Error: unable to contact IP driver, code 2 error unable to connect to the internet.

Original title: failed to contact the driver of the intellectual property, the error code 2.

Using XP Pro SP3 with MSE, I got, perhaps, AV Protection 2011 virus. After cleaning, I couldn't connect to internet... Internet access icon showed I was connected, but I was unable to connect to any site. On startup, I got the error that spampal is unable to use port 110 and this that I solved it by uninstalling Spampal. As a result, I now get 'unable to contact driver ip, code 2 error '. Device Manager will not display any errors.

I did reset winsock.

IPCONFIG/all reports ~ an internal error: the request is not supported.
Contact the Services de Support technique Microsoft for assistance.
Additional information: host name of request impossible.

Are there instructions to resolve intellectual property issues or should I do a system recovery?

I thought that MicroSoft offers no support virus of cost recovery. Which would include management of this problem?

Follow-up... I found some good suggestions that I'll try to Jack MVP and Molly Mae found at the related link ~ thank you

Loss of the internet wireless connection, do not seem to have an ip address now, need help!

Error code 2 is BACK to talk about 'file not found '.

If you see this:

Windows IP configuration

An internal error has occurred: the request is not supported.
 
Contact the Services de Support technique Microsoft for assistance.

Additional information: host name of request impossible.

Take a look in the folder c:\windows\system32\drivers for this file (assuming that XP is installed on your C drive):

Tcpip.sys

If the file is missing, you must replace it.

We know that XP likes to keep the backup copies of critical system files in this folder:

c:\Windows\System32\dllcache

Look there for a backup copy of the file tcpip.sys and paste in the c:\windows\system32\drivers folder where it belongs.

If you do not see a copy in the dllcache folder, search for a copy here:

c:\windows\ServicePackFiles\i386

If you do not see here, you can download it from my SkyDrive and network disks exceeds the system afflicted on a USB or floppy drive.

I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

c:\Windows\System32
c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

Here is the link to my SkyDrive and you can get the file you need here:

http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called tcpip when the name of the file should really be called tcpip.sys (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

You then put the downloaded files in the correct folders on your system.

Tags: Windows

Similar Questions

  • Missing error driver unable to connect to the Internet

    Original title: I deleted a driver

    I deleted a driver for my Wi - Fi accidentally when I was manually cleaning the hard drive. When I try to connect to the internet the computer says missing a driver. any suggestions or guidance on how to reinstall?

    Hello

    What is the brand and model of the computer?

    Method 1:

    If you are unable to connect to the Internet via the wireless connection, you can switch to a wired connection to download the driver or to download the driver on another computer.

    Driver can also installed from driver disk provided by the manufacturer of the computer.

    Method 2:

    You can also perform a system restore to the date when the computer was working fine and check.

    What is system restore?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    System Restore: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    Important: Restore the system affect the system files of Windows, programs and settings of register that have been changed recently. It can also make changes to scripts, files, batch and other types of executable files on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file.

    Method 3:

    I suggest you visit the manufacturer's Web site and download and install the latest wireless drivers or if you use the link give and check if it helps.

    Tips for solving common driver problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

    Hope this helps and keep us posted.

  • Unable to connect to the internet ERROR 678

    original title: Please help me because I get ERROR 678 frequently

    I use a broadband connection on my desktop pc with windows XP SP3, as I tried to connect through windows running phone 7 ultimate, but I was unable to connect to the internet, now even once, I plugged the cable broadband for desktop pc and now I get ERROR 678 , after several attempts to recall that I am able to connect through desktop pc. I have met it 2nd time to do the same procedure for the first time he resolved automatically, but now there's a problem. also contacted the service provider as their laptop to connect to internet with my account but I can't my pc... HELP ME PLEASE...

    Hi Aniketpawar,

    ·         What security software is installed on your computer?

    I suggest you to follow the steps in the Microsoft Knowledge Base article and check.

