Error signature: "could not find the signature key file: author.p12.

Similar Questions

• I installed Windows 7 not genuine, I need to activate it, but I could not find the product key

  * Original title: product key

  I installed Windows 7 not genuine, I need to activate it, but I could not find the product key. Could someone guide me please.

  If you can't find the product key, you will need to buy a new one:

  You can find software OEM System Builder of dozens of online merchants. The current price for OEM Windows 7 Professional Newegg, for example, is $ 140. When I checked a few minutes ago, Amazon offered packages OEM Windows 7 Professional from several vendors at prices ranging from $ 101 to $ 150. When I checked earlier, a package specifically designed for reconditioned PCs cost only $ 50 for a 64-bit copy.

  There is no technical limitation to prevent you from using OEM software on your computer, although this software only works for a clean install, not an upgrade. In the past, Microsoft has been remarkably inconsistent in his advice to clients on the question of whether this practice is allowed. (See "is allowed to use Windows OEM on your own PC? Don't ask Microsoft. »)

• Cannot sign the application - cannot find the signature key file: author.p12

  Hi all.

  I have seen this error on several messages in the forum, but none of the suggested corrections works for me.

  I am signing my App BB10 ready to be distributed. It draws very well and I also installed the two relevant files of the LSB and followed the registration procedure. The author.p12 and other files exist in %HOMEPATH%\AppData\Local\Research In Motion

  However, when I try to run the following commands, it fails. I also tried to use the graphical help of BlackBerry Tablet OS and I get the same error.

  The only thing I noticed is if I run: echo %homepath%, the result is:------. I can't change what I am on Windows 7 on an Active Directory domain and any changes made to these environment variables does not stick.

  Is there a way to specify the path to the author.p12 file? Help, please! The output is below:

  C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7>bbwp C:\Proj\App\Deployment\BlackBerry\build\MyApp.zip -g (password) -b 1 -o C:\Proj\Resources\CodeSigning\BlackBerry\BB10
  
  C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7>"C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7\third_party\node\windows\node.exe" "C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7\lib\bbwp.js" C:\Proj\App\Deployment\BlackBerry\build\MyApp.zip -g (password) -b 1 -o C:\Proj\Resources\CodeSigning\BlackBerry\BB10
  
  [BUILD]   Populating application source
  [BUILD]   Parsing config.xml
  [ERROR]   Cannot sign application - failed to find signing key file: author.p12
  

  Thank you.

  Jon

  I corrected myself. I realized all I had to do was to create a local user (no AD) on my machine, copy RIM folder my HOMEPATH to HOMEPATH to the local user, then run cmd.exe as the local user and sign the binary file. Worked fine!

• Error: Windows could not find the username, when residential group folder sharing.

  Original title: Windows could not find the user name

  I use Window 7 Ultimate and have set up a homegroup. In Windows Explorer, I select a folder and choose share with. I have in the file sharing dialog box, select a user name (I checked that it is a valid user), and then click Add. I get the message "Windows could not find . I can't find a reference anywhere on the web for this problem. I'm the first one to see it?

  Hi David,

  For any question of shared folders in the homegroup, run the resolution of the problems of shared folders to automatically find and fix some common problems.

  Follow these steps to run the troubleshooter.

  a. Click Start, type troubleshooting and press ENTER.

  b. click on show all the link in the left panel.

  c. click on Shared Folders to run the troubleshooter.

  Also have a look if you have file sharing set up properly.

  For more information, you can consult the following articles.

  File sharing essentials

  Share files with anyone

• Error: Could not find the locale data files. Please reinstall when you try to open Facebook.

  Original title: locale data file errors... How can I fix it?

  can't the facebook home page and when I search the

  "Cannot find the locale data files. Please reinstall"pop box.

  Hi kjkin,

  1 did you change on your computer before this problem?

  2 are you able to access other Web sites correctly?

  3. what browser do you use?

  If you are using Internet Explorer, follow these methods & check if the problem persists:

  
  Method 1

  You can follow this link & check if the problem occurs:

  Can't access some Web sites in Internet Explorer

  
  Method 2

  You can also follow this link:

  How to delete the contents of the temporary Internet files folder?

  
  Reference: Internet Explorer does not start or stops responding

  Hope the helps of information.

