Error: The 'MIDlet-Version' attribute is not a valid version number

Similar Questions

• Error - the application or DLL is not a valid windows image. Please check this against your installation diskette when trying to open a program or start the computer.

  Original title: bad image.

  I get two errors of bad image whenever I open a program or start a computer, for each program.  the error that says "the application or DLL is not a valid windows image. "Please check this against your installation diskette" I don't have any disk and don't know what to do.

  These file names, look a little suspicious and didn't get good Google search results, so I think that the first thing to do is to tell us a little about your system.  Now you can enjoy when you report a problem, provide you with any error messages you see and not a part of it (not paraphrase either).

  The second thing to do is to try to be reasonably sure that your system is free of malware and then if you have these problems, you can fix them (which would be the third thing to do).

  I still wonder why the Microsoft Support Engineer made you reference to an article that makes no sense at all...

  The first thing to do:

  Unfortunately, MS Answers forums does not prompt for any information system when a new question is asked, so we don't know anything on your system.

  Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  The second thing to do:

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  The third thing to do:

  Restart your computer and solve the outstanding issues.

• Error message - file inetppui32.dll is not a valid Windows image

  Just started happening after years of use. Each computer xxx.exe file or I try to load I get this error message "xxx.exe - bad Image of the application or DLL C:\WINDOWS\SYSTEM32\intppui32.dll is not a Windows image. valid Please check this against your installation diskette. »
  When I click OK the file loads normally. The problem is that I do that about 50 times when starting. That means "Please check this against your installation diskette"? How this is done? How dooes one to take to solve this problem? Thank you

  Hello

  Please tell us a little more about the system. What is the brand and model of the computer? Do you remember anything specific that past that you think could have triggered these errors?

  In addition, please tell us what you run antivirus software.

  For more information, take a look at this and see the answer marked as the JoseIbarra response.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/error-the-application-or-DLL-is-not-a-valid/fa12c4dc-C175-4399-A0A9-f50aa085c901

  I hope this helps!

• causes VIX/vmrun.exe ' error: the specified version is not found "with WS 8.0.1

  vmrun.exe t ws start "Q:\VMware\REG\REG-XP3 (RC2).vmx"
  Unable to connect to the host.
  Error: The specified version is not found

  I installed in this order:

  
  Workstation 8.0.1

  VIX 1.11.0.18997

  On a Win7 x 64 SP1 box.

  There also the vSphere PowerCLI 5.0.0.3501 installed however this seems to need to ESX and vCenter, so it is useless for me.

  
  Long story short, I need vmrun maintenance tasks such as deleting snapshot which through GUI takes a.) ages, b.) pump lock your workstation / takes focus.

  
  How can I get this working again? I checked the vixwrapper - config.txt and it lists the following:

  # Workstation 8.0.0
  vmdb WS 14 8.0.0 Workstation - 8.0.0 - and-vSphere - 5.0.0
  Player vmdb 14 4.0.0 Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation 8.0.0 - 8.0.0 - and-vSphere - 5.0.0
  WS 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  drive 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation e.x.p - 8.0.0 - and-vSphere - 5.0.0

  Thank you.

  I just found this same problem with Player 4.01 exaxt... VMware VIX who uses this configuration file and if the gift ' e versions EXACTLY match it flows without any usable information.

  Add this to your config file and it will work...

  # Workstation 8.0.1
  vmdb WS 14 8.0.1 Workstation - 8.0.0 - and-vSphere - 5.0.0
  Player vmdb 14 4.0.1 Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation 8.0.1 - 8.0.0 - and-vSphere - 5.0.0
  WS 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  drive 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation e.x.p - 8.0.0 - and-vSphere - 5.0.0

• Unable to connect to the host.   Error: The specified version is not found

  vmrun-t esx h https://192.168.1.123/SDK u root Pei password list

  Unable to connect to the host.

  Error: The specified version is not found

  Any ideas why it does not work?  It is run on a Windows XP workstation.  The target server is on the local network and running ESXi 4.1.  The vmRun version is 7.1.2 and is installed with Workstation 7.1.2.

  I also tried Ubuntu 10.04 with vmRun from a Workstation 7.1.2 installation.  There, he also fails with the same error.

  Note that ESXi 4.1 is used to test installation is not allowed and is running in demo mode.  Management of the vSphere client works without any problem the same Windows XP workstation.

