Error trying to deploy a virtual machine from a template

Similar Questions

• How to create a virtual machine from a template?

  Hello

  I created a model of virtual machine with a virtual computer on an ESX Server. I want to use this model to create more virtual machines on different ESX servers. How can I do this?

  Thank you

  Tejas

  In your Virtual Center client in the left upper corner click the inventory button and choose 'Models and Virtual Machines' this will display your virtual machines as well as the underneather of models in the window of the host tree.  Right-click on the template and select deploy the virtual machine from this template and it will start the wizard.

• Deploy a new virtual machine from a template

  Is there a workflow avaiable to deploy a new virtual machine from a template?  I tried using the Clone Virtual Machine, no workflow customization but receive an error saying, "task"CloneVM_Task"error: a specified parameter was not correct."
  "Spec.Location.pool (name of the dynamic Script Module: vim3WaitTaskEnd #20).

  When I use a template as a source of VM.

  I can't find any documents pointing to the deployment of the model.

  Hello

  It's the right workflow, but you must provide a pool of valuable resources for this workflow. If you do not resource pools, it can be shown in a vCO to root in the inventory (vCenter does not work).

  Christophe.

• Trying to copy a virtual machine from one server to another

  Hi all

  I'm new to ESXi 4, although I used VMWare Workstation for years.  I am trying to copy a virtual machine from a Windows system (Sysprep) from one host to another.  The two hosts are identical systems with the exact same ESXi host configuration.  Same hw, same version of ESXi, same setup, same size of the partition.

  When I use the Vsphere data store browse to 'download' the vmdk and vmx files to a local drive (Windows Server 2003), I get the following 3 files: the same vmx file, a tiny vmdk file and a file huge filename - flat hard.  The file vmdk on browser to store data from the source host is about 23 GB.  The flat on the local system vmdk file is almost 63 GB.

  Can I reopen Vsphere on the destination server and "load" the 3 files in a directory that I created in the data store.  Once there, I use the browser "Add to inventory."  When I try to turn on the virtual machine, I get the error message "not enough space on the data store."

  Any ideas of what I could have done wrong?  Again the data store configuration is identical:

  Local disk to VMware: 62.95 GB, Total formatted capacity: 62,75 GB.  1 VMFS 3.33 MB block size it's the only VM on the system.

  Thanks in advance,

  Mark

  What you see is by design.

  When you try to copy a disc loaded end service, with the browser data store or FastSCP, the virtual disk will be inflated. Use the converter such as recommended by AlbertWT.

  Since the virtual disks of destination must already 60 GB of disk space you may not able to power on the virtual machine, because there is not enough disk space for the swap file, which is the size of the configured RAM (less reserve, if necessary).

  André

• Create virtual machines from a template

  Hello

  I'm trying to deploy virtual machines from a template, and then select a specific LUN in my cluster data store. How the code below can be changed to achieve this?

  Thank you

  $VMs = get-Content "VmNames.txt".

  $SourceTemp = "WIn2k08-R2.

  $DsCluster = "DS-Cluster01".

  $Folder = "Win2K08".

  {Foreach ($VM to $VMs)

  New-VM-name $VMs - model $SourceTemp - $DsCluster - $folder location data store

  }

  Do you mean a specific data store of this datastorecluster?

  If so, you can just pass the datastorename on the parameter data store

• Deploy multiple virtual machines from one model to the help of customization of the OS and a text file for hostname and IP

  Hi all

  Not sure if this has already been answered, I did a search on the forums, but couldn't find an answer to what I'm looking for.

  I want to fully automate the deployment of multiple VMs of a model using a customization file, but also to retrieve the host names and IP addresses from a text file / spreadsheet.

  for example:

  I need to deploy a test environment of 30 virtual machines using the template file and customizing TestVM. I have a spreadsheet with the VM host names and IP addresses. The process now is to manually enter the host name and IP when the customization file invites to do while deploying them in each virtual machine. The customization file takes care of the rest (license key, admin password, add to the domain etc.) can I automate entry of the name of host and IP addresses in reading from a text file?

  Thanks in advance!

