Error: The lines of data with unmapped dimensions exist for period "1 April 2014".

Similar Questions

• Synchronize the dictionary of data with model only works for models imported?

  When I imported data dictionary model (file-> import-> data dictionary) then in relational model the two buttons "Synchronize Data with Model Dictionary" and "Synchronize model with Data Dictionary" works very well.
  
  But when I model created from scratch and I'm clicking on the buttons "Synchronize data dictionary with the model" or "Synchronize model with Data Dictionary" nothing happens.
  
  It works only for models imported?
  
  (Data model EA 3.3)

  Hello

  Yes, Synchronize only works for objects that were imported to the original (like Synchronize uses the information entered during the import to determine which database connection and the database object to compare to).

  If your model is not imported, you can achieve the same effect as follows:
  -Open the template in Data Modeler and also open the relevant physical model.
  -Do an Import of data dictionary, select the objects you want to compare with that.

  After the import phase, this will display the dialog box to compare, showing the differences between the objects imported from the database and your model.

  Note that if you intend to generate the DDL to update your database of the difference (as in "synchronize with Model Data Dictionary"), you must select the "Swap Target Model" option in step 2 (select database schema) data dictionary import wizard.

  David

• A virtual machine or the template with the same name is already registered. Server error: the specified key name or identifier already exists.

  Hi all

  I have a 5.5 esxi server just the a virtual machine running at the moment. I try to clone this as shown below:

  http://nchrissos.WordPress.com/2013/04/22/cloning-a-VM-without-vCenter-in-ESXi-5-1-free-edition/

  However, I get the error:

  A virtual machine or the template with the same name is already registered. Server error: the specified key name or identifier already exists.

  I have no vcenter (yet), and it's just the 1 vm. The virtual machine is turned off. I get this error regardless of the name, I said that when I choose "add to the inventory.

  All advice appreciated.

  Thank you

  Oh dear...
  you read bad advice on the internet and then you get also the stupid advice here.

  Ignore both!

  If you want to clone a virtual machine by copying - do it like this:

  Create new virtual machine with the wizard.
  Skip creating a disk for new customers.

  In Datastorebrowser copy the original vmdk to the new dir, which has been created by the wizard.
  Reopen the new VM and edit - assign the vmdk that you just copied.

  The procedure of the blog is not supposed to work.
  Sissine trick doesn't make sense either

• Find the store of data with more free space.

  So I'm trying to build a script to configure the virtual machine.

  I'll have it retrieve the node to keep newly available vm out based on the cluster, I said to use. I'm just using the Random function to do that then I select a node in the cluster.

  Where I have questions, how can I

  find the data store less used, based on a particular data store naming scheme.

  I want to say is:

  Hypathetically, I for example named data warehouses:

  store data-prod-01 200 GB free

  store data-prod-02 500 GB free

  free data-prod-03 10 GB store

  free data-qa-01 200 GB store

  free data-qa-02 1000 GB store

  I want to throw in a piece of code to tell him to watch data warehouses "datastore-prod *" and place the virtual machine on the store of data with the most space. (that's assuming that the vm will agree on the DS and let fresh generals)

  I guess I want to know if it is possible?

  I would also be concerned about scenario that perhaps the vm should I build just will not match on any of my other data store. I guess I need a logic to check if it is still possible.

  This is more than a wish rather than a necessity. I'm thinking if I just read the info, or use a cvs file after running the script. Any recommendations would be greatly appreacted.

  Hello, drivera01-

  You should be able to do this with a very small amount of code.  Download all data warehouses that correspond to the model name, sort free space (in descending order) and select the top one.  As:

  ## get the datastore matching datastore-prod* that has the most freespace$oDatastoreWithMostFree = Get-Datastore datastore-prod* | Sort-Object -Property FreespaceGB -Descending:$true | Select-Object -First 1
  
  ## if the freespace plus a bit of buffer space is greater than the size needed for the new VMif (($oDatastoreWithMostFree.FreespaceGB + 20) -gt $intNewVMDiskSize) {<# do the provisioning to this datastore #>}else {"oh, no -- not enough freespace on datastore '$($oDatastoreWithMostFree.Name)' to provision new VM"}
  

  The second part, where it checks for sufficient freespace on the data store that has the most free, can be updated to behave as you need, but that should be the basis.  How does this look?

