Error "Unable to load the locale of \Program Files\Western Digital SmartWare\Locale files" when right-clicking on any file

Original title:

When right click on any file I get message saying unable to load locale files... .WD smartware closing or something simular message. Help, please

Hello

1. are you using a Western Digital external hard drive?

2. where are these files be found?

3 did you changes to the computer, before the show?

Method 1:

Step 1: Safe Mode

Start your computer in safe mode and check the number.

Start your computer in safe mode

http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

Step 2: Clean boot

If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135

Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

See the following if you are using a Western Digital HDD.

Method 2:

Step 1: Disconnect the external hard drive.

Step 2: Uninstall Western Digital Smartware and check.

Uninstall or change a program

Method 3:

Download and install the latest version of Western Digital Smartware

http://www.wdc.com/wdproducts/wdsmartwareupdate/

Tags: Windows

Similar Questions

  • Connection error: windows cannot load the locally stored profile

    original title: connection error

    Always get following message when trying to connect to my desktop PC

    Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a damaged local profile. If this problem persists, contact your network administrator.

    This looks like a corrupted profile.  Assuming that you can connect with a user with administrator privileges, do one of the following procedures to restore your profile in the shape.  If you are unable to connect, try to connect by using the built-in Administrator account (Ctrl-Alt-Delete struck twice on the login screen, enter the user: administrator, leave blank password unless you have changed at some point)

    "How to restore Windows XP to a previous state"
      <>http://support.Microsoft.com/kb/306084 >
    (works best if you connect with Safe Mode)

    "How to recover damaged Windows XP user profile"
      <>http://support.Microsoft.com/kb/555473 >

    HTH,
    JW

    PS: Alteration of the disc often accompanies this problem.  Don't forget to run a "chkdsk" operation after you recover.

  • CIS API: Run-time code system error; Unable to load the English locale "American."

    Hello

    I am trying to connect to a CS using api cis. with socket connection. I get the below error. I tried changing the settings regional en_US also but no use...

    The content server is on linux, where, as I'm running the java file of windows xp machine.
    The config xml adapter has the entries below


    < name of adapter = default "myadapter" = "true" type = "scs" >
    < config >
    < property name = "version" > 75 < / property >
    < property name = "port" > 4441 < / property >
    < property name = "type" > socket < / property >
    < property name = "Home" > XX. XX. XX.XXX < / property >
    < / config >
    < template="classpath:/META-INF/resources/adapter/adapter-services-scs.jxml"/ beans >
    < / adapter >


    Any help would be very useful... Thanks in advance

    The content server log:
    Error running code system. Failed to retrieve information about the revision. Unable to load locale 'American English '. [Details]

    An error has occurred. The stack trace below shows more information.

    ! csSystemCodeExecutionError! csUnableToGetRevInfo! csLocaleNotFound, English-US
    intradoc.common.ServiceException:! csUnableToGetRevInfo! csLocaleNotFound, English-US
    at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1753)
    at intradoc.server.Service.buildServiceException(Service.java:1997)
    at intradoc.server.Service.createServiceExceptionEx(Service.java:1991)
    at intradoc.server.Service.createServiceException(Service.java:1986)
    at intradoc.server.ServiceHttpImplementor.determineParameterizedLocale(ServiceHttpImplementor.java:607)
    at intradoc.server.ServiceHttpImplementor.initLocale(ServiceHttpImplementor.java:406)
    at intradoc.server.Service.initLocale(Service.java:333)
    at intradoc.server.Service.initDelegatedObjects(Service.java:201)
    at intradoc.server.ServiceManager.processCommand(ServiceManager.java:358)
    at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)

    Error in the console:



    e of the exception: com.stellent.cis.server.api.scs.request.SCSRequestException: Error executing code system.

    com.stellent.cis.client.command.CommandException: com.stellent.cis.server.api.scs.request.SCSRequestException: Error executing code system.

    at com.stellent.cis.server.api.scs.impl.SCSCommand.executeRequest(SCSCommand.java:338)

    at com.stellent.cis.server.api.scs.impl.SCSCommand.execute(SCSCommand.java:222)

    at com.stellent.cis.client.command.impl.services.CommandExecutorService.executeCommand(CommandExecutorService.java:57)

    at com.stellent.cis.client.command.impl.CommandFacade.executeCommand(CommandFacade.java:158)

    at com.stellent.cis.client.command.impl.BaseCommandAPI.invokeCommand(BaseCommandAPI.java:84)

    at com.stellent.cis.client.api.scs.document.information.impl.SCSDocumentInformationAPI.getDocumentInformationByID(SCSDocumentInformationAPI.java:215)

    at com.pg.emfg.ewps.lotus.UploadFilesToUCM.updateMeta(UploadFilesToUCM.java:152)

    at com.pg.emfg.ewps.lotus.UploadFilesToUCM.main(UploadFilesToUCM.java:86)

