Error when you try to play a DVD: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

Similar Questions

• Windows media player-Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings.

  I bougth Windows 7 starter, after the installation, I am unable to read the CD/DVD with media player. These messages continue to flow whenever I have CD/DVD slot...

  "Windows Media Player cannot play DVD video. You may need to adjust your Windows display settings. Open display in Control Panel settings, then trylower your screen resolution and color quality settings"I've adjusted manually, no solution, I had use microsolt auto FIX no way." Please help.

  Windows 7 Starter Edition or Basic... does not include a DVD decoder.

  As you can see in the following article... MS recommends
  upgrade to Windows 7 Home Premium, Ultimate or business.
  More features for you... more money for them...

  Info about DVD decoders: Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  It is possible that one of the following freeware
  media players would play your DVD:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  GOM Media Player
  http://download.CNET.com/GOM-media-player/3000-13632_4-10551786.HTML?tag=mncol;2

  Good luck...

• Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  I got some video footage of various camcorders dating back to 1989 converted to DVD so I could create a newsletter. I couldn't have windows media player to run. Any help out there?

  I got some video footage of various camcorders dating back to 1989 converted to DVD so I could create a newsletter. I couldn't have windows media player to run. Any help out there?

  =================================
  Have you had success playing other video DVDs?

  Maybe you need a DVD decoder?

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates)

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  Also, you could try the free VLC Media Player:

  VLC Media Player
  http://www.videolan.org/

  And it may be interesting to try to download and install
  one of the following codec packs:

  * Proceed at your own risk *.

  Info about CCCP
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/

  Good luck...
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Media Player cannot play back the video DVD.

  Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Original title: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  I was troubleshooting video playback issues throughout the morning after the reconstruction of a machine with a fresh install of W7 Ultimate, shot a few questions there.

  The first and foremost reason I couldn't play THE VIDEOS was due to the ATI Rage video card that was in the machine, proved that this card was not compatible for playback of DVD video on W7.  No problem with the system of video files (.avi, .mpg, .mp4, etc.), only reading DVD.  Disabling this card and media player running with a standard VGA device allowed me to play regular DVD movies very well.

  Another question, I stumbled on was with burned copies of the DVD, it turned out that my system DVD players, (2, one is a HP630E and the other is a typical ATAPI DVD DD internal 8 x 16), have a problem with playing movies engraved on DVD - RW discs.  Playing discs DVD-R worked well on this system.

  So in your case I try to disable the video device and let the system first use a VGA Standard, if your video plays well then check with the making of video for a updated driver device, saying "you have made any changes" does not mean that the system did not have a bad patch somewhere...

• Media Player all of a sudden will not play the dvd. Error message: Windows Media Player cannot connect to the server

  Original title: Media Player all of a sudden will not play the dvd.

  Suddenly, I can't play DVDs on my laptop. The error message is: Windows Media Player cannot connect to the server. The name of the server are may not be not correct, ther server name maybe isn't available, or your proxy settings are may not be not correct. Any suggestions on troubleshooting of Microsofts page appear to be relevant.

  Hi mcraigQY

   

  1. when exactly you get the error message?

  2. you try to listen to music from any remote location or try to play a DVD?

  3 have you tried to play a different CD or DVD?
  4. what happens when you play the same DVD on another computer?

  5. for how long have you been faced with this problem?

  6. the DVD folder that you are trying to play supported by the windows media player is it?
  7. What is the type of DVD that you try to play?

  Let us know the answers to help you best.

• Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  I am currently using windows 32 bit vist

  I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!

  Suggestions?

  Hello

  1. have you made changes on the computer before this problem?

  2. which antivirus app do you use?

  I suggest you try these methods and check.

  Method 1:

  Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
  Where 'C' is the drive of operating system
  c. delete the log file, and then restart the computer and check the issue.

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• Can't get updates for Windows, "Windows Update cannot currently check for updates, because the service is not running." You may need. "" Restart your computer.

  When I try to install the updates I receive the message "Windows Update cannot currently check for updates, because the service is not running."  You may need. "" Restart your computer,   It does not also. check me the update history

  Hello

  1. you made any hardware or software changes the computer recently?

  2. What is the number of update?

  3. do you get this message for all the updates?

  Follow these methods and check if that helps:

  Method 1:

  Step 1.

  Unplug all external devices, restart the computer, and then try to install updates.

  Step 2:

  I suggest that you follow the steps mentioned and try to start the Windows update service.