  Take a look on the deployment, customization and modification of virtual machines to a csv file

  There are many more examples of this community on the same subject,

• Error trying to clone a virtual machine

  Hello

  I'm trying to use the vsphere api 5.0 to clone a virtual machine that was created in the web client.

  Here is my XML SOAP message:

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < SOAP-SOAP ENV:Envelope - ENV:encodingStyle = ' http://schemas.xmlsoap.org/SOAP/encoding/ "xmlns:SOAP - ENV =" " http://schemas.xmlsoap.org/SOAP/envelope/ "container =" " http://www.w3.org/2001/XMLSchema "" xmlns: xsi = " " http://www.w3.org/2001/XMLSchema-instance "xmlns:SOAP - ENC =" " http://schemas.xmlsoap.org/SOAP/encoding/ ">

  < SOAP - ENV:Body >

  < CloneVM_Task xmlns = "urn: vim25" >

  < _this type = 'VirtualMachine' > vm-xxxxx < / _this >

  < folder > datacenter-xxxxx < / case >

  < name > clone-test-1 < / name >

  < spec >

  < location >

  store of data <>data store - xxxxx < / datastore >

  resgroup-xxxxx < pool > < / pool >

  < / location >

  false < template > < / template >

  false < powerOn > < / powerOn >

  < / spec >

  < / CloneVM_Task >

  < / SOAP - ENV:Body >

  < / SOAP - ENV:Envelope >

  but I get the error "the application refers to an unexpected or unknown type".

  Here is the entire response in a table:

  {Array (15)}

  'key' = >

  String(11) "task-xxxxxxx".

  "task" = >

  String(11) "task-xxxxxxx".

  'name' = >

  (12) a string "CloneVM_Task".

  'descriptionId' = >

  (20) a string "VirtualMachine.clone".

  'entity' = >

  String (8) "vm-xxxxx".

  "entityName" = >

  (8) a string 'xxxxxx '.

  'State' = >

  String(5) "error".

  'cancelled' = >

  String(5) "false."

  'Cancel' = >

  (4) a string 'true '.

  'error' = >

  {Array (2)}

  'fault' = >

  {Array (1)}

  "argument" = >

  (22) a string "ManagedObjectReference".

  }

  'localizedMessage' = >

  String (52) "request refers to an unexpected or unknown type."

  }

  'reason' = >

  {Array (1)}

  'userName' = >

  String (10) "myusername".

  }

  'queueTime' = >

  (26) string "xxxx".

  "startTime" = >

  (27) string "xxxx".

  'completeTime' = >

  (26) string "xxxx".

  'eventChainId' = >

  String (7) 'xxxxxxx '.

  }

  Thanks in advance for any help, it will be greatly appreciated!

  Yes, login and vcenter.

  Thanks for trying to help, but I managed to solve it.  It turns out that it was

  1. I was providing the setting wrong folder (should have been the result of FindByInventoryPath('your_data_center_name/vm') instead of FindByInventoryPath ('your_data_center_name')

  2. I didn't need to provide anything inside the 'location' parameter, it comes to be present

  Thank you again and hope that the above comments help someone else trying to do the same thing

• How to change the size of virtual machine from a template installation disc.

  Dear team

  How to change the size of the disk when installing VM from a template? I'm on ESX 4.0 Vcenter 4.0

  Concerning

  Shamal

  I don't know if this is possible, you may need to deploy the machine first, then use the VMware Converter or vDisk settings in the properties of the virtual machine.

  The converter is in charge on the partition, as well as (for Windows clients).

  AWo

  VCP / VMware vEXPERT 2009

• 120 available virtual machines from a template - newbie question

  Hi all -

  I am currently working on a project where I need to create a model W2K8R2 120 VMs.

  Is it possible to automate this process quick and easy 5.1 using Orchestrator?

  I only need automates the process of VM - name. After I created manually assign VLAN and IP on each virtual machine.

  Any suggestions?

  Type r

  Björn.

  Start here: How to deploy VMS of form in Orchestrator template - and follow the link to the additional item at the end of this one. This covers the technical closure to clone several virtual machines to have fun!

• PowerCLI script to deploy virtual machines from a template

  Hey all,.

  I have this part done script. My questions are:

  1. I want to know the nubmber of "Windows XP - X" are currently deployed, so I want to add. I don't want to use a CSV format or any other to inmport of. Yes, I am that lazy. For some reason I can't understand it!

