Error unspecified connecting to wifi

Similar Questions

• EAS does not connect via wifi company post - 1.3.5

  This seems to be a somewhat different issue of EE that some know, so it was recommended that I start a new thread. My question: I can access is no longer to EAS via the wifi of my company. It worked before 1.3.5. If I turn the wifi off, I can then connect EE without problem. I get no error when connected via wifi, rather e-mail and calendar just don't update.

  It turns out that our firewall is configured to disallow connections since our internal wireless to internal resources through external access (that is, accessible through the Internet). This explains why it is not working currently - other devices exhibit the same behavior, including iPhones and laptops.

  The question then becomes: why it worked before? I can check before 1.3.5 I can be connected via wifi to my company and still connect to the Regional service. So the previous version tried to connect via wifi, then when he could not, did he switch to EVDO to connect?

  If this is the case, then it is a very nice feature and it would be great if it was turned off. If it is not the case, then I have no idea why it worked prior to 1.3.5.

• Error - Server cannot be found. Can't connect to WIFI in Windows XP machine.

  Original title: I can't connect to wifi using my laptop. I can log on when perfectly well using the ethernet adapter and my cable modem.

  I can't connect on wifi with my laptop. "Wireless network connection" reads "connected." Power supply: 'excellent '. When I try to connect to internet, I get the message "Cannot find server" as if there is a problem with my IP address. I can connect to the internet perfectly well when you use the with my cable modem ethernet adapter. Any ideas?

  Hi cmptrken,

  You can follow this link and check if the problem persists.

  In the Windows wireless network connection problems

  Hope the helps of information.

  Please post back and we do know.

• Air iPad does not connect to wifi. Network settings reset did not help. Unable to connect to the internet to do the software update.

  I can't connect my wifi iPad air. I tried;

  Reboot & force restart

  Reset network settings

  Connect the iPad to my Mac.

  I can't do a software update to 9.3.2 (without wifi). Seen on another thread to remove this update under settings > storage management. Tried, did not help. When I try to check the updates, I get this message "an error occurred while checking for a software update".

  Something is blocking your access to the update from Apple servers. Update iOS has never worked in this place before? Have you tried to use iTunes to update to iOS?

• My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  Not knowing what the 'followed the steps posted' have been

  The iOS device connects to other networks? If Yes, which tends to indicate a problem with your network.

  The iOS device sees the network?

  Error messages?

  Other devices connect now?

  The iOS device has connected before?

  Try the following to rule out a software problem:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Power off, then back on your router

  . - Reset network settings: settings > general > reset > reset network settings

  - iOS: troubleshooting connections and Wi - Fi networks

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  - iOS: recommended for WiFi routers and access points

  -Restore from backup. See:

  iOS: how to save

  -Restore factory settings/new iOS device.

  If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• MacBook freezes when connected to WiFi

  A MacBook Pro bought at the end of 2013 which, until the beginning of the week, a little while after the upgrade to 10.11.3 (no idea if that is related or not), my laptop has started to stop randomly, or so I thought.  Then the weirdness happened when I went to work to try to get fully backed up with my drive Time Machine here, and it does not crash, all day.  But when I get home?  Crash in a minute or two out of my bag.  Work the next day, once perfect yet.

  I finally sharpened in what the problem has been connected to a wireless network, either at work or at home.  If I am connected via ethernet, there is no problem at all with the thing (as was the case since I have the laptop), but if I connect to WiFi?  Laptop stops, screen off first, apparently very high treatment and then powers down.  If I turn it back on and let the computer laptop, same again.  If I turn on, quickly turn off the WiFi, I can then go about as usual.

  Someone had something similar to happen to them?  Any idea how fix his?

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Laptop does not connect to Wifi

  I have an Inspiron 17r, and I sometimes has incredible problems of Internet connection. Anything else in my house can work very well, but my computer is unable to connect, need help that I have no idea what to do.

  Hello

  What operating system is installed on your computer?

  You receive an error message when you try to connect to Wifi?

  I suggest following the steps mentioned in the link and check:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1

  It will be useful.

• I can´t connect via WIFI.

  I can´t connect via WIFI. My equipment is a Realtek RTL8191SE WLAN 802.11n, is recognized by the computer as work, and the version of the driver is the last update, I found on the web (version 2015.1.427.2010, dated 2010.04.27. What should I do?