  Any help would be appreciated.  Thank you.

  You must install the full package of VIX by http://communities.vmware.com/community/developer/downloads. It contains only components to manage the workstation. Please note that I had to install in the VIX 1.10.1 order then Workstation 7.1.2 to get both to work on my Windows 7 computer.

• Error "the application"Steam.app"is not open more."

  I use Steam to play games, I recently installed Trove which began to hang Steam (and not run) rarely when I clicked on the play button.

  Sometimes, when Steam closes (or hangs in my case), when I try to open it again, it gives me an error "the application"Steam.app"is not open more.". It can be fixed by restarting, but it's boring and useless. How can I fix it?

  Restart the computer in safe mode. Some caches maintained by the system will be rebuilt.

  Safe mode is much slower to start up as normal. The next normal boot can also be a bit slow.

  If you use no FileVault 2 in OS X 10.7 ("Lion") or later version, you can restart as usual (not in safe mode) when the login screen appears. There is no need to log on in safe mode.

  If you use FileVault 2 in OS X 10.11 ("El Capitan") or later version, or if you don't know if use you it, you as usual then connect in safe mode, and then restart (not in safe mode.)

  If you use FileVault 2 in OS X 10.9 ("Swat") or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you cannot start in safe mode. In this case, request further instructions.

• Error: The specified CSK password is not valid.

  Hello

  I am able to install the application on the BBZ30 in DEBUG Mode, but as soon as I try to install it on the same device in RELEASE mode, I get error error: the CSK password specified is not valid.

  No idea what's causing this error and how to fix it.

  Thank you

  Joe

  This indicates that the password that you use to sign the app (a step not required for debug builds) is incorrect.  Note that there are two places, you set a password, one for your developer certificate (author.p12) and another for your BlackBerry token ID (bbidtoken.csk).  For the development of WebWorks, these must be the same.  To change your password BlackBerry ID token, use the link below.  Note that you need to sign on the same BlackBerry ID account that you used to sign the original version of your application.

  https://developer.BlackBerry.com/Codesigning/

• vmrun - error: the specified service provider was not found.

  Hello

  I installed vmware server 2 on Gentoo 2008.0.

  Installed versions:

  VMware-server 2.0.1.156745 - r3

  VMware-modules 1.0.0.24

  VMware vix 1.6.2.156745 - r2

  Everything works fine from a remote machine, but if I want to start a virtual machine in the console via vmrun, I get this error message:

  Error: The specified service provider was not found

  Any suggestions how I can fix this problem?

  The problems seem to stem from the fact that you don't have the "vix.libdir" parameter in your global configuration file. Usually, it is located in/etc/vmware/config by the presence of a line like:

  vix.libdir = "/opt/vmware/vix/lib"
  

  If you add to that, vmrun needs to start working.

• Error on startup: "application (the file name is) is not a valid windows image, check against your installation diskette."

  computer startup happens on the screen with "application (the file name is) is not a valid windows image, check against your installation diskette." It can be any name of a file that appears, if I click ok it will.  Anyone know what I should do now. Thank you

  Hi LorraineMatthews,

  ·         Did you do changes on the computer before the show?

  ·         What is the exact error message?

  ·         Are you able to boot to the desktop?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• during the installation of Windows XP, I get this error "the ordinal 410" "urlmon.dll" not found. Is there a way to do anything with XP. I'm in the middle of the installation

  My PC has a virus where it could not display icons, taskbar just shows the background wallpaper... my last resort is to reload XP... so I started and got this error "the ordinal 410" "urlmon.dll" not found.

  Hi Dodamoda,

  Thanks for posting. Do you get this error when starting Internet Explorer or some other place? Also, you said that the last resort was to recharge. Reload you the entire operating system already? Regarding the DLL error that you've published, please follow the article below the link if this problem is when you start Internet Explorer.

  http://support.Microsoft.com/kb/254490

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Implementation error "the application BTTray.exe does not able to initialize properly" soon after connecting to Vista Premium 32 bit. Same error when you try to connect to Citrix, "the wfcrun32.exe application could not initialize correctly.

