Error to the element of the queue with simulated signal, but not with the DAQ hardware

Similar Questions

• We can connect the output of the sensor directly to the DAQ hardware or any interface necessary?

  We can connect the output of the sensor directly to the DAQ hardware or any interface necessary? If so wat kinda necessary interface?

  How to change the sensor output to match entry-level data acquisition?

  If the sensor output beyond daq range is provided. What are its effects? pls answer

  -It depends on your signal and the type of device you have. Your DAQ provides a package of signals? Also, what type of signal you want to measure? You must select DAQ that matches that. Take a look at the following before you start:

  Getting started with NO-DAQmx: Main Page

  And take a look at table 1 in the following article to wire your signal to the right:

  Wiring and considerations of noise for analog signals

  -You will need to use external circuitory to match the input of data acquisition range.

  -You could damage the unit.

  If you have any other questions, please after return. And, don't forget to give more details about your configuration, the hardware and what you're trying to do.

• Drag elements hiding in preview then 5 slides, but not as HTML in the browser

  I created an interactive with many phrases being sorted in two boxes.  I created a tip action that hides the drag element and display something when fell into the correct location.  This works when I preview the next 5 slides, but not when I saw as HTML in the browser.  Help, please.

  When you select the target object - you one - in the first tab of the D & D Panel, you will see that article appear. Maybe watch a few videos on YouTube? I have a post somewhere on my blog http://blog. Lilybiri.com

  Sent from my iPad

• How to put in place of the daq hardware several lists on a shield with ecu mc toolkit?

  Anyone has the pleasure to set up multiple lists on an ECU data acquisition?

  I use MC Addon for Labview ECU 2011.  I can successfully a single list of acquisition of configuration data and read the data correctly.  This method uses the DAQ list mode to initialize instead of polling, it really cuts down ensuring CAN.

  I do not have my VI on this PC, but it's basically ECU Connect > initialize ECU DAQ list (sample rate and channel list sets) > ECU transmit DAQ list to ECU > DAQ Start list > LOOP {ECU read}

  I need to create a second list for the acquisition of data to sample at a different pace.  Any ideas?

  Thank you

  Ben

  I continued to play with the read command and finally successful initialization to do work.

  Sorry for the rough state of the son, but I just got to run :-)

  

• Error of the DAQ Assistant

  I've just updated LV 2009 SP1 LV 2010. I use a LV 32-bit on a 64-bit computer.

  When I open the DAQ Assistant, I get a pop up window that says "LabVIEW: an exception occurred in the external code that is called by a function of the call library node."  This could have corrupted memory of LabVIEW.  Save all work to a new location and restart LabVIEW.  VI "Advanced Timing.vi:1" was arrested in node "" a call to "get of DAQmxAssitant_DAQmx IO Info.vi of control.

  If I hit OK, DAQ Assistant is locked up, if I use the Task Manager to close the LabVIEW vi breaks down.

  I already reinstalled 9.5.1 DAQ device drive. without success.

  There is no such version. The most recent is 9.2.2.

• scaling problems with the DAQ hardware help

  I am a new user and I'm trying to do a simple scaling of my entries of tension using the DAQ help. For example: a channel entered around 8V on a 0 to 10V input selection. I'm trying to resize it (linear) to show me around 28V using y = mx + b formula. My value of m is 3.2 and b 0. What DAQ Assistant bed is close to 16V instead of 25V (3.2 * 8). I custom make several scales, basically multiplying the entry of 2, 3, 4, 5, & but none exits causes what I expected according to the formula, and even the 5 x the value decrease. If I go to "not to scale", I read 8V, which is what actually happens in the 6255 map. Any thoughts?

  Hello DB66.

  Remember that the scope of the input Signal must be defined scale post. How do you set as your input signal range, you're reading may be scaling themselves within the reach of the input signal. A value of coefficient of 3.2, the stove must be Max = 32 Min =-32, since your device probably has a +/-10V range.

  Hope that helps.

• is daq bit resolution applied to the area defined in the daq assistant or well to the limits of physical blood of the daq hardware.

  Hello, this is my first post here,

  I've been wondering about this:

  When you configure a new daq with the daq Assistant, is the resolution applied to the voltage / number of entries you define, or is it a fixed value per volt by channel.

