Error when you try to save the PDF in Acrobat Pro

Similar Questions

• error when you try to save the .ai file

  Hello

  I created a business card in Adobe Illustrator CS2 and now I want to change my email address on the map. I did this and tried to save it, but when I made this error message came:

  "There is no path.

  I don't know why it does this. I want to be able to edit and save more later on if need be then, how can I fix? Ideas, any help would be greatly appreciated. Thank you!

  ashmic19

  Check your paths of old type, retype you the original line on or did you press return back on the orig line until there was nothing out there, created a new line of text and type in the new address?

  That's what I think might happen watch in work/overview.

  Try to Clean up, remove unused marks.

  Also check your hard drive, you're out of space?

• Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to assist with co

  Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure.  I tried to convert the document integer and same result.  Specifically, I bought the feature export to Word.  Please help.  I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.

  Hi sdr2014,

  I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.

  So, let's try this:

  If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.

  Please let us know how it goes.

  Best,

  Sara

• Error 'UID without owner referenced. ' UID: U3020 class: ImageItem "when you try to save the site Muse CC converted in 2014 of the Muse

  Error 'UID without owner referenced. ' UID: U3020 class: ImageItem "when you try to save the site Muse CC converted in 2014 of the Muse

  It works very well in my CC version. But will not let me save my old site. Everything I do is open and it says converted and record that it won't do anything and I tried everything

  I suspect that you have purchased the model 'AgencyVisual.muse' of the forest of theme? It seems that this file contains minor corruption which requires repair by the development team. We have tried to contact the author of the model to see that the original model is repaired, but have not yet received any response.

  If you send your .muse file to [email protected] as well as a link to this topic, we can repair the file and return it to you.

• get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  This forum is for Microsoft Security Essentials.

  You question is with Oracle Java.

  It is recommended to go to www.oracle.com to get help.

• Windows XP SP3: Access denied error when you try to change the beginning upward in MS CONFIG. Director of applications but I am the administrator.

  original title: access denied errors when you try to change the beginning upward in xp sr CIP 3 msconfig. I am the administrator, please the administrator

  I am a user with privileges under windows xp pro service PAC 3. I recently received an access denied error message acusing me of not being the administrator when I tried to limit the start up programs in msconfig. What should I do these changes in safe mode?

  You have scanned your system for malware? It seems its infected with something. Download ccleaner install / run. Then go to tools / startup. Delete the entries that you want here

• Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems) in Vista

  Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems). It keeps failing even though I followed the steps all the recommended (in aid) and installed some other stuff.  Tried several times but nothing helped.  I saw a recommendation to install a Wups2.dll file but do not know if I should do it because the recommendation is for Windows XP and I have Vista Home.

  Hello

  I suggest check the link below and try do a SFC (System File Checker) scan and check if it helps.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I would also say that you reset Windows update components and check if this may help.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Error when you try to play the game: memory access violation

  memory access violation

  I have redownloaded a game that has been previously loaded on my computer, now I get this error when you try to play the game "Memory Access Violation".

  Your sound card that is more than adequate.
  If the game was previously installed and worked fine then maybe it is not been completely uninstalled.
  I suggest you uninstall the game, look in the registry for any left over entries that can refer to the game.

  Then restart and reinstall the game.

  Alternatively, you can try to install in compatibility mode. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know if that helps.

  Marilyn

• Error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I am trying to set up Parental controls for the user account of my son and I get the following error: error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I tried to use the administrator account.

  When I ran the System File Check sfc/scannow

  TI completed indicating certain files may be damaged and cannot be repaired and check the convertible bonds. LOG file.

  How can I know which files are corrupted.

  Any other Suggestions on how to fix this user profile?  Do I have a profile that I don't know?

  Hi wimuggss,
   
  Step 1: Disable UAC (User Account Control) and check the result
  See How can I change the behavior of user account control by using the cursor?
  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.
   
  Important: Enable UAC after you complete the steps.
   
  Step 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
  See Start your computer in safe mode
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lightroom will stop when you try to save the image to the Gallery

  Lightroom will stop when you try to save the image to the gallery. It just stops without warning. And he always seems to be synchronization?

  I have a Huawei p7 Please help!

  Hi AnnCicilie,

  Make sure that if the application is up to date.

  If this does not help, could you please share the newspapers of diagnosis by PM so that we can check more?

  Follow these steps to collect logs:

  • Open Mobile with Lightroom application
  • Click on the LR icon at the top left:

  

  • Press and hold the Lr icon at the top left that mentions your Adobe ID and click on generate Diagnostic log

  

  • Send email to yourself so that you have them on the desktop and then, share with me by PM

  Concerning

  Claes

• Disabled-Adobe Acrobat 9 Pro on old PC. Implementation error when you try to install the new PC. "Invalid serial number."

  Disabled-Adobe Acrobat 9 Pro on old PC. Implementation error when you try to install the new PC. "Invalid serial number."

  Please see the following documents.

  1. Error "invalid serial number". Acrobat 9 | CS4
  2. Invalid serial number error

  Let us know if that helps.