    You may receive error 678 or error 769 when you try to connect to the Internet or when you try to browse the Internet after you install Windows XP Service Pack 2

     http://support.Microsoft.com/kb/892889

    Let us know if that helps.

  • After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

    original title: NETBios TCPIP of missing in Device Manager

    I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7000

    Date: 16/01/2012

    Time: 12:31:17

    User:                       N/A

    Computer: JARRIOUSSTUDIO

    Description:

    The NetBios over TCP/IP service failed to start due to the following error:

    The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7001

    Date: 16/01/2012

    Time: 12:31:17

    User:                       N/A

    Computer: JARRIOUSSTUDIO

    Description:

    The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

    The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7001

    Date: 16/01/2012

    Time: 13:32:01

    User:                       N/A

    Computer: JARRIOUSSTUDIO

    Description:

    The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

    A device attached to the system does not work.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7001

    Date: 16/01/2012

    Time: 13:32:01

    User:                       N/A

    Computer: JARRIOUSSTUDIO

    Description:

    The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

    A device attached to the system does not work.

    When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

    Hi Diddy Dell,

    Follow these methods.

    Method 1: Performs a search using the Microsoft safety scanner.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 3: Follow the steps in the article.

    How to reset the Protocol Internet (TCP/IP)

    http://support.Microsoft.com/kb/299357

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • error 815 unable to connect to the internet, I have

    I am receiving messages saying error 815 cannot connect to the internet, but I am connected. I can surf what I want but these messages keep covering my page so I'm not able to see what Iam do. My server says that everything is ok their end and communicate with microsoft. Help

    Hello
     
    1. don't you make changes to the computer before the show?
    2. what browser you use to access the internet?
    3. the problem occurs with another web browser?
    4. do you have the internet connection wired or wireless?
     
    The 815 error code means that the network connection to broadband could not be established on your computer because the remote server is not responding. This could be caused by an invalid value for the 'Service name' field for this connection.
     
    I suggest to create a new administrator account on the Windows Vista-based computer to solve the problem:
    Steps to follow:
    a. click Start, type the user accountand click on the user accounts Control Panel.
    b. in the user account control panel, click on account manager another .
    c. click on create a new account, type an account name, select administrator, and then click create an account .
    d. disconnection and connection with the new account and establish the connection to check if the problem persists.
     
    I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.
  • Unable to connect to the Internet, receive error message: DEBUGER END WIRE.

    Original title: unable to connect to the Internet

    Hello

    I am using Dell inspiron 1525 with Win.Vista Home Premium 32 bit

    When I connect to internet I displays message DEBUGER CANCEL THREAD

    There is no driver problem

    Someone help me

    I thank & regard

    Satish Baker

    Hi Sissi,

     

    1. you are using a wired or wireless?

    2. do you and changes to the network card or manually change all the settings?

    3 when was the last time it worked?

    4. are you tring to set up internet connection in windows vista for the first time?

    Please follow the links below to solve the problem.

     

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

     

    See also this: the problems of Internet connection

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

     

    I hope this helps!

  • Unable to connect to the Internet, the error message "Cisco AnyConnect VPN agent service is not responding. Please restart this application after a minute"

    Original title: unable to connect to the internet

    Whenever I connect to my computer and get it on my desk, it goes on to say that Cisco AnyConnect VPN Service not available. How can I fix? I am not connected to the internet and I can't connect to the internet as well. He said also Cisco AnyConnect VPN service agent is not an answer. Please restart this application after a minute. Also, I can't use my firewall for some reason, if I try to allow its loading and the greenbar's going that far - then stops and says that there is an error. I forgot where I tried to activate.

    Oh thanks for the help but I fix it myself. I just did a system restore to a month before

  • Unable to connect wireless, error - could not connect to the internet

    Original Title - connect wirerlessly

    I can't connect to the internet via my wireless router? When I check the availability of networks, the signal is as strong as it gets. However, as soon as I log in, the force goes to far and he says: "Unable to connect to the internet" the distance between the router and (computer) is from 25' to 30'. Any help be greatly appreciated. Thanks in advance

    Hello

    As a first step put the computer near the router and start with the security off the coast.
    When it works, take it back to the final spot. If it stops then working, then you have a problem of distance.

