Error: "the file is maybe damaged. the file header does not match the checksum calculated"during the installation of Windows 7/8

Similar Questions

• "The file is maybe damaged. The file header checksum does not match the checksum calculated. »

  Hello

  I work with a HP Pavilion a6030n PC with Vista OS base. I had problems with the computer recently when starting. He continues to work at some point during the process and crash, forcing a hard stop. I'm not too computer savvy, but can generally work through questions. I tried several (and probably useless) methods to try to get the computer to work, with a modicum of success. Today, I received this message: "the file is maybe damaged. The file header checksum does not match the checksum calculated. "Hmmm... I looked through the forums and found a lot of computer-speak, who basically told me that I'm over my head. I thought that I would try at least ask the question before resorting to what is the hard drive a person to fix if all goes well.
  I can get it working again, or is my HP to his last breath?
  Thank you!

  If warnings getting You ' r files are corrupted, which could indicate a problem with the hard drive (most likely) or the memory/RAM in the computer (a little less likely but a good possibility).  Your computer came with a disk diagnostic or diagnostic software you can run to test the components inside?  You can also download this software and run it to see if he can help you narrow the possibilities.  Otherwise, I recommend to find a local repairman good and trustworthy and have them check for you if you are not adept at hardware troubleshooting.  It can get very frustrating and very expensive, very quickly.

• service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".

  service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".

  I have SP2 with all updates, I have this error message after the failed attempt to load service pack 3.

  Hi Carl_Focus_Phone,

  ·         Is confined with Update Service Pack 3?

  ·         Did you do changes on the computer before the show?

  You can follow the steps in the article in the Microsoft Knowledge Base and check if that helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  You can also see the following articles for more information:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

   

  Learn how to install Windows XP Service Pack 3 (SP3)

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Let us know if that helps.

• Possible error with module GWT.xml file. The value of time compilation agent user (ie6) does not match the value of user.agent (ie8) run time

  Hi there... How can I sort this problem as this message looks back constantly on google Account... ERROR POSSIBLE WITH GWT. The value of time compilation agent MODULE XML FILE user (ie6) does not match the value of user.agent (ie8) run time

  Hello nEve Adam,.

  Thanks for the return of the response.  Below, I've added some links Google support on this issue.  I hope this helps.

  ERROR: Problem Possible with your *. GWT.XML file module. The value of compile time user.agent (opera) does not match

  http://www.Google.com/support/forum/p/blogger/thread?TID=2d6d9bd1326a07c4&hl=en

  In addition,

  Message from Web page

  http://social.technet.Microsoft.com/forums/en-us/ieitprocurrentver/thread/53194559-306a-4ffc-a614-4bac817f178d

• error indicates "file is possibly corrupted. The checksum does not match the checksum calculated.

  Hello world

  I use Vista Home Basic, SP2. Windows takes a lot of time in the judgment and often fails to do this completely. Windows after logout again a soft purr at the disk continues. Windows fails to start quickly. After several reboot it starts and sometimes even refuse except CD assisted.

  In order to repair boot directly from CD is not possible either. Jump the trunk and windows from the Windows CD start loading.

  Error, States "Checksum error. The file is possibly corrupted. The checksum does not match the checksum calculated'.

  Do I have to reinstall windows or any help please.

  Jean-Philippe

  Hello

  I suggest you to follow the methods and check.

  I suggest you perform a check disk in Windows Recovery Options.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Warning of Chkdsk.

  Important: If all data on the hard disk may be lost when running chkdsk, as the chkdsk attempts to repair that affected sector.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

• Signature App, number of Folios error does not match the main file Folio

  Hi all;

  I have a standalone application of 250 pages that I'm trying to compile for the Apple Store. I've read through the forums and enabled "AppBuilderLoggingEnabled.cfg" in my home directory of the user to discuss the issue. Here is an excerpt of the newspaper which has been created which, to me, shows why the app is not signed.