  Check if the following services are running.

  (a) Background Intelligent Transfer Service

  (b) cryptographic Service

  (c) Windows Update

  (d) Windows Installer

  a. Click Start, type "services.msc" (without the quotes) and press ENTER.

  b. double-click the service name in the Services list.

  c. under the general tab, next to startup type, make sure that automatic is selected.

  d. If the service is not already running, under Service status, click Start and then click OK.

  e. once the services are started and defined as running, try to install the updates and check.

  Method 2.

  You can follow the steps in this article: http://support.microsoft.com/kb/2509997

  Warning check disk.

  Important: All by performing the check disk on the hard drive if bad sectors are found then check disk try to repair this area, all available data on this sector can be lost.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  See also: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.

• Media Player cannot connect to the server - Original COOD2EE7 error code

  Tried media player - tools - options-network. Cannot configure the Protocol / the proxy settings. Streaming proxy settings area is empty.

  Hello Adelek,

  Thank you for posting.  It seems that you may have a firewall problem.  I that you would suggest to check your firewall settings to see if it's to allow access of media player.  I've also included some basic information about this error.

  Please let me know if this helps you.

  You got the C00D1198 error message when you use Windows Media Player. The following information can help you resolve the problem.

  Unable to connect to the server

  Windows Media Player cannot connect to the server that hosts the content you want to listen to. You may encounter this error message for the following reasons:

  • The name of the server that hosts the content is not valid. If you typed an address Uniform Resource Locator (URL) in the open URL dialog box, verify that the file name is spelled correctly and that the path to the file is correct, and then try again. If you clicked a link on a Web page, the link isn't valid.

  • The server is not available (for example, the server is busy or not online). Try again later.

  • For Windows Media Player proxy server settings are not configured correctly. Verify that your proxy server settings are correct.

    To check your proxy server settings

    1. Click the arrow below the now playing tab, and then click More Options.

    2. Click the network tab.

    3. Check your settings in the Streaming proxy settings area.

       Note

       • If you don't know what your proxy server settings should be, on the network tab, select a Protocol, click on configure, then select Autodetect proxy settings or use the the proxy settings of the browser (available for HTTP protocol only).

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Installed the demo of FIFA 15 and I get this error when I click on play or the game settings

  unhandled exception has occurred in your application, if you click on continue the application will ignore this error and attempt to continue.  If you click on exit, the application closes immediately.

  object reference is not set to an instance of an object.

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.NullReferenceException: Object Reference not set to an instance of an object.
  at DXHelper.DisplayInfo.InitDisplayModeList)
  to DXHelper.DisplayInfo... ctor()
  to fifasetup_csharp. Settings.CreateSettingsForAdapter)
  to fifasetup_csharp. StartingForm.PlayButton_Click (Object sender, EventArgs e)
  at System.Windows.Forms.Button.OnMouseUp (MouseEventArgs mevent)
  at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.ButtonBase.WndProc (Message & m)
  at System.Windows.Forms.Button.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
  Code: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
  ----------------------------------------
  fifaconfig
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  CodeBase: file:///D:/Program%20Files%20(x86) /FIFA%2015%20DEMO/fifasetup/fifaconfig.exe
  ----------------------------------------
  System
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  DXHelper
  Assembly version: 1.0.5318.28514
  Win32 Version: 1.0.0.0
  CodeBase: file:///D:/Program%20Files%20(x86) /FIFA%2015%20DEMO/fifasetup/DXHelper.DLL
  ----------------------------------------
  System.Core
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
  ----------------------------------------
  System.Xml
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  Hi Joannespereira,

  Thanks for posting the request in Microsoft Community Forums.

  This problem normally occurs when there is no problem of compatibility between the game and the operating system.

  I suggest you make sure that you install all the updates through Windows updates, including those related to the .NET Framework.

  You may have more updates in this article to obtain the form help EA support.

  We are aware of a .net Framework error some FIFA 15 players have experienced during the launch of the PC demo. Our team is studying the issue and is working on a resolution to help you get back in the game.

  http://help.EA.com/en/article/FIFA-15-NET-Framework-error-when-launching-the-PC-Demo/

  Hope this information helps. Response with status so that we can help you.

• I get the diagnosis "Windows Media PLayer cannot play video DVDs. You may need to adjust the display settings of Windows ", etc. But I can also not help & Support 'because a system service is not running.

