Error when changing the name of the folders-"file or folder does not exist.

Original title: I can't rename my files
I can't rename my folder in windows vista. "It gives me this error" the file or folder does not exist "and I can't cut/past this files.

I do not use any unillgel characters such as. and / and...

Hello

Run the diagnostic tool for the article mentioned below to resolve this issue:

"The file or folder does not exist" error in Windows Vista:
http://support.Microsoft.com/kb/949109

Kind regards
Afzal Taher - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • "Cannot run the script at line 1. File or folder does not exist. »

    Whenever I have start AfterEffects, I get an error as he is looking to find my recent projects.  The error is as follows: "unable to run the script at line 1. File or folder does not exist. "I haven't changed the location in one of my project files.  It's the same external drives that I use for months.  When I click on OK the same window opens several times and then finally the historic window opens completely blank and empty.  I am able to reopen projects however since the RECENT PROJECTS drop in the top bar.  It is a very strange and disturbing behavior.  In addition, I always use 13.7.2 because when I go to update it is impossible to connect and gives me this error.  I sat with Adobe support for an hour today, and we couldn't understand.  As I am in the middle of major projects, I decided to not update, but this error at startup is very worrying.  Someone has an idea of what could go wrong or how I can fix this?

    Thank you very much for your time.

    -Fredo

    Screen Shot 2016-07-06 at 7.21.26 PM.pngScreen Shot 2016-07-06 at 7.21.11 PM.png

    Ok!  Just got a response and an Adobe technical support solution.  The problem is that there is a problem with these versions of sequels (and I found the same problem in first to my horror this morning as well!) and the last couple Mac OSs.  The solution is to close the window "library".  It is then normally.  Apparently they fixed in the last update, but I found the same problem on my second computer, which has been updated.  Anyway, if anyone has this problem, close your cc library window.  Voila.

  • Whenever I run Firefox, it appears an error message indicating "Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist." Contact the author to this problem. »

    Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist. Contact the author to this problem.

    The above statement is in the box pop up error every time, when I run Firefox. If I click on ok in the box of Firefox opens. How can I solve this problem of initialization/launch?

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

    See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

    If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.

    You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.

    You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  • There was an error importing the widget: [3003] file or directory does not exist.

    Hi allllllllllllllllllllll I want to help please?

    I have a lot of questions?

    1:widget.jpg

    There was an error importing the widget:

    [3003] file or directory does not exist.

    sound appear when aim import widget?

    import.jpg

    2:

    Impossible to load the WSDL. If there are currently online, please verify the format of the WSDL and URI file (http://www.adobe.com/cfusion/exchange/exchangedwwidgetsfacade.cfc?wsdl)

    sound appear when aim box in!

    sign in.jpg

    3:

    Could not feed widget. Make sure that you are connected to the internet.

    Unknown error.

    Could not feed widget. Charging | View more information!

    Sorry to say, but the browser Widget support has been removed from Dreamweaver CC

  • ExtendScript: Could not perform the Action, because the destination folder does not exist

    "Adobe Photoshop (CS 6 on mac): use Extendscript (below) to convert in a .png .psd file size.

    "Save for web error: could not perform the Action, because the destination folder does not exist. Can anyone help?

    I am trying to convert the image size of a record of entry into an output folder:

    #target 'photoshop '.

    var outputWidth = 1024;

    var inputFolder = Folder.selectDialog ("input file");

    var outputFolder = Folder.selectDialog ("output folder");

    If (inputFolder! = null & & outputFolder! = null) {}

    var file = inputFolder.getFiles ("*.psd");

    for (var i = 0; i < files.length; i ++) {}

    var file = files [i];

    var doc = app.open (leader);

    If (doc.width > outputWidth) {}

    var height = (doc.height / doc.width) * outputWidth;

    doc.resizeImage (outputWidth + "px", size + "px");

    }

    var options = new ExportOptionsSaveForWeb();

    options.format = SaveDocumentType.PNG;

    Options. PNG8 = false;

    doc.exportDocument (outputFolder, ExportType.SAVEFORWEB, options);

    doc. Close (SaveOptions.DONOTSAVECHANGES);

    $.writeln('File ' + (i + 1) + "" + files.length + "transformed");

    }

    }

    I added a few comments, I hope this helps...

