Error: "Setup cannot copy the NTLDR file" installation of SP3

Similar Questions

• Windows xp sp2 Setup error: Setup cannot copy the file: usrshuta.exe.

  I want to install windows xp sp2 on the new hard drive and got the following error: Setup cannot copy the file: usrshuta.exe. How to do this?

  Hi grant561,

  Usrshuta.exe is a process belonging to the family of US Robotics communications hardware and provides additional support to the US Robotics modems.

  I suggest that you disconnect all external devices connect to the computer except the keyboard and mouse and proceed with the installation.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

• I get an error "Setup cannot copy the file els.dll" during the installation of Service Pack 3.

  The installation fails every time with this error. I can see and select the file in the temp folder, but it won't work. Any help would be appreciated. '

  Original title: 'Setup cannot copy the file els.dll' during the upgrade to Windows XP SP2 to SP3.

  In fact, I corrected it an hour ago and was meaning that close the message. I cleaned with CCleaner temporary files, downloaded the SP3 Installer on its own (no windows update) and disabled the antivirus. I was able to complete the installation.

  Thanks for the reply!

• Setup cannot copy the c_20936.nl file during the installation of additional languages

  original title: Setup cannot copy the file c_20936.nl

   

  I have windows xp sp3 and try to install additional languages, East Asian and I get this error on copy. "Setup cannot copy the file c_20936.nl. Make sure that the disk in the Windows XP Professional CD is in the drive selected below, or provide the location where the file is located. "Copy the files: D:\j386. Need help, what can I do, I have the correct cd in the cd drive, but I get the error of copying.

  Hello

  Step 1:

  I suggest that you try to copy the folder i368 on the computer, and then try to install it from there and check if it installs.

  Step 2:

  Follow the steps mentioned below.

  a. Click Start and then click Control Panel.

  b. double-click regional and Language Options.

  c. click on the languages tab, click details and then click Add.

  d. under input language, add the language that you want to use.

  e. under Configuration keyboard/IME, click the keyboard layout that you want, and then click OK.

  Check the links below.

  List of languages supported in Windows 2000, Windows XP and Windows Server 2003

  http://support.Microsoft.com/kb/292246

  How to add and enable additional languages in Windows

  http://support.Microsoft.com/kb/177561

  Download languages for Windows

  http://Windows.Microsoft.com/en-us/Windows/downloads/languages-XP

• I am trying to format my PC and when the installer loads of my key USB Kingston, he said: Setup cannot copy the file XPtspCom.inf.

  Setup cannot copy the file XPtsp Com.inf

  Hi all!
  I try to format my PC and what configuration is loading my Kingston USB key, said he: Setup cannot copy the file XPtspCom.inf.

  I use Windows XP Professional Edition SP3.
  How do slove this problem please to continue to work with my PC?
  Thanks in advance!

  You should not use these programs, but if you want a USB key to install then you should make an ISO file and then using Unebootin according to me this is a best software to USB for xp and if you have windows 7 installed in one of your system, then you can use tool usb windows 7.

• Setup cannot copy the file hpinkins5412.exe

  Setup cannot copy the file hpinkins5412.exe

  Using full features software and pilot OJ6500_E710n - z_334.4

  When I use this version:

  full feature software and driver OJ6500_E710n-z_1315

  All software installs normally.  I get all the correct screens.  I connect to a network printer. He fined the printer. He asks me where (postcode), I use the software.  I re - start.  The drivers are not installed.  I have run the diagnostics.  He said that the drivers are not installed.

  HP Officejet 6500 has more 710n

  XP Pro sp3

  I solved the problem with the latest version of the software:

  full feature software and driver OJ6500_E710n-z_1315

  The pilot would not have installed.  I used this web page to fix:

  http://support.HP.com/us-en/document/c01084522

  Thank you

  Docfxit

• How to fix a packaging error - "cannot copy the linked files?

  I use a file that I used previously to a directory.  I rename to use the layout, but use all of the new images, etc.  It shows all links are good in the document, but when I go to package, I get the message that it cannot copy the related files.  I have InDesign CC 2014 and OS X El Capitan.  Any ideas on a fix?

  Looking for special characters in link names. I think that only dashes and underscores (maybe a few others) are allowed in file names. Also look for foreign language characters.

• Impossible to remove a file from the desktop, get the error message "cannot read the source file or disk.

  I can't delete a file from my counter top. Error message: cannot read the source file or disk. He is an Adobe file with logo in white box.

  Boot into safe mode and see if it will remove. If this is not the case, try this tool.

  Unlocker File Remover

  Download it from FileHippo
  http://filehippo.com/download_unlocker/

  Download from CNET
  http://download.CNET.com/WOT/3000-2378_4-75011499.html

• Restore failed image because of the message error "system cannot find the specified file (0 x 80070002). Is my file of the backup OK folder structure?

  I had to reinstall clean Windows 7 64-bit because of the failure of the RAID 1. I have a picture of my original installation system, but I can't restore it; everything I try, I get the message "system cannot find the specified file (0 x 80070002).  I work through a number of possible solutions, without success so far.