  46386 codesign ERROR [main]. Signatory - failure during the signature

  java.lang.RuntimeException: invalid package, number of folios does not match the primary file (Folio.xml or Issue.xml) 251-250 folio

  at com.adobe.devtech.codesign.IPAOutputHelper.convertFolioProduceFormatToFolio (IPAOutputHelp er.java:272)

  at com.adobe.devtech.codesign.IPAOutputHelper.replacePlaceholderFolio (IPAOutputHelper.java:1 92)

  at com.adobe.devtech.codesign.IPAOutputHelper.execute(IPAOutputHelper.java:82)

  at com.adobe.devtech.codesign.Signer.sign(Signer.java:169)

  at com.adobe.devtech.codesign.Signer.processArgs(Signer.java:106)

  at com.adobe.devtech.codesign.Signer.main(Signer.java:46)

  46388 codesign ERROR [main]. Signatory - error: invalid package, number of folios does not match the master folio (Folio.xml or Issue.xml) 251-250

  I deleted special characters in the article titles and rebuilt the app only to deal with the same error. I have advanced and created a new AppID in the portal to Apple developers, created new files available, and the error remains. I am now to create a new folio and import the items into the new folio to see if that will solve the problem of "number of folios does not.

  Any help or idea would be amazing. Thanks to you all.

  -mat

  I created a new folio and all items imported again. After hitting "Create App" for this new folio, to about 10 pages in a 'PDF Export' error stopped the app creation process. I went in InDesign to update the layout for the 10 page to see that the PDF export issue kept me from updating the page layouts as well. Some thing in the InDesign file was not playing nice with the creation of folio, so I created two new InDesign files, deleted the article and built a new article from scratch. I was able to import the new page in a new article to the main folio and click on "Create App" again. This time he had no problems with the creative process. I have synced files available in App Builder and could sign the application code.

  I guess the moral of the story is to double and even triple check each item along the way to make sure there is no problem, is introduced into the process that eventually causes headaches during the phase of distribution of creating applications!

  -mat

• When I try to print a PDF file it does not print and goes directly to a backup of the file option.

  When I try to print a PDF file it does not print and goes directly to a backup of the file option

  original title: pdf print
  Hello

  1. don't you make changes on the computer before the show?
  2. don't get any error message?
  3. what version of the operating system is installed on the computer?
  4 is the issue limited exclusively with printing PDF files?
  5. where are you printing from PDF files?
  6. What is the brand and model of the printer?

  
  Method 1:
  Run the fix it and check.
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  
  Method 2:
  Perform the steps from the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 3:
  You can perform the steps from the link and check if you are able to print.
  Resolve PDF printing problems. Acrobat, Reader
  http://kb2.Adobe.com/CPS/873/cpsid_87346.html
  
  Reference link:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated

  Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated. Tried all posisible boots and no joy, continues to turn it back on! Frustration...

  Hey James,.

  I does no change, I didn't download a document from my email (from a sender of confidence). I tried to start in safe mode, just, it restarts and goes back to the corrupted checksum display... Last known good config was the same result! The only error message is one that is in the title of this post, not others. Another detail, that I forgot to add is that it does not get insofar as a logo windows before it fails, just the toshiba start screen, then either passes the corrupt message checksum or a blue screen and restarts before I can read the text on the blue screen. Thanks for your response! Any additional help would be excellent if you can. In the meantime, I'll try your methods. Thanks again
  OK, I have now managed a Startup Repair trying over and over again. Restore all settings and now looks very good, thanks for your help!

• total size of the files of Windows 7 does not match the size of partition

  In the D: partition

  total space: 265 GB free space: 59.1 GB

  There is only one visible folder: Daisy, size: 87.4 GB from the Explorer

  Other records hidden three: info Volume system, c:\Windows\Msdownld.tmp, $RECYCLE. BIN takes up almost no space

  Of course free space does not match the file size.

  Do not partition system, no problem to update windows and restoration, sleep or page file.

  Some strange things:

  1. with the help of file size 3.4 correctly see the size of the file

  Daisy file occupies 206GB

  Once I copied the whole file to the other partition Daisy

  and the result is the record more like 2xxGB

  so I guess that 206GB is the right size

  /////////////////////////////////

  may be ignored.

