Error: _ "Sidebar.exe - bad image"__windows/system32/sfc.dll is not designed to run on windows or it contains and error. " Try to install the program by using the original installation media or contact your system administrator. __

Similar Questions

• Error message: windows\system32\difxapi32.dll isn't is either not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for

  Hello

  I keep getting error messages when I use the computer. It started two days after you download an update from Windows. A sample of the error is:

  C:\windows\system32\difxapi32.dll is not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  I use a vista. I don't know how to solve this problem, many want to help.

  Thank you.

  Hi Colinthebrave:

  Start with this little tool to help get rid of the error, once your system is stable again and then try to run your updates again.

  Thank you for your message; Let us know how it goes.

  o

  o The System Restore tool

  If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose another restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Don
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• C:\Windows\System32\wship6.dll is not designed to run on Windows or it contains an error.

  I can't open windows live mail and other programs that also many installers will not work for this reason.

  I get the following error:

  wlmail.exe - incorrect Image

  C:\Windows\System32\wship6.dll is not designed to run on
  Windows or it contains an error. Try to install the program using the
  the original installation media or contact your system administrator or
  the Publisher of the software to support

  I had to click OK 4 or 5 times to make it go away

  Many installers will not work because of this.

  System information:

  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  Processor: AMD A6 - 3400 M APU with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
  Number of processors: 4
  RAM: Mb 5610
  Graphics card: AMD Radeon (TM) HD 6520 G, 512 MB
  Hard disks: C: Total - Mo 595354, Free - Mo 401604; Total D: - 14820 MB, free - 1647 MB; F: total - 99 MB, free - 89 MB; G: total - Mo 953867, Free - 877240 MB;
  Motherboard: Hewlett-Packard, 358B
  Antivirus: Norton Internet Security, updated and activated

  Here's what I did to remedy:

  I had to replace the \wship6.dll c:\windows\sysWOW64 file not the file c:\windows\system32\wship6.dll

  I had to start Windows Recovery Environment, load the command prompt and replace the file c:\windows\sysWOW64\wship6.dll to a system of work w7 (I used an iso oem and 7zip)

  ( 1 copy the file in a place should be on my boot drive (c :) in my case))

  2 . restart your computer , press and hold F8 as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you will need to start over; to do this, hold the Windows logon prompt appears, and then stop and restart your computer.

  3 . Select repair your computer and press enter.

  4 . Select the option for command line

  type 5 bcdedit | find "osdevice" (note that there is a space after bcdedit and | and also find) that will tell you what drive letter to use to access your startup drive (d: in my case)

  type 6 the drive letter followed by a: (d: in my case) and press enter , the guest must pass to < DriveLetter >: (in my case d:)

  type 7 copy < your place should be > wship6.dll windows\syswow64\wship.dll (replace < your place should be > with the full path to where you place the file) (note the space between the .dll and windows)

  If this does not work, you may need to replace syswow64 system32 in all the above instructions

• C:\windows\system32\mshtml.dll is not designed to run on Windows or it contains an error.

  original title: C:\windows\system32\mshtml.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or the provider of software for pension

  The battery died and when I restarted my computer I started having this error message last week whenever I start my computer. Explorer opens but doesn't load properly, not usable.  Service pack 2 is installed when the first available.
  C:\windows\system32\mshtml.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or the provider of software for support
  I tried MS fixit but nothing helped.  Need help.

  Chances are that you see the effects of ongoing hijackware infection!

  • My infected computer - what should I do now?
    https://forums.Malwarebytes.org/index.php?showtopic=9573
  • Help: I got hacked. Now what should I do?
    http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

• C:\Windows\System32\D3D10Level9.dll is not designed to run on Windows or it contains an error when it tried to update to windows live messenger

  Original title: installing windows live messenger update revealed a .dll file bad, maybe direct3d related.

  I am running windows Vista professional, service pack 2. I just updated windows live essentials, specifically the Messenger and have since lost feature program.

  The launch of the program, I get an error message saying:

  "
  Msnmsgr.exe - bad Image

  C:\Windows\System32\D3D10Level9.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.
  "

  subsequently I do not have much in graphical material in the e-mail program, insofar as a chat window is empty (but I can still type messages and send them, without being able to see, or no response). I don't see this problem in any other program, but perhaps no other programs try to use graphics in this way. In principle, I could downgrade windows live Messenger back to what it was, but that seems more to avoid the problem rather than solve them.

  I had a quick glance in the D3D10Level9.dll file, in the system32 folder: it has no size and is apparently empty. Conclude that this file is just broken and needs to be replaced?

