Error timeout when using hardware DAQ-6024E frequency measurement

Similar Questions

• Error-200284 when using two daq cards

  I have an application written in Visual C++ that reads data out of a data capture with success card. However, now we want to add a second DAQ card, so we can increase the number of input channels. However, I have trouble getting the second card works fine. He continues to give the 200284 whenever I try to read the input data. I tried playing with the two loops in the same thread and with them in threads separated without result. Any ideas on what could happen?

  Thank you!

  Hello Kaladin,

  I'll take a look at the link below to see the cause of the error, but also some common things suggested to try.

  http://digital.NI.com/public.nsf/allkb/FEF778AD990D5BD886256DD700770103

  Best wishes!

• In Vista, doing the system restore, get error "unspecified error occurred when using System Restore.

  My system restore keeps coming back with the error, unspecified error occurred when using System Restore. Cannot change files. Also, after that I am unable to use my avast antivirus. All the sheilds on my Avast are lost. I; m not computer saavy so please help me

  Hello

  You can be infected with the Malware

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If not, try Safe Mode do a system restore

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• VISA-1073807343 error code when using ResourceManager.GetLocalManager (). FindResources (filter) to detect the map of Pickering PXI

  I'm upgrading our test system for Windows 7 and NI Developer Suite 2012 DS2 in Windows XP and NI Developer Suite 2008 4th quarter. I have a problem with the help of VISA to detect devices PXI of Pickering. The problem occurs with the next .NET NationalInstruments.VisaNS.ResourceManager.GetLocalManager () call. FindResources (filter). I use the filter "PXI? * INSTR.

  To trouble shoot this problem I was using the VISA program FindResources.2008 c# example. I get the following error message when you apply the "PXI? * INSTR"filter. "Where not enough information or the device or resource is not present in the system. VISA-1073807343 (0xBFFF0011), ErrorResourceNotFound error code.

  Looking at other markets, I infer that VISA is not find the maps. I came across the same error message when I tried to launch the "GPIB? * INSTR"filter however I determined that there was a problem with the NOR-488 driver. 2. after having repaired the driver of the FindResources.2008 program would find the GPIB instruments using the "GPIB? * INSTR"filter.

  Max the Pickering cards appear in "Devices and Interfaces" and are listed as follows:
  12: PCI Device 'PXI12::9:INSTR '.
  15: PCI Device 'PXI13::13:INSTR '.

  In XP, the cards have been identified as:
  PXI12::9:InStr (Pickering 40-785-522)
  PXI13::13:InStr (Pickering 40-780-522)

  Also Max for each device, I am able to open the Panel to Test VISA.

  Any ideas why the VISA is not able to detect these cards?

  Thank you

  I thought about it. Apparently I needed Windows 7 to install the driver for cards of Pickering. I guess the "PXI VPP / VISA drivers" supplied by Pickering Test would take care of this.

  Until Windows has installed the driver of Pickering cards have been listed as a PCI device under 'other devices '. After installation, the cards have been listed under "devices PXI of NI-VISA.

  MAX the card now are listed as:

  12: Pickering 40-785-522 'PXI12::9:INSTR '.
  15: Pickering 40-780-522 'PXI13::13:INSTR '.

• Compaq Presario CQ71 - error 1002 when using recovery (windows Vista)

  Hi guys,.

  I just encountered error 1002 while using the recovery... Recovery successfully crossed reformattng my drive, but crashed before reinstaling the original content. It's okay if I'm trying to hard drive or dvd rom recovery, all this translates into error 1002. I did some research and it seems that it is a very common error in hp without adequate solution products. I think I'm out of luck because my warranty expired years ago... How can I solve this problem? For me, it seems that recovery content originally placed on my hard drive (and later burned on the DVD by me) had been damaged. I see 2 possible solutions here:

  -to order an another recovery of the drives together (although I saw a few reviews it did not)

  -buy the new "Windows" and install a new fresh install (I will be able to perform the new installation at all?)

  I'd really appreciate pointers as I really don't want to lose my money for a solution that would work!

  Kind regards

  Robert

  Hello

  You can call the MSFT customer service and they will generally be able to find it for you.

  http://answerdesk.microsoftstore.com/msusa/en-us/answerdesk/answertech

• Timeout when using Modbus vi

  Hello

  I develop a .vi that queries data from two separate flow meters and a N - A via Modbus converter.  The interface on the flowmeters are set to 111 address and cannot be changed, so I can't use the same master to get the data of the two flowmeters.

