Error "the dynamic disks are not supported by this operating system." what configuration Raid 0 (striped) readers.

Similar Questions

• Cannot convert a computer unalloacted on a new space, dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  Need additional details as
  Is it a laptop or a pc?
  Have you coveted your dynamic disk basic disk?
  What the structure of partition on your computer?

  recover with these details...

• VMware Tools: VMware Tools don't is not supported on this operating system

  On one of our server VMware Server 2 (Version 2.0.2 Build 203138 (Linux version)), I made a new standard of Windows 2008 edt. Comments of 32 - bits. When I try to install the vmware tools, I get the following message: "VMware Tools is not supported on this operating system. When I check the setting guestos vmx file indicates "longhorn." Someone knows how to fix this?

  You can always get the windows.iso manually and see if you can install the tools.

  First, make a snapshot!

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Message problem "version of NI-VISA, which is not supported on this operating system has been detected... »

  Good night!

  Recently, I want to install the driver NI-VISA on my PC because I needed for arduino. I checked the versions available for my operating system (Windows 8 not 8.1) I tried with 5.01, 5.2, 5.3, but in all cases send me the same message, I look in programs and features in the software section OR for uninstall (if I have) the older version of VISA, but I have found that I Don t have any version. Also I Don t have any version of the software NOR-488 or something like that on my PC (I Don t know if I have to install for installation of NI-VISA) and send me the same message again, I Don t know what to do, if uninstall labview 2010 or get a new version or uninstall 2010 and install NI-VISA and then install LV Please help me...

  Like I said I have Windows 8, I7 Proccesor, LabView 2010 installed with this product: Circuit design, lego mindstorms, engine performance, OR measurement and automation,-configuration system, TDM Excel and update service (all this United Nations programs and features in the software section of OR).

  Best regards and thanks!

  
  

• When will Windows 7 be compatible with Internet access? When I go through access of __web it says "not supported on this operating system" __I just bought 2 new P 7 computers that cannot access the other computers on my network. __

  See above

  ·                                 This is the Forum for Windows Update .

  For questions of Windows 7, here is a link to a list of the Windows 7 Forums:

  http://social.answers.Microsoft.com/forums/en-us/w7network/threads

  Windows 7 Networking Forum at the link above.

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  All Windows 7 issues (other than Windows 7 update issues) should be directed to the it.

  See you soon.

  Mick Murphy - Microsoft partner

• I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

  The upgrade from Vista to Windows 7

  I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

  Have you tried to do an upgrade installation or a custom installation?  A custom installation requires you to back up your files and settings with Windows Easy Transfer and then reinstall everything after installing the new.  If an update install does not install work, you need to do a custom.

  In addition, a Windows 7 Anytime Upgrade will not work and you get a message from a platform if you have bought a UA and tried to use it with Vista.  Vista upgrade requires a detail, a copy in the Windows 7 box.

• Why the NDP module says "you are not allowed for this operation?"

  Hello world

  I hope you can help me with this problem!

  I'm playing with the NDP module has a message saying 'you are not allowed for this operation.

  This happens when I try to create a new project and try to open the window to select a project type. It also happens when I go to the ADMIN and add new types of projects?

  Is there a role limiting me or does some other underlying problem?

  Thank you in advance.

  Hello

  I think that you might miss an active project type category.

  Go to Admin-> NDP-> categories of project types.

  You must have at least one category that is active (which is indicated by a green check mark).

  Once at least one is activated, you will need to go to the Cache and rinse the taxonomy of cache (just to be sure, I would empty Admin Data Cache Group as well).

  Then you can go to the Admin and configure your project types.

  Let me know if you have any questions,

  Dmitriy

• DMA between host and target FPGA is not supported for this remote system.

  I try to cover with my FPGA (on the cRIO-9002) of the RTO.  I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote:

  Error-63001 occurredat reference FPGA VI opened in the target - multi rate - variables - fileIO_old.vi

  Possible reasons:

  NOR-RIO FPGACommunications framework: (Hex 0xFFFF09E7) DMA from the host to the FPGA targetis not supported for this remote system. Another method for controller of e/s or climatiqueLes associated with the FPGA target.

  What other I/O optionsdo I need to move the data asynchronously to the RTO for the FPGA. I have triedcreating memory, but it seems that I can't write to the memory of the RTOSside.

  We have also a 9012sitting around will using this cRIO rather solve this problem.

  I'm very very greenwhen it comes to LabView, so I apologize if this is an easy question.