    #target "photoshop"
    var outputWidth = 1024;
    var inputFolder = Folder.selectDialog("Input folder");
    var outputFolder = Folder.selectDialog("Output folder");
    var startRulerUnits = preferences.rulerUnits;
    //make sure you are working with pixels
    preferences.rulerUnits = Units.PIXELS;
    if (inputFolder != null && outputFolder != null) {
        var files = inputFolder.getFiles("*.psd");
        for (var i = 0; i < files.length; i++) {
            var file = files[i];
            var doc = app.open(file);
            if (doc.width > outputWidth) {
                var height = (doc.height / doc.width) * outputWidth;
               /*  doc.resizeImage(outputWidth + "px", height + "px"); */
               //only one value is required
                doc.resizeImage(outputWidth, undefined, undefined, ResampleMethod.BICUBICSHARPER);
            }
            var options = new ExportOptionsSaveForWeb();
            options.format = SaveDocumentType.PNG;
            options.PNG8 = false;
            //get the filename without the extension
            var Name = app.activeDocument.name.replace(/\.[^\.]+$/, '');
            //build up the output file name and path
            var saveFile = File(outputFolder + "/" + Name + ".png");
            //you need to have a full filepath not a folder
            doc.exportDocument(/*outputFolder */saveFile, ExportType.SAVEFORWEB, options);
        doc.close(SaveOptions.DONOTSAVECHANGES);
            $.writeln('File ' + (i + 1) + ' of ' + files.length + ' processed');
        }
    //restore ruler units
    app.preferences.rulerUnits = startRulerUnits;
    }
    
  • Component af:inputfile, create the file if it does not exist

    Hello

    I have a requirement in my project where I need to export the data to display in the xml file. To do this, I use af:inputfile component so that the user can select the file where the data should be exported. My requirement is that if the file name that the user entered in file dialog box does not exist, I need to create a file with this name, and select the same. I get no clues how to achieve this. Currently, if I type name that does not exist I get error on the component af:inputfile "file not found. Please check the gave the correct file name.

    Is there a way I can solve this problem.

    Kind regards
    Alya

    application/xml

  • Apex 5.0.2 error when changing the table name in the treatment of automatic line of process (process row)

    Hello

    I need a little help...

    For some reason, I have to change the underlying table for a treatment of automatic process (process Row) line (form).

    Although such a change is possible in the designer of the page (under "settings") Apex does not recognize the new name of the table, but seem to rather use the name of the original table "old."

    Pretty strange (new/modified) (the new table columns) are (correctly) error message.

    For example, the 'old' is: TABLE_1 and TABLE_2 new.

    TABLE_2 has a new COLUMN_NEW column (and corresponding P1234_COLUMN_NEW page element exists)

    Then the error message says something like: not found COLUMN_NEW column in TABLE_1. Althougt I changed the table to be TABLE_2.

    Maybe it's a bug or I do something wrong about this?

    Thank you in advance!

    André

    OK, just to get some - you changed the name of the table twice:

    -Rendering of section--> Page1234: Pagename--> pre-rendering--> after the header--> process of--> line from TABLE_2

    -Treatment article--> treatment--> process--> process of line from TABLE_2

    I thought, that always seek you the line of TABLE_1

    Christian

  • In the edition browser says site does not exist or is offline

    My client tried to connect to in the edition of browser for a few days and she stops if an error saying that his site does not exist or is offline, are neither the case.  IBE has changed?

    Probably something to do with this discussion:

    in the browser, error mounting

  • FDPSTP failed due to the ORA-02149: specified partition does not exist

    EBS R12.1.3
    Database 11.2.0.2
    Error message
    **Starts**23-JUL-2012 16:49:21
    ORACLE error 2149 in FDPSTP
    
    Cause: FDPSTP failed due to ORA-02149: Specified partition does not exist
    ORA-06512: at "SYSTEM.AD_DDL", line 165
    ORA-06512: at "APPS.MSC_MANAGE_PLAN_PARTITIONS", line 371
    ORA-14074: partition bound must collate higher than th
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    j := 1
    table := MSC_ATP_SUMMARY_SO
    partition_name : ATP_SUMMARY_SO__1
    l_count := 1
    Partition for instance 1 already exists
    table := MSC_ATP_SUMMARY_SD
    partition_name : ATP_SUMMARY_SD__1
    l_count := 1
    Partition for instance 1 already exists
    l_share_partition := N
    plan count := 0
    After Create Partitions
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+

    901629 wrote:
    EBS R12.1.3
    Database 11.2.0.2
    Error message

    **Starts**23-JUL-2012 16:49:21
    ORACLE error 2149 in FDPSTP
    
    Cause: FDPSTP failed due to ORA-02149: Specified partition does not exist
    ORA-06512: at "SYSTEM.AD_DDL", line 165
    ORA-06512: at "APPS.MSC_MANAGE_PLAN_PARTITIONS", line 371
    ORA-14074: partition bound must collate higher than th
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    j := 1
    table := MSC_ATP_SUMMARY_SO
    partition_name : ATP_SUMMARY_SO__1
    l_count := 1
    Partition for instance 1 already exists
    table := MSC_ATP_SUMMARY_SD
    partition_name : ATP_SUMMARY_SD__1
    l_count := 1
    Partition for instance 1 already exists
    l_share_partition := N
    plan count := 0
    After Create Partitions
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    

    How do you get this error?

