Error video driver on Satellite Pro A60

Similar Questions

• ATI error and no windows - Satellite Pro A60

  Hello

  When I start my computer, I get a blue error screen c0000415
  A quick google reveals that this is one of these: http://support.microsoft.com/kb/832324

  "So what are you bothering? I hear you cry - the problem I have is, in getting this error of the other (also the ATI card based) I stuck my red disc in and erased everything - including the windows... and CFLA error occurs before windows installs and SafeMode (-that worked perfectly before) does not work because windows is not installed!

  Oh the fun.

  "I think it's a hardware error" - Yes so don't I... However, before the reinstall and get it back, I could work to the computer in safe mode and videos played very well with the resolution and full color. Am I missing the point if I think a video work is an indicator of a working video card?

  I admit that I'm perplexed indeed. I'll try to dig up an old Windows 98 drive, but I don't know how much this will help, because the only copy of XP I have is on the recovery disk... [Return to step 1]

  Any suggestions much appreciated - thanks in advance...

  [it's a satellite pro A60 w / 256 +?] RAM, processor celeron 2.8 Ghz, ATI Mobility Radeon 7000 etc...]

  Hello

  As suggested in document of Microsoft this problem can occur if an ATI Radeon 7200 graphics card has been installed on your computer and the driver that is supplied with this adapter may not work correctly with Windows XP.
  The installation of SP2 should help.

  This statement of Ms. says it all! It of not a hardware problem but it is a compatibility issue with Windows XP (without SP2) and the driver radeon ATI 7200.

  You should try to get an original CD of Windows XP with or without SP2.
  The software callednLiteallows you to create a Windows clean boot CD and add the patches MS and service packs for this CD.

  Then, you can try to boot this CD and after installing the OS, you need to update or change the graphics driver!

• Satellite Pro A60: error code 11030 - invalid destination drive

  I have a satellite pro a60 and it won't let me do anything I have an error message 11030, - drive destination not valid. can someone please help me solve this! regards Jean

  Hello

  I read that this error can appear after using the Symantec ghost.
  Have you used this program?

  Try using the chkdsk command or try to run the error checking that you can find in the properties of the HARD drive.

• Satellite Pro A60: Blue screen - ATI2DVAG display driver. DLL in endless loop

  Hello
  Laptop is a Toshiba Satellite Pro A60 with ATI Mobility Radeon 7000 IGP video card, running Windows XP Professional and SP 2.
  During the start in most cases systems hang up with blue screen.

  I installed the latest drivers from http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK (Version dated 6.14.10.6430 Date 09/03/2004) but the problem continues. After second - last third - it reboot now works.
  The blue screen says (translated from German):
  "Component that probably caused the problem: ati2dvag.dll; the device driver is in an infinite loop; Subsequently the unit does not work, or the device driver is not program the equipment in the right way. STOP 0X000000EA. A dump was created.

  Please HELP - THANKS in advance!
  Best regards
  Frank

  Hello

  I studied a bit on the Toshiba site and found this interesting paper Toshiba on the error message Satellite A60 and blue screen on startup.
  http://support.toshiba-tro.de/KB0/TSB5300X7000MR01.htm

  This document describes how to upgrade the BIOS. The update of the BIOS should help solve this problem. Take a peek inside.
  Please post if you have solved the problem

• Satellite Pro A60: Windows XP cannot start isapnp.sys driver missing or corrupt

  I had a Satellite Pro A60 for about 3 years without problems.

  Last week Toshiba touchscreen developed vertical lines of the bleeding and I got error message "Windows XP cannot start because of the missing or damaged driver isapnp.sys. I tried using the recovery disk, but it loads OK, but it fails to make a difference. Hard drive seems to work OK as slave to another computer.

  No matter what wil suggestions appreciated!

  Thank you

  Found this Microsoft Knowledge base article:
  You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup

  http://support.Microsoft.com/kb/315311/en-us/

  Can it help

• Satellite Pro A60: Blue error screen

  I got my satellite pro A60 laptop for about 6 months and, recently, a blue screen started flashing up to white writing scrolling down really fast and then the laptop restarts. I don't have the time to read what says the writing of this article. Can someone give me advice on what this could be and how to solve the problem?

  Thanks in advance.

  Hello

  Well, the simple is to reinstall the operating system. But if you wish, you can disable the function of Windows Xp to automatically read this massage of error on reboot.
  Go to system in Control Panel. Then the Advanced tab. In the announcement of the Startup Recovery section press set button. You need to disable the option automatically reboot.
  But it of very difficult to understand the error blue screen for ordinary users.

