Error - the computer is running an operating system Microsoft Dynamics CRM does not support for the installation of the Extension of reporting Dynamics CRM 2011.

Similar Questions

• IM Download premiere pro on mac nut cc, it is said "you run an operating system that Premiere Pro no longer supports. See the system requirements for a complete list of the supported platforms. "How can I fix

  m download first pro cc on nut of mac, it is said "or running an operating system that Premiere Pro no longer supports. See the system requirements for a complete list of the supported platforms. "How can I fix

  Hello

  Please see system requirements below: -.

  Premiere Pro system requirements for Mac OS and Windows

  I hope this helps you!

• during the installation of Vista Service Pack 2, the computor has been disconnected. Now, I don't have an operating system and startup repair does not work. What should I do now?

  Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?

  You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.

  Hope that you made the backup recommended all of your data before attempting to install Vista SP2.

• I need to install a driver on my computer. When it downloads it automatically is to open with excel and does not demand for correct installation. Any suggestions?

  I need to install a driver on my computer. When it downloads it automatically is to open with excel and does not demand for correct installation. Any suggestions?

  Hello

  1. for which device you are trying to install the drivers?
  2 are you able to install or run any .exe on the computer file?

  Try to run the fix to the article below and check if this help.
  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
  http://support.Microsoft.com/kb/950505

• error: 0xc000000f with original Windows Vista operating system... Will not clear the checkpoint!

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Boot\BCD

  Status: 0xc000000f

  Info: An error occurred trying to read the boot configuration data.
  
  The system requires a "windows installation disc. I don't have one.  I bought the new PC and I don't remember if a supplied with the device or asked me to support him!
  I tried the eRecovery download and Boot CD result was the same mistake.
  What should I do?
  Did I lose my data, I an effort to get my system back on?

  Help!  Thank you
  I have

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• I'm trying to download Lightroom on my PC. I get the message "is running an operating system that Lightroom is no longer supported" that I am currently using Windows VISTA 64-bit. Help

  I'm trying to download LIGHTROOM on my PC. I get the message "equipped with an operating system that LIGHTROOM can't stand". I currently use Windows VISTA 64 bit. Need more. Suggestions?

  Hi William. Unfortunately, Vista is not a system for Lightroom 5 or 6 of Lightroom. You will need to Windows 7 or a later version. See here: system requirements

• After installation of the operating system 7, Photoshop CS does not work and is called a power PC program. It is an Intel machine and Photoshop has worked well with OS 10.6.

  After installing OS 7 (from 6 OS) on a machine Intel, Photoshop CS and CS2 will not open. I get the message that the Power PC programs are more supported. Why is this happening? Thank you.

  The message is clear (if you know what Power PC means, in other words). All G5 and many ancient used Mac made by Motorola and IBM called PowerPC processors. More recent that all Mac G5s use Intel processors.

  You talk to any OS, Mac, Windows, Linux, etc, the application that you are using must be written and compiled for the CPU and operating system, or it won't work.

  Your copy of Photoshop were written for older Mac using PowerPC applications and does not not on any Mac running Lion 10.7.x or later version. They ran under Snow Leopard 10.6.x because it was the last version of Mac OS X to include Rosetta, which is an emulator PowerPC that allowed these older apps to function, even though the Mac has an Intel processor.

  Your have several options.

  (1) buy a new version of Photoshop that runs natively under Leo.

  2) back to Snow Leopard.

  (3) purchase Server Snow Leopard from Apple ($20) and that run in a virtual machine as the free VirtualBox, VMware or Parallels. You can then run your PPC software in the virtual machine. It means that you were running an OS within an operating system and need a good amount of RAM installed to support the two well enough for your Mac is not slow to a crawl.

• Want to reinstall XP but the computer does not recognize the cd drive and does not allow for any installation.

  Accidentally deleted some system files and now the computer won't allow me to install anything. Tried to install a new cd player to replace a corrupt, but it does not recognize drive. All the driver and OS install CD. Help.