  An internet search indicates that this file is described as "Direct3D 10 to Direct3D9 translation Runtime". I was wondering if it was a directx problem, so tried to reinstall that. It did not work.

  It seems to me that I need a replacement for this particular dll file that actually works, but I'm incredibly careful to find a replacement and the "tips" on how to mess with some arbitrary site system files.

  Could someone offer any advice on how I should proceed with this? What danger is there to find me a replacement dll file, change the privileges of the corrupted file, so I can replace it and make the switch? It would be the right thing to do? My analysis of the situation is correct? Could it be solved with a relocation of a program?

  Thank you very much

  Uninstalling and reinstalling the update of windows for a year that has put the file d3d10level9.dll on the computer, the problem has been resolved.

• "Winword.EXE - bad image" "C:\Windows\system32\bitsprx532.dll is not designed to run on Windows or it contains an error. Try the program mode.

  Original title: 'Bad image 32 system error'

  Error window opens "Winword.EXE - bad image", "C:\Windows\system32\bitsprx532.dll is not designed to run on Windows or it contains an error. Try fashion program at new etc. etc."

  This happens at startup when programs open ie. audio and whenever I try to open a program, in this case MS Word. I click the OK button several times and he goes and allows me to work in the program.

  It seems that the C:\Windows\system32\bitsprx532.dll file is related to malware.  Examine for example the Uploader on VirusTotal.com and checking the results provided here.

  Scan your system with the free version of MalwareBytes AntiMalwareand see what it finds.

  Check with Sysinternals Autoruns for entry autostart referencing bitsprx532.dll and validate its location (in the autostart list).

• The bad image error. C:\Windows\system32\cfgmgr32.dll is not designed to run on windows or it contains an error.

  Whenever I try to install the material using a USB port, I get an error from the bad image. It is said:
  C:\Windows\system32\cfgmgr32.dll is not designed to run on windows or it contains an error.

  Any help will be useful.

  Thank you
  Jeff F.

  Hi Jfog18

   

  1. what material are you trying to install?

  2 have you installed for the device that you connect software?

  3. were you able to connect the hardware device much earlier?

  
  Method 1:

  You can analyze your computer using online for computer viruses antivirus scan. Rerailway to the link below to complete the virus scan online. Check if this help -
  http://OneCare.live.com/site/en-us/default.htm

   

  Method 2:

  You can perform a SFC scan and check if the problem is resolved.
  To Perform a Scan SFC -
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on Allow.
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Bad Image C:\windows\system32\WTSAPI32.dll is not designed to run on Windows or it contains an error

  Hey,.
  Everytime I open an application I get the following message
  C:\windows\system32\WTSAPI32.dll is not designed to run on Windows or it contains an error
  The program of all the work after clicking on ok
  This has happened since my last update automatic
  Im running a fairly new HP with vista home premium 64-bit
  This is not the first time that this happens and im HD crashed a few weeks ago.
  So basically, it is a clean installation, a few weeks ago.
  IM thinking it is a 64 bit to 32 bit problem accentuated by the updates but I ng3epa have no idea
  Help

  Hi, cdg59!

  It seems that your system is damaged.

  You might want to try the suggestions in this post: http://linenbach.com/tiki/tiki-view_blog_post.php?find=&blogId=1&offset=60&sort_mode=created_desc&postId=465 that talks about how to solve problems with wtsapi32.dllprecisely.

  Alternatively, you can look over The system in Vista Recovery Options (http://windowshelp.microsoft.com/Windows/en-US/Help/2b3724d1-f4ad-5b26-16dc-3e9e66f4be5e1033.mspx), specifically Startup Repair (http://windowshelp.microsoft.com/Windows/en-US/Help/5c59f8c1-b0d1-4f1a-af55-74f3922f3f351033.mspx).

  Please, let us know if this solves your problem or you need assistance!

• Error MESSAGE "C:\Windows\SYSTEM32\WindowsCodes.dll is not designed to run on Windows or it contains an error."

  C:\Windows\SYSTEM32\WindowsCodes.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system or software support provider administrator.

  How can I solve this problem
  Comments will be appretiated
  Guillaume Ramond

  Original title: error MESSAGE

  Hello William,.

  1. when exactly you receive this error message?

  2 did you do changes on the computer before the show?

  3. you are trying to install or run a program in this error message?

  This could be caused due to damaged DLL files.

  I suggest you to perform system File Check to fix the corrupted system files, and then check how it works.

  See the link "How to use the file system tool Checker to troubleshoot system missing or damaged files on Windows Vista or Windows 7" to run the System File Check.

  Note: It can ask the Windows DVD difficulty and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.

  Try this and respond with more information about you to provide the best solution.

