Error when you try to start Windows Live Messenger: this application didn't start because the d2d1.dll is not found
I get this error for windows live messenger when I start msn _ (THIS APPLICATION COULD NOT START BECAUSE it could NOT FIND a d2d1.dll, PLEASE REINSTALL AND perhaps THE PROBLEM will BE SOLVED))
I HAD A PROBLEM WITH MSN
1. I DID FORMAT MY PC AND I START FROM THE BEGINNING
2. I DID ALL THE UPDATES
3. I INSTALLED WINDOWS LIVE ESSENTIALS 11
4. ONCE I INSTALLED WINDOWS LIVE ESSENTIALS 11 I BEGINS AND IT WORKS WHEN I REBOOT MY PC AND I START IT AGAIN, I GET AN ERROR SAYING
(CETTE APPLICATION POURRAIT PAS DÉMARRER parce QUE ne pourrait PAS TROUVER UNE d2d1.dll que s'il vous PLAÎT RÉINSTALLER ET PEUT-ÊTRE LE PROBLÈME SERA RÉSOLU)).
WHAT IS THE PROBLEM?
PLEASE LET ME KNOW THAT I DON'T KNOW WHAT ELSE DO
Not certain how much this will help, but Windows Live questions should be handled by Windows Live Solution Center.
This is the Windows Live Solution Center Portal:
http://windowslivehelp.com/
I hope that you will get a resolution from the experts here.
One thing... they aren't this quick response to questions. I said that my personal experience. So, be patient. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
Tags: Windows
Similar Questions
-
Error when you try to install Windows Live Messenger: 80070003
I recently reinstalled my windows home edition 2002 sp2 exp, I tried several ways to install windows live messenger. I tried to get into the local users and groups, but windows xp home edition is not this feature, I tried to download does not work yet for registry cleaners. Can you please give me all the possibilities for this solution. I've been stuck here for at least 6 hours. haha thank you very much.
Hi vincentShinoda,Follow the suggestion given in the below post and check if it helps in fixing the issue:If that doesn't work, post your query in Windows Live Messenger Forums for assistance on this issue. -
I get errors when you try to download Windows Live Messenger
Original title: HelloHey iam trying to download windowslive messenger for my pc and an error has occurred
I have Windows XP Home Edition Version 2002 Service Pack3Submit all Live queries on the forum right here:
Windows Live Solution Center
http://windowslivehelp.com/ -
Original title: oleaut32.dll xp
My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
However, I can't in the operating system to do a re-install.
Any suggestions?If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:
Lsass.exe - Unable to locate component
This application has failed to start because the OLEAUT32.dll file not found. Reinstalling the application may fix this problem.If the missing file is the only problem, you might have to do a reinstall to fix.
There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.
Once started in the XP Recovery Console, you must enter this command at the prompt:
Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32
If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:
Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32
Answered in the affirmative if invited to replace any existing file.
I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you. I think that the MSE is just throw a few things to try and some links. You don't describe symptoms consistent with the need to use one of these methods. I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.
If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).
Here's how:
Boot into the Recovery Console Windows using an XP bootable installation CD.
If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.
This is not the same as recovery disks that might have come with the acquisition of the system store.
You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
The ISO bootable image file you need to download is called:
xp_rec_con. ISO
Download the ISO from here:
http://www.mediafire.com/?ueyyzfymmig
Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:
When you install ImgBurn, DO NOT install the Ask toolbar.
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When you start on the CD, follow the instructions:
Press any key to boot from CD...
Installing Windows... going to pronounce.
Press 'R' to enter the Recovery Console.
Select the installation that you want to access (usually 1: C:\WINDOWS)
You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the
C:\Windows folder that you see in Solution Explorer.
The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.
For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.
You have not to set the BIOS to boot the disk HARD since the CD won't be.
-
MICROSOFT ERROR REPORTING
HR:0 X 80070641, I get this error when trying to install windows live messeneger for windows xp... any help please would be nice I have windows install 4.5 installed and it works fine. so it is not and I've tried everything I can think of any help please and thank you!
Hello
The question you have posted is better suited in the Windows