    Please see (INSTALLER ALERT - setting the APS scores upward and Instance of Collections of data in R12 [552415.1 ID]).

    Thank you
    Hussein

  • Air iPad with iOS 9.2.1 in 'Settings' under the Safari icon HomeKit icon does not exist (and is not possible to configure HomeKit)

    Hello:

    I have iOS 3 devices: iPhone 6, iPhone 5, iPad Air all with the latest iOS 9.2.1.

    I bought a Netatmo Thermostat, with the HomeKit technology.

    In the iPhone 6 there in 'Settings' under the Safari icon HomeKit (configure) icon.  BUT in the iPhone 5 and iPad Air does not exist the HomeKit icon (and it is impossible to configure HomeKit and link the Thermostat).

    Tank you for help me!

    In the article below, it seems confugure Homekit first by downloading the app from the manufacturer.

    Use the HomeKit accessories compatible with your iPhone, iPad and iPod touch - Apple Support

  • Error when changing the settings of the particular virtual machine to a virtual machine?

    When attempting to change the setting of the virtual machine to a virtual computer on a stand-alone ESXi 4.1 host (this is also the only VM on that), we get the error message next to the VI Client.

    Call 'EnvironmentBrowser.QueryConfigTarget' to object 'envbrowser-114 "on vCenter Server 'vCenter Server Name' failed.

    However, if we connect to the ESXi host through the client, we are able to change the settings of the virtual machine.

    Is there any Member have such experience?

    Thank you

    Hello

    You went through following KB article?

    http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2006615

    Hope it helps

  • Error when changing the language of the front panel in Japanese

    Hello world...

    I'm changing the front panel of the English language to Japanese. To do this, first I exported the strings through the Tools->Advanced-> export channels.  After that I changed one of the label in Japanese and saved with Unicode encoding (as with normal ASCII coding Japanese texts will not be read). I imported the same file I recorded in a Unicode encoding format. But it shows that the error given below

    "Error analysis during the import of channels
    to test Main.vi
    of D:\Riyas\Work\X 520\28-11-15\X520 RT-Host 20151127\Strings\Test Main_Import 1. txt
    "Saturday, November 28, 2015 11:09:14.

    (See the attached screenshot of error)

    So I tried to import the same file ASCII coding mmee, then it is successful. But the problem is that the modified label is not in Japanese that it shows a few points mark. I'm able to import the channel file saved in ASCII format code but the channel with coding ASCII file will not read Japanese texts. So please help me to solve this problem.

    I need to import a channel file saved with a Unicode encoding or in any case format to enable Japanese texts as ASCII coded format.

    I modified the configuration settings to activate the Unicode format as follows "UseUnicode = TRUE'." I'm using Labview 2014.

    Thank you...

    racahmd wrote:

    My requirement is to change the language of the labels on the front. Is it possible to export the settings of the legend and label parameters separately? Currently, I am only able to export the two together. Also when I import the unicode file that does not contain unicode characters, it shows the same error.

    Perhaps the requirement is statesd as such because the people who wrote the requirement had no idea, you can keep the labels even but change the subtitles only.  Changing labels is a massive effort that could have profound ramifications to the code itself.  Not the same with a legend.

  • 500 unexpected substitute error when changing the id of the application in - app. XML

    Hi, I'm debugging my app on the real PlayBook,

    I decided to change the application in the - app.xml id, since then, I get an error "500 unexpected substitute" when you try to run the FB4.5 application.

    This threa500 unexpected substitute at the launch of app browsing I understood the problem came from the ID of the application being changed, but not the inner packaging ID used to reference the app in the PlayBook.

    This is verified by looking inside the bar file for application id generated old and new application id, package id remains unchanged. (I think it's actually a bug in the SDK, I'd love to have confirmation of this from someone competent)

    so I thought OK, I'll just delete the app from the PlayBook to clear the former association IDPack applicationid and reinstall...

    but still no hope.