  Ive attached a picture of the code for reference. Ive included only the part of Modbus to not confuse the issue.

  The problem is, when I change the schedule of the loop to 5 seconds, I take the readings of modbus timeout error 61 and loops from re - connect try but can't re - connect to them. When the time is 3 seconds or faster, they work perfectly.  4 seconds, I get an intermittent error, and the case of re - connect works fine.

  3 seconds or less = works very well

  4 seconds = occasional errors

  5 seconds = no job.

  I'm not an expert in Modbus with certainty.  So please excuse my messy code.  I intend to clean it once I get it working correctly.

  My flowmeters are RS - 485, 38 400 baud, Modbus RTU.  They connect to modules of ADAM 4017 I use the Modbus TCP to connect to.  The A/D converter is also of Modbus RTU and its on the same circuit as the MMin counter and its address is 3.

  Any help or advice would be appreciated. I can reach the entire .vi if necessary.

  First of all, I wanted to note that it looks like you are using a different API the API OR-supported Modbus, to take my answers with a grain of salt.

  A complete shot in the water, it is possible that the device that you communicate through a form of communication for a period otherwise it goes into a resting State after the connection. For example, if you do a Modbus TCP connection and then no communication occurs for more than 4 seconds, the slave goes into an idle state. This doesn't seem like a problem. likely, but it's something to look at. Due to the fact that I'm not familiar with the API you are using, I don't think that there is much more that I can recommend.

• Error 550 when using PCTCT to remove a file

  I use PCTCT to download the files that I analyze, then I need to remove the file from the server. (11 development coldfusion)

  Can list and download files very well, I'm butting my head on a problem that I can't solve.

  USING THE SAME PATH AND FILE NAME that allowed me to 'get' of the file - when I try to delete the file - I get this error.

  Error: file 550: no such file or directory.

  (again - the path and name that I provide are identical to the path/name of file-

  If there is a permission problem, I can remove files via Filezilla, using the same credentials - without problem)

  Here's the call to delete-

  < PCTCT action = 'delete '.

  connection = "myConnection1."

  liabilities = 'true '.

  Timeout = "360".

  fichierdistant = "" #myPath # fileName # ""

  Item = 'file' >

  ANSWER (if not 'answer' - code at least that 'works')

  connection = "myConnection1."

  Item = "" #myPath # fileName # ">"

  This isn't what the docs say - or how other examples online convey - but it worked for me

• Video rendering error 10008 when using PNG on clip

  As soon as I add a PNG above a video clip, it fails when I try to make. It gives the error code 10008 is. I tried several png. If you add in front of a video, it will work fine. As soon as you try to use the same image over the video (using a logo for example), it fails as stated above. This means that I'm not able to add a logo watermark to videos.

  Please notify.

  Thank you.

  A simple alternative is to put your watermark on a green or blue background as a pdf file, then use the green/blue screen installation.

  I remember reports that contain PNG used to ensure transparency in photo - images to have exactly the same dimensions of the pixel as the setting of the project, for example, 1920 x 1080 full HD.  However, if this were not the case, I thought they still made, but have been converted to PDF, if transparency does not.

  Geoff.

• error-2147217900 when using in labview database connectivity tools

  Hai... im new to create the database with the help of examples available im get some ideas... even if when I try to create a table I get an error that is attached with this thread... kindly someone give suggestion to create the database using the Toolkit or suggest resources to...

  I got it.. I tried to create a pass/fail column, I mistake here... and it corrects... must use pass_fail

• DAQmx (200284) timeout when used in threaded loop - parallel processes

  Hello

  I use a fast NI6537 for a digital Acquisition. The Board of Directors is installed on a NIPXIe-1062 Fund controlled by a controller OR SMU-8130, where the software is running. I read all the 32 lines as a single channel, 50 MS/s, and the clock is one provided by the Council itself. I set the timeout as infinite, but I also tried various other parameters. As I read a finite samples lot of 524288 samples at 50 MS/s, a timeout of 1 second should be enough by far.

  As much as I put the call DAQmxReadDigitalU32 (...) in a simple loop I have no problems, everything works fine.

  for (...) {

  DAQmxReadDigitalU32 (...);

  } / / This loop works perfectly

  While, if one has a loop within a multithreaded process, or simply I give the system of freedom inside the loop, sometimes, I get the timeout error. Note that the time cost of the Sleep() function is only a few milliseconds, so there is no reason for the call to timeout.

  for (...) {

  DAQmxReadDigitalU32 (...);

  Sleep (1); To free the system resources...