    Caused by: com.stellent.cis.server.api.scs.request.SCSRequestException: Error executing code system.

    at com.stellent.cis.server.api.scs.request.impl.SCSRequestProcessor.checkBinderForErrors(SCSRequestProcessor.java:349)

    at com.stellent.cis.server.api.scs.request.impl.SCSRequestProcessor.validateResponse(SCSRequestProcessor.java:265)

    at com.stellent.cis.server.api.scs.request.impl.SCSRequestProcessor.processRequest(SCSRequestProcessor.java:117)

    at com.stellent.cis.server.api.scs.request.impl.SCSRequestFilterChain.doRequestFilter(SCSRequestFilterChain.java:61)

    at com.stellent.cis.server.api.scs.request.stream.SCSOptimizedPublishFilter.handleRequest(SCSOptimizedPublishFilter.java:128)

    at com.stellent.cis.server.api.scs.request.impl.SCSRequestFilterChain.doRequestFilter(SCSRequestFilterChain.java:58)

    at com.stellent.cis.server.api.scs.request.stream.SCSOptimizedRetrieveFilter.handleRequest(SCSOptimizedRetrieveFilter.java:250)

    at com.stellent.cis.server.api.scs.request.impl.SCSRequestFilterChain.doRequestFilter(SCSRequestFilterChain.java:58)

    at com.stellent.cis.server.api.scs.request.rewrite.SCSRewriteURLFilter.handleRequest(SCSRewriteURLFilter.java:140)

    at com.stellent.cis.server.api.scs.request.impl.SCSRequestFilterChain.doRequestFilter(SCSRequestFilterChain.java:58)

    at com.stellent.cis.server.api.scs.request.cache.impl.SCSServiceCacheFilter.handleRequest(SCSServiceCacheFilter.java:104)

    at com.stellent.cis.server.api.scs.request.impl.SCSRequestFilterChain.doRequestFilter(SCSRequestFilterChain.java:58)

    at com.stellent.cis.server.api.scs.request.impl.SCSRequestExecutorProxy.execute(SCSRequestExecutorProxy.java:105)

    at com.stellent.cis.server.api.scs.impl.SCSCommand.executeViaProxy(SCSCommand.java:353)

    at com.stellent.cis.server.api.scs.impl.SCSCommand.executeRequest(SCSCommand.java:335)

    ... 7 more

    Hello

    Try added SystemLocale = English-USA in the config.cfg and then restart the content server to which CIS connects to perform a test to see if the problem still persists.

    Thank you
    Srinath

  • Error: Unable to load the Bluetooth stack Service

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    At ran dvcmgmt.msc and tried to update the drivers. Pilots were up-to-date. Still get the above error message. What should I do?

    Windows Ultimate, AVG Firewall, Anti-spyware, anti-virus running.

    Hello

    Hardware devices not detected or does not work - a Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    The problems with Bluetooth devices
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

    Set up a Bluetooth compatible device
    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

    The problems with Bluetooth devices
    http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

    How to set up a Bluetooth connection
    http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

    The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected
    When you click the item
    http://support.Microsoft.com/kb/960531/en-us

    If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

    BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
    devices around you. For each detected Bluetooth device, it displays the following information:
    The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
    Last detection time and more. BluetoothView can also warn when a new Bluetooth device
    is detected, by displaying a balloon in your bar tasks or playing a little beep. http://www.NirSoft.NET/utils/bluetooth_viewer.html

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Have an error unable to load the language file, how can I solve this problem

    I have PC Optimizer error (indicating page language dependent) it stays on all the time.  I am 69 and am at my wits end. Can you help me

    Thank you

    Hello

    Since you are facing a problem with the program other than Microsoft, I suggest you contact the respective support.

    Hope this information is useful.

  • Connection error: unable to load the user profile

    Original title: user account login

    When I try to log on my computer I get the message 'service user profile Service has not logon.  User profile cannot be loaded.   It is my administrater account, sign in.  If I log in with a different account and try to access user profiles accounts, when I invite me for the password and enter the password nothing happens.  What can I do for this?