• Error when you try to view the application latencies

  I'm not able to get see Planner to latencies report application series of tests with multiple virtual machines in them. If I run a test that has 3-2 VMs in it while I'm able to view the results of the trial very well, however when I try to run tests with more of that I get errors when I try to view the results. When I try to load the web page results to see Planner, nothing happens, and I get the following error in viewplanner.log:

  2012-10-24 20:16:13, 025 INFO {}
  Unhandled error
  Traceback (most recent call changed):
  File "/ usr/lib/python2.6/site-packages/twisted/web/http.py", line 773, requestReceived
  Self.Process)
  File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 127, process
  Self.Render (resrc)
  File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 147, in rendering
  body = resrc.render (self)
  File "/ usr/lib/python2.6/site-packages/txjsonrpc/web/jsonrpc.py", line 112, rendering
  () defer.maybeDeferred(function,_*args).addErrback
  -< exception that is caught here >-
  File "/ usr/lib/python2.6/site-packages/twisted/internet/defer.py", line 133, in maybeDeferred
  result = f (* args, * kw)
  File "/ tmp/ViewPlanner/web_interface.py", line 527, jsonrpc_getResultsMap
  File "/ tmp/ViewPlanner/mysql_interface.py", line 571, in getTestAverages
  exceptions. KeyError: 0

  When I try to manually execute the python script statement, it tells me that there is no result for the test.

  I just ran a test locally with 276 VMs, according to viewplanner.log, all 276 VMs transferred their results to the device. Yet I still get this error when you try to view the results.

  I tried to create new images GoldenDesktop and GoldenClient, as well as deployed a new device see Planner and reinstalled all of its agent programs, nothing helps. Anyone know what could be the cause?

  We have seen this issue for large series and I attach a patch file that you can overwrite the/root/ViewPlanner harness directory and then restart the vdiappd service, and then you can give it a try.

  For manual results extratcion by using the report.pyc script, you must use '-j' I ' and '-j' operations if you ran just 1 iteration of the workload.

• Error when you try to install the browser first elements 10 Inspiration

  On the Adobe Premiere elements 10 welcome screen, I get an error when you try to install the browser of Inspiration (IB).

  Sorry, an error occurred.
  This application cannot be installed because this installer has been misconfigured. Please contact the

  author of the support application.

  I have uninstalled/reinstalled the latest Adobe Air. I have connected to photoshop.com while trying to install IB as well.

  OS = Windows 7 64 bit

  Adobe products installed

  Photshop CS5

  Lightroom 3.5

  Thank you

  The team and I worked to create this document on the issue. Can you try the solutions listed and see if it solves the problem?

  Can not launch/install Inspiration browser from the home screen. First 10 items | Win 64 bit

  http://kb2.Adobe.com/CPS/926/cpsid_92680.html

  -Dave

• I 200918 error when you try to save a task DAQmx

  I have a Labview application 7.0 that creates and registers a task DAQmx (DAQmx version 8.0).  I can create a new task, but when I try to save the task I have Labview 200918 internal error. So far, this has worked very well on several machines but recently received this error message on a new Windows XP SP3 machine running.  I am able to create a backup task by using MAX (version 4.3).  Anyone know this kind of error before?

  Kind regards

  David

  This code corresponds to what is now an external error code.  The text of the error is:

  "Global channel name specified is already used for a task in the area of data.  NOR-DAQmx does not support global channel names and overlapping tasks.  Select another name. "

  I don't know why this code appears as an error internal to you, but the new text of the error, you should get going.

• Blue screen error when you try to print Adobe PDF files

  Original title: the computer crashes when I try to print Adobe PDF files.

  I unintalled and reinstalled remains 9.3.3 and it still won't print. The OS crashes when you try to print a .pdf file. I can open the document and view the file but not print, just the blue screen and restarts. I opened a word document, print and print text files. It will print anything but Adobe files. Is there any help out there?

  HonoriusIII

  Thank you for your support and help Sicard. I finally got to the last version of Adobe as the culprit. It seems that the latest version 9.3.3 was causing problems. I uninstalled the software, cleaned the registry and other remains and installed the various editions of Adobe. Seems that Vista likes only one software version which proved Adobe 8.0. Once I installed the software, found a few .pdf documents and tried to print. Not only did it print well, it was very fast. Of all the places to find the 8.0 Adobe has been installed on my recovery disks. I don't think Microsoft product (s) are the root cause. Something in Adobe was the cause of the crash. I have the error message has not write against accidents, but it dumped memory and restart is fine, no conflict of driver. Only thing I did after each accident was to defragment. the hard drive and RAM by using certain tools. Vista ran fine since. I know a lot of people out there do not like Vista, but I did have a lot of problems with the software. I found problems with other types of competing software and work with software developers using their products in beta. The crash of the problems were not these beta products. I believe in keeping software simple and effective, it seems that Adobe will conversely making it too complicated software and an application's entire concept.

  Thanks for you help,

  HonoriusIII