    In general

    My wireless is not working - http://www.ezlan.net/wireless.html

    Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

    Wireless Security - http://www.ezlan.net/Wireless_Security.html

    Extending remote - http://www.ezlan.net/Distance.html

    Wireless modes - http://www.ezlan.net/Wireless_Modes.html

    Wireless bridging - http://www.ezlan.net/bridging.html

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Vista PC is offline, unable to connect to the Internet by LAN or wireless.

    Original title: Vista (Japanese OS)

    My Vista pc is offline (unable to connect to the internet), how install and run the Fixit tool?

    I have read that the English, however, my pc is in Japanese. I can't connect to the Internet by LAN or wireless.
    How can I get the Fixit tool to work on the said pc?
    Help, please!

    Hello

    1. what Fixit tool you try to run?

    2. what exactly happens when you try to connect to the Internet? You receive messages or error codes?

    You can read the following article and check if it helps:

    Windows wireless and wired network connection problems

    You can also read the following article to change the display language:

    Change the display language

    You can use another computer to download the Fix from Microsoft, then use portable storage such as a USB drive, CD, DVD, etc., to carry the Microsoft fix it on your computer.

  • Satellite Pro A10 - WXP re-installed and unable to connect to the internet

    Please help me... I have re-installed Windows XP Home... and now unable to connect to the internet... have also not more of her!
    I went into the Device Manager... in 'other devices' - and it is yellow? mark beside...
    1 / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video...
    They all say "drivers for it are not installed. .... Also, went to "system devices" and find 9 other things that no longer have the drivers installed... said there is also no "audio device" installed!

    My laptop is completely exhausted, or it is better to try to resolve this issue. I'm a fool when it comes to stuff like that... so be gentle with me... what I need to find all the individual drivers and re - install...? BTW... There is no wireless card in the back... (Already checked)...

    Would appreciate any help...
    Thank you

    Hello

    Satellite A10 is a little older model laptop and you can find the drivers in * archives *. go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

    Archive-online Satellite Pro-online Satellite Pro A series-online Satellite Pro A10

    > / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video

    Download and install: 1) Lan Card 4) graph of the card sound 2) 3) Modem driver download also, other drivers if necessary.

  • Satellite Pro L510 - unable to connect to the Internet

    Hi, a newbie on this forum so here goes. I got the "fix Windows 7" virus on my laptop because my virus protection that flows. I downloaded AVG which solved some problems, but still not back to the original values. I reloaded Windows 7, but of course I lost all the software preloaded Toshiba & now cannot connect to the internet (laptop computer purchased through the catch of the day).

    What I need to download software/drivers toshiba etc. to address this problem. Thanks for any input.

    Hello

    > now unable to connect to the internet
    Can you write more than one sentence about your problem?

    Does anyone know how you connect to the Internet via modem, LAN or WLAN? More exactly, what happens if you want to connect, you an error message or probably t can find the router?

    Sorry, but without this information there s no end of discussion

  • Reinstalled XP and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

    Original title: windows xp.

    reinstalled xp and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

    Hello

    Go to the website of your computer manufacturer > drivers download Section > put your computer model number > operating system > Search adapter network, pilots etc. for her.

    Get graphics, sound while you're there.

    You should always do a reinstallation.

    Use the computer that you use to make the foregoing > download and save in this office > copy of Flash Drive > then install in another computer.

    See you soon.

  • Setup is unable to connect to the Internet

    When I try to download and install programs on my desktop, I get an error message indicating that Setup is unable to connect to the internet. How to fix this?

    Hi NardoBailey,

    1. did you of recent changes on the computer?

    2 when was the last time it was working fine?

    3. What is the full error message that you receive?

    4. you receive the error message when you install any program on the computer?

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    See the Microsoft article below and check if it helps.