  Good bye

• Need latest driver for ATI Radeon 7000 igp - Satellite Pro A60 mobility

  Please let me know which ati driver to d/l for my laptop satellite pro a60 en please.

  How can I find out what bios version I have installed and which is the latest relevant version for me and windows xp.

  Many thanks steve

  Hi Steven,

  You can access the last display on the web site of Toshiba driver. Just click on the tab Support & downloads (Download Files) and then enter the details of your laptop. You can select all drivers or just the display drivers.

  You can find out what version of BIOS you have by entering the BIOS during the initial power on the process. Just press the ESC key when the TOSHIBA logo appears, and then press F2 to enter the BIOS configuration panels. Make sure you do not make changes to the BIOS settings unless you really want to. :-) As with the details of the driver, you can access the latest version of the BIOS for notebook on the Web from Toshiba-> Support site @ downloads-> update your BIOS, then just enter the details of your laptop.

  Kind regards

• Satellite Pro A60: How to replace the drive?

  Satellite Pro A60 replace DVD player - need repair
  Or does anyone know how to remove the drive of this laptop Bay

  Post edited by: chrielli

  Hello

  I think the disk replacement procedure is very similar to replacements on other laptops.
  To remove the STRANGE bay module follow these steps:

  1. turn the computer.
  2. remove the black binding screws.
  3 turn the computer over and open the display.
  4. push the module bay ODD.

  All that s. It s not achieved with a screw.

• Need XP for Satellite Pro A60 display driver

  My PC in safe mode when on game sites is now and I'm having truble locate the driver.
  I need help laocating and installation which I new complettely instead.

  Hello

  Visit the page of the European driver Toshiba:
  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  Here, you have to choose:
  Archive-> Satellite Pro-> A-> Satellite Pro A60 Satellite Pro

  Then you could find the display driver and can download and reinstall.

  Good bye

• Satellite Pro A60 do not read CD

  Satellite Pro A60 - EN, reader of CD/DVD-RW reading high. Up til now read audio CDs, DVD video & MP3. Now stopped reading CD - R that were created elsewhere, two photo/word files and now MP3 does not read. Once stopped play CD audio Middle ripping today. Restarts the computer after the error report microsoft and fact then automatically have stopped ripping today.

  Laser seems clean, car not clear, no virus.

  Natrually outdated... warranty...

  Welcome pointers

  Hello

  Have you tried to remove the drive from Device Manager?
  Try this procedure. After restarting the OS should recognize the drive again.
  Maybe this will solve the problem.

  Good bye

• Satellite Pro A60: On startup graphics card problem

  Just got a Satellite Pro A60.
  Whenever it starts it stops and then restarts. It then works perfectly OK, even if restart you. But then if you start it once it is shut down for a few hours it crashes at startup upward again?
  Windows error report accusing the graphics driver ATI Radeon 7000 (see report below), but I've updated the graphics driver and still get the same problem.
  CAN ANYONE HELP?

  This is the error report:
  Error caused by ATI Graphics Driver: no specific solution found
  Description of the problem
  An unknown error has occurred in ATI Graphics Driver, created by ATI® Technologies, Inc.
  Resolution of problems
  ATI® Technologies, Inc. is currently not aware of a specific solution for the problem you reported. Here is a list of recommendations to take that may help prevent the problem does not happen.
  Download and install an ATI Graphics Driver Update from one of the following locations:
  o Windows Update
  o ATI® Technologies, Inc..
  If an updated driver is not available, check with your computer manufacturer.
  If you are running the latest version of the ATI graphic driver, please contact ATI Technologies, Inc.® for your support options.

  More information
  If this problem persists with the latest updates to ATI Graphics Driver, we strongly recommend that you obtain assistance and troubleshooting directly from ATI® Technologies, Inc. information.
  If you are not familiar with ATI Graphics Driver and you are questioning how the program was installed on your computer, it is possible that the program was installed with another program. If you don't know why ATI Graphics Driver is running, many programs configure themselves automatically starts whenever you turn on your computer.

  Hi Barry,.

  I'd be inclined to return your laptop to an authorized Service Agent Toshiba. The OEM software should not require all the updated drivers at this early stage of his life, and the unit will be well within its warranty period.

  The closer your repairman details can be found on the Toshiba site.

  HTH

• Cannot start WXP installed on my Satellite Pro A60

  Hello

  I just got a Satellite Pro A60 of second hand. He had installed xp pro, but I did have no password. , so I formatted the drive and made two partitions. There are 30 GB and the other approximately 7 GB.

