Error when you try to move the cloudvolumes folder in a different data store

OK, so I'm moving my App volume 2.10 cloudvolumes folder of datastoreA on vcenterA on datastoreB on vcenterB, because we want to separate us from our VDI of our basic infrastructure.

We are able to access the two vcenters on the web client.

I tried to just copy the folder datastoreA to datastoreB cloudvolumes and received the following error.

Copy of the file object has already been deleted or has not been entirely created


I've seen this error in Veeam before when moving virtual machines from a data store. The solution is to remove and readd the virtual machine in the inventory.


Everyone tried to move the cloudvolumes folder?


Any help would be appreciated.


Thank you



I would never move the folder because there are files that will always be accessible or are not in read/write mode.

I suggest you copy the files from the 1 folder to another, or maybe add an additional data store to the manager Appvolumes and let the files (appstacks at least) copy automatically.

Tags: VMware

Similar Questions

  • "error code 43' when you try to move the iphoto folder.

    Hello

    When you try to transfer my photos on external hard drive folder, I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) ".  I'm following the instructions from apple by drag-and - drop the file.

    have you rebooted and started the copy without opening any applications?

    How the drive is formatted?

    (select the drive, click CMD + i)

    you copy several files at once, or a large group of files or a file large?

  • Error when you try to move the SSM to IPS 6.1

    I am running 4,0000 E1 and when I try to upgrade, it says "can't upgrade the software on the sensor. This package cannot be installed on the platform of the SSM-IPS10. »

    I tried upgrading via IDM, FTP, SCP, and I get the same error.

    I'm trying to upgrade using the package IPS-AIM-K9-6.1-1-E1.

    Simple problem to use the file of E1 6.1 (1) bad.

    The IPS-AIM-K9-6.1-1-E1.pkg file is specific to the AIM - IPS module for ISR routers.

    AIM - IPS module for ISR routers must not to be confused with the ASA-AIP-SSM modules for devices of the SAA.

    All other platforms (including the SSMs) should use the standard 6.1 (1) E1 file upgrade:

    IPS - K9 - 6.1 - 1 - E1.pkg

  • get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

    get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

    This forum is for Microsoft Security Essentials.

    You question is with Oracle Java.

    It is recommended to go to www.oracle.com to get help.

  • Windows XP SP3: Access denied error when you try to change the beginning upward in MS CONFIG. Director of applications but I am the administrator.

    original title: access denied errors when you try to change the beginning upward in xp sr CIP 3 msconfig. I am the administrator, please the administrator

    I am a user with privileges under windows xp pro service PAC 3. I recently received an access denied error message acusing me of not being the administrator when I tried to limit the start up programs in msconfig. What should I do these changes in safe mode?

    You have scanned your system for malware? It seems its infected with something. Download ccleaner install / run. Then go to tools / startup. Delete the entries that you want here

  • Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems) in Vista

    Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems). It keeps failing even though I followed the steps all the recommended (in aid) and installed some other stuff.  Tried several times but nothing helped.  I saw a recommendation to install a Wups2.dll file but do not know if I should do it because the recommendation is for Windows XP and I have Vista Home.

    Hello

    I suggest check the link below and try do a SFC (System File Checker) scan and check if it helps.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    I would also say that you reset Windows update components and check if this may help.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

  • Error when you try to play the game: memory access violation

    memory access violation

    I have redownloaded a game that has been previously loaded on my computer, now I get this error when you try to play the game "Memory Access Violation".

    Your sound card that is more than adequate.
    If the game was previously installed and worked fine then maybe it is not been completely uninstalled.
    I suggest you uninstall the game, look in the registry for any left over entries that can refer to the game.

    Then restart and reinstall the game.

    Alternatively, you can try to install in compatibility mode. If the program is not compatible, then you try to install and run the program in compatibility mode.
    Use the following steps:
    (1) right click on the program
    2) click Properties
    3) click on the Compatibility tab
    (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

    Check out the link here: make sure to run older programs in this version of Windows
    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    Let us know if that helps.

    Marilyn

  • Error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

    I am trying to set up Parental controls for the user account of my son and I get the following error: error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

    I tried to use the administrator account.

    When I ran the System File Check sfc/scannow

    TI completed indicating certain files may be damaged and cannot be repaired and check the convertible bonds. LOG file.

    How can I know which files are corrupted.

    Any other Suggestions on how to fix this user profile?  Do I have a profile that I don't know?

    Hi wimuggss,
     
    Step 1: Disable UAC (User Account Control) and check the result
    See How can I change the behavior of user account control by using the cursor?
    Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.
     
    Important: Enable UAC after you complete the steps.
     
    Step 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
    See Start your computer in safe mode
    Kind regards
    Syed - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.
  • When you try to move the curson using the button on the screen pass in zoom mode

    using a Hp pavillion computer g6 newly purchased with Windows 8.  Find that on occasion the cursor sticks or when you try to move the cursor on the button the screen goes in zoom mode.  left click stopped occasionally.  Makes it impossible to play games where he need to left click and hold and use the keyboard to move the cursor, as can find the computer will do a zoom or vice versa in a way that seems random.

    Hi William,.

    I suggest you to update the touchpad drivers by visiting the manufacturer's Web site and check if that helps.

    Most computer manufacturers install a custom utility Touchpad. Instructions for use the touchpad may vary according to the model of the computer.

    See the documentation provided with your computer or contact the computer manufacturer to obtain the information and verify that the settings are correct.