    I also have Windows Vista.

    When I try to log on my computer I get the message 'service user profile Service has not logon.  User profile cannot be loaded.   It is my administrater account, sign in.  If I log in with a different account and try to access user profiles accounts, when I invite me for the password and enter the password nothing happens.  What can I do for this?

    I also have Windows Vista.

    You haveanother admin account , you can connect?
    If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

    If you don't have another admin account, go into safe mode.
    Here's how to get safe mode:
    Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

    In the window of logon in safe mode...
    1 can connect to your account administrator in safe mode?
    If so, do a restore system first, if no help, run theMicrosoft tutorial support listed below.

    2. If you can't log into your own account, you see another admin next to your account in the logon screen?
    If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new do a first system restore, if not help, run the Microsoft tutorial support listed below.

    If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
    How to do system restore: http://www.vistax64.com/tutorials/76905-system-restore-how.html

    Tutorial from Microsoft support :
    http://support.Microsoft.com/kb/947215
    There are several methods,go through one by one.
    Method 3 has a "fix it for me" application

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • 2519 LabVIEW error could not load the component of PDM file

    Hello

    I have LabVIEW 2014 for Linux and have successfully installed on OpenSUSE 13.1 without any problem.

    The problem I see is with PDM, I placed down and "Open TDMS" followed by "TDMS" close it provided my path to my TMP folder and I see the following error message:

    I searched NI.com and google, and what I keep finding is the problem with cRIO. I use a desktop version of Linux as mentioned above.

    Any help or advice would be greatly appreciated.

    Thank you very much

    Kevin

    This error means that either your PDM installed library (libtdms.so) does not exist or corrupted/out-of-day. On the linux desktop, it should be in/usr/local/natinst/lib (lib64).

    You can have a check on your linux desktop. If there are rerun your installation and make sure that you type 'Yes' when asked to install PDM.

  • MY computer will load the net... My connection is there, but when I try to any page there is a mistake... some help please...

    Internet will not load I keep getting error messages even if I have a network connection the Internet does not connect! and what's an entry point of procedure or can read acvalue, I need help someone


    Hi Kanucdaphne,

    Method 1:

    Follow the instructions below that may help you resolve the issue.

    How to optimize Internet Explorer
    http://support.Microsoft.com/kb/936213

    Warning: Resetting Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

    Method 2:

    If this does not work, follow the instructions below to check the issue in safe mode with networking

    1 turn on the computer or restart the computer
    2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear. If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.
    3. ensure that the safe mode with network option is selected.
    4. press ENTER. The computer then begins to start in safe mode with network.

    If you are able to access the internet in safe mode with network without any problem, then follow the instructions below to perform the clean boot procedure.

    Step 1: Perform a clean boot
    Step 2: Enable half the services
    Step 3: Determine whether the problem returns
    Step 4: Enable half of the startup items
    Step 5: Determine whether the problem returns
    Step 6: Resolve the problem
    Step 7: Reset the computer to start as usual

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135

    After reviewing the issue, put the computer into Normal mode.
    Uninstall or update the program that is causing the problem.

    Please post back and let us know if it helped to solve your problem.

    Kind regards
    KarthiK TP

  • I get an error "unable to load XPCOM. I know that I can reinstall Firefox but how to save my favorites?

    I get an error "unable to load XPCOM. I know that I can reinstall Firefox, but when I went to do that he erased all my favorites that I did a system restore. How to backup my bookmarks?

    Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

    If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.

    • Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.

    Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

    • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
    • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.

    Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.

    If you keep problems also create a new profile.

  • Error message "unable to load the shared library.

    I try to get my programs for school to work, and I get these error message whenever I try to run anything. The last line of the State of deployment is as follows:

    Deployment time get NLVSim and isAcceptedStep.vi IsAcceptedStep.vi and NILVSim get busy with errors on the target and has been closed.

    LabVIEW: Unable to load the shared library NILVSim.*: SIM_GetTimeAndIsAccepted:C. make sure the library is present on the target of RT. Either MAX allows you to install software from OR or FTP to transfer custom RT target libraries.

    I tried everything I can think of to fix this. I checked NEITHER Max and I'm all for date on the software. I reinstalled LabVIEW twice, and I reset my myRIO. My classmates do not experience problems with getting theres to work. I start to lose hope and hope someone might know what the question. Thank you for your help.

    WubaDee,

    NILVSim is part of the LV Control Design and Simulation Module. This one is correctly installed on your Windows development system and you installed it on your myRIO?