  According to the kb/951002 (that is for Vista but I can't find an alternative for Win 7) I made sure that the SYSTEM account has read permission for the backup folders and subfolders.  However, the file structure of the specified in the above article backup folder is different from my image file structure.  Specifically, article specified a structure of 'N.zip' file for the backup files but mine are a mixture of XML documents and VHD - i.e. no "zip" files Also, my GlobalCatalog file does not what kind of file, for example, it wouldn't ".wbcat" required file type specified in the article.

  The differences above could explain the inability to restore the image and if so, any ideas on what to do about it?

  Kind regards

  Ian

  Thanks Mick, will redirect the request.

  Kind regards

  Ian

• How to print after the Error Msg: cannot convert the postscript file

  "Maverick", we installed our MacBook Pro and our printer is a HP 8600.  We have failed to get our Adobe Acrobat Professional 8 to print our PDF files.  Instead, we got the error msg: impression: cannot convert the postscript file.  We have used this application for years without any problem.  How do we solve this problem so that our request will BE "convert postscript file" or do we not have to spend several hundred dollars to upgrade?

  I think that we have solved the problem.  Instead of looking for the solution via Adobe, we went to our info from the printer online, which was the HP OfficeJet 8600.  We found the printer drivers special for our system of operating newly installed Maverick for our MacBook Pro.  After having downloaded and installed the new drivers by fashion, we tested print a pdf document, and it was printed without any problems.

• System cannot find the specified file (installation HPC4680)

  I tried to install the HP C4680 without result. I get the system cannot find the file specified error meessage. It is a brand new computer. Windows 8. I already followed instructions from another post on how to uninstall and I restarted the computer.

  Hello amywatsand welcome to the Forums of HP, I hope you enjoy your experience!

  I see your are your printer installation issues.  I would like to help.

  I would say uninstalling the software of the printer.

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Cannot download game - error message "cannot create the temporary file.

  Run windows 7 Home premium edition. Don't let me download games on a gaming site (Zylom). Used to have no problem with XP. Now on a new computer and cannot block the security settings. I get the error message - "unable to create the temporary file. It's very frustrating because it goes through the procedure of full download and then does it all at the end!  Help, please... I have run Norton 360 on the computer.

  Hey,.

  Same mistake - http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/cad374f2-7da2-448b-bd92-23154763b9ec

  As suggested, you must post in http://www.zylom.com

  Dana

  Girls. You never know what they think.

• The remote access connection manager could not start. Error 2: cannot find the specified file.

  I've updated from vista to the most recent update.

  I have windows vista Home premium 32-bit.
  I want to get this matter resolved without having to reinstall as I have a few games installed it on this system.
  The modem is not the issue as other computers connect very well.
  Thanks for the help from Microsoft.
  Recently, I tried to connect to the internet but that was not possible, because no connection could be established. The remote access connection manager does not start 2 error: could not find the specified domain. the RasMan-dependent services are started, but Manager logins remote does not start.

  Hi Mundilfar,

  You can try the folliwng steps and see if it helps.

  Step 1:

  You can try to scan the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2:

  If you are always faced with the question, then you can try to give permission for the Rasman registry key and see if it helps.

  Important: The following steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

  a. Click Start, type regedit in the search box and press ENTER.

  b. Locate the following subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan

  c. right click on the key and click Permissions.

  d. Select Advanced, click on owner tab, click your user name, and check the 'Replace owner of subcontainers and objects', click Apply - click OK.

  e. click the user or group name that you want to work with.

  f. check allow total control. Click apply and then click OK.

  g. restart the computer and check.

  Hope this information is useful.

• Cannot copy the driver files in the folder of the Windows driver

  Title: windows 7 drivers
  Hello

  I am trying to copy a driver file in the folder of the windows driver, when I get the message so I pantyhose administration required and when I OK this file does not copy, even if I am logged in as an administrator and in the properties of the folder admin log also scored as the owner.
  I am trying to install a virtual CD-ROM, which is a Microsoft product.
  Can anyone suggest a way around that?
  Thank you

  See if that solves your problem to get a virtual CD-ROM in Windows 7...

  http://www.pctips3000.com/how-to-enable-virtual-CDDVD-ROM-drive-in-Windows-7/

• "Se error message" cannot find the < required > file in the < place > during Internet download

  Original title: I'm not able to save my downloads of web due to change in a techniical framework. What should I do?

  the message that I get while opening the download is described as under .pls try n help as soon as possible cos all my work is on hold.

  
  
  
  
  Cannot find the file in the
  
  
  
  
  
  

  Hello

  1. which browser is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps mentioned below, if Internet Explorer is installed on the computer.

  a: Open Internet Explorer.

  b: click on Tools > Internet Options.

  c: Then click on the Security tab.

  d: then click on the custom level button.

  e: Now navigate to the downloads section.

  f: Then select Activate for the download file option.

  g: then click on ok > apply > ok.

  Hope this information helps.