• Animate edge could not find the associated html file

  Hey everybody,

  I've done several projects using edge animate 1.0, each of them worked perfectly. But now I need to make some changes, and several of them display an error saying that couldn't find the html file associated with the project, even if the file is just in the same folder. I opened the .a file in a text editor and checked the HTMLFileName attribute points to the correct file. I've attached a screenshot of the error.

  If anyone has an idea of what is the cause and how to fix it, it would be greatly appreciated, as I didn't have a chance in what I tried to do and need to edit these files as soon as possible.

  Thanks in advance!

  

  Hey again, have you tried to simply open the .html (not the .a file) file to animate? EA reads data from the JS so that give a whirl.

  Sarah

• Error 624: Could not update the phone book file

  Dear Sir/Madam.

   
  I have a DELL laptop. Tag No.is 922W1BS.i are facing a problem in the laptop. because I can not connect my internet Reliance by USB DATA CARD (MODEM). When I connect the model I get error ffolowing 624 error: cannot update the phone book file please help me

  Hello

  I suggest to refer to the procedure described in the link below and check if it helps to resolve the issue.

  http://support.Microsoft.com/kb/934588

• Try to install the Windows Media Player plug-in and receive an error message "could not find the environment Option that was entered? How can I fix it?

  I can't watch the video of MSN homepage.  The Device Manager in the Control Panel also gives me same error message.  Any help would be appreciated.

  Hi bears Beltran.

  1. what browser do you use for viewing?
  2. What plugin you are trying to install?

  Method 1
  I suggest you to run the fixit from the following link:

  Fix Windows Media Player video and other media or http://support.microsoft.com/mats/windows_media_player_diagnostic/ question library
  Method 2
  I suggest you to scan SFC. Scan SFC will replace missing or damaged files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3
  I suggest you try the steps from the following link:

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651#reso3

  Method 4
  I suggest you try the steps from the following link:

  The video problems when you use Internet Explorer
  http://support.Microsoft.com/kb/2532294

  Additional information:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

• Impossible to install XP SP3 (could not find the file specified)

  I looked at and followed the steps described in

  Article ID: 950717 - steps to take before you install Windows XP Service Pack 3
   
  I do not have

  • Microsoft Shared Computer Toolkit
  • Pack MUI Remote Desktop Connection (RDP) 6.0 (update 925877 for Windows XP)

  I tried to install SP3 with and without my Antivirus, Antispyware and firewall running programs (several times – 4, 5, or more).  Each time, I get an error staing "could not find the specified file."  Then after being told that SP3 can not be installed and that "Windows XP has been partially updated and may not work properly", I have to restart my system.

  I also followed all the steps in this article (Article ID: 950718 - how to troubleshoot an installation fails in Windows XP Service Pack 3) and still the same thing as above.

   

  I tried to download SP3 directly from the Download Center - same results as before.

   

  I started the BITS service and tried again - same results as above.

   

  I've disabled auto updates and removed to software distribution (download renamed folder as shown) - same results as shown above.

   

  I tried to restore my system to an earlier date - 4 these attempts using different dates and set points during the last wee - ALL have failed.

  I also tried the proposals 1 to 3 in this article (Article ID: 950249-how to remove Windows XP Service Pack 3 from your computer), and none of these steps worked.

  I spent over 8 hours today and yesterday a couple just trying to solve this problem and still don't get anywhere.  I am beyond frustrated at this point.  I know that say Windows can not work properly, and I need my computer to do my job.  Any help would be appreciated.

  You could do a repair installation with a CD of Windows XP with SP3 integrated already.  However, unless this is a new installation that you have installed SP2 on so you could get then SP3 installed on it - you have obviously been broadcast for some time without a lot of fixed security and tastes and your system could very well be stripped because of this.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 11 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you need to do before you install Windows XP SP3:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  Come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.

  Once the computer has been put by the top meat grinder (do it all, like data. even if you JUST did some of them) - download you ' HE Installer "SP3, save it to your desktop, restart and login as an administrator and run this file, following the signs.

• Error code 28: could not find the drivers. Windows 7 64 bit could not find the drivers for my Seagate Expansion Portable Drive. The same system works for another 32-bit version of windows 7.