  2 folder being read-only Daisy

  Even uncheck or untick read only box in the properties of the folder does no effect

  After loading, it still shows read only

  3. 'read only' does not work

  2, daisy file is read only

  but I managed to delete files inside

  ////////////////////////////////

  ////////////////////////////////

  Is it a mistake to folder structure?

  It's a newly installed windows, so I guess that windows is clean

  Hope to see the solution and identify the problem

  Thank you very much

  OK, based on your new information, the error is that Daisy is 206 GB but Windows Explorer reports it as 87GB.

  No other information seems more relevant.

  Ideas-

  1 run ChkDsk on the drive - [first of all, make sure you have a backup of Daisy or make a new backup always] in Windows Explorer, right-click on the drive & select Properties, then the Tools tab, then click the check now button, turn off the option to make repairs in first to see if there are errors or not before making any decision as repairs can delete or corrupt files which are reported in the file allocation table.

  2. find another utility that measures the size of record to help you track down all the difference here.  TreeSize Free will be repeated.

  I do not understand your comment "later, I found the reason why I can't locate the"office"is the language of auto change." It's in Chinese at first but watch the 'bureau' cmd"that this had not been mentioned before.

  Denis

• DCP fails the test of Waimea - image format does not match file CPL.

  I made my film using the preset Wraptor DCP in first Pro CC for a DCP CRU drive kit. The film was sent to Deluxe/Technicolor for QC before sending it to my dealer and returned with an error report. The detailed error report is sent to me tomorrow, but the short message for me was that the aspect ratio does not match on the CPL file and therefore failed a critical review of Waimea.

  Any ideas on why this error happen?

  Waimea | D-cinema key management server. CineCert

  Yes, the STC is all square pixels. the dimensions determine the proportions for matting

  Here is a cheat for all acceptable resolutions sheet.

  Resolution / Aspect Cheat sheet report | CHAMELEON DG Creative & Design Agency BLOG

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk

• I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  The "import" tab appears only when the iPhone is connected to the Mac via a USB port.

  ITunes detects your iPhone when it's connected?

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• The temporary internet files folder does not show all the files in this folder property while is more than 1 GB. How to delete temporary internet files. ?

  The temporary internet files folder does not show all the files in this folder property while is more than 1 GB. How to delete temporary internet files. ?  Disk space is very low around 1 & half GB. Please someone help resolve this issue. I am looking for the solution, but it did not have a specific.

  Thank you best regards &.

  Atul Zade.

  CCleaner is very useful to get rid of temporary files, you can get it here: http://www.piriform.com/ccleaner you can use it to clean your temporary files, but DO NOT use registry cleaning works, registry cleaning is mainly a useless effort that can cause more harm than good.

  John

• How to import the mp4 files, it does not work on my mac

  How to import the mp4 files, it does not work on my mac

  If you try to import a video to use as a guide in your timeline, the video must be H.264 with AAC audio. You cannot use the other MP4 videos with other codecs (such as the MPEG-4 video codec).

• I have 9, 1 pages in PDF files that are accessible and the need to combine them into 1 PDF file.  I tried adding, adding and the combine process of PDF files. The file created does not take my changes. The file created is partially accessible, but I have

  I have 9, 1 pages in PDF files that are accessible and the need to combine them into 1 PDF file.  I tried adding, adding and the combine process of PDF files. The file created does not take my changes. The file created is partially accessible, but I have to re - the problems that I had fixed in the unique files. I need suggestions on what else can be done, if any. Using Acrobat pro XI.

  By habit, I tend to combine PDF files in the Page pane by right-clicking thumbnails then 'Insert of Pages'-> 'From File'. For me, this preserves the tags of these two documents, although the tags may have to be moved to the correct location (if I remember correctly the tags for inserted pages are put at the end of the tag structure, regardless of where the pages are inserted), if I put the tags in the document to insert into a container as a Section tag It makes the process easier. Travel set of tags in the right place is the only re-fixing that I remember having to do. What behavior you encounter?

  a 'C' student