  Hi Jeremiah c,.

  ·         What happens when trying to connect via wifi?

  ·         You receive an error message/code?

  ·         Have you made changes on the computer before this problem?

  ·         What version of the operating system is installed on the computer?

  Follow these methods.

  Method 1: Run the network troubleshooter utility.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:  Start the computer in safe mode with network and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 3: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4: Follow the steps in the articles provided.

  In the Windows wireless network connection problems

  Wireless network card: frequently asked questions

  Also update the latest drivers for the network card.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Reference: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows?T1=tab04

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

• Aspire E 15 cannot connect to wifi

  My laptop suddenly cannot connect to WiFi (error "Unable to connect to this network").  I run the Acer care center, and it says that my system is up to date (including drivers).  I used the health check to identify the problem, but "Troubleshooting couldn't identify the problem.

  The wireless network card is Qualcomm Aheros QCA9377. I went to http://www.acer.com/ac/en/US/content/drivers and there are 3 Atheros drivers listed.  I don't know if I should install a new driver and install since there are 3 of your choice.

  Please advice.  Thank you.

  I solved the problem by installing the driver Wireless LAN Driver (NFA435) (ver. 12.0.0.102), available at http://www.acer.com/ac/en/US/content/drivers#_ga=1.265780556.217261961.1453001145.

• Internet does not work, make HTTP: error 12007 connection

  * original title - error 12007 I need help! *

  I have a Windows XP with Service Pack 3 internet does not work. I got tired, he works with this http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/error-12007-the-server-name-or-address-could-not/2cbfb8a8-8970-4aaf-843c-1c781dc8053f post, but when I tried it on my netbook my windows update comes out of @%SystemRoot%\system32\shell32.dll,-22580

  I have an idea I have a missing or corrupted WinSock, but I'm not sure.

  Diagnosis of last run time: 23/01/12-18:52:53

  WinSock diagnostic WinSock status attmpting error information to validate the WinSock providers database: 2 error not all entries could be found in the basic services provider winsock catalog. A reboot is required. user redirection of information in support of the appeal. user redirection of information in support of the appeal. Diagnosis of network adapter

  Network location detection Info Using the Internet connection at home Identification of network adapter Info Network connection: name = Wireless 3 network, device = Broadcom 802. 1 1 b/g WLAN, LAN = Media Type, type SubMedia = wireless Info Network connection: name = connection to the network of Local 2, device = Atheros AR8132 PCI - E Fast Ethernet Controller, Media Type = LAN, type SubMedia LAN = Info Connections Ethernet and wireless available, ask the user for selection action User input required: select network connection Info WiFi selected State of the network adapter Info The network connection status: connected

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection.

  Hello

  You can refer to the suggestion provided by Divya the similar thread with a possible solution:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/error-12007-the-server-name-or-address-could-not/2cbfb8a8-8970-4AAF-843c-1c781dc8053f

• DeskJet 3054 ceased to connect to WiFi

  DeskJet 3054 error 'not connected' comes after selecting the WPS option.  System used to work with WiFi under Maverick, but stopped with two changes: Comcast upgraded the router and update OSX.  HP support says that they do not have driver for OS x - 10.10 Yosemite... So what can I do to connect to the new WiFi network?

  Hey @dndutter,

  Welcome to the Forums of HP Support!

  I would like to help you today with the resolution of the networking problem you are having with your all-in-one printer HP Deskjet 3054. Given that you have received a new Comcast router the wireless should be implemented new on your Deskjet to work with the new router. Because you get the message 'not connected' when you try the WPS option, it would seem that your new router does not support this configuration. After selecting the WPS button on the printer, the printer starts a timer that allows two minutes press the WPS button on your wireless router. If you do not have a WPS button on your router that unfortunately Comcast failed to provide you with a WPS capable router and you will need to connect wirelessly via a USB cable. This can also be problematic on your Mac OS X 10.10 operating system that you don't have the full feature software and drivers. The last Mac OS offered the full feature software and drivers for your product was Mac OS X 10.8.  Therefore, you will use the generic Apple update driver.

  If you have a Windows PC or a Mac running 10.8 and underneath, you can run the Installation to feature full on this computer in order to put the printer in wireless via the USB connection. Once the printer is set up for wireless that simply add it to your operating system from Mac OS X 10.10 and you should have all the features. It should not be an option that you will need to do a wireless Ad-Hoc configuration.

