... \National Instruments\Shared\License Manager\Licenses. I read that all http://decibel.ni.com/co
-
Impossible to update the PC Dell laptop with Microsoft or Windows 8.1 updates
I have two windows on the PC at home. The desktop machine has detected the 8.1 update and I installed it without any problems whatsoever (XPS from Dell all-in-one 32-bit). The laptop (Dell 14z Ultrabook - 64-bit) did not detect the update. I tried vi
-
Hi gurus/masters.Please advise on Oracle Text? I search in google. But getting junk info. Is this feature is there in oracle?ConcerningSA