    Here is a detailed description

    old id of the application has been myOldAppID

    new application id is myNewAppID

    generated from the package id: myPackID (even for the two application ID)

    It seems that the PlayBook maintains a list of applications that have already been installed on it: I tried to delete the application from the command line using blackberry - deploy and the package id (obtained from the .bar):

    blackberry-deploy -uninstallApp -device 169.254.0.1 -password *** -package-id myPackID
    

    The app is removed as planned, it is deleted from the PlayBook, the command displays the result menu

    Info: Sending request: Uninstall
    Info: Action: Uninstall
    Info: Uninstalling myPackID...
    Info: Processing 0 bytes
    actual_dname::myOldAppID.debug.myPackID
    actual_id::myPackID
    actual_version::
    result::success
    

    The result, we see that the PlayBook concludes the old reference to my application and displays the ID of the application on line actual_dname

    now, if I run the same command, but with an obviously wrong package ID:

    blackberry-deploy -uninstallApp -device 169.254.0.1 -password *** -package-id someWrongID
    

    I get the result

    Info: Sending request: Uninstall
    Info: Action: Uninstall
    Info: Uninstalling someWrongID...
    Info: Processing 0 bytes
    actual_dname::
    actual_id::someWrongID
    actual_version::
    result::success
    

    Note the line actual_dname is empty, there is no reference for the application with package ID someWrongID

    Here, I'd rather see an output like "application not found for package id someWrongID" but anyway...

    So if I run the same command again, with my application package ID, I expect the line actual_dname will be empty, because the application has already been deleted, but the result is always:

    Info: Sending request: Uninstall
    Info: Action: Uninstall
    Info: Uninstalling myPackID...
    Info: Processing 0 bytes
    actual_dname::myOldAppID.debug.myPackID
    actual_id::myPackID
    actual_version::
    result::success
    

    Here, I see that the PlayBook still holds the former association of myOldAppID with myPackID, even if the application has been removed...

    I tried to restart the PlayBook, cleaning and reconstruction project, all without result... the reference remains in the PlayBook, and myPackID remains unchanged.

    NoI am blocked, if I want my app to debug, it seems that I must leave application ID with the old value...

    I would like to know, is it possible to remove completely an application and all of its references, of the PlayBook?

    And there at - there someone who can explain how the Package Id is generated, and if it's a bug or a feature?

    Thank you!

    Hi Julien,

    This problem is supposed to be fixed on the latest SDK version: 1.1.1. Could you please confirm what command line tools do you use?

    blackberry-airpackager -version
    

    will show you its own version.

    See you soon!

  • in the face of an error when changing the sysadmin password

    Hi expert,

    When I change the sysadmin password I m facing the error under linux in production below. I do not understand why this error occurred. I have change the password of sysadmin many times but never any error. How to change the password of sysadmin the production instance is open.

    [applprod@oracleerp ~] $ FNDCPASS apps/apps 0 System/Manager USER SYSADMIN sys@adm!n

    -bash:! n: event not found

    Please suggest how can I solve the error above.

    Thanks and greetings

    pritesh Rodriguez

    Hi Ranjan Pritesh,

    Please do something like this and see if it helps you:

    FNDCPASS apps/apps 0 System/Manager USER SYSADMIN "sys@adm!n."

    Thank you &

    Best regards

  • HP Photosmart 7260, Windows 7 64-bit, error when changing the size of paper in printing preferences

    Driver HP Photosmart 7200 Series installed (61.53.25.9) for printer HP Photosmart 7260 on HP ProBook 4270 s running the Windows 7 64-bit operating system. I have a few packs of paper HP Everyday glossy 4 x 6 (without tab) to print photos. When you attempt to change the format of 'Photo 4 x 6' paper on the printing preferences > tab paper quality, Windows Explorer crashes. Please help me solve this problem. Thank you.

    Indeed, I can reproduce the exact behavior even with Windows 7 64 bit.

    Add another driver that should solve problem withut wasting any use of the feature:

    Click on add printer and select the USB port.

    While the list of printers, click Windows Update and leave a few minutes up to that list once again displayed.

    Under HP, select HP Deskjet 6980 and cmplete configuration.

    Now try printing using the driver 6980.

    Please let me know of any changes,

    Shlomi

Maybe you are looking for

  • Red screen

    I dropped my iPad 2. It is out of warranty. When I tried to turn it on it started with a red screen with a battery symbol. After a few seconds, he would cycle to a gray, then black screen, then repeat the loop. It would not keep pressed power button

  • IPhone 5 s tasks randomly

    Dears; I use an IPhone 5s that I've recently upgraded to the latest version of iOS (9.3.2), my problem is that the phone starts the opportunity to perform tasks at random without my inetrvention (navigation contact, do a search, typing random charact

  • After the closure by Satellite L750D cannot get back in victory when opening again

    Hello I have this weird problem when I close my laptop L750D that I can't get back into windows after opening it again. The first seconds after the opening of the laptop, the screen is black but then suddenly shows the login for a short-lived seconds

  • Satellite A500-1GL - service Intel RST does not

    Hi all Looks like I'll have a series of problems. I just noticed this message on my Satellite A500-1GL and I was wondering what this means and how do I solve it? When I clicked it, I got a pop up saying that he was trying to connect to the service, b

  • Need a copy of FreeCell

    Anyone know where I can find a copy of the FreeCell game/program that came with Windows?  I use Vista and can not upgrade to Windows 7.