  The problem may be something that I deleted, but I can't go in the system restore back to an earlier time

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  3. when exactly you get the error message?

  4 are. what system service you referring? What is the full and exact error message?

  5. what happens when you try to do a system restore?

  See the link and check if it helps:

  Windows Media Player Error Message help

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5268&ID=C00D116A&ContextId=83&OriginalID=C00D116A

  If the problem is not resolved, please provide more information to help you best.

• Windows Media Player cannot play back the video DVD. I use windows XP SP3.

  This morning, I looked at half way through a movie ~ this afternoon, I get this message arghhhh! I went in circles, trying to find the solution ~ HELP Please!

  I tried to send a msg, but she was fired!

  I am now able to use my Media Player ~ I didn't do a system restore to the day before! I think it must be something to do with a windows auto. update ~ but I'm not 100%!

  It is the work that is good enough for me!  Thank you for taking the time to help ~ I appreciate your comments.

  All the best

  Husband

• Windows Media Player cannot always find the info to the album by tearing or playing

  I really like WMP (very flexible features, changes and types of rip)... BUT the music identification software is horrible. You type the name of an album (because it will not appear) and the search function will give you pages on visits that are not even close. You type in Santana and might get the IDS of several firsts as suite Vivaldi Saint something or other, which? Maybe on the next page of hits that you could find the album you typed in and exactly how you typed it, huh. Why wouldn't be the first shot? This search feature is how stupid? For example. I could type in Masters of Classical Music Vol.1, Mozart, and it will give me all MCM volumes but the one I want. Get rid of the vol.1 or Mozart, or both, and you have the right ID even faster, what? Many of the volumes MCM yielded no ID of classical music at all, what? Was a time, you can click Update music info. and get the ID/album art correctly most of the time. How can the system ID is worserer over time instead of better.

  I tried to do some of the things I like to do with WMP NERO9 and Nero9 turned out to be much less flexible, but the Gracenote ID system has a very high success rate 99 percent to get the ID of music correctly tagged for songs and albums. AND I don't need to hunt for the news of the album that is already in the database somewhere. The version of Nero on my laptop does not burn WMA lossless or 320 kbps mp3.

  So, I guess my question is, are at - it a trick to get WMP albums ID with precision and without me having to hunt through independent music lists? With no luck, I have disabled the Windows Firewall. Furthermore, this isn't a victory op sys. problem, because all oenological practices (11 or 12) of 7/Vista/XP all are terrible to find the data of the ID. I cringe every time that I try to copy a classic CD, because many times you will need to enter all the data from the massive album manually for a single tear. Data entry takes way longer than the period of investigation. Yes, it sucks. Rock albums are easier to obtain, but not always easy.  Creative, included at the same time, a software suite that was very good, but over time, they forced now to buy some of these subtleties with their sound cards.

  Anyone has any ideas on this topic?

  Hi Waynesalo,
  As you may know, the Microsoft answers Forum is a community of users of Windows software that contribute and answer questions to help each other. It isn't a developers or programmers (unless you want to register) forum at all. However, there are many developers and programmers forums out there that deal with more complex issues such as you pinned. If you want to dive into the more detailed questions, you can start with one of the links below:
  http://TechNet.Microsoft.com/en-us/library/bb490842.aspx
  http://blogs.technet.com/b/Win7/archive/2011/04/05/new-included-music-files-are-not-displayed-in-Windows-Media-Player-library.aspx
  Secondly, I understand the problem you are running into. As a DJ part-time, trying to find some hip-hop and R & B songs is almost impossible. You can watch the server so that the news of the album are pulled. If I remember correctly, you have the choice of three. I found this not have all the information I'm looking for, so I settled on a cause it's less time consuming enter my settings and change this server info each time. Now, I don't know if you have the possibility to change this information in WMP 11 or 12, I use an older version.

  In addition, if you want to talk directly to Microsoft of its products, let me suggest this link:
  This is a link to Microsoft Connect, where you can leave your comments to improve the Microsoft products:
  https://connect.Microsoft.com/site831/feedback
  I hope this helps.
  Eddie B.

• Windows Mobile 10: cannot play back the video. AVI

  Can play mp4 ok, but only noise and no picture during playback. AVI

  It works, I should have read the instructions in the application. I should have connected to my pc and copy the videos to my phone using the recommended to convert and copy. Can now play my videos on my phone, but it would be easier if this conversion could be made directly from oneDrive.