  2. on the line I would askes 'what esx host you want to use' just hit '1' for esx1 vs type the name of the host.

  The questions above can be made? If so HELP! I worked on it for days. Thank you!

  1. Yes I have a Connect-VIServer-Server blah blah blah... Just removed.

  {

  {

  $freespaceCalc = @{name = "FreespaceGB"; Expression = { : tour ($_.)} (FreeSpaceMB * 1 MB/1 GB)}}

  $capacityCalc = @{name = "CapacityGB"; Expression = { : tour ($_.)} (CapacityMB * 1 MB/1 GB)}}

  1. User agents how manny are required

  $agentTotal = Read-Host "Enter the number of Agents WinXp you need."

  $agnetTotal = $agentTotal

  Get-Datastore. Select Name, $freespaceCalc, $capacityCalc | Sort-Object Name. FT - force - AutoSize. Out-Default

  $datastore = Read-Host "what data store you want to use?

  Get-VMHost | Select-Object Name. Sort name | FT - force - AutoSize. Out-Default

  $esxHost = Read-Host "what Esx host you want to use?

  $XP is get - VM - name WinXP-*.

  $totalXPCount = @($XP). Length

  $totalXP = (1 + $totalXPCount)

  for ($adt = ($totalXP + $agentTotal); $totalXP - $adt lt; $totalXP ++) {}

  If ($totalXPCount - eq $adt)

  {

  breaking

  }

  $machineName = "WinXP-$totalXPCount.

  $template = "Template XP-32.

  $osspec = get-OSCustomizationSpec XP

  foreach ($vm to $machineName)

  {$vm = New - VM - name $vm - model $template - host $esxHost - store of data $datastore - OSCustomizationSpec $osspec | start-vm}

  }

  The $hostIndex variable contains the index in the table $hostList of the selected host.

  This is the script has been fixed.

  Note that the SW forum has problems with hooks for you better use the attached file.

  # Current "** Create Win XP **";
  $freespaceCalc = @{ Name = "FreespaceGB"; Expression = { [Math]::Round($_.FreeSpaceMB * 1MB / 1GB ) } }
  $capacityCalc = @{ Name = "CapacityGB"; Expression = { [Math]::Round($_.CapacityMB * 1MB / 1GB) } }
  
  # User enters how manny agents are requred
  $agentTotal = [int](Read-Host "Enter how many WinXp Agents you need.")
  
  $totalXPCount = (Get-VM -Name WinXP-* | Measure-Object).Count
  if($totalXPCount -lt $agentTotal){
       for($adt = $totalXPCount + 1; $adt -le $agentTotal; $adt++){
  
            Get-Datastore | Select Name, $freespaceCalc, $capacityCalc |Sort-Object Name | ft -Force -AutoSize| Out-Default
            $datastore = Read-Host "What DataStore do you want to use?"
  
            $hostList = Get-VmHost | select Name | Sort-Object
            $i = 1
            $hostList | % {Write-Host $i ":" $_.Name; $i++}
            $hostIndex = Read-Host "Enter a number (1 -" $hostList.Count ")"
            Write-Host "You selected host" $hostIndex "with hostname" $hostList[$hostIndex - 1].Name
  
            $machineName = "WinXP-$adt"
            $template = "XP-32 Template"
            $osspec = Get-OSCustomizationSpec XP
  
            foreach ($vm in $machineName){
                 $vm = New-VM -Name $machineName -Template $template -Host $hostList[$hostIndex - 1].Name -Datastore $datastore -OSCustomizationSpec $osspec |start-vm }
       }
  }
  

• Deploy multiple virtual machines simultaneously

  Hello

  I'm trying to deploy multiple virtual machines at the same time using powercli.  I think I have has the switch - RunAsynch, howerver, this doesn't seem to work, instead of that virtual machines are deployed one at a time.  Here is my code:

  SE connect-VIServer-Server vc1. MYDOMAIN.local - user MYDOMAIN\MYACCOUNT-password MYPASSWORD

  New-vm - vmhost prodh1. MYDOMAIN.local - name of TEST - SVR01 - model W2K8R2SP1 - IOMEGA data store - OSCustomizationspec-W2K8R2SP1-_Tobedeleted location | Start-VM - RunAsync

