Error when trying to access the microsoft update web site

I am using windows XP Pro. SP3 32-bit (build 2600.xpsp_sp3_gdr.100216 - 1514)

I have IE v8.0.6001.18702

When I access the microsoft update web site, I get a message saying that I need to update windows update and I want that allows. No matter what I said or after 30 seconds have elapsed if I do nohting I get the message:

  • The instruction at "0 x 08100068" referenced memoery to '0 x 08100068', the memoery could not be "written".

The address is different from one attempt to another, but both are still the same as eachother.

When I close this tab IE grave message box down and I get the message 'recovered tab' normal.

Can I search / install updates using vbscript widely available, or automatic update installation of windows. The problem only occurs when you try to access the web site itself.

I tried to download and install the latest windows update manually, but this does not solve the problem.

I am unaware of the date of the last update because I'm unable to access the update log.

I use a current version of McAfee Anti-virus.

I think my windows is a clean install, but I didn't do it, so I can't be 100% certain.

Jacob

I uninstalled ie8 and found ie7 under him.

I am able to access the site WindowsUpdate using ie7.

Jacob

Tags: Windows

Similar Questions

  • Error code: 0xC800042D while trying to access the Windows Update Web site

    Original title: Windows Update error Access

    When you try to access the Windows update site to see what optional updates are available I got OxC800042D error message and can not access the site. Please tell us how to get around this problem. Thank you

    Hi AlanHy,
     
    These errors can occur caused by one of the following problems:
    • Applications or processes that interfere with Internet communications
    • Problems on your computer
    • Strong Internet activity
    • Recoverable database errors

    Follow the steps listed in this article to resolve the problem:

    You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  • 0x8DDD0002 error code; I'm not logged as an administrator while trying to access the windows update Web site

    Real title: 0x8DDD0002 error Code

    Cannot access the update site.  Said that I am not logged as an administrator even if I am put as one on the log settings.  I know that my updates are not up-to-date and automatic updates is enabled.  How to solve this problem?

    Thank you

    Hello

    I suggest you to follow the steps from the link and check if it helps.
     
    Resolution: error number: 0x8DDD0002
     
    In addition, check out the link and check if it help.
     
    Hope this information helps.
  • 0x800A0046 error when you go to the Microsoft Update site.

    Original title : How can I correct the ox800A0046 error

    When I arrived at the Microsoft Update web site it gives me Ox800A0046 error code when I try to follow the instructions, it does not.

    Hello

    I suggest you try the steps from the link below and check if it helps.

     Error message when you visit the Windows Update Web site or the Microsoft Update Web site: "0x800A0046": http://support.microsoft.com/kb/910338

    Hope this information is useful.

  • 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD site Web Microsoft Windows Update or connect to the Microsoft Update Web site

    • 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD? Regds, 'a journey of a thousand miles begins with a first step."

    Resolution for the error Code:

    0 x 80248011, 0x80072EE7, 0x8024402C, 0x8024502D, 0x800A0046, 0x800A01AD

     

    When you try to connect to the Microsoft website Windows Update or connect to the Microsoft Update Web site, you may receive one of the following error codes:

    • 0x800A0046
    • 0 x 80248011
    • 0x80072EE7
    • 0x8024402C
    • 0x8024502d
    • 0x800A01AD

    CAUSE The 0x800A0046 error code may occur if one of the following conditions is true:...

    • The 0x800A0046 error code may occur if one of the following conditions is true:

      • The logon user account belongs to the guests or limited account groups.
      • The security descriptor does not have authenticated users run Windows Update or Microsoft Update.
      • The impersonate a client after authentication policy is missing the account administrator and Service in the list of users and groups.
    • Error code 0 x 80248011 may occur when there is a problem with the database that stores Windows Update or Microsoft Update information on your computer.
    • The 0x80072EE7 error code may occur if the client computer cannot find the correct IP address when it tries to resolve a URL for the Windows Update Web site or the Microsoft Update Web site. This error can occur if the Hosts file contains a static IP address.
    • The 0x8024402C or 0x8024502D error codes typically occur because there is an incorrect character in substitution of proxy settings.
    • The 0x800A01AD error code may occur if the c:\windows\system32\wuaueng.dll file is missing or is not registered correctly.
     

    RESOLUTION

    0x800A0046 error code to resolve this error, use one of the following methods: me...