    Norbert

  • Get the Error Message: "user profile service service has no logon. Unable to load the user profile"after you remove the Windows Vista administrator account

    Original title: deleted Vista ultima. admin identity and admin authorization password for standard users will not work.

    I inadvertently deleted the admin. identity, I think in Vista Ultima. The photo shows still on the identities, but when I try to open the identity I get the following message, "user profile service service has no logon. User profile cannot be loaded. The admin. password does not work in any of the other identities now, so I can't do updates to most of my programs, such as windows. I can't open the control panel to add and change of identity.

    Hi JBRA47,

    You can consult the following Microsoft KB article and check if it helps to solve the problem:

    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

    http://support.Microsoft.com/kb/947215

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Error "the user profile Service has no logon. Unable to load the user profile.

    Original title: admin user account

    the user profile service service is a not the logon user profile cannot be loaded, this is the error I received - it's my account Admin what should I do to correct this. I have come back before this happened. Help, please

    Hello

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
    Mode has no default password (unless someone has changed the password so it should be available).

    Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
    has been known to cause this problem.

    Error message when you log on a Windows Vista-based or Windows 7 using computer a
    Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been connected with a
    temporary profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the Admin account hidden from the prompt by if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
    always leave to an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • I can't read my emails or spam, to try to send it, I get the error message 'Unable to load the rich text editor', enamel works with Google, ok, how can I solve this problem in Firefox?

    Error message for Virgin Gmail

    "Unable to load the rich text editor.

    What is the solution?

    You can see https://support.mozilla.com/questions/896294
    and look at this thread, the only real connection so far is it is very recent and it involves blank e-mail.

    Those who are in this thread say blank incoming emails doesn't work except if they Disable Adblock Plus from the icon of ADP.

    In fact, the rich text editor would be in a separate file, there is most likely a connection to ADP because some of these files may be blocked. I used to have a lot of problem in this forum on the web and the tools were blocked (didn't really need them) just because I block a lot of things here: like animals to fur in nurse uniforms, a trash can (toolkit) and that blue area at the bottom of this page that interferes with scrolling and the use of the key 'end '.

    Something seems to be wrong with your profile, clicking on it does not bring it upwards.

  • Windows cannot load the locally stored profile. Possible causes of this error include insufficient __security rights or a damaged local profile. If the problem persists, contact your network administrator. __

    Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a damaged local profile. If the problem persists, contact your network administrator.
    My documents are 'hidden' also

    xpconfused,
    This article explains how to solve problems with a corrupted profile. Article  After return your results. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • have an error on my computer - Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt... local profile, what should I do please help

    have an error on my computer - Windows cannot load the locally stored profile.  Possible causes of this error include insufficient security rights or a corrupt... local profile, what should I do please help.

    Hi MelbaIsaiah,

    I suggest you to follow the steps in the article and check if it helps.

    Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP

    http://support.Microsoft.com/kb/318011

    I hope this helps.

Maybe you are looking for

  • Satellite L50 - A - 1 5 - question about max LAN speed

    Qualcomm-Atheros AR8171/8175 PCI - E Gigabit Ethernet Controller (NDIS 6.30) In the specifications it is said that this network adapter might work on the speed of the LAN 1 Gbps 1000base-t.But the max speed that is displayed on my system is 10BASE-T/

  • Tecra S1 starts correctly but does not work properly and beeps from the BIOS error

    Toshiba S1 began to regularly plant after a certain period of use. Sometimes: BIOS error beeps: short-short-long.Sometimes: Blue screen of reduced resolution or screen size reduced.Sometimes: Just freezes (frozen) and must be turned off manually. Tos

  • Qosmio F60 - 10 L PQF65E - BlueRay Player do not work.

    Hello everyone, my name is Thomas Dettmann, I have a Qosmio F60 - 10L PQF65E - 009019GR which has a blue ray player and a blue ray player. A few days ago I want to see avatar in blue ray. The player was told he isn't updated to play this video. So I

  • Access denied for 5590C software

    Hello Thank you again for this opportunity. I have error message when trying to install the complete software for 5590 C.  I have Windows 7 ultimate. 32-BIT... I scan 5550C and they tell me the software work with my scan complete. If I get this error

  • communication of 64-bit application with 32-bit application on a PC?

    In a project of image processing, we started using x 64 LabVIEW to meet our need expanded memory. However, in order to communicate with the production plant is integrated in the machine, we wanted to use a Profibus DP - COMSOFT PCI card, which is a n