  As stated in the readme of the driver NOR-RIO, DMA is not taken in charge from the host to the FPGA on the cRIO-900 x series. The cRIO-901 x supports DMA transfers between host and FPGA and FPGA to host all the cRIO-900 x series controllers only support transfers the FPGA host DMA. As a result, LabVIEW returns an error if you try to transfer using DMA controller for cRIO-900 x.

  The 9012 looks like the ideal solution, you are very lucky to have additional hardware laying around

• Destination does not support 64-bit operating system

  I'm trying to P2V a platform Server 2008 R2 64-bit and vCenter Converter says that the destination does not support 64-bit operating systems.  Why is this?  All hosts in my cluster are 64 bit... my NAS is a 64-bit platform... even my machine management running vsphere is 64-bit.

  Thanks in advance.

  And the Opteron revision guide: http://support.amd.com/us/Processor_TechDocs/25759.pdf

  At first, there is the explaining how to determine the review.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Message "this application will not work in this operating system" at the start.

  Original title: this application will not work in this operating system

  After starting, I get this error message:

  Stop: this application will not work in this operating system

  What application is this? How can I fix? I am running XP SP3

  CZFMDXPK c:\program files\fdd + fever disease combo reader\czfmdxpk.exe a the culpit. The problem is resolved and no Malware found. eventvwr helped me identify other problems, and now I'm curious on how to disable the stubborn programs in msconfig. I'll get.

  You did a great job and thank you very much. Have a beautiful weekend. Rainer

• install xp instead of vista and now the recovery discs are not supported

  Pavilion Media Center PC m8000

  1. installed XP on my laptop on the desktop that had need of Vista by mistake
  2. ordered the HP recovery discs and now they are not supported
  3. Build confirmed IDS
  4. How do I remove the XP completely?
  5. Or should I forget it and try to activate the XP?

  Sincerely,

  A ding dong in denver.

  Hello

  I suggest to perform a new Installation, or if you have a recovery disk, you can perform the recovery of the plant.

  For more information, see these links:

  Install Windows XP:

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  Installation and reinstallation of Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  I hope that helps!

• Produce pages with required checksum error: encryption function 'SH512' is not supported on this system

  Hello

  I encounter errors in an application of apex.oracle.com was exported to another environment.

  My target environment is:

  Apex 5.0.0.00.31

  Database 11.2.0.4

  Error page displays:

  The encryption function 'SH512' is not supported on this system.

  Contact your administrator for the application.

  • is_internal_error: true
  • apex_error_code: WWV_FLOW_CRYPTO. UNSUPPORTED_FUNCTION
  • Component.type: APEX_APPLICATION_BUTTONS
  • Component.ID: 8787606655825740717
  • Component.Name: COPY
  • error_backtrace: - PL/SQL call stack - line object handle number name of the object 0x1d785dc58 641

  package APEX_050000.WWV_FLOW_ERROR 709 0x1d785dc58 body

  package APEX_050000.WWV_FLOW_ERROR 0x1d785dc58 1013 body

  package APEX_050000.WWV_FLOW_ERROR 0x1cde954b0 328 bodies

  package APEX_050000.WWV_FLOW_CRYPTO 0x1ddf7b498 1506 body

  package APEX_050000.WWV_FLOW_SECURITY 0x16f574d40 9657 body

  package APEX_050000.WWV_FLOW_UTILITIES 0x1d7fa7ed8 370 body

  package APEX_050000.WWV_FLOW_BUTTON 0x1ed9fe680 2288 body

  package APEX_050000.WWV_FLOW 0x1ed9fe680 2351 body

  package APEX_050000.WWV_FLOW 0x1d71535d8 1720 body

  package APEX_050000.WWV_FLOW_DISP_PAGE_PLUGS 0x1d71535d8 972 body

  package APEX_050000.WWV_FLOW_DISP_PAGE_PLUGS 0x17bf9b618 2221 body

  package APEX_050000.WWV_FLOW_PAGE 0x17bf9b618 2447 body

  package APEX_050000.WWV_FLOW_PAGE 0x1ed9fe680 4938 body

  package APEX_050000.WWV_FLOW 0x1d79de248 173 body

  procedure APEX_050000.F 0x1d77eeb10 33 anonymous block

  This seems to be related to the buttons on the page that redirects to pages that have the value Arguments Page Access Protection must have Checksum.  If I hide buttons, or change the page on the target pages access protection Unrestricted page works fine.

  Bug in Apex 5?

