Error SSL Automation Tool

Similar Questions

• SSL Automation tool fails to assign new Certs

  Hey all,.

  I'm having a puzzling problem... Let me to you the basics of the road...

  I use 2 ESXi hosts on version 5.1.

  I installed vCenter on a virtual machine hosted on Windows server 2008 R2...

  I ran the method of simple installation using SQL 2008 express, the server is largely autonomous.

  VCenter, connected as [email protected], configured services successfully installed the connection so that domain administrator account and set this area as main.

  I am able to connect successfully as a domain administrator, but cannot configure vCenter server as it said that none was found, so I had to sign in again with the admin of vsphere and enable permissions on the server vCenter object domain admins.

  All good finally created my store of data, Cluster, and all added hosts fine...

  Now, I wanted to finally get to the point where I wanted to certifcates signed by our CA company, so I don't have to worry about the validity of the CERT whenever I connect.

  VMware KB: Deployment and using the certificate SSL 1.0.x automation tool

  After TONS of reading, I configured my Cert model in my company CA, arrived to form necessary must wait its SHA1 game and would recommend sha-256... but no matter, generate my req, get it signed, create a string of cert...

  Now I'm finally on the attribution of the cert to the service...  (note that this tool is installed directly on the server vCenter Server, c:\VMware dir)

  Press 3 (updated SSO)

  Press 1 (update the SSO Cert)

  Enter all the required fields as planned with the full paths to the directory...

  Then I get this! Error but below is extracted from the actual log file.

  2014-08 - 05T 12: 05:56.741 - 0500 [c.v.s.c.r.RunBuilder] race INFO: reg query HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc. \VMware Infrastructure\SSOServer / t REG_SZ /v InstallPath

  2014-08 - 05T 12: 05:56.909 - 0500 [c.v.s.c.r.RunBuilder] out of State INFORMATION: 1

  Now I open reg edit and navigate to that directory reg, but there is no such a key of 'InstallPath'... What I'm doing wrong!

  Hello, Zewwy.

  You should definitely use SSL Automation Tool 5.5 to your vCenter and its services (Web Client, inventory, etc...). On ESXi: I replaced the CERT of the host by my hands, and not by the tool.

  Also, be sure to use SHA256RSA algorithm. Here are the instructions for ESXi VMware KB: configuration CA signed certificates for ESXi hosts 5.x .

• SSL automation tool does not load advanced configurations

  Hi all

  I'm trying to upload a new SSL certificate on my server vCenter (Virtual Center 5.1 u1b). I have already asked the certificate, create all necessary files and I am trying to load on my environment.

  My vCenter server have the same name of the certificate, we use an alias to make easier the connection of the workstation to VDI environment.

  That's my problem, when I try to add the new certificate that I received the message below:

  [.] ERROR: The leaf certificate has not any CN or subjectAltName that match

  are the public address of the current computer. The rejection of the chain. To ignore this

  check, set the environment variable 'ssl_tool_no_cert_san_check' to 1.

  [.] ERROR: The supplied certificate string is not valid.

  
  

  Okay, I went to the config file and published. I activated the ssl_tool_no_cert_san_check with the variable 1 and restart the tool.

  
  

  Soon the automation tool starts, you receive the following message:

  
  F:\SSLAutomationTool1.0.1 > ssl - updater.bat

  'ssl_tool_no_cert_san_check' is not recognized as an internal or external command

  d, operable program or batch file.

  
  

  If the parameter I need is not loaded.

  Anyone know how I can fix this?

  Thank you

  Hello Frank, I am not owner of the process of certificate creation.

  The company I work ask Symantec Verizon certificates and each aditional WHAT DNS is charged. While only one name is added to the certificate.

  In relation to the question, I added the line in bold below on file ssl - updater.bat

  : updateVC_SSL

  Set ssl_tool_no_cert_san_check = 1

  call: echoAndLog ' services which are delivered to market as part of this operation are: VMware VirtualCenter Server, VMware vSphere and VMware VirtualCenter Management Web services oriented Storage Service profile. "

  call "%~dp0tools\read-params.bat" - vc

  call: validateCertificateChainFully ' % vc_cert_chain: '% =' "% vc_private_key: «= %»»»

  Thank you

• SSL Cert automation tool

  Hello

  I wanted to vSphere update 5.1 to 5.5 and had problems with the standard certificates. So I decided to stop and first to replace now. We will generate certificates by our internal CA and spread with the SSL Cert automation tool.