    0x800A0046 error code

    To resolve this error, use one of the following methods:

    Method 1: Remove the user account that is experiencing difficulties for customers or account groups

    1. Click Start and run, type control admintools, and then click OK.
    2. Click on computer management.
    3. Expand local users and groups.
    4. Select users.
    5. Open the account used to access Windows Update or Microsoft Update.
    6. Click on the Member tab of.
    7. Select the user account you want to remove, and then click on remove.

    Method 2: Set the security descriptor

    1. Click Start, run, type cmd, and then click OK.
    2. Type sc tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL unit), and then press ENTER.

      You will receive a message of 'Success'

      Note the Sc.exe tool is not available in a default Windows 2000 installation. The Sc.exe tool is from the Microsoft Windows 2000 Server Resource Kit.

    3. Type Exit to close the command prompt.
    4. Try Windows Update or Microsoft Update again.

    Method 3: Add the Local Administrator and accounts Service him impersonate a client after authentication

    1. Click Start, click Run, type secpol.msc and press ENTER.
    2. Expand local policies.
    3. Click user rights assignment.
    4. Double-click to open the impersonate a client after authentication
    5. On the local security settings tab, click on add a user or group, and then add the administrator and the Service to the list of users and groups.
    6. Click OK and restart the computer.

    Method 4: Configure the remote procedure call (RPC) service to log on under a Local System account

    1. Click Start and run, type services.msc, and then click OK.
    2. Find and right-click the remote procedure call (RPC) service and then click Properties.
    3. On the connection tab, click Local System account, click on apply and then click OK.
     

    error code 0 x 80248011 before solve you this problem, clear the Microsoft Internet Explorer cache. To do this, follow these steps:

    1. In the Internet Explorer Tools menu, click Internet Options.
    2. On the general tab, click on delete files in the temporary Internet files section.
    3. Click OK, and then click OK again.

    To resolve this error, recreate the database that stores Windows Update or Microsoft Update information on your computer. To do this, follow these steps:

    1. Click Start, click Run type cmd in the Open box, and then click OK.
    2. At the command prompt, type the following command and press ENTER: net stop wuauserv
    3. At the command prompt, type the following command and press ENTER: cd /d c:\Windows\SoftwareDistribution

      Where c:\Windows is the folder where Windows is installed.

    4. At the command prompt, type the following command with the quotation marks and press ENTER: rd /S /Q DataStore
    5. At the command prompt, type the following command and press ENTER: net start wuauserv.
    6. Close the command prompt window.
     

    0x80072EE7 error code to resolve this error, examine the Hosts file. (This file can also be hosts. Sam.) Make sure that the file lists all the entries IP static for the Windows Update Web site or the Microsoft Update Web site.

    The Hosts file is located in the C:\Windows\system32\drivers\etc folder. To view the Hosts file, you may need to associate the file with Notepad. To do this, follow these steps:

    1. Right-click the Hosts file.
    2. Click Open with, and then select Notepad from the list of programs.

    If the Hosts file contains a static IP address that is associated with Windows Update or Microsoft Update, comment the entry by adding the sign # at the beginning of the entry. You can also delete the whole line and save the changes to the Hosts file.

    Note programs, such as Web accelerators, accelerators DNS, utilities of caching DNS and Spyblockers, can add static IP entries for the Windows Update Web site or the Microsoft Update Web site to your Hosts file. This scenario can cause Windows Update or Microsoft Update to fail.

     

    error codes 0x8024402C or 0x8024502d to resolve these errors, remove the characters from the list of exceptions to the proxy, and then clear the proxy cache. To do this, follow these steps:

    1. Open Internet Explorer.
    2. On the Tools menu, click Internet Options.
    3. Click the Connections tab, click LAN settings, and then advance.
    4. Delete any entry in the Exceptions section.
    5. Exit Internet Explorer.
    6. Click Start, run, type cmd, and then click OK.
    7. Type the following commands. Press ENTER after each command.
      • proxycfg d
      • net stop wuauserv
      • net start wuauserv

    0x800A01AD error code to resolve this error, use one of the following methods. Method 1: Register the MSXML program files to register the MSXML files, follow these steps.

    Note You may not have installed the files listed in steps 3 and 5 on your computer. If you don't have one of these files, when you try to save the file, you will receive an error message similar to the following error message:

    LoadLibrary (".dll") has failed - the specified file name could not be found.

    You can ignore this error message and continue to the next step.

