Error 'setup.exe has stopped working' when installing Quicken.
Original title: setup.exe has stopped working
I have read through the related forums and don't think I've seen a solid answer to this problem. I'm trying to reinstall Quicken on my Dell Inspiron 530 Vista with service pack 2. (Long and ugly tells how he got deleted at first - thank you, Intuit).
When I try to install Quicken, I get the above error message. I tried the clean boot solution; I tried to enter the installation and execution of the exe directly from there; I tried to do a right click to open/run as administrator... etc.
I have NOT run BigFix.com or other third-party software to solve this problem - I'm very comfortable with another piece of software download and throw into the equation. What is a corrupted registry and I have TO run third to fix? Is it a bug of Vista - is there a fix of bug for her?
I really don't like that to 'guilty' at this point, I just want to repair and recover my electronic payments! Help, please!
Hey, Keenon,.
Please, remove all existing components of Quicken from the computer and do a fresh install.
Step 1: use QcleanUI uninstall Quicken
Follow the instructions in the article below for more information on how to use this tool.
The use of QcleanUI to uninstall Quicken
Step 2: Install Quicken
Refer to this article for installation help.
Installation of Quicken on Microsoft Windows 7 or Vista
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Development in error "Installer.exe has stopped working" while installing the new modem. I try to install the ZTE AC8710 modem on my 32-bit windows vista (home edition) system, but whenever the facility is subject to the full I get the error 'Installer.exe has stopped working' and complete Setup doen't. The same error is hit when I try to uninstall the ZTE modem that is installed intestinal. The installation file has CD/install drivers for windows vista. Information below is displayed in the application event viewer for this error log. Help, please
Log name: Application
Source: Application error
Date: 2010-01-03 02:04:50
Event ID: 1000
Task category: (100)
Level: error
Keywords: Classic
User: n/a
Computer: Monica-PC
Description:
Application Installer.exe, version 0.0.0.0, time stamp 0x4b208462, Installer.exe module, version 0.0.0.0, time stamp 0x4b208462, exception code 0 x 40000015, offset error 0x0002efec, 0xadc process id, failed failed application start 0x01cab8b5797299e1.
The event XML:
1000 2 100 0 x 80000000000000 309 Application Monica-PC Installer.exe
0.0.0.0
4b 208462
Installer.exe
0.0.0.0
4b 208462
40000015
0002efec
ADC
01cab8b5797299e1
Hi Tonio saini,.
Navigate to the location of the programs .exe file and right click on the .exe file, and then select run as administrator to install the modem.
You can also check the following link, try the suggestions and check if that helps:
http://social.answers.Microsoft.com/forums/en/w7hardware/thread/4ce21286-3a77-4A06-923c-889d657f8e33
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?
Hi - are you getting it at the beginning of installation, during or after 100% progression ended?
Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?
This can be caused by the NVIDIA chipset driver:
https://decibel.NI.com/content/message/46299?TSTART=-130
Thank you
Sacha -
Error: "Setup.exe has stopped working".
Trying to open a downloaded file that updates a driver Lexmark (Z600), the process ends quickly with the dialog box stating that "Setup.exe has stopped working. Windows Explorer needs to close".
You can try a right-click on the setup.exe > run as admin.
Or repost in the following Forum:
It comes with Vista, upgrade install and activate Forum.
http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads
They will help you with your question Driver Vista Hardware and drivers Forum above.
See you soon.
Mick Murphy - Microsoft partner
-
Uninstall Napster - error saying setup.exe has stopped working
Try to uninstall Napster found on my computer, but get the error message saying setup.exe has stopped working. Please help get rid of Napster!
Hello
Follow the steps in the link given below and check if that helps.
http://support.Microsoft.com/kb/2438651
If the steps above did not help, I suggest you to install the program and then try to reinstall and check if that helps.
Hope it will be useful.
-
Setup.exe has stopped working, try to install Allods Online, the new MMO
I'm having a problem with my setup.exe Allods... I can't seem to run. It is said that setup.exe has stopped working
a problem causing the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
I tried to change the compatibility settings, I tried to run as administrator (Yes it's Vista! surprise...) and I tried the Msconfig.exe to fix.