  New-vm - vmhost prodh1. MYDOMAIN.local - name of TEST - SVR02 - W2K8R2SP1 - IOMEGA data store model - OSCustomizationspec-W2K8R2SP1-_Tobedeleted location | Start-VM - RunAsync

  New-vm - vmhost prodh1. MYDOMAIN.local - name of TEST - SVR03 - W2K8R2SP1 - IOMEGA data store model - OSCustomizationspec-W2K8R2SP1-_Tobedeleted location | Start-VM - RunAsync

  New-vm - vmhost prodh1. MYDOMAIN.local - name of TEST - SVR04 - W2K8R2SP1 - IOMEGA data store model - OSCustomizationspec-W2K8R2SP1-_Tobedeleted location | Start-VM - RunAsync

  Start-Sleep - seconds 300

  Get - vm "TEST-SVR01 | Get-VMGuestNetworkInterface Guestuser - administrator - GuestPassword "MYPASSWORD" |? {$_.name - eq "Connect to network Local 3"} | Game-vmguestnetworkinterface administrator - Guestuser - GuestPassword "MYPASSWORD" - IPPolicy - 192.168.1.25 static IP - Netmask 255.255.255.0 - Gateway 192.168.1.1 DNS - 192.168.1.2,192.168.1.3 - RunAsync

  Get - vm "TEST-SVR02 | Get-VMGuestNetworkInterface Guestuser - administrator - GuestPassword "MYPASSWORD" |? {$_.name - eq "Connect to network Local 3"} | Game-vmguestnetworkinterface administrator - Guestuser - GuestPassword "MYPASSWORD" - IPPolicy - 192.168.1.25 static IP - Netmask 255.255.255.0 - Gateway 192.168.1.1 DNS - 192.168.1.2,192.168.1.3 - RunAsync

  Get - vm "TEST-SVR03 | Get-VMGuestNetworkInterface Guestuser - administrator - GuestPassword "MYPASSWORD" |? {$_.name - eq "Connect to network Local 3"} | Game-vmguestnetworkinterface administrator - Guestuser - GuestPassword "MYPASSWORD" - IPPolicy - 192.168.1.25 static IP - Netmask 255.255.255.0 - Gateway 192.168.1.1 DNS - 192.168.1.2,192.168.1.3 - RunAsync

  Get - vm "TEST-SVR04 | Get-VMGuestNetworkInterface Guestuser - administrator - GuestPassword "MYPASSWORD" |? {$_.name - eq "Connect to network Local 3"} | Game-vmguestnetworkinterface administrator - Guestuser - GuestPassword "MYPASSWORD" - IPPolicy - 192.168.1.25 static IP - Netmask 255.255.255.0 - Gateway 192.168.1.1 DNS - 192.168.1.2,192.168.1.3 - RunAsync

  Get-NetworkAdapter "TEST-SVR01 | Together-NetworkAdapter - NetworkName VM1-confirm: $false

  Get-NetworkAdapter "TEST-SVR02 | Together-NetworkAdapter - NetworkName VM1-confirm: $false

  Get-NetworkAdapter "TEST-SVR03 | Together-NetworkAdapter - NetworkName VM1-confirm: $false

  Get-NetworkAdapter "TEST-SVR04 | Together-NetworkAdapter - NetworkName VM1-confirm: $false

  If anyone can help?

  Thank you

  Duncan.

  Yes, you are right.

  By specifying the param -VM (Get - VM $modelVM) , you create the new virtual machine from an existing one.

  Just change the cmdlet New - VM settings according to your needs and let the VM - far.

  It creates your virtual machines based on a template and specification of customization.