    1. Click Start, click Run, type regsvr32 Msxml.dll in the Open box, and then click OK.
    2. When you receive the following message appears, click OK:
      DllRegisterServer in Msxml.dll successful.
    3. Click Start, click Run, type regsvr32 Msxml2.dll in the Open box, and then click OK.
    4. When you receive the following message appears, click OK:
      DllRegisterServer in Msxml2.dll successful.
    5. Click Start, click Run, type regsvr32 Msxml3.dll in the Open box, and then click OK.
    6. When you receive the following message appears, click OK:
      DllRegisterServer in Msxml3.dll successful.

    Method 2: Save the file c:\windows\system32\wuaueng.dll to save the c:\windows\system32\wuaueng.dll file, follow these steps:

    1. Click Start, click Run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.
    2. When you receive the following message appears, click OK:
      DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

    Kind regards
    Sohail Patel

    Regds, 'a journey of a thousand miles begins with a first step."

  • Access to the Microsoft Update Web site [error number: 0x8024400A]

    When I try to update by using the Update Web site I get the message [error number: 0x8024400A].  I need to upgrade to SP3, but I can't access the Web site to do this.  Any help would be appreciated.

    Try to download the SP directly from here.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

    I hope this helps.

  • Unable to access the Windows Update Web site.

    When you try to access the Microsoft Windows Update site, the following occurs. the Web page that says "checking to see if you have the latest version of..." "is displayed briefly. It is immediately replaced by a page of information. This has "[error number: 0x800A0005] the website has encountered a problem and cannot display the page you are trying to display." The options provided below may help you solve the problem,"with the other possibilities in clickable (I went through them but nothing helped...

    I tried Microsoft FixIt Center, but all she could do is to tell me that "necessary attachment components" but not which.

    I also tried to reset Windows Update components according to the instructions on "http://support.microsoft.com/kb/971058".. .no luck.

    I am running XPPro SP3 IE8.

    Symantec Endpoint Protection version 11.0.7101.1056.

    Any help much appreciated.

    Hello

    Perform the steps mentioned below and check if that helps:

    Method 1

    Check if the Windows Update Service is selected as a starting point.

    To do this, follow these steps:

    1. on Start, run and type services.msc in the Open box, and then click OK.

    In services.msc find the automatic updates service and double-click it.

    1. click on the tab log and ensure that the "Local System account" is selected for the account logon and the box "Allow service to interact with desktop" is DISABLED.
    2. in the hardware profile sectionin the log tab, check that the service is activated.
    3. on the general tab, the Startup Type should be Automatic, otherwise, the drop-down list box and select automatic.
    4. under "Status of Service" under the general tab, the service must be started, click the Start button enable.

    Repeat the above steps for the service "BITS Background Intelligent Transfer Service ()".

    Method 2:

    You can also re - register dll in Windows Update.

    To do this, follow these steps:

    1. Start, run, type CMD and click ok
    2. in the black command window, type the following command and press enter

    REGSVR32 WUAPI. DLL

    Wait until you receive the "DllRegisterServer in WUAPI. DLL succeeded"message and click OK."

    * Repeat the same step for each of the following commands:

    REGSVR32 WUAUENG. DLL
    REGSVR32 WUAUENG1. DLL
    REGSVR32 ATL. DLL
    REGSVR32 WUCLTUI. DLL
    REGSVR32 STINKS. DLL
    REGSVR32 WUPS2. DLL
    REGSVR32 WUWEB. DLL

    Method 3:

    Delete the corrupted Windows Update files. To do this, follow these steps:

    a. at the command prompt, type the following command and press enter

    net stop WuAuServ

    b. at the command prompt,

    type cd %windir% , and then press enter

    c. in the opened folder, type the following command and press ENTER to rename the Software Distribution folder

    Ren C:\Windows\SoftwareDistribution SD_OLD

    d. restart the Windows Update Service by typing the following at the command prompt

    net start WuAuServ

    Type Exit and press ENTER to close the command prompt.

    e. restart the computer and check if you have a similar question.


    For reference:

    You can access the event viewer on your computer and check the newspaper of windows for messages/error codes important related to the question and after return from errors in the event viewer.

    See the link below for more details:

    What are the information contained in the logs of the event (Event Viewer)?

    http://support.Microsoft.com/kb/308427

    Let us know if it helps.

  • Repeatedly, getting errors when trying to install the windows updates... tried all Microsoft fixed, no results, error 80070643 and 8024AFFF

    Installation and update of Windows Vista are no longer works... I tried all Microsoft fixed... nothing helps... continue to get errors and no installation, please help...

    Thank you

    Hello

    Do the following and check:

    Step 1:

    Try to do a Scan of the SFC (System File Checker). The scan will look bad system files and will attempt to fix them, if possible.