  For example:

  I have a 6015 usb data acquisition, it has 16 inputs analog, 16-bit resolution 250 kech. / s 09:50 volts.

  so is this as (2 ^ 16) / (16 * (-10-10)) = my resolution through volt?

  or that this has nothing to do with the amount of channels,

  If I want to measure more than 0 to 5 volts, my 16-bit apply from 0 to 5, or even more scale of data acquisition (which is 09:50 volts)

  Thank you

  Marco

  You will get full-resolution 16 bits on each channel regardless of the number of channels is configured.  Renault most are multi-plexed if your specification of sampling RATE in usually a global significance that you can only scan channels with a sampling frequency = MAX RATE / number of CHANNELS.  Also, most NI Renault have a Programmable Gain amplifier on the front-end server, so if you specify a range of voltage smaller in your task configuration the amplifier will automatically increase the gain to use most of the possible BIT ADC.  You see care device and for more details...

• Diffenernce / choice between using a shielded connection block (2120 BNC) or the DAQ hardware?

  Hello

  We build a new configuration of lab that will need hardware in the loop detection by sensors data and formatting / analysis using programs and possibly return data in material for the control.

  We are confused that the connection block shielded BNC (who has the outputs and analog inputs / digital) or a DAQ hardware for can be used?

  What are the main differences between them?

  shed light on the above is very appreciated...

  Best regards

  FESMI

  FESMI wrote:

  We are confused that the connection block shielded BNC (who has the outputs and analog inputs / digital) or a DAQ hardware for can be used?

  Data acquisition is what is the real measure of the signals.  The Terminal is just a simple way to route signals for data acquisition.  If you can actually the terminal box, cable and card DAQ.

  I highly recommend talking to your representative local sales OR to make sure that you get exactly what you need.

• ORA-12560: TNS:protocol adapter error. Virtual MACHINE works on old MBP and Win7 but not on new MBP [mid 2015 retina], speed or network problem?

  We strive to use our VM on the new retina MBP (mid-2015) with MacOS X 10.11 (El Capitan) but we had a problem starting from Oracle. If we first converted our ESX VM but once on the Mac laptop Oracle (v12.1.0.1.0 on WIN2012R2) does not open the database, error;

  ORA-12560: TNS:protocol adapter error

  Does not change us any setting on the virtual machine itself so services work fine. Network has set the IP with host only. Tried with Fusion 7.1 & Fusion 8.0.2 new Mac with nothing doesn't. Also with the different versions of the VM tools. Tried to remove the NIC in Fusion and recreate, don't sucses.

  Funny enough the same virtual machine starts fine on PC (workstation 10.3.0 & Win7), MBP beginning 2011 (Fusion 7 & Mac 10.10) or ESX itself for Oracle opens the database!

  That's why we think in the direction of the new MBP specific? speed or network issue? Ring the bells?

  
  

  Help appreciated!

  Bottom line, this is a problem of Oracle who dislikes the MBP on a virtual machine.

  for reference;

  Virtual MACHINE works very well on all platforms, but not on the latest MacBook Pro (retina, 15 inch, mid-2015). So, when you try to use sqlplus you might get the error that there is no such thing as SID. Earphone works very well, but the DB process does not record with earphone or work correctly also. But the process is running and a SID tnsping returns an OK. This isn't a problem of configuration Oracle as the VM and DB works well from the moment where you run the virtual machine on a PC or an old MBP. Either way, Virtualbox has the same problem so not a problem of Fusion.

  I will record a deal with Oracle but I doubt that it is corrected.

• I try to remove the system disk error memory dump files clean up, usually around 350 MB but not cleaning cleaning!

  How can I get rid of these files? What do I do? seems to be a waste of space if I don't empty them.

  Hi russellinspain,

  Run the disk cleanup utility should delete these files. You can remove the files if you want to save space on the hard disk.

  Try to delete the files as an administrator. To do this, try the following steps.
  a. Click Start, type disk cleanup, click with the right button on disk cleanup and click Run as administrator.
  b. place a checkmark on "System error memory dump files"
  c. click ok and check if the files are deleted successfully.

  See Delete files using disk cleanup

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I got this error after the test hardware: 4MOT/4/40000002: hand-1194 what is my problem?

  I have an imac 27 inches, and stops randomly got on it when I opened the games for example. I have managed a test equipment and had this error. Have someone at - he heard of this?

  Thank you.

  This error indicates a bad fan motor. You must take the computer repair.

• How does the DAQ hardware with data acquisition?

  I'm sampling of 8 channels at 2.5 MHz I I need to know if the DAQmx 6133 I use gets every channel at 2.5 MHz or if she gets every channel (2.5/8) MHz. For example if I had a channel it can get up to 2.5 MHz, but if I get 8 channels, this channel will get samples in high 312, 5 kHz (= 2.5 / 8 MHz).