  } / / This loop stops erratically

  With the latest code, I see also that in fact, the jury has not finished playing, i.e. less back than that requested samples. It seems to me that something is preventing the acquisition, but I'm not able to understand that. The same phenomenon occurs even in LabView, using the VI read: sometimes reading randomly generates a timeout error and stops, although LabView is the only application running.

  You could tell me what I'm doing wrong?

  Thanks, Piero.

  Hello Piero,.

  I don't know how you built your code in labVIEW, but I was unable to reproduce this.  The error that you have posted but reflects an overflow memory buffer and we has expired.  How many samples you ask to be returned with your DAQmxReadDigitalU32? In the code that I've built, I simply left the default timeout to 10 seconds and asked that all the samples available in the buffer.  I have read the pieces of the buffer until I hit 524288 samples desired and then I get out my loop.

  This error probably indicates that you ask a number of samples and have not yet acquired in the timeout you set.  Please post if these suggestions do not help.

• directx error invalid when using Skype

  I can't use my webcam logitech on Skype, I get the message not to have installed DirectX valid.

  Hello KhalidMehmood_978,

  1. What is the exact error you get when you try to install Skype on Direct X?

  2 was the work of webcam very well at any time before your computer?

  I suggest that you install the latest version of the drivers for the Logitech webcam and check if you have the same problem. You can visit the Web from Logitech website and install the latest drivers.

  http://www.Logitech.com/en-us/support-downloads

  Also download and install the latest version of DirectX. You can follow the link that will give you information on that below:

  http://support.Microsoft.com/kb/179113

• Blue screen error: 0x0000001a when using system to restore with new hard drive disk

  original title: blue screen error when you use the system disk to restore with new hard drive

  I bought a new hard drive to my computer because the old one gave me a bunch of error messages on screen blues. I installed in the tower and tried to use my restore and system recovery disks that the manufacturer has given me, the process has got to the last disk then asked for the system once again restore disc, and then began to load the last steps and went to blue screen error. I don't know what to do, I mean it's a whole new drive hard, so where could the error come, theres nothing on the hard drive because I have not yet used really, yet. Help, please

  I have finally fixed the problem myself. The problem was that one of the sticks three memory was bad and the only way I could test this error. I took two sticks a left, used disks I had and was able to restore my computer, then I put a stick, turned on the computer, had no errors so I let him, so I put the last stick in and com immediately on, I had the Disconnections: memory management and that's when I knew that the last stick of memory was bad I took it back and now my computer works well and I can't buy more memory for not too. So if someone gets this BOSD error on memory, I'd say 8/10 computers have bad memory (not a number). If youcannot run the tool of diagnosis of memory like me then I would suggest to do what I did with the trial and error, it was the only way to understand the problem. Thanks for your help

• Error 502 when using Https

  Hello

  I have a BB (8120, OS 4.3) to Orange (UK) and when I try to download my server application using https URL I get error 502 with the following message:

  Http 502 error: bad gateway

  I checked the URL of my computer and its URL is valid.

  If I try to navigate to a URL HTTP and HTTPS not everything works and I can download my application.

  Does anyone have an idea, what the problem?

  Problem has been resolved once I managed to add the BB browser to the device.

• Setup error 1635 when using turbo tax.

  At turbo tax up and running.  When I opened the last time, I got an error 1635.  Cannot uninstall or reinstall.  I followed all the steps of turbo tax problems.

  Hi ksharpe,

  I suggest to try the steps from the following link and check if it helps:

  Error 1635: This patch package could not be opened...

• Error 0xc000007b when using Autocad.

  I have an error message

  0xc000007b

  I have Canon open autocad! Help, please

  I don't no how to fix this error

  Thank you very much

  Oscar

  If it's your program, then it seems to be a common problem - http://forums.autodesk.com/t5/tag/0xc000007b/tg-p/tag-id/25168/category-id/3001

  There are some suggestions in some of these messages about the esp ' MSVCR100. DLL' replacement. I would advise not to download "all-out" on the internet, but there are alternative methods which means certain positions, and there are a few other possible corrections suggested.

  I have not tried one of these, just found by a search. I don't have the program or the problem, and it assumes that the link is on the same program that you are referring to.

  It will be useful. (at least until the other suggestions come in).