    (a) click the Start button.
    (b) type: cmd.exe in the search results.
    (c) right click the cmd.exe file and select 'run as administrator '.
    (d) in the CMD window, type: sfc/scannow and press the Enter key.
    (e) restart and see if that solves the problem.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Step 2:

    If the problem persists, you can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Let us know if it helps.

  • Code 8007065E error when trying to install the KB2633171 update

    Original title: 8007065E error Code

    Hello

    I'm trying to download the updates and the following error.

    Details of update for Windows 7 (KB2633171) error message security failure: Code 8007065E

    I also tried to download other software and it fails. Can someone help me out here?

    Amanda

    Hello Deepak

    It was most helpful, thank you very much!

    I actually made a mistake last night, I got sucked in by scammers of Microsoft and let them stupidly on my computer. They knew so much on my computer that I thought them!

    When he asked me for money, realization hit me and I ended the session. I then restored the computer about a month ago. I don't know if it has stopped them hack into my computer or not, but the updates for my antivirus etc. are working.

    Do you know if there is anything else I should do here?

    I really appreciate that you take the time to help.

  • FIXED ~ can't access the windows update Web site ~ FIXED

    I'm editing my question details & scored the title to indicate that the problem has been corrected.

    I am sharing my 'dose' for these sho could also have a similar problem with Windows Update.  I do not have a Browser Helper Object enabled, which was to be enabled - "MUWebControlClass".  Of course that was axtivex needed control.  Windows Update now performs normally for me & I was able to successfully download & install my updates - yay!

    My original message follows the stars below...

    ***********

    ... the desktop running windows xp pro sp3 & IE8

    For what it's worth, I go to the Microsoft site & downloaded IE 8 & installed, as my first troubleshooting, before you come on this forum.  Theoretically, I should be as up-to-date as I can be with XP Pro SP3 & IE8, but I wanted to see that everything had been downloaded.  Well, I can't this info now.

    I wanted to see which updates had been installed & when I clicked on the link for Windows Update, said the "Welcome to microsoft update" page, below the message to install the activex control required to view the Web site... fthere is no popup message any that I can right click on to install an activex control.

    I googled similar questions on this forum & tried a similar question MrFixIt & who has not resolved the problem I encounter.

    IE8 is NOT my default browser, or generally leave automatic updates 'ON' unless I'm updating.

    I try to keep my current computer with the Windows updates on a monthly basis, I have to use IE8 for a couple of Web sites.  My current default browser is Dragon of Comodo.

    Your input & feedback & suggestions are appreciated!  Thank you all in advance.

    «Click Start ---> 'run'---> and in the dialog box, type "inetcpl.cpl" without the quotes and click on ' OK'.» Click on the "Security tab"--"custom level button" and scroll down to the box "Download signed activex controls" and select ""prompt(recommended"). Click ok and exit. This should activate the InfoBar at the top of the screen, when you visit windows update to download the activex.

    Good luck.

  • When attempting to access the Macy's Web site, be redirected to the "local shop" site

    From recently when I try to access the site Web of Macy, I am sent to a site 'shop local' showing that the circulars of Macy.  How can I stop this?

    * original title - site has been hacked *.

    Macy must have caught the malicious code and got rid of him. It's a good idea to serve you cookies and browser history, once a month, help things move faster then on the web.

    I'm glad it's working for you now.

    Jim

  • Cannot access the Microsoft Updates Web pages

    using XP Home Edition on a laptop. Victim of a crisis (virus/trojan/worm - don't know what) in the new year, she launched the system restore and all of the restored data.  Downloaded AVG to analyse the system, checked MS Security Center and I saw it worked not - says, he had been arrested.  Much research for corrections, tried several of them, including uninstall AVG and other scanners, antivirus, installation SP 3 and MS Security Essentials and all other MS security downloads I could find.  Still no access pages of MS update, always "THIS webpage IS NOT AVAILABLE".  Also downloaded mpam - fe.exe and MPAs - fe.exe but does not - get access denied when select current to run user.  How can I get updates MS if I can't access Web pages?  I don't know what updates I've missed.

    Mosty likely, the computer can be infected by ROOTKITS.

    Try TDSSKILLER to find rootkits.

    Download and run from here

    http://support.Kaspersky.com/downloads/utils/TDSSKiller.exe>

  • Try to use the Windows Update Web site

    I try to use the microsoft update Web site.  Whenever I try to start the update process I get a message asking me to please change your Internet Explorer security settings / persistence under Userdata, select Enable.