  Hi, I would be grateful for help on this, I bought a new seagate expansion external hard drive not too long ago (abt 3 months old) and tried to use the device only recently (to back up my files). Windows has detected the drive but says that it could not find the drivers. (code 28)

  When I tried the drive on a 32-bit computer, it showed up working find and dandy. When it is plugged in the computer of the alien-ware, same error.
  Tried the uninstall from Device Manager and restart the computer, still the same error.
  Services.msc open and found windows install offshore. He turned on automatic, but the same error came out. Plug and play Windows was already working.
  Checked Windows SP1 worked, still the same error.
  He got me completely baffled.
  Before this, I had other problems with USB and disabled driver signature Verifier (I think that's what it was called) before you boot into windows. Worked very well for my flash drives each time that I did.
  I also had another external HARD drive which was held only 160G and it worked, so I'm not sure what the problem is with this particular external hard drive.
  Please help, I'm going crazy on this problem...

  The specifications of my devices are as follows:

  Computer

  Model:

  Alienware M14x

  Type of system:

  64-bit operating system

  Hard drive model:

  Portable Seagate Expansion 1 TB drive

  Hello

  28 error code means that the device was not fully installed.

  Method 1: Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  To open the Troubleshoot utility equipment follow the given link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can update the drivers and check out them.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information.

  Install a USB device:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Hope this information helps.

• When I open my browser Google Chrome I get error "could not find the translation file:...\pivot.ini [WPCTRL95] does not work.

  Hello

  I have the same problem. The error message appears when I open my browser Google Chrome (Yes, only that browser). The full message is: could not find the file:...\pivot.ini translation [WPCTRL95] will not run.
  What kind of changes? As far as I know, I did not bring changes of lipids to my computer or programs. The thing is that I for a moment, and I don't recall the exact moment when it appeared.

  Hello

  Please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• At startup, getting the error - the system could not find the environment that was entered

  I have Windows Vista Home Premium and I have the OS on my hard drive with no CD. I get the following error message when I start my laptop on the desk. The system could not find the environment that was entered. What can I do to fix this?

  The only answer I found in Google:
  http://UK.answers.Yahoo.com/question/index?QID=20100411034348AAALd89

  Your laptop you happens to be a Sony Vaio? What model?

• Cannot start service on local computer print spooler. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Ould does not start on local print spooler service. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Hello

  I suggest you try to launch the fixit of this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  It will be useful.

• Error in Windows Mail - "error 623 - system could not find the directory entry for this connection".

  Original title: Windows Vista, Windows Mail, error 623, unable to connect to the mail.
  This problem occurred after a storm. Modem was fried.  Replaced the modem with the modem "2wire" ATT.

  Now get "error 623: the system could not find the directory entry for this connection"or the sys works very well. " Att think maybe in Vista?  Help, please. Works of g-mail, but I like Windows mail.

  Hello Bbuddes,

  You can watch the following information/tutorial to help with most of the problems of Windows Mail.
  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html

  There is a section to reset Windows Mail which can help with your problem.

  Sincerely,.

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• "Could not find the main class" Java error on Windows 7, but not Windows XP

  Hi all

  It's the first app I try to package and virtualize with ThinApp.

  It is an old business application that usually runs on Windows XP SP3 x 86.

  The. MSI that I generated with Thinapp works very well when it is installed on a Windows XP SP3 x 86.

  However, our main goal to use Thinapp is to install on a Windows 7 SP1 x 64.

  But in doing so, the application triggers a Java Virtual Machine Launcher error message saying: "could not find the main class. Program will exit. »

  I thought that it was because the app includes a 1.4.2 JVM and that my XP has not any JVM pre-installed, but the main image on my W7 has a 1.7 JVM. But even after I uninstalled the 1.7 and installed JVM 1.4.2 on the W7 machine, I kept getting the error message so I guess that it is not bound.

  Y at - it an option that I missed during my MSI generation so that it can run on a Windows 7 x 64?

  Thank you all for your help.

  D.

  With the help of Lachi, we found that the app natively works on W7, no need for ThinApp it if the goal is just to make it work on W7, from a XP world.

  The only change we had to make (and the error was the same ThinApp-ed, which is what I originally shared) is that the application should work with Windows 7 in "classic" mode "of the screen (without Aero and the menu start XP-style). This is because the application runs an old integrated version of Java (1.4) and it makes the system calls seeking specific .dll to display, which are not accessible by default if Aero is enabled.

  Closed topic