  Read a few KBs I have two questions before you start.

  1. may I do the modification of certificates in production period or do I have to put something in maintenance mode and so I have to do this weekend?

  2. While the tool is running, I'm able to choose what services I want to update. When I choose "8" all services are selected. It doesn't matter if do not have all of them running. For example, we do not have the Orchestrator, but I don't know if we Log Browser.

  Thanks in advance

  Wolfgang

  Hi Wolfgang,.

  (1) you will need downtime that services are restarted a couple of times, also don't forget to close all dependent solutions (VMs should not affect but that managing the components are affected).

  (2) log browser is embedded in the Web Client, so if you have that installed you also Log browser

• How can I fix the error SSL 61 (Linux OS)

  Whenever I try to connect to my customer's internal Web site light Linux OS I get the error SSL 61. Firefox is the only browser on the workstation. There is no connection problems of Non-Linux systems on any browser, including Firefox.

  Below error:
  SSL error
  Contact your Helpdesk with the following information:
  You chose not to approve "Go Daddy Secure
  Authority - G2 of certification', the issuer of the server
  security certificate (SSL 61 error).

  How can I fix this error? I tried to install the cert manually at the client.

  COR - el: this does not resolve the question for SHA1 certs.

  I added the certificate to the Citrix DB. I finally found the problem after researching on Citrix forums and other various sites.

  This question is the cert itself, we bought a cert and use SHA2, however the Citrix Receiver of Linux does not support at this stage the SHA2.

  So either the only resolution retype the cert to use SHA1 or wait for an update from Citrix.

  Thank you both for your time.

  c

• what I do with error SSL 61?

  I get the following error: error SSL 61: you hva not chosen to trust the server's secure high assurance COMODO CA, the issuer of the security of the server certificate

  Hello

  1. do you have Comodo Security software installed on the computer?

  2 is specific to the program the issue?

  3 did you last modified the software on the computer?

  If the problem is specific to Comodo then I suggest you to contact Comodo support at:

  http://www.Comodo.com/support/Comodo-support.php

• 14 Photoshop. I'm trying to merge (do a panorama) 2 photos.  The 'automation tools are grayed out', which means that I can not select this option.

  I just upgraded from photoshop 10 to 14. I'm trying to merge (do a panorama) 2 photos.  It was very fast and easy in Photoshop 10.  In photoshop 14 the 'automation tools are grayed out', which means that I can not select this option.  I do something wrong or my installation does not work?

  In the 14 PES Editor, adobe has moved the Photomerge features to guided.

  Photoshop elements help | What's new in Photoshop elements 14

  Photoshop elements help | Guided - mode Photomerge edits

• A general error occurred. Found dangling error SSL

  I get the following error message when you try to convert a Windows 2003 server with converter 5: a general error occurred. Found dangling error SSL.

  I read this article http://KB.VMware.com/selfservice/microsites/Search.do?Language=en_US & cmd = displayKC & externalId = 2002296 but to the Phisical DNS server is fine. It can solve all the names I've tried and hosts file that only contains the entry for localhost.

  Also, I can't find messages like these ones:

  [#18] [2011-06-29 10:50:34.904 04732 WARNING "App"] [, 0] [NFC ERROR] NfcNewAuthdConnectionEx: Could not connect pair. Error: Failed to search for host for server host.domain.abc address: no host is unknown
  [#18] [2011-06-29 10:50:34.904 04732 info "App"] [, 0] Error opening 2338 disc vpxa-nfc: / / [VMFS02]

  Any ideas of what I should do?

  The agent log:

  WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server 192.168.128.116:902

  your VC is not visible from the source machine.

• Error creating connection tool instance. ODDC

  Oracle distributed Document Capture installed on the server, everything seems fine, but what connection I get the following error
  
  Error creating connection tool instance. [ActiveX component cannot create object]
  
  ODDC vercion is 10g
  It will install on Server 2008 R2 64-bit

  You are using version ODDC: 10.1.3.5.1? From this version, Windows 2008 R2 is supported. However, a 32-bit Java Virtual Machine (1.6.0_10 or later) must be installed and in the path, otherwise you won't be able to open the WebCaptureAdmin.html page. Client side, you can open ODDC Capture customer only in the browser of 32 bits (due to 32-bit only supported ActiveX).

