Error - there might not be a sound device installed on your computer, it can be used by another program, or it may not work properly.
Original title: How do I install the audio device for windos xp driver.
Tengo una don't destop pero no works el sonido y me lo siguiente al try using el windos Media Player appears: it might not be a sound device installed on your computer, it can be used by another program, or it may not work properly. AS PUEDO HACER PARA CORREGIR EL ERROR!
Hello hernan.
· Do you get the Windows default sound on your computer?
· You did it of any hardware or software changes on the machine before the show?
You can follow this link and check if the problem persists.
Hope the helps of information.
Please post back and we do know.
Tags: Windows
Similar Questions
-
Original title: Media Player
THE FOLLOWING IS a MESSAGE I GET WHEN TRYING TO DOWNLOAD FILES: "Windows Media Player cannot play this file because there is a problem with the audio device. "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly. What "audio device" are talking about?
Hello
1. do you get an error with this error code?
2 have you installed multiple audio devices on your computer?
3. what version of Media Player do you use?
4. were you able to play the files using Media Player without any problem before?
5 did you a recent software or changes to the material on the computer?
Audio device is the part that allows sound from the computer. If the appliance is used or if the drivers are corrupt, then you can get the error message.
I suggest you go through the steps and check.
Method 1:
Quit other programs that may be using your sound device, and then try to play the file again.
Method 2: Install an updated driver.
Step 1: Firstly uninstall the audio driver from Device Manager and add or remove programs
How to change or remove a program in Windows XP
http://support.Microsoft.com/kb/307895
a. click Startand then click Control Panel.
b. click Systemand click on the hardware tab, then click Device Manager.
c. to the title sound, video and games controller, check the sound card that is listed.
d. right click on the sound card and then click on uninstall the driver.
Step 2: To see if an updated driver is available, use Windows Update or access the sound device manufacturer's Web site.
Follow these steps to do the same thing:
a. click Startand then click Control Panel.
b. click Systemand click on the hardware tab, then click Device Manager.
c. the title sound, the video controller and games, make sure that the sound card is listed.
d. right click on the sound card and then click Update driver to install the latest version of the driver.
e. visit the sound card manufacturer's Web site to determine if a newer version of the driver is available for download.
Method 3:
If you have multiple audio devices installed on your computer, try to use another. The selected audio device might not support Secure Audio Path (SAP).
Additional reference on:
Resolution of the problems of reading in the Windows Media Player for Windows XP
http://support.Microsoft.com/kb/306317/
Hope this helps and keep us informed if you need help.
-
Original title: speaker FOR desktop
In the deskstop I connected an external speaker INTEX WITH power SUPPLY via USB and pins with audio jack. The device is installed REALTek. When I play songs or video, he said: -.
"Windows Media Player cannot play the file because there is a problem with the audio device. "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.
How to solve this problem.
Hello
I realize has the inconvenience that you are having with your speakers that you get an error message while playing the songs. I will certainly help you to question.
I would like to know some information:
Have you tried to plug any other speakers or headphones?
You did changes to the hardware/software before this problem?
Have you tried using these speakers with another PC?
Also, I suggest you refer to the suggestion of Pinaki reducing replied on June 20, 2014 from the link below:
Hope this information helps.
Thank you to provide us with the information to look for more on this subject and to better understand the issue and we will be happy to offer our help.
Please get back to us with an update on the issue, we will be happy to help you.
-
I've been remubing programs from my pc... remube accidentally incontinence (volumen control) how can I get it back?
Hello
· What is the number and the model of the computer?
· What is the service pack installed?
· Are you able to hear the sound of the computer?
· You have a windows XP Setup disk?
It seems that the Sndvol32.exe file is damaged or missing. You can follow the steps in method 2 of the link below and check if it helps (ignore the title of the article): http://support.microsoft.com/kb/319095
-
I downloaded fonts high voltage Rough and love him, want to use it. Can use it in all other programs, but Photoshop. It does not appear. I uninstalled and reinstalled. Any ideas for help? Thank you!!!
Look for the regular regular name on the list of 14 fonts pse.
What is the police connection high voltage?
-
Windows Media Player cannot play the file because the required video codec is not installed on your computer
can help me is it you pls with this.i am unable to find.where can I download codec windows media player video
There are many video codecs out there. What is the suffix (.xxx) on the video you are trying to play?
-
Media Player cannot play the file because the required video codec is not installed on your computer
How to make the necessary corrections?
This is the error message that I keep getting when I try to view a previously recorded Webinar
Windows "Media Player cannot play the file because the required video codec is not installed on your computer"
How can I fix it? Help, please!Thanks for the link, but I don't want to become
a member of this site in order to view the video.No guarantee... but it may be worth trying to
Download and install 'one' of the following codec
Packs.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Windows 7 - create a Restore Point
http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-pointProceed at your own risk *.
Windows 7 Codec Pack
http://www.windows7codecs.com/
(Windows XP - Vista - 7)Media Player Codec Pack
http://www.mediaplayercodecpack.com/
(Windows XP - Vista - 7)K - Lite Codec Pack (full)
http://www.filehippo.com/download_klite_codec_pack/
(Windows XP - Vista - 7)Win7codecs
http://www.MajorGeeks.com/Win7codecs_d5959.html
(Windows - author all: Shark007)Info on CCCP (combined Community Codec Pack)
http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
(Windows XP - Vista - 7)Good luck...
-
My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Is anyone know how can I access my hard drive again?
Thank you
Hello
You has made changes to the system before the error appearing? Cancel the changes.