I'm desperate... It's the signature of the problem below. Signature of the problem
Problem event name: APPCRASH
Application name: setup.exe_unknown
Application version: 0.0.0.0
Application timestamp: 4a2ae2a2
Fault Module name: RichEd20.dll
Fault Module Version: 5.31.23.1228
Timestamp of Module error: 4791 has 775
Exception code: c0000005
Exception offset: 0001e469
OS version: 6.0.6001.2.1.0.768.2
Locale ID: 1033
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f87834160Additional information about the problem
Bucket ID: 1718522889Please just ask for more information.
Check it again. http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx
Windows Vista Compatibility Center
First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
If this is not Vista compatible, read the info on the link above.
It works for some programs, but not all.This applies to software programs, NOT hardware drivers.
If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe
Run as Admin
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above does not fix it:
It comes with Vista, upgrade install and activate Forum.
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads
They will help you with your question in Forum Vista programs at the above address.
See you soon.
Mick Murphy - Microsoft partner
-
I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working
Hello
· Faced with this problem specific to uninstalling the application with the printer, or with another application?
· What is the brand and model of the printer?
You can follow the method below and check if it helps.
Method 1:
I would say as you put your computer in a clean boot state and check if it works.
How to troubleshoot a problem by performing a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.
Method 2:
I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.
http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program
Hope this helps,
-
Setup.exe has stopped working
Hello, I am trying to install a driver for a "Turtle beach II Micro" usb sound card. Whenever I try to open the .exe file, I get the following:Setup.exe has stopped working
A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
I deleted and redownloaded the file exe, rebooted, ran sfc and for the purposes of troubleshooting, I put this card its usb on another computer in Windows 7 (bridge) and the .exe charges very well, my Dell gives me this problem. Both are Win 7 Home PremiumAny help or advice would be appreciatedThank youHello Lousyshot,
On the computer Dell, right click on the file setup.exe to the Turtle Beach Micro II and select 'run as administrator '.
Does make a difference? You are using an administrator account when you try to install the sound card? »Did you check Event Viewer to see if there are errors on the installation failure?
Please answer back with an update and let us know if it helps.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Satellite Pro U400 - TrueSuite Manager setup.exe has stopped working
I have a Satellite Pro U400 running Vista Business (OEM) and at the start of a desktop computer TrueSuite Manager pop-up message appears telling me there is an update to install.
When I try to install the update, I get a window that says Setup.exe does not work.
Signature of the problem of the relationship an APPCRASH-is30C0.exe with the exception C0000005 code.
I tried to uninstall the TrueSuite Manager through Windows uninstaller programs, but get the same message - setup.exe has stopped working.
Appreciate advice on how to solve this problem.
Hello
I think that it is a simple case of corrupted registry entries and files that could belong to the TrueSuite Manager software.
I agree with the previous user, and I recommend to reinstall this software again.
You may need to clean the OS before installing the Truesuite again.
In this case, I recommend the CCLenaer. It s a simple and free tool and can be downloaded on most Web sites.Google and you should find more information.
See you soon
Jayjay -
WRT400N setup.exe has stopped working
I just got a HP Pavillion desktop computer new with Vista 64 and I have problems installing. Whenever I put the installation disc in the drive it does not load and I get an error message telling me that setup.exe has stopped working and will be forced to close. I even tried to jump the autorun and will my CD-ROM drive and manually select the file setup.exe. The initial splash screen appears and says please wait loading but I never have any more than that because the program crashes. I thought that maybe the drive was defective, but I tried it on a XP desktop and an XP netbook and the disk works fine on both. What gives? I searched this whole Forum and it seems I am the only person with this problem. My new defective computer or is it the user
OK, so I finally understand for me. I did an exploring more of the disc and found a file named setup64.exe and TADAAAAA this file runs. But I still can't LELA to run but hey at least I have everything works now
-
I'm putting a game on my computer and repeat me setup.exe has stopped working
I'm loading Jewel quest games on my computer. Whenever I start a window appears which says setup.exe has stopped working - please help if anyone has any ideas to try
Hi shellyart,
· What is the exact error message?