  I tried to install a WXP Pro copy that has worked for me before, but he would not complete the installation. Now, I have a Toshiba Recovery disk. When I use the recovery CD, the installation goes fine, but when its full and restarts, the laptop does not start in Windows.

  He comes to Toshiba screen twice then WXP logo appears for a moment about 10 seconds or more, then go back to the f8 screen. Last time, he said it could be due to a hardware change with these lists of 'safe mode' options, safe mode with command prompt mode implementation network, security, last known good configuration. I tried all the but still cannot boot into windows.

  The hard drive has the files I used l-soft active@killdisk unerasor tools, change password and partition Viewer, I could see the file system of windows etc. Laptop has 512 MB RAM, 40 GB drive HARD, Celeron.

  I just updated the bios to V1.90 by CD-ROM. Please can someone help me?
  Thank you

  Post edited by: selftought

  Post edited by: selftought

  Hello

  You have installed the operating system from the recovery CD Toshiba but have you used the original Toshiba comes with this laptop recovery CD?

  The BSOD appears mainly due to hardware failure or the software flaw serious
  The Toshiba Recovery CD contains all the drivers needed and tools, but if you use a recovery CD badly the pre-installed drivers can cause the error and BSOD could appears.

  However if some hardware like the memory module or the graphics card is damaged the BSOD are included also.

• Satellite Pro A60: NTLDR is missing

  Satellite Pro A60 tells me when I turn on that I have a ntldr is missing, press ctrl + alt + delete to restart.
  So I tried reinstalling and it will not let says me I file setupdd.sys could not be loaded error code is 4 Setup cannot continue to press a key to exit.

  Hello

  If it of not possible to restore the operating system of the Toshiba CD recovery if the HARD drive or only the partition is damaged or corrupted.
  According to Microsoft description message Setupdd.sys could not be loaded. 4 error code may occur if your computer contains a material that is damaged or is not compatible with Windows XP.
  http://support.Microsoft.com/kb/330181

  "Well, I also found Microsoft troubleshooting document on the NTLDR is missing ' error message.
  http://support.Microsoft.com/kb/318728

  I think you should follow the guidelines. If it doesn t help trying to format the whole HARD drive, delete all partitions and launch the installation from the original Windows XP boot CD

• During BIOS update by Satellite Pro A60 went down and did not start

  Hi all

  I have a Satellite Pro A60 and I've updated the bios. To halfway the update, my laptop came down and started Hasna´t since. It only give a couple of beeps (trying to tell me the bios is damaged, I guess) and turns off again.

  Tried to start with (~) key pressed (a tip I received from a friend), but without success.

  I live in a country where there is no available Toshiba dealer and I rather not ship the laptop for repair.

  Does anyone know how to fix this? Any help would be greatly appreciated.

  Thank you

  This doesn't sound good.
  If during the POST, the BIOS detects a problem, it will normally display an error message visual on the monitor explaining what the problem is. However, if a problem is detected before it initializes BIOS video card or a video card is not present or not detected then BIOS will play through the Speaker beeps to let you know there is a problem.
  Depending on the type of BIOS you have the BIOS can play beeps in a specific pattern to indicate what the problem is, or emits the signal even a few times indicating the problem.

  In your case, it is possible to s you used a bad BIOS or bad BIOS procedure. Both can damage the motherboard.
  To avoid such damage and mistakes, Toshiba published FAQ document.
  How to upgrade the BIOS on most of the units!

  That you should read before making updates to the BIOS!
  Unfortunately, I n t think that you can fix yourself. I think you should ask to help ASP.

• Satellite Pro A60 - CD/DVD works intermittently

  Hello

  I have a Satellite Pro A60, which is two years old. Recently, for some reason, the CD/DVD drive now only plays discs intermittently. I have to insert it several times before it will play. Some play at all.

  I used a disc cleaner lens several times, but it seems that to help on the occasion of the strange - that is to say, a drive can be started immediately after I used the lens cleaner, but this could just be a coincidence.

  I wonder if I need to replace the drive and, if so, how much that would be easy. The computer is out of warranty.

  Thanks a lot for all the helpful tips.

  Ron

  Hey Buddy

  It really looks like a hardware malfunction. Probably the lens of the drive can not calibrate correctly due to mechanical stress for a long time.
  Unfortunately, this anomaly cannot be repaired. The only solution seems to be a replacement of equipment (by car).

  Disc replacement is a little tricky. You know. Not all readers are compatible because of the different master\slave\c-salt settings. With the help of the player is not compatible, you will get #1 error IDE.

  That's why I really recommend contacting ASP in your country and ask the compatible CD/DVD players for your laptop.

  Bye and good luck