  How to install correctly on Mac OS X 10.10:

  Note: Will need you a USB cable temporarily for this configuration.

  Step 1: Uninstall the drivers:

  Just open printing & scanning under system preferences and make sure that your Deskjet does not appear in the print & Scan window. If this is the case, select the printer and (-) less out to remove it.

  Step 2: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select Repair disk permissions

  Step 3: Check the Apple updates:

  Plug your USB cable from your Deskjet to your Mac.

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click Update now
  5. Install your available updates
  6. Restart your computer

  Step 4: Add the printer:

  1. Go to the Apple
  2. Select System Preferences
  3. Select Print & Scan - if your USB printer is not displayed as added in already click on the (+) plus sign to add the correct in driver.
  4. Now that the correct driver is added into your printer, you can connect wireless.

  Unplug your USB cable again please

  How Set up Ad Hoc Wireless:

  1. Select the button on the front panel of your printer wireless

  2. under the wireless menu, select settings

  3. under settings, select Enable Wireless

  4. once the wireless is enabled on your printer should be flashing the blue light

  5. Once your Mac choose your wireless icon. Under the list of available networks, you should see one similar to the one like the HP Photosmart which is circled in the image below. However, instead of Photosmart it will say HP Deskjet 3054.
  

  6. connect to the network that appears with your HP Deskjet 3054 inside.

  7. on your printer wireless light should go solid after a few minutes. At this point, you want to print a new Network Configuration report.
  

  1. On the control panel of the HP product, press the wireless button (). Wireless menu.

• In Vista, doing the system restore, get error "unspecified error occurred when using System Restore.

  My system restore keeps coming back with the error, unspecified error occurred when using System Restore. Cannot change files. Also, after that I am unable to use my avast antivirus. All the sheilds on my Avast are lost. I; m not computer saavy so please help me

  Hello

  You can be infected with the Malware

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If not, try Safe Mode do a system restore

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• BBM error with connection: no connection found!

  Hi gurus,

  I just installed BBM app on my Samsung Galaxy S3 device, with a service of data, network of the UNITED Arab Emirates. I am facing a problem with the connection; the app said "Cannot finish installation" with error "No Connection Found. It is said ' your connection to the wireless network is turned off. Restore your connection and try again. "Agree that wifi is turned off, but then I have a 3g connection provided by the netwrok of the United Arab Emirates. Why isn't the app recognize this connection?

  BTW, is that this average BBM for Android app is not yet available for the UNITED Arab Emirates?

  Pleas help.

  Rgds,

  AFA

  I also got the same error. But this could be due to high traffic. Ignore simply leave it for awhile to settle

• Smartphones blackBerry 8320 cannot connect to wifi at home

  I recently got a BB8320. All right, I get emails and can send in public hotspots that I am able to connect to Wifi, download EDGE or sometimes UMA. But with my home network wireless, I have a connection problem. Searching for networks brings my router. I select Connect and enter the WPA key but I get an "impossible to associate with the network" error message. This could be to do with my ISP? (Tiscali, in the United Kingdom). Mobile operator is Orange. Any ideas, anyone?

  Got home last night, looked at the phone and guess what? Display of SSID wireless and also UMA! Phone has been turned off at night, so I guess I should have restarted after notice of the folling baseball. Thanks for this and hope it helps others :-)

• LAPTOP UNABLE TO CONNECT TO WIFI ALL OF A SUDDEN!

  My laptop was connected to wifi for over a year.
  A few days ago, he was unable to do so. It identifies the wifi connection and the signal strength is called 'excellent '.
  Other devices at home can connect WiFi as usual.
  So the problem some puts in my laptop. I tried troubleshooting. Nothing works.
  Some registry setting would cause?

  Some help would be really appreciated.

  arcprasad.

  Hi arcprasad,

  Thanks for posting your query in Microsoft Communities. The problem description, I understand that you are not able to connect to the WiFi network. Provide the following information for the better understanding of the issue:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You use a third-party security software?

  ·         Have what troubleshooting measures you tried?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  How can I troubleshoot network card?

  For reference:

  How to reset the Protocol Internet (TCP/IP)

  Let us know if you need more assistance.

  Thank you.