  $esxName = "prodh1.MYDOMAIN.local"
  $template = "W2K8R2SP1"
  $datastore = "IOMEGA"
  $newVmList = "TEST-SRV01", "TEST-SRV02", "TEST-SRV03", "TEST-SRV04"
  $custSpec = "W2K8R2SP1"
  $location = "_Tobedeleted"
  $taskTab = @{}
  
  # Create all the VMs specified in $newVmList
  foreach($Name in $newVmList) {
       $taskTab[(New-VM -Name $Name -VMHost (Get-VMHost -Name $esxName) -Template $template -Datastore $datastore -OSCustomizationSpec $custSpec -Location $location -RunAsync).Id] = $Name
  }
  

  Of course, you can write it as before. You will need to only change the $newVmList variable in the original script.

  foreach($Name in $newVmList) {
       $taskTab[(New-VM -Name $Name -VMHost "prodh1.MYDOMAIN.local" -Template" W2K8R2SP1" -Datastore" IOMEGA" -OSCustomizationSpec "W2K8R2SP1" -Location "_Tobedeleted" -RunAsync).Id] = $Name
  }
  

  You will also need to insert the remaining part with the while loop and the customizations in your network!

  http://www.lucd.info/2010/02/21/about-async-tasks-the-get-task-cmdlet-and-a-hash-table/

  Concerning

  Emanuel

• Perl script for deploying a virtual machine template

  Am looking for a perl script for the deployment of the existing models on Vsphere virtual computer. So far, I got access to the virtual machine. I saw that there is a utility called new-vm on the powershell. I'm running a linux machine and therefore seeking an alternative to perl. Kindly give me pointers or help me with some documents.

  Thank you!

  Well, I managed to create a virtual machine from the template using the vmclone.pl script, which is part of the vmware sdk. But post creation that he's not leaving means VM State is off. I'll have to find a way to start the virtual machine as well.

• Tips to get a Vista model to successfully deploy a virtual machine?

  I'm under ESX 3.5.0 with VC 2.5.

  I have a Vista VM, which was created using an image that I've created (unfortunately). I was able to correctly create the virtual computer, add it to the domain, configure everything, etc. I converted to a template and attempted to deploy a new virtual machine from this model. He created the virtual machine, but seems to have not successfully completed the sysprep process or what that Vista is called these days. I would like to know if there is anything special I need to do to make this work. I am currently trying to create a second VM just to make sure that I did something wrong the first time. It is my understanding that with Vista, I cannot copy the sysprep on this exact VC, is - server files? I created a customization specification using the same process I did for my XP specifications that has never failed me. The error I get is attached. It seems that it is looking for an unattend.xml file. So, who were on the image sent to me by corporate? Any help would be greatly appreciated. Thanks in advance.

  The second attempt at cloning a virtual machine has as well. He came to the final stage of the customization and failed with the same error the file attached. She then lifts upwards a pop-up window saying "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »

  Process sysprep for Vista is completely different from XP.  You must use the windows system image manager to create the answer file, more details are here on TechNet:

  http://TechNet.Microsoft.com/en-us/library/cc721929.aspx

• Virtual machine from Windows XP to Windows 7 Professional

  Two years ago the virtual machine from Windows XP was installed on my laptop which has Windows 7 Professional.  I use version XP for playing games is not compatible on Windows 7.  Everything worked well until a few weeks ago.  I was unable to open the games.  An error message window is displayed when I click to start the game.  "C:\WINDOWS\SYSTEM32\CONFIG. NT.  The file system not suitable for running MS-DOS and Microsoft Windows applications.  Choose 'Close' to terminate the application. "The top border of the window says error message"16 bit Windows subsystem.   Any ideas.

  After temporarily off any protection, I tried restore and recovery without success.  Error message says that both failed.

  Please keep in mind that I'm completely computer illiterate.  Thank you.

  Hello Willias,

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Thank you

• Oracle Jdeveloper error on Oracle Bigdata Lite Virtual Machine

  Hi all

  I use large data Oracle lite virtual machine from the following link: Oracle Big Data VM Lite.

  I'm trying to practice the tutorial on the following link: http://www.oracle.com/technetwork/topics/bigdata/articles/intro-to-oracle-nosql-db-hol-1937059.pdf.

  When I try to run the MoviePlex project in Oracle Jdeveloper, who in turn calls Weblogic server and triggers the following error during the creation of the Weblogic domain:

  [Waiting for the field to complete the construction...]

  [08: 41:11] Creation of integrated Weblogic domain...

  [08: 41:39] integrated Weblogic domain completed successfully.

  Using the 7101 port *.