• It is possible to capture the lines of delete with the CHECK feature operations?

  10.2 using triggers I can connect the deleted lines, but is it possible to capture the lines of delete with the CHECK feature operations?
  
  Thank you.

  You can find Fine grain auditing and capture strategy audit records (for example, access to a column), and also capture the SQL text.

  But that still won't 'copy' on all lines accessed by the user who runs the verified order (for example a DELETION).
  If you want to "save a copy" of the row that has been deleted by a user, you would still have to write your own trigger ON DELETE.

• "ERROR: the user name you have chosen already exists."

  When someone registers on my registration form (http://puremediccom.worldsecuresystems.com/puremedic-guru-register) with a user name that already exists, the form is sent, but in the notification of workwlow I see behing username "ERROR: the user name you have chosen already exists." When you try to connect to the site it does not indeed.

  Is the best way around this to request an address of email as a username? Or is it possible to run the validation on the existing user name?

  See you soon

  Jerun

  Hi Jerun,

  I think that the workaround in this case, so need email address to match the username is to use some JS.

  Please note the custom scripts is off of BC, but here is an example that may help.

  http://KB.worldsecuresystems.com/598/bc_598.html#main_Set_the_value_of_the_username_field _ equal_to_the_email_address_field

  Kind regards

  -Sidney

• Foreign key constraint, not recognized during the synchronization of data with the model dictionary

  Hello

  Data Modeler is a foreign key constraints do not recognize when synchronizing data with the model dictionary, although the foreign key is there (in the database that a data dictionary is read). I can't find any criterion when a foreign key is not recognized by the Data Modeler. Are there limits to the length of the attribute, or the number of columns in a foreign key, or other limitations which may lead to this behavior not to recognize a fk by Data Modeler? I have columns more than 32 characters. I compared with the fk is recognized by DM, but I can't find anything that indicates why it is not recognized.

  I wonder if someone also has constraints of foreign keys that are not recognized in the comparison of data bases and model?

  Thank you

  Robert

  Hi Robert,.

  Thanks for the comments, I logged a bug.

  Philippe

• message error "the file is associated with another photo in the catalog.

  CC of LR, windows, photos on external hard drive

  Files that I was still using yesterday now are more connected to the catalog.  Try to locate the files I get the message "the file is associated with another photo in the catalog. How can I find and solve.

  Thank you

  This is because this same image, same time date and time of the device, is already in the catalog using a different file name.

  Conversely having not happening again is to STOP Renaming files on import or manually in the file manager or with another image, software.

  Each camera has a system that can be customized if necessary if you have 2 cameras of the same brand and model of separate file naming. And even then, they are separated by the serial number of each camera.

• All of a sudden, I see not the line I draw with the tool pen in Adobe Illustrator?  I don't see points.

  In general, the line drawing shows that I create points with the pen tool.  Suddenly, he stopped it.  I need to see the lines.

  Colleen,

  If I (put) understand, you can enable elastic and here:

  Preferences > anchor and selection display

• Creating folders in the view of data with powercli store

  Hello

  We try to automate some parts of a build script and we want to create a folder in the view of data warehouses to move all the local disk.  the only place that I can create a folder has been the point of view of Cluster, DataCenter and VM.  is there a way to do this?

  Thank you

  Matt

  This is a hidden folder named "datastore".

  You can do

  $dsHome = Get-Folder -Name datastoreNew-Folder -Name MyFolder -Location $dsHome
  

  Note that there is 1 folder "data store" by the data center.

  If you have more than 1 data center in your vCenter, you need to indicate what you want "datastore" folder from the data center.

  $dc = Get-Datacenter -Name DC$dsHome = Get-Folder -Name datastore -Location $dcNew-Folder -Name MyFolder -Location $dsHome
  

• Facing problem in the recording of data without overlapping in loop for

  Hello

  I am facing problem in writing data withou overlap if I run the outer loop for the 2 times or more, and inside the loop, I make table in a way that I want to, but when I try to compile this table with record temperature I am not able to do. Please guide me through ths.

  Thank you

  Hnagpal

  Himanshu salvation,

  To start reading your matrix of the second line, you can use a table of Index function once you have loaded the table of your spreadsheet file. The function Array Index lie in the range of functions under functions > programming > Board Index. The help of LabView is very useful to explain how to use this function.