  Hi 1043414,

  APEX 5 works on 12 c, where SH512 is supported. Default APEX uses the most secure algorithm on the platform where you develop. If you need to copy the app to 11g, please make sure that the checksum algorithm is supported on this platform. Go for the shared components > security attributes and click the Bookmarks button expire, where you can change the algorithm.

  Kind regards

  Christian

• The information about the registered printer are not compatible with this version of Photoshop

  Hello

  I hope someone can help us. I'm a COMPUTER technician in a school, we have about 500 machines to Windows 7 64 bit with around 600/700 users - 200 machines have the CS5.5 Master Collection on which is installed. We have an intermittent problem with printing from Photoshop (32-bit and 64-bit versions). Our printers are for the most part, the (modern) HP LaserJet printers, but we have an inkjet Epson B-510DN and some copiers Xerox too. The drivers are all installed on a central print server running Server 2008 R2 and shared via the client computers group policy.

  In the rooms where Photoshop is installed, intermittently when a student goes to print, we will receive the following error message:

  Saved printer information are not compatible with this version of Photoshop, or the saved printer is no longer available. You will need to check your printer settings before you print.

  Photoshop will be gray and then the button "Print" and will not let the user print again. The strange thing is that we can still print from other software such as Microsoft Word or Microsoft software or even non - same Illustrator will print. It just seems to be Photoshop it's has all the problems.

  This occurs when you print to a printer on the site, 90% of whom are HP. As a general rule we set up all of our HP printers with HP PCL6 universal print driver because it facilitates the management of the various models of printers, and we did not limit ourselves atall yet. We are aware that the Adobe software is "preferential" for Postscript drivers, but aren't our printers, HP PCL is their mother tongue. We tried to change a printer for the Postscript UPD driver to test but he brought no improvement. We also saw the issue in depth altogether with our Epson B-510DN, which is configured with the newer model specific driver Epson as uses our photography service. As we see with different printers, I don't think the printer drivers are to blame - unless someone want to prove me wrong.

  Like I said the problem is intermittent, and we are having trouble tracing it down for a user, computer, or a software problem, as it is so intermittent. Has anyone another considering cela and managed to overcome? Given that it only happens in Photoshop is this a bug that Adobe have recognosed and fixed the CS6? The only solution we found that he must go in printer, change the default printer from one to the other and vice versa - cela seems to shut up Photoshop.

  Thank you, Dave.

  Here's the answer that I received from Adobe, and it worked.

  'Ok. Try to open 'print', while holding the space bar; He ignores all the saved values. "Also, make sure that the correct printer that he set as default.

• How can I fix the Netflix "Sorry, the video is is not supported on this platform." on Sony TV KDL40EX640?

  Netflix has worked, but I get the message "sorry, video is not supported on this platform." now. I have a Play 3 station I spent to watch Netflix movies. The PS3 was supposed to do a software update before he would play movies. How can I get the TV on Internet Netflix movies to replay? Thanks, Larry

  Hello Larry,.

  Welcome to the community of Sony.

  This problem has been resolved and is now available in your TV to Netflix.

  If my post answered your question, please mark it as an "accepted Solution".

• the dynamic types are not picked up by - ("com.vmware.library.vcaccafe.asd.customresources") .getAvailableInventoryTypes

  Try to get our host vCAC recognize/import the type Dynamics/object classes and create custom resources. The call to action 'createCustomResourceFromInventoryType '. The inventory of the available dynamic types is not returned. As vCO using test research of the api; I see the DynamicTypes under the namespace created for them. Of course, they exist in the inventory of vco under dynamic types. Test the code below:

  type host = vCACCAFE:VCACHost

  var inventoryTypes = System.getModule("com.vmware.library.vcaccafe.asd.customresources").getAvailableInventoryTypes (host);

  for each (var inventoryType in inventoryTypes)

  {

  If (inventoryType.GetName (). IndexOf ('case'). = -1)

  System.log (inventoryType.GetName ());

  }

  Basically just get returned undefined. It doesn't seem like a problem of vCO. It seems that just vCAC is unable to recognize the dynamic types.

  Have had problems with vCAC and DT vCO plugins in the past and have tried several permutations of plugin removal/relocation, (KB2003386) including the file, restart the server and delete Configurator package & dar and then reload. These versions using:

  DynamicTypes 1.0.0.1951696

  vCAC 6.1.0.2073620

  vCAC Infra 6.1.0.2040915

  something stupid in the end... Turns out be the default vCO server which is the embedded server vCO in vCAC. Replace that in the Red hight of the vCO uses the vCAC org - and it's good.