  / Home/Oracle /. JDeveloper/system11.1.1.6.38.61.92/defaultdomain/bin/startWebLogic.sh

  [waiting for the server to complete its initialization...]

  .

  .

  Arguments of memory in JAVA:-Xms512m-Xmx512m

  .

  Start mode of WLS = development

  .

  CLASSPATH=/u01/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/Middleware/patch_jdev1111/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java/latest/lib/tools.jar:/u01/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/u01/Middleware/wlserver_10.3/server/lib/weblogic.jar:/u01/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/u01/Middleware/wlserver_10.3/server/lib/webservices.jar:/u01/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/u01/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/u01/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/ U01/middleware/wlserver_10.3/server/lib/XQRL.jar::/U01/connectors/OLH/jlib/*:/usr/lib/Hadoop/*:/usr/lib/Hadoop/client/*:/U01/NoSQL/kV-EE/lib/kvstore.jar:.

  .

  Unrecognized option:-jrockit

  PATH=/u01/Middleware/wlserver_10.3/server/bin:/u01/Middleware/modules/org.apache.ant_1.7.1/bin:/usr/java/latest/jre/bin:/usr/java/latest/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/usr/lib64/R/bin:/u01/Middleware/jdeveloper/jdev/bin:/usr/java/latest/bin:/home/oracle/bin:/u01/app/oracle/product/12.1.0/dbhome_1/bin:/home/oracle/scripts:/opt/bin:/home/oracle/bin

  .

  ***************************************************

  * To start WebLogic Server, use a username and *.

  * password assigned to an administrator-level user.  For *.

  * server administration, using the WebLogic Server *.

  * console in http://hostname/ReportServer: port/console         *

  ***************************************************

  from weblogic with the Java version:

  WLS starting with line:

  jrockit - /usr/java/latest/bin/Java-Xms512m-Xmx512m-Dweblogic.Name=DefaultServer-Djava.security.policy=/u01/Middleware/wlserver_10.3/server/lib/weblogic.policy-Djavax.net.ssl.trustStore=/u01/Middleware/wlserver_10.3/server/lib/DemoTrust.jks-Dweblogic.nodemanager.ServiceEnabled=true - Xverify : aucun-da-Dplatform.home=/u01/Middleware/wlserver_10.3-Dwls.home=/u01/Middleware/wlserver_10.3/server-Dweblogic.home=/u01/Middleware/wlserver_10.3/server-Djps.app.credential.overwrite.allowed=true-Dweblogic.management.discover=true-Dwlw.iterativeDev=-Dwlw.testConsole=-Dwlw.logErrorsToConsole=-Dweblogic.ext.dirs=/u01/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/u01/Middleware/patch_jdev1111/profiles/default/sysext_manifest_classpath weblogic. Server

  Error: Could not create the Virtual Machine Java.

  Error: A fatal error has occurred. Program ends.

  Unrecognized option:-jrockit

  Error: Could not create the Virtual Machine Java.

  Error: A fatal error has occurred. Program ends.

  Process is complete.

  The version of JRE installed on the virtual computer is as below:

  [oracle@bigdatalite ~] java $-version

  Java version "1.7.0_51".

  Java (TM) SE Runtime Environment (build 1.7.0_51 - b13)

  Java for 64-bit Server VM (build 24.51 - b03, mixed mode)

  [oracle@bigdatalite ~] $

  I searched on Google but also OTN but found no solution.

  Can anyone already encountered the same problem or can help, it will be highly appreciated.

  Thank you

  Bilal

  Hi Bilal,

  You can try to change the folder to remove the parameter Jrocket below...

  concerning

  Keith

  File: /home/oracle/.jdeveloper/system11.1.1.6.38.61.92/DefaultDomain/bin/setDomainEnv.sh

  Add:

  # Clearing JAVA_VM - Difficulty to remove the setting of jrockit
  JAVA_VM =""

  just before:

  If ["${JAVA_VENDOR}"! = "BEA"]; then
  JAVA_VM = "${JAVA_VM} ${JAVA_DEBUG} ${JAVA_PROFILE}".
  export JAVA_VM
  on the other
  JAVA_VM = "${JAVA_VM} ${JAVA_DEBUG} ${JAVA_PROFILE}".
  export JAVA_VM
  FI