· Have you made changes on the computer before this problem?
· What version of Jewel Quest you trying to install?
Follow these methods.
Method 1: Run the game as administrator.
Method 2: You can also try the game in compatibility mode and check if it works very well.
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.
For reference:
Quest http://www.Microsoft.com/Windows/Compatibility/Windows-Vista/Search.aspx?type=Software&s=Jewel
http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs
-
Error: regedit.exe has stopped working
I had to reload my OS I had problems, now when I try to load the printer (I tried 2) it comes up with 2 errors - Regedit.exe has stopped working and the communication of the printer does not work.
If I type regedit in the search menu and then click on the file that displays the error next poster: THE APPLICATION FAILED TO INITIALIZE PROPERLY (0XC000007B). CLICK OK TO CLOSE THE APPLICATION. The software of the printer seems to be there, but nothing will print. Can you please tell what can I do to fix this?
If this is the case:
It comes with Vista, upgrade install and activate Forum.
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads
They will help you with your question in Forum Vista programs at the above address.
See you soon.
Mick Murphy - Microsoft partner
-
Satellite A300D - upgrade Vista - "Setup.exe has stopped working".
Hello
I use Satellite A300D with Vista and I tried to upgrade to Windows 7 using Toshiba upgrader.
After the language selection and proceed to the other steps, it asks me to uninstall a bunch of programs. Some are uninstalled very well, but when it comes to four other programs he says "Setup.exe has stopped working" and it does not uninstall.
I tried to uninstall the manually, but I got the same message.
These programs are;
Setup driver Atheros
Toshiba hardware configuration
Toshiba supervisor password
Realtek High Definition Audio DriverSo I can't go ahead with the upgrade.
Anyone know what could be the problem?
Thanks in advance,
Pouvez - TR
.Hello
Anyboday tried to run the upgrade as an administrator? Therefore, click on the setup.exe file on the upgrade disc and run it as an administrator.
Moreover I also upgraded from Vista to Windows 7, but in the manual supplied with the notebook, I founded the information, that it s to start the upgrade directly after a new installation of recovery.
If you did a recovery facility before the upgrade?
Welcome them
-
message error "clc.exe has stopped working".
When I run Photoshop I get a message error "clc.exe has stopped working". I have the latest version of the drivers for my Acer X23H and HP 2311 LCD monitors so their upgrade is not possible. Is there another difficulty, that I can try?
For a temporary solution, you can disable opencl.
Preferences > performance > the GPU settings > advanced settings > Opencl - uncheck opencl.
-
I have a Gateway laptop with Windows Vista. I put Norton anti-virus on it last year. Now I am trying to run the new disk of Norton and the computer tells me that setup.exe has stopped working and I can't run the program. Norton 2008 has been removed.
http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039
Download/run their abovelink Norton Uninstall tool to ensure that all "Norton" is deleted.
Then, right-click on the setup.exe Norton > run as admin.
If the above does not help:
http://www.Symantec.com/en/AU/Norton/support/index.jsp
Contact the Norton Support for problems with their software.
See you soon. Mick Murphy - Microsoft partner
Maybe you are looking for
-
You continue to add hundreds of bookmarks on my toolbar.
My bookmarks toolbar continue to create hundreds of entries by repeating addresses I already entered. I remove and they will be created again. How can I stop this?
-
Can no longer access the connect you on THIS computer
I can acess my router from all my other except machines to it. This is the machine that I use all the time and I was able to access my router before. He just suddenly stopped being able to access the connection. He not even me to use engineering to a
-
Hello! Is there someone else who has already developed application for storing 3D (used Ranger Toolkit for Labview?)
-
How can I change the projects of mswmm on mac?
I need to be able to edit this file on my laptop at home (mac), but I don't seem to work. Please help me!
-
Hello possible assistance... My Dell XPS M1210 has not worked well since I got in the fall of 2007. Crashed like crazy with code 7F blue screen all the time. Last week, it got to the point where the operating system must be reinstalled. Now I am unab