(1) in Device Manager > right click on the driver, and then select uninstall
Reboot and Windows will reload the driver
(2) remove the upper & lower filters that cause errors in Code 31
http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
Access the manufacturer's Web site and search for updated driver
-
Original title - USB - IF xHCI USB Host Controller
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
I have a permanent error on my computer and when I run the troubleshooter I get the above message. It says Windows cannot load the driver.
Hello
USB devices remove all you can - restart the computer - is still there, the error? If it isn't
It is related to one of the add-in devices that you removed. If she is still there, then, the question is
either a device internal who can not remove or physically with the USB bus itself.
If it was not there, add devices at a time until it is displayed - keep in mind that it is
possible that there are two (or more) devices in conflict over the issue. Once you
identified the check of the aircraft with the help of the manufacturer.1. to find the control panel - device - device - right-click on it - uninstall - Manager then
Restart the computer to see if it clears.2. same place - double click on the device - driver tab - driver update - to see if that helps.
3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
online documentation and drivers, diagnostics and ask questions in their forums on all known
questions. Update the Bios and chipset or other USB drivers.=====================================
If necessary, we will use these additional troubleshooting methods:
How to fix Code 31 errors
http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I have rebuilt my laptop Gateway MX6625, did not drive recovery, is went to the gateway web site, all the drivers have worked except the multimedia sound. The gateway was no help, they told her, but the there does not work
Hello JesusVigo,
Thank you for visiting the Microsoft answers community.
Have you tried to use the disk of Windows XP, or Windows Update running default drivers to search for best driver for your sound card?
Also, I found only 1 driver on your system gateway Web site is located here.
Hope this helps Chris.H
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I have installed autodesk inventor 9, 2002, and it is not working properly it gives an error that there is a problem of compatiability. Is there something I can do to correct the problem of compatiablity?
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx
Windows Vista Compatibility Center
First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
If this is not Vista compatible, read the info on the link above.
It works for some programs, but not all.This applies to software programs, NOT hardware drivers.
If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.
See you soon.
Mick Murphy - Microsoft partner
-
I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one. Are these drivers or another file that I could use DL?
Hi JasonBedgood,
1. Once you get the error message?
2. did you of recent changes on the computer?This error occurs if the required driver is not installed or the driver is damaged.
I suggest that you update the driver for the device and check.
How can I update the driver for network card on the computer
1. click on Start, click Control Panel, and then double-click System.
2. click the tab hardware , and then click Device Manager.
NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
3. click on network adapters to expand.
4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
5. click on Update driver software.
6. follow the Wizard update software driver to update the driver for NICs .Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyIf the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
I made a successful backup of the Easy Transfer of files on an external hard drive. Previously, this computer was in Vista for more than 1 year without any problem.
After you perform a custom installation (I wanted to start with a clean install) of Win7, everything works. I installed the Windows/Office updates and all my other program files. When I run the transfer Assistant, it locates the 'old computer' transfer file and reads OK, showing users and the size of the 40.1 GB file transfer. When I click the button forward, I get error: there is not enough available disk space to transfer your files and settings. However, I have more than 280 GB free on my C: drive.
This disc is watching him and what should I do to work around this problem. If I can't get my files/settings back, I'll be VERY unhappy customer.
I've just passed through even - WET previous Dell PC running Windows 7 Ultimate to HP with Windows 7 Home Premium. The Belkin Easy Transfer cable help.
WET said not enough space even if the hard drive is twice the size.
I clicked on "Advanced" and noticed that WET strives also transfer Dell factory image from the recovery partition and the HP recovery partition was smaller.
I unticked (unchecked) files recovery partitio on old computer and everything is going very well from hand to hand.
Hope that helps! -
Original title: WAN miniport driver
A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
I use windows 8 in my sony vaioMODEL - SVE15123CNWHi Praveen,
Perform the steps suggested by Nirmal S from the link below and see if it helps.
Answer please if you have any questions.
-
Hi all:
I added two esx servers in my vc received the error: there is not enough licnese installed to run the operation.
There are some servers esx with correct license file in VI3.5U3 in my environment. I want to add more than two servers esx with evaluation mode in this virtual Center. I got error.
connection to the esx server directly without vc, to feature license tab, I selected evaluation mode is ok. but I can't added these in vc. Why?
can someone help out me.
Thank you very much.
hihiy
I don't think you can, you need to turn your TC to eval too, and before we do, your VC should not exceeded calclation eval of 60 days from the first day, it has been installed.
BTW, since you have valid VC 2.5 license, and is not the Foundation of VC, why don't you showing your ESX with eval license server to license? Add then the two ESX to your existing VC?
vcbMC - 1.0.6 Beta
Lite vcbMC - 1.0.7
Maybe you are looking for
-
How to restore the XP Welcome screen
My X 200 is a machine of a user, so I decided to disable the fast user switching. In the process I inadvertently stops the welcome scree also. When I went to turn it on again, I got a dialog box with a message indicating that a - atginahook.dll - pro
-
Number pages correctly for books.
I need an update to Windows 2000. I want the update that contains 'folds of the book' and number the pages of the book. Also, who has a "manual duplex. I got it to work, but not at home. Please help me step by step. Your help would be greatly apprec
-
Control Panel Network Connections folder
It seems that I had a Trojan horse program that deleted my network connections in the Control Panel folder. I can't understand how to restore it? Thank you Ned
-
How to choose the applicable fix
my computer crashed and recovery gives me two patches to download, but I have to choose one and the right one. If not who will damage my system... so, how can I know that to download
-
Drivers Windows 7 for the GeForce 8400 M GT
Original title: GeForce 8400 M GT I have a Sony VGN-AR730E, I had to replace the hard drives on the laptop, I installed Windows 7 to the beginning of my operating system. for some reason, the computer can't find GeForce 8400 M GT. I tried to downloa