  On my laptop Dell Studio 1555 with 32-bit Windows Vista Premium (with SP2), as soon as I connect, I get an error "the application BTTray.exe does not able to initialize correctly. Click OK to terminate the application". Then another pop-up window appears the error information. After awhile, it prompts you to close the program. This happened since I updated the Bluetooth Widcom software from the DELL Web site. I tried to uninstall the software and put it back in place for the DVD that comes with the laptop. But that did not help.
  Yesterday, when I tried to connect to the remote Citrix server, so I was able to work remotely, I got the same error for the software Citrix, "the application failed to initialize properly wfcrun32.exe. Click OK to complete the program." Then another pop-up window appears the error information. After awhile, it prompts you to close the program.
  My colleague, who also has a laptop with Vista home is able to connect to Citrix without any error. He said he did a lot of configuration changes in the security features in vista.
  Is could someone please help me get rid of these annoying errors?

  I came across a similar story, while answering a different question, earlier today.  It seems to involve Dell machines and a corrupt file of the MFC80.dll.  If it's useful to you or not, I'm not sure, in any case, you would like to read this link.

  2.0 secure Local data RMCPlg.exe and BTTray.exe errors
  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&DL=false&l=en&s=Gen&docid=6CF68D431EAAB41BE040AE0AB6E16686&doclang=en

  The previous post, I referred to was this one.

  The Groove application error
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/10c8f8d6-D225-481e-99CA-4e048d401c2c

• When I right click on the android project and click 'Signin for BlackBery world' it shows the following error: the specified CSK password is not valid.

  Please see the full error below

  [2013-10-08 12:17:53] Start the Mediaplayer project checklist...
  [2013-10-08 12:17:53] Skip Mediaplayer to check, because the apk file has not changed.
  [2013-10-08 12:30:22] Start the packaging Mediaplayer project...
  [2013-10-08 12:30:24] Start the Mediaplayer project checklist...
  [2013-10-08 12:30:29 - Mediaplayer] Finished verification warnings or errors, check for problems of view for more details.
  [2013-10-08 12:30:31] Start the Mediaplayer project checklist...
  [2013-10-08 12:30:31] Skip Mediaplayer to check, because the apk file has not changed.
  [2013-10-08 12:30:54] The RDK signature completion status: (C:\Users\Shravan\workspaceAndroid\Mediaplayer\dist\Android 4.3\Mediaplayer.bar) error: the CSK password specified is not valid.
  [2013-10-08 12:32:04] Start the packaging Mediaplayer project...
  [2013-10-08 12:32:04] Start the Mediaplayer project checklist...
  [2013-10-08 12:32:05 - Mediaplayer] Finished verification warnings or errors, check for problems of view for more details.
  [2013-10-08 12:32:07] The RDK signature completion status: (C:\Users\Shravan\workspaceAndroid\Mediaplayer\dist\Android 4.3\Mediaplayer.bar) error: the CSK password specified is not valid.

   

   

  Please help me
  

   

  Hello

  You link your old keys with your BlackBerry ID?

  You have the right code signing credentials in c:\Users\[USERNAME]\AppData\Local\Research in Motion\? (author.p12, barsigner.csk, barsigner.db)

  As an alternative, you can export the apk of eclipse and then try the packer online.

• BlackBerry Smartphones Helpp! The "MIDlet-Name" attribute is missing

  I can't use my app world because I need to update, but whenever I have it try indicates

  "manifesto of inavlid or applicationdescriptor.

  The "MIDlet-Name" attribute is missing

  I have a bb 9360, I just got yesterday, what do I do? Please help me

  1. Options > device > application, scroll to BlackBerry AppWorld and delete it.
  2. Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart.
  3. Now, using your BlackBerry browser, go to the www.blackberry.com/appworld and redownload the AppWorld. It will update your BlackBerryID as well.
  4. Opening of session.

• I bought a windows version of 11 elements and not a mac version. So I can't install the dvd and it does not accept my serial number for the "downloadversion" how this can be solved?

  I bought a windows version of 11 elements and not a mac version. So I can't install the dvd and it does not accept my serial number for the "download version" how this can be solved?

  Thank you in advance.

  Arjen

  You can also download the Mac in trial version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 11: l http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm

• I need to update the screenshots for a new version of an app existing Itune application to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  I need to update the screenshots for a new version of an existing iTunes Connect App asks me to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  You must call the assistance of the company and ask them to help you with this. You can find contact information by logging on http://digitalpublishing.acrobat.com/ and looking at the Middle at the bottom of the page.

  Neil