    When I check, the option is already set that way.  I am running Windows XP.  Can someone help me get the Microsoft update Web site to check that the setting is correct?

    http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=3&ln=en&IsMu=false

    Description of the problem

    This error appears when you attempt to save advanced settings on the site to update with Internet Explorer Userdata persistence disabled.

    Applicable operating systems
    • Windows 2000
    • Windows XP
    • Windows Server 2003
    Resolutions
    1. make sure that the Local Administrator account and the Service are added to the security policy 'impersonate a client after authentication ".

    1. Click Start.
    2. Point to programs.
    3. Point to Administrative Tools.
    4. Choose local security policy.
    5. Expand local policies.
    6. Select the user rights assignment.
    7. Double-click to open the impersonate a client after authentication.
    8. On the local security setting tab, add the Service and the administrator of the list of users and groups.
    9. Click OK.
    10. Restart the system.

    2. enable the Userdata persistence in Internet Explorer

    1. Start Internet Explorer.
    2. On the Tools menu, click Internet Options.
    3. Select the Security tab.
    4. Select the Internet Web zone icon.
    5. To adjust the security level, click custom level.
    6. Under Miscellaneous enable the Userdata persistence.
    7. Opens the dialog box are you sure you want to change the security settings for this zone .
    8. Click Yes.
    9. Click OK.
    10. Try Windows Update again.
  • We get an error "D: / is not accessible." a device i/o error"when trying to access hard drive

    * Original title: e/s problem

    I am not able to access my hard disk.windows that says: -.

    "D: / is not accessible." an i/o device error. "

    I also tried chkdsk but it says that it is not directly operatable.

    Hi Rishanpc,

    Thanks for the post. I am sorry to hear that you found a mistake "D: / is not accessible." a device i/o error"when trying to access hard drive.

    I imagine the inconvenience that you are experiencing. I will definitely help you with this.

     

     

    To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

    1. have you checked if the cables are connected properly?

    2 what is an internal hard drive or external?

    3 have there been recent changes made on the computer before the show?

     

    The most common cause of a non-accessible i/o error is a disconnected cable. When the computer tries to access a device, and it's no response after several tests, it will generate this error. Another common cause is when a program tries to access a file that has been removed or eliminated.

     

    Disconnected Hard Drive/cable misconfiguration

     

    Internal hard drives require a specific set up. IDE hard disks can have only one master. If another hard drive has its defining together correctly pin code, a user is perhaps not able to access the data, and he will receive a message that the drive are not available. Cables come off inside the case of the computer also cause a not accessible i/o error. The user can correct this problem by opening the case and attach the data cables for each drive safely at the back of each drive and the motherboard.

     

    You can follow the steps below and check if it helps.

     

     

     

    a. go to "Control Panel" in the start menu and choose 'performance and Maintenance '.

    b. click on 'System' then go to the Hardware tab and click on "Device Manager."

    c. find the device that records an error by developing the appropriate category nodes. If the device has a red "X" on the icon beside its description, the hardware is disabled; Go to step d to activate it. Otherwise, go to step e.

    d. go to the general tab and click on "Activate the device" found in the device status section. then press 'OK '. (Note: you may need to follow the guests, as indicated via an assistant of favorable device.) If you do, continue to click "Next" and follow the instructions until the process is complete.) Test the equipment. If an error is displayed, go to step e.

    e. click the general tab and click "Troubleshooting" found in the device status section and then press 'OK '. Follow the prompts to fix the problem. If an error is still displayed, go to step f.

    f. click the driver tab and click on 'Update driver'. Follow the instructions until the process is complete and then to test the equipment.

     

     

     

    Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

  • an error occurred trying to access the service

    I wonder why I bought a year subscription to Adobe Reader to convert PDF files to Doc files, when it WORKS and no one seems to be able to help me! I'm on a Mac Book Pro with Yosemite (do not upgrade it slows down your Mac evil) and whenever I try to convert a pdf file to a doc I get "an error has occurred while trying to access the service", can someone help me please?

    Hi Cedric,

    The customer service number is 800833687

    Is the direct link to chat: http://adobe.ly/19llvMN

    You must click on 'Still need help' to start the chat session.

    You get this error: "year error occurred trying to access the service", all trying to access the service by the reader.

    Try to use the link: https://cloud.acrobat.com/exportpdf log in with your Adobe ID and try to convert a pdf file to doc and check if it works for you.

    Agress,

    Rave

Maybe you are looking for