    How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

    http://support.Microsoft.com/kb/2438651

  • Unable to connect to the Internet / camera Manager.says I am missing drivers

    My computer crashed with virus; I wipe the hard drive around and installed Windows xp home edition. My computer is fine, but I can't get on the internet. The Device Manager has marked these places with problems (see list below) (problem is no driver installed) I'm just figuring that this is where my problem lies (unable to connect to the Internet) can you tell me please what to do to connect to the Internet and where the problem can be

    Device Manager

    Other devices

    Ethernet controller

    Network controller

    Unknown device

    Video controller

    Video controller (vga compatible)

    Go to the manufacturer's site (for whatever the brand / model of your computer is)

    Find the template, then download and install the drivers for those

  • HP ENVY laptop model m7-j020 d: unable to connect to the Internet

    I have a HP ENVY 8.1 Windows running.  No problem until a few days ago, when I couldn't connect to the internet (no e-mail link or a browser).

    Wireless and ethernet connections seem to work. I can connect to the internet via another PC, smart phones, etc.

    E-mail started acting erractically. I tried to restart the computer, and then he started to install updates.  Not sure if she did because it does not connect to the internet.

    Based on the suggestions of another post, I tried: flushing the DNS, reset the battery TCO/IP and resetting the catalog.

    Restart the PC without installation updates has not improved the situation.

    Any help would be greatly appreciated.

    flynkites

    Hello @flynkites,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I read your post about how you are unable to connect to the Internet on your laptop, and I'd be happy to help you in this case!

    Since you've already tried the DNS of hot flashes, to reset the TCP/IP stack and reset the catalog, I advise you to follow the steps described in this document on the resolution of problems in Internet Explorer (Windows 8), as well as resolve and prevent viruses on your computer (Windows 8). This should help you to access your browser and e-mail on your desktop.

    If the problem persists after completing all the steps in the above resources, please contact our technical support by clicking on the link below to get help from your region number.

    www.HP.com/contacthp/

    I hope this helps!

    Concerning

  • I uninstalled mcafee, now unable to connect to the Internet.

    I uninstalled mcafeenow unable to connect to the Internet. Error messages (unidentified network) (investigating problems of modem router or broadband) (connection to the network Local is not valid ip configuration have uninstalled mcafee, now unable to connect to the Internet. Error messages (unidentified network) (investigating problems of modem router or broadband) (connection to the Local network does not have a valid ip address configuration)

    If you have not done so before, run the McAfee Consumer products removal tool symptoms not to do are not documented and are supposed to be unpredictable.  You must reinstall your new security application after completing the McAfee removal.

    Then all the least, your symptoms of failure could guide someone to be able to help.

Maybe you are looking for

  • SONY AX33 COMPATIBILITY ISSUE WITH FCP 10.2.3?

    Hello We had read that Sony's XAVCs codec is compatible with FCP X since version 10.2. So we bought a couple of cameras Sony-FDR-AX33 for our company (short films shot in 1080 p). So this morning I tested one of them, fill a 64 GB card with continuou

  • Questions of traction load

    I have a 2 transistor die in a single package as shown below I have 2 questions: 1. How do you Load Pull in MWO under a constant output power? I am using the CONSTPOUT in MWO but do not know if it works. I plan just to do this on a transistor die sin

  • Have HP Pavilion then stop then on entry works

    Hi just bought a HP Pavilion P6 2467efm and the Pavilion 23xi screen. Odd fault that you turn it on and nothing goes well and then if you turn it off and the new everything seems to work. Suggestions people?... JR

  • Combo box point source from excel

    Hi all I was wondering about this one. I have a lot of values to choose from, for example 100 values. And I want it to appear in the drop-down list box, it would be very difficult if I have to put the data in the function "edit item" from the right c

  • Setup KB967044 error; I get the error code 646 in automatic and manual update update fails so

    I tried to install KB967044 for Microsoft Works 9. Like others, I get the error code 646 for the automatic update. I tried to manually install, but installation requires the CD of Microsoft Works. Now, Works has been installed at the factory, and I d