  With regard to the accuracy of the numbers when read you the spreadsheet file that you read is formatted in fractional chain, since form you it converted into a mixed string before saving. In order to recover all the precision, read the worksheet as a string and then convert it to a string using a string Fract/Exp to fractional numbers conversion function. This feature is on the range of functions for String > String/Number Conversion > Fract/Exp string in number. The help of LabView is also very useful for explaining the operation of this function.

  Best,

  Dan Nelson

  Technical sales engineer

• Report Generation Toolkit, production of the 2147417842 error, "The application called an interface that was marshalled for a different thread."

  Hello world

  I have an application that stores data in an Excel worksheet by using the report generation tool.  My VI have worked well in the past using Excel XP, but since I have upgraded to Excel 2007, I get COM errors like this:

  "2147417842 error occurred while the application called an interface that was marshalled for a different thread. in Excel_Insert_Text.vi', this is the exact wording, even with the odd punctuation and capitalization.

  The first occurrence of the error is not determined.  Sometimes, to the record 10 sessions, involving a new .xls file, may occur before this error.  Once this error occurs, I must leave LabVIEW to solve.  If I try to do something with Excel, I still get this error, even if sometimes it comes out different source Excel_Open.VI is another.

  These screw logging worked fine until upgrading to Excel 2007.  I checked and I have been using a very old version of the report generation tool, v1.0.1.  I read the documentation and had a big sigh of relief when I realized that I needed to upgrade to v1.1.2 for Excel 2007 help.  However, even after the upgrade, I still get the same errors.  I'm using LabVIEW 8.0.1 and I also build these screws in an application.   The error occurs in the application built both in the IDE of LabVIEW.  Anyone out there have any idea what I can do to fix this?  I google a bit and discovered it is a COM error, but I can't find any reference to the report generation tool specifically.

  Thank you

  Phil

  I think that suits him!

  Here's what I did: I left privileged execution environment level upper VI as "as the appellant.  I tried the "user interface" configuration, but it seemed to slow down considerably the program.

  Then, I found each sub - VI, calling the report generation tool and define the environment for running favorite "user interface".  All the errors went away, and the program is much happier now.

  Big assumption on what a Christian, thank you!

• Windows Live Mail error: the authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing.

  The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Live Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.

  The rejected e-mail address was * address email is removed from the privacy *'.

  List of topics 'b - day.
  Server error: 554
  Server response: 554 Authentication Failed, must login
  Server: 'smtp.mail.wowway.com '.
  Windows Live Mail error ID: 0x800CCC79
  Protocol: SMTP
  Port: 25
  Secure (SSL): No.

  How can I fix it?

  original title: 554 error when sending email

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Error message - it only works with Windows Media Player for Windows XP when trying to convert playlists to Excel.

  Original title: windows media player 11 trouble conversion playlists to Excel after obtaining bonus pack.

  I downloaded the bonus pack, everything works well except the library management wizard. Comes with the message that it only works with Windows Media Player for XP only. I am currently running windows xp edition family and windows media player 11.  Help, please.

  Hello

  You can follow this link & check if the problem persists:

  How to export a playlist in Windows Media Player?

  Hope the helps of information.
  Please post back and we do know.

• How to validate windows after the disk crash hard with or without pay for a new disk

  Hello

  Thanks for any help. My hard drive crashed after it overheated. Each attempt I used to reinstall or use a backup version failed because my hard drive could not be found. This disc that came with my computer was so useless. I had to go to a computer repair shop & buy a new CD with Windows 7 on their part. Now, when asked to reactivate it, it says my code is not genuine and is not even from America. I read in another message that a person would buy a CD to their computer manufacturer. I do now? I have the dang code for my original windows installation. It is right on the side of my computer Tower, but obviously it does not work as disc of the repair shop has a different code.

  Now that my computer is totally fixed, is it possible for me to try and reinstall my windows with the repair disc supplied with my computer when I bought it? Alternatively, I can reset my computer to its factory installation? Are these files on my computer since I have used another drive? I'm guessing that probably not. Thanks again for any help.

  Statistics of the computer:

  Windows 7 Home Premium 64-bit

  Hard drive: 1 TB

  Memory: 3 GB

  Processor Intel Pentium E58

  I'm pretty computer illiterate, so if you tell me to go to a certain place and type a number of keys, I won't be able to understand it, even with the simplest explanations... I'm sorry.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012