  Kind regards
  Boris

• What is there under the Automation Tools menu?

  It's my menu of automation tools in photoshop elements 7.

  Good Jeep57,

  I hope you're not complaining. :-)

  Don S.

• Error replace the certificate SSL - inventory services with using SSL - please help automation tools

  I uses updated SSL tools to change the SSL to vCenter 5.5 certificate.

  Modification of SINGLE authentication certificate has been successful, but I'm having a problem with the inventory services.

  Error message below.

  ==================================================================

  4 update the inventory Service SSL certificate

  1. update the confidence of the inventory of Single Sign-On Service

  2. update the Service of Trust inventory to vCenter Server

  3 update the inventory Service SSL certificate

  4. back to the old inventory SSL Certificate Service

  5. return to the main menu to update other services

  The service chosen is: 3

  [Wednesday 3 December, 2014 - 13:49:12.88]: services that are delivered to market as part of thi

  operation s are: vCenter Inventory Service.

  Enter the location of the new inventory channel Service SSL: C:\certs\InventorySer

  vice\chain.PEM

  Enter the location of the new private key for the inventory Service: C:\certs\InventoryS

  ervice\rui - orig.key

  Enter the SSO administrator user (default value is: administrator@vsp)

  here.local):

  Enter the SSO administrator password (not displayed):

  [.] The supplied certificate string is valid.

  [Wednesday 3 December, 2014 - 13:49:44.41]: last update of functioning inventory Service SSL cert

  ificatsanitai re has failed:

  [Wednesday 3 December, 2014 - 13:49:44.42]: unable to determine if the inventory Service is registe

  Red with Single Sign-On - errorlevel is 1

  =================================================================

  Problem solved, as the vCenter my share of the same SSO domain environment is necessaio that certificcado the backend SSL is changed.

• SSL certificate tool Automation error level 3?

  So I'm working out KB 2041600. I'm trying to update the certificates on two servers separate vCenter and I get the same error "can not determine if the inventory Service is registered with Single Sign-On - errorlevel is 3" while improving my certificate inventory. "." See full changelog below *.

  I am 100% positive that my certificates are correct. I used Derek Seamons scripts in the past to generate my certificates and it has worked for other vCenter servers. I have completed step 1 and replace the certificate for the SSO. I'm just stuck in the service of the inventory now. I opened a case of pension as well.

  ==================================================================

  4 update the inventory Service SSL certificate

  1. update the confidence of the inventory of Single Sign-On Service

  2. update the Service of Trust inventory to vCenter Server

  3 update the inventory Service SSL certificate

  4. back to the old inventory SSL Certificate Service

  5. return to the main menu to update other services

  The service chosen is: 1

  [Thursday June 26, 2014 - 14:51:26.61]: services that are delivered to market as part of thi

  operation s are: vCenter Inventory Service.

  [Thursday June 26, 2014 - 14:51:57.01]: update of the last confidence Inventory Service operation to

  Single Sign-On completed successfully.

  [Thursday June 26, 2014 - 14:51:57.01]: go to the next step in the plan, which was received

  Scheduler of update steps d.

  ==================================================================

  4 update the inventory Service SSL certificate

  1. update the confidence of the inventory of Single Sign-On Service

  2. update the Service of Trust inventory to vCenter Server

  3 update the inventory Service SSL certificate

  4. back to the old inventory SSL Certificate Service

  5. return to the main menu to update other services

  The service chosen is: 2

  [Thursday June 26, 2014 - 14:53:50.92]: services that are delivered to market as part of thi

  operation s are: vCenter Inventory Service.

  [Thursday June 26, 2014 - 14:54:23.93]: update of the last confidence Inventory Service operation to

  vCenter Server completed successfully.

  [Thursday June 26, 2014 - 14:54:23.95]: go to the next step in the plan, which was received

  Scheduler of update steps d.