  Fix missing files:

  Try to run the checker system (CFS) files.  Press start, select run, type: SFC/scannow

  SFC will ask your installation disc (which you must have if you are going to re - install), put it in the drive when requested.  Leave the SFC to replace all missing or corrupt files.

  To resolve the startup problem:

  Check your BIOS Setup and make sure the optical drive is enabled and listed before the hard drive in the boot order.  When you start, there will be a message, "type any key to boot from the CD-ROM."  Type any key (execpt shift, shift caps lock, NumLock, etc) will cause the CD to be initialized in the installation program.  (I use the space bar, it's an easy target.)

  In addition, it would be useful to know a few more things: 1) what edition and service pack level of Windows XP you are running?  (2) what is the model and manufacturer of the optical drive, please?

• Old printer HP - 840C - operating systems PC what this model NOT supported on (if applicable)

  I posted a similar question a few days earlier in a thread of Mac and got my answer, but I also need to know the answer for PC systems.

  In other words, on what PC operating systems will allow the printer driver disk provided with the 840C, does NOT work on (if applicable).

  Thank you

  Bill

  Hello

  This article has all the drivers available for this printer. Discover the fall down and let us know if that's what you're looking for.

  Good luck!

• I have a C4180 printer with Windows 7 operating system. My printer does NOT print on a map.

  The printer will print the written instructions, but not a card.  I know there is a simple solution for this, but I can't understand it!

  Hello

  What is the source of the file? Could be due to the configuration comes from there.

  Kind regards.

• Photoshop elements 13 does not support for the Nikon D750 NEF files

  I just bought a Nikon D750 (July) and I am running a trial of Photoshop elements 13 for quick treatment, but even after the updates and updated RAW it will not open the NEF files, which is supposed to be supported?

  Thanks for your reply, I discovered the problem and it was an older version of Nikon Transfer installed, used with the old camera, updated for Nikon NX - i with Nikon Transfer 2 built in and the files are now transferred to the computer correctly.

• Why the ins does not support for vista? Is that what we write in the script of the ins in support for vista?

  Hi I'm new to nsis. I used nsis to create an installer for all versions of windows, but the problem is that his works well for windows XP, 7 not for windows vista. Is there the thing to mention explicitly in the nsi script?

  Thanks in advance...

  Hello

  Your question of Windows Vista is better suited for the MSDN forums. You can follow the link to your question:
  http://social.msdn.Microsoft.com/forums/en-us/windowsgeneraldevelopmentissues/threads

  It will be useful.

• I have monthly CC and LR and I try to download the new LR6 on my Mac. The error I get is "you run an operating system supporting Lightroom is more." Refer to the system requirements for a full list of supported platforms

  I have monthly CC and LR and I try to download the new LR6 on my Mac. The error I get is "you run an operating system supporting Lightroom is more." See the system requirements for a complete list of the supported platforms. "I checked that my requirements and LR should be supported. Don't know what else to do I can't download.

  Hi Jenn,

  Please check the help below document for the technical specifications for the purpose of Lightroom:

  The system configuration required

  Kind regards

  Sheena

• That's what I get when I go down load I'm stuck error you are running an operating system supporting Illustrator is no longer. See the system requirements for a complete list of the supported platforms.

  

  That's what I get when I go down, load the program on my computer

  You run an operating system supporting Illustrator is no longer. See the system requirements for a complete list of the supported platforms.

  I'm stuck

  Thank you

  Cindi

  I guess you are trying to download from the Adobe web site.  If you are using WIndows Vista/XP or Mac OS X 10.6.8.

  Install Adobe Application Manager and update and connect.

  It will automatically detect the version of Illustrator that is compatible with your computer and the same list.

  Then you can go ahead and install the same.

  You can download the Adobe application manager using link below:

  Windows:

  http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe

  Mac:

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

• Hi guys, I have subscribed to lightroom but can not install the program error "you run an operating system supporting Lightroom is more."

  You run an operating system supporting Lightroom is no longer.

  Hi Lahaina,

  Please check this link to see if your machine is compatible with Lightroom:

  The system configuration required

  Just in case if it is not please upgrade your operating system or contact support to cancel it:

  Customer contact car e

  Kind regards

  Megha Rawat