    You can see the steps of troubleshooting provided by HP

    You can also view these steps:

    a. press the Windows key + R

    b. type devmgmt.msc , then press enter.
    c. click on the arrow next to the mouse and other pointing devices and Double click on touch pad and click on "update software".

    Please post with the State of the question.

  • Disabled-Adobe Acrobat 9 Pro on old PC. Implementation error when you try to install the new PC. "Invalid serial number."

    Disabled-Adobe Acrobat 9 Pro on old PC. Implementation error when you try to install the new PC. "Invalid serial number."

    Please see the following documents.

    1. Error "invalid serial number". Acrobat 9 | CS4
    2. Invalid serial number error

    Let us know if that helps.

  • Error when you try to view the application latencies

    I'm not able to get see Planner to latencies report application series of tests with multiple virtual machines in them. If I run a test that has 3-2 VMs in it while I'm able to view the results of the trial very well, however when I try to run tests with more of that I get errors when I try to view the results. When I try to load the web page results to see Planner, nothing happens, and I get the following error in viewplanner.log:

    2012-10-24 20:16:13, 025 INFO {}
    Unhandled error
    Traceback (most recent call changed):
    File "/ usr/lib/python2.6/site-packages/twisted/web/http.py", line 773, requestReceived
    Self.Process)
    File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 127, process
    Self.Render (resrc)
    File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 147, in rendering
    body = resrc.render (self)
    File "/ usr/lib/python2.6/site-packages/txjsonrpc/web/jsonrpc.py", line 112, rendering
    () defer.maybeDeferred(function,_*args).addErrback
    -< exception that is caught here >-
    File "/ usr/lib/python2.6/site-packages/twisted/internet/defer.py", line 133, in maybeDeferred
    result = f (* args, * kw)
    File "/ tmp/ViewPlanner/web_interface.py", line 527, jsonrpc_getResultsMap
    File "/ tmp/ViewPlanner/mysql_interface.py", line 571, in getTestAverages
    exceptions. KeyError: 0

    When I try to manually execute the python script statement, it tells me that there is no result for the test.

    I just ran a test locally with 276 VMs, according to viewplanner.log, all 276 VMs transferred their results to the device. Yet I still get this error when you try to view the results.

    I tried to create new images GoldenDesktop and GoldenClient, as well as deployed a new device see Planner and reinstalled all of its agent programs, nothing helps. Anyone know what could be the cause?

    We have seen this issue for large series and I attach a patch file that you can overwrite the/root/ViewPlanner harness directory and then restart the vdiappd service, and then you can give it a try.

    For manual results extratcion by using the report.pyc script, you must use '-j' I ' and '-j' operations if you ran just 1 iteration of the workload.

  • Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to assist with co

    Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure.  I tried to convert the document integer and same result.  Specifically, I bought the feature export to Word.  Please help.  I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.

    Hi sdr2014,

    I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.

    So, let's try this:

    If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.

    Please let us know how it goes.

    Best,

    Sara

  • Error when you try to install the browser first elements 10 Inspiration

    On the Adobe Premiere elements 10 welcome screen, I get an error when you try to install the browser of Inspiration (IB).

    Sorry, an error occurred.
    This application cannot be installed because this installer has been misconfigured. Please contact the

    author of the support application.

    I have uninstalled/reinstalled the latest Adobe Air. I have connected to photoshop.com while trying to install IB as well.

    OS = Windows 7 64 bit

    Adobe products installed

    Photshop CS5

    Lightroom 3.5

    Thank you

    The team and I worked to create this document on the issue. Can you try the solutions listed and see if it solves the problem?

    Can not launch/install Inspiration browser from the home screen. First 10 items | Win 64 bit

    http://kb2.Adobe.com/CPS/926/cpsid_92680.html

    -Dave

  • When you try to open the Junk folder in Mail on my PC it will not load.

    Original title: Mail in Windows 8

    When you try to open the Junk folder in Mail on my PC it does not, the rest of the files are fine. I access distance without and questions

    Can someone help / advise

    Thank you very much

    Hello

    Thanks for the reply and we update on the State of the question.

    It seems to be a problem with the Mail application in this case. I would ask that you run the troubleshooter App and also follow the troubleshooting provided in the link below steps to solve the problem with applications in Windows 8.

    Solve problems with a soft

    Do not respond to the State of the question, so that we can help you further.

  • "Impossible to copy the requested resource is already in use" error message when you try to move the file to the thumb drive.

    I'm going to try really hard to do this makes sense, but I don't know much about computers.  Bear with me.

    Brother gave me a computer.  A graphics Nvidia GeForce 9800 inside.  Because it restored the system settings, the drivers are missing.  Can not connect this computer to the internet.

    So, I went to the nvidia site and downloaded the necessary drivers on my OTHER computer, which is what I'm now on the right.  The download ends, and when I try to move the (drivers) file in the USB, I get this delicious "cannot copy xxxx that the requested resource is already in use".  It is not in use.  I can't even use it on this computer as its pilots for a graphics card that is not yet part of this computer.

    What should I do to make sure I put the file with the drivers on a USB key, on the port to the other computer.

    (by the way, this also occurs with a few random mp3s of the mine.  10 of the 12 tracks on a CD, for example, does copy on the USB no problem, but then two of them to come up with the error message, for no apparent reason.  Don't know if it's relevant)

    Try another USB key. That one is may be damaged or failing. In the meantime, to burn the drivers on a CD - R disc (not CD - RW) to take the target machine. MS - MVP - Elephant Boy computers - don't panic!

Maybe you are looking for