  ==================================================================

  4 update the inventory Service SSL certificate

  1. update the confidence of the inventory of Single Sign-On Service

  2. update the Service of Trust inventory to vCenter Server

  3 update the inventory Service SSL certificate

  4. back to the old inventory SSL Certificate Service

  5. return to the main menu to update other services

  The service chosen is: 3

  [Thursday June 26, 2014 - 14:54:47.90]: services that are delivered to market as part of thi

  operation s are: vCenter Inventory Service.

  Enter the location of the new stock Service SSL cert file (default is):

  C:\Certs\Inventory\chain. (MEP):

  Enter the location of the new private key of Service inventory (default is: C)

  (: \Certs\Inventory\rui.key):

  Enter the SSO administrator user (default value is: admin@system-doma)

  in):

  Enter the SSO administrator password (not displayed):

  [.] WARNING: Certificate ' CN = vcenter01.burdweiser.com, OU = vCenterInventoryService,.

  O = Burdweiser, L = Houston, TX, C = ST = US signature uses low one-way hash (SHA

  (- 1). In a secure environment, it is recommended to use SHA2 256 or higher has

  algorithm of h.

  [.] The supplied certificate string is valid.

  [Thursday June 26, 2014 - 14:55:14.12]: last update of functioning inventory Service SSL cert

  ificatsanitai re has failed:

  [Thursday June 26, 2014 - 14:55:14.14]: unable to determine if the inventory Service is registe

  Red with Single Sign-On - errorlevel is 3

  In my case, I was trying to replace the certificates before an upgrade from 5.1 to 5.5. The easiest route taken was to uninstall SSO and the inventory service and then proceed to the upgrade to 5.5. After that, replace the certificates.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2057340

• Generate certificates for use with the VMware SSL certificate automation tool

  Hello

  I am trying to use the tool to automate SSL certificate. Our vCenter Server is configured in pulse mode. When I'm trying to generate the request (CSR companies) for Single sing - on (SSO) of certificate signing, option 1 is to provide the FULL domain name. I want to know what domain name FULL should I provide the name of the node or virtual.

  Also I will try to use this tool for other components like updatemanager, inventory service, service of vcenter server, web client. Have experience how to use this tool?

  Thank you

  I successfully replaced certificates for all services. I used the FQDN of the virtual name and not the name of the node to generate the CSR. Thank you

• Error SSL on all Web sites. At clearing roaming/mozilla, deleted all files.

  Hello!

  I've been clearing firefox to my system to reinstall from scratch. I went into %APPDATA%\microsoft\windows\sendto and deleted the folder of Mozilla completely. Now, when I reinstall firefox, it won't even let my my account sync - everything appears as untrusted SSL with the error code: sec_error_unknown_issuer. Can someone help me please?

  Please try to add an exception on the bottom of the error page and inspect the certificate (see the attached screenshot for instructions):

  • What information about the issuer of the certificate contain?

• Error SSL in Thunderbird 31.0

  After Thunderbird now upgrade to 31.0, it sopped working with Dovecot altogether. He cannot use TLS connection more (it worked well before 31.0).

  Registration of IMAP server log file:

  23 Jul 11:24 dovecot mailserver: imap-connection: disconnected (no authentication attempts): rip = 10.y.y.y, lip = 10.x.x.x, TLS: SSL_read() failed: error: 14094412:SSL routines: SSL3_READ_BYTES:sslv3 wrong certificate alert: alert number SSL 42

  IMAP server root certificate use this generated for the intranet. All other certificates, including one used by the mail server, refer to this CA.

  Other services work very well with this configuration, except 31.0 Thunderbird. I had to disable SSL/TLS for her altogether, since the Thunderbird wait still in the phase of "Reception of... mail server configuration. ».

  No other configuration change. Firewall is not blocking communication. I would appreciate any reasonable pieces of advice, except the demotion to farm to 31.0 version, which did not result in this error.

  I also have this problem. Everything that used to work, then the same problem after upgrade to 31.0.

  And I also tried to delete and then re - import my self-signed CA certificate, it did not work.

  External inspection is: delete the self-signed CA certificate and accept the certificate of the server as exceptions. Or manually add server certificates to preference = > view certificates (Certificate Manager) = > servers

  Although he works at the moment, I wish that the bug will be corrected as soon as possible.