• Error message "c:\windows\system32\atiumdag.dll is not designed to run on windows or it contains an error" appears randomly

  Original title:

  The title above guard poop upward on my screen, I don't know what to do about it. in the box it says also "c:\windows\system32\atiumdag.dll is not designed to run on windows or it contains an error. Try to install the program by using the original installation medi or contact your system admisistrator or the provider of software for support. .... BUT I do not understand what is the program and everything I try to repair by ATI shows nothing abnormal. HELPPPPPP!

  Hello Deborah,.

  I suggest you perform a System File Checker analyzes your computer and check for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• 'C:\Windows\System32\winrnr.dll is not designed to run on windows or it contains an error' whenever I turn on my computer

  Hello

  My computer was freezing whenever I turned it on in normal mode. It is also frozen when I turned it on in SafeMode with network. After that, he would not be able to start up. At one point, I was able to boot into safe mode and do a system recovery to an earlier point in time that I tried it and it worked. I am now able to boot into normal mode. But whenever I start my computer, I get this error message:

  "C:\Windows\System32\winrnr.dll is not designed to run on windows or it contains an error...". »

  I want to assure you that I can solve this problem. Can you help me? Is this a Vista problem? This would resolve if I installed Windows 7. I was already thinking to do this...

  Thank you!

  Replace damaged files by your Vista DVD files:

  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• C:\windows\system32\MFC42u.dll is not designed to run on Windows or it contains an error, open MSCONFIG, MMC or paint

  Originl title: MFC42u.dll

  I have a situation where when I try to access MSCONFIG, MMC, or all things, paint on my box of Win7 it's return to launch that "C:\windows\system32\MFC42u.dll is not designed to run on Windows or it contains an error.  I tried SFC to correct this, and he says he can't.  Short of a relocation, does anyone have an idea as to what I could do to fix this?

  I did further research and found an article about this problem with an update of safety with an associated fix.  When I get a second I'll post the article.

• c:\Windows\System32\dbghelp32.dll is not designed to run on Windows or it contains an error. Try to install the program using the original media, or contact your system administrator or the provider of software for support.

  This shows up every time I open a program and when windows starts up.

  Hello kdubu722,

  Try to start your system in safe mode:

  Restart your computer if it is running. Press and hold the F8 key for 3 seconds after your computer powers initially on. Once you see the Advanced Boot Options menu (or beep) you can stop. Up/down arrow keys to highlight your selection. Select Mode safe mode with networking and press ENTER. You should see drivers loading, it may take a few moments. You should then be at the Welcome screen. Connect to your computer using an account with administrator privileges. Now, you download (free) MalwareBytes from here: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html?tag=mncol install, Update then do a scan of your system in safe mode, to ensure that it is indeed clean! Once the scan done remove anything it finds. Simply restart your PC to see if your problem has been resolved!

  If your system is clean, then run this analysis of Auditor system in SafeMode below files:

  1. click on Start, click principally made programs, Accessories, right-click on command promptand select run as administrator.

  2. click on continue or provide credentials admin if prompted.

  3. in the command prompt window type the following, sfc/scannow (yes he's a space after sfc), and then press ENTER. This analysis may take some time to complete.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• c:\windows\system32\winscard.dll is not designed to run on windows or it contains an error.

  Every time I restarted, the above message appears. Currently the mouse and printer works is not on this computer. I tried a software to analyze and solve problems, but I still have the same problem. Also, I tried to reinstall Vista, but it was not successful, it says there is a problem it seams not to understand.

  Hello
   
  1. have you made recent changes on the computer before the issue started?
  2. what program did you use to analyze and solve the problem?
  3. what error message when you tried to install Vista?
  4. are you able to connect to the computer and boot to the desktop with success?
   
  This happens usually if a system file is missing or damaged. If you are able to log onto the computer successfully, try the next step.
   
  Step 1: Sfc scanner to fix missing or corrupt system files.
  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. type the following command and press ENTER: sfc/scannow
   
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  For more information, please visit this link: http://support.microsoft.com/kb/929833
   
  There are other troubleshooting steps that we can do to solve this problem, please try the step above and post back with the results, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• C:\windows\system32\dsound.dll is not designed to run on windows or it contains an error.

  I get this error in the 4 or 5 days notice.  I can't open games, video playback and I could not download pictures from an SD card after a video was found on the map.  Help please!

  When I downloaded the file dsound.dll before the entry of a laptop with Windows 7.  It does not work.  Today, I realized that we had another laptop that runs Vista.  I copied the file dsound.dll of this machine to a flash drive, copied and then on my laptop and deleted the file of Windows 7.  All works now.  It seems that when the file is replaced, it must be the same operating system.