  Can someone help me out here?

  Thank you

  Rafael

  Hello Rafael,.

  The NI 6133 is a module for simultaneous sampling.  This means that there is an NOC for each channel on the device.   If you look at the Specifications for the 6133 OR you can see that the maximum sampling frequency is specified as 2.5 MS/second. There is one by the channel for this device specification.  Thus, you can enjoy all 8 channels at 2.5 MS per second instead of having to use the overall rate of 2.5/8 MS/second when acquiring on all channels.

• Block access to the DAQ hardware

  Hello everyone

  I develop a labview application using USB cDAQ 9174 and I want to block access to my material, so the only way to use the material is through my labview application. Is there a tool or a way to protect the material?

  I am concerned about someone installing a new application in my system and can then use my DAQ for new application installed.
  In my view, which can be prevented by setting permissions in windows.

• -You also get an invalid identifier error when executing this query sql for a data model, but not in TOAD/SQL Developer?

  Hello OTN.

  I don't understand why my sql query will pass by in the data model of the BI Publisher. I created a new data model, chose the data source and type of Standard SQL = SQL. I tried several databases and all the same error in BI Publisher, but the application works well in TOAD / SQL Developer. So, I think it might be something with my case so I'm tender hand to you to try and let me know if you get the same result as me.

  The query is:

  SELECT to_char (to_date ('15-' |)) TO_CHAR(:P_MONTH) | » -'|| (To_char(:P_YEAR), "YYYY-DD-MONTH") - 90, "YYYYMM") as yrmth FROM DUAL

  
  

  Values of the variable:
  

  : P_MONTH = APRIL

  : P_YEAR = 2015

  I tried multiple variations and not had much luck. Here are the other options I've tried:

  WITH DATES AS

  (

  Select TO_NUMBER (decode (: P_MONTH, 'JANUARY', '01',))

  'FEBRUARY', '02',.

  'MARCH', '03'.

  'APRIL', '04'

  'MAY', '05'.

  'JUNE', '06'.

  'JULY', '07',.

  'AUGUST', '08'.

  'SEPTEMBER', '09'.

  'OCTOBER', '10',.

  'NOVEMBER', '11'.

  "DECEMBER", "12."

  '01')) as mth_nbr

  of the double

  )

  SELECT to_char (to_date ('15-' |)) MTH_NBR | » -'|| (TO_CHAR(:P_YEAR), 'DD-MM-YYYY') - 90, "YYYYMM")

  OF DATES

  SELECT to_char (to_date ('15-' |: P_MONTH |)) » -'|| ((: P_YEAR, 'MONTH-DD-YYYY')-90, "YYYYMM") as yrmth FROM DUAL

  I'm running out of ideas and I don't know why it does not work. If anyone has any suggestions or ideas, please let me know. I always mark answers correct and useful in my thread and I appreciate all your help.

  Best regards

  -Konrad

  So I thought to it. It seems that there is a bug/lag between the guest screen that appears when you enter SQL in the data model and parameter values, to at model/value data.

  Here's how I solved my problem.

  I have created a new data model and first created all my settings required in the data model (including the default values without quotes, i.e. APRIL instead "Of APRIL") and then saved.

  Then I stuck my sql query in the data model and when I clicked ok, I entered my string values in the message box with single quotes (i.e. "in APRIL' instead of APRIL)

  After entering the values of string with single quotes in the dialog box, I was able to retrieve the columns in the data model and save.

  In the data tab, is no longer, I had to enter the values in single quotes, but entered values normally instead, and the code worked.

  It seems the box prompted to bind the values of the variables when the SQL text in a data model expects strings to be wrapped in single quotes, but no where else. It's a big headache for me, but I'm glad that I solved it, and I hope this can be of help to other institutions.

  See you soon.

• Button element to open a pop up window but not make a shipment

  Hello
  
  I want to open a popup using a button located next to an item. I don't want a shipment to occur.
  I followed the instructions given in want the button element to call the window and the popup is displayed correctly.
  However, it is also a shipment.
  How do I prevent present it when this button is pressed?

  I copied models button, called "Javascript button" and changed its code to:

  
  
  #LABEL#
  
  
  

  TO:

  
  
  #LABEL#
  
  
  

  where "AAAAA" is "javascript: #BUTTON_ATTRIBUTES #" (the tag didn't work so I had to describe it in this way).

  I then put the script I want to run the application in the attributes of the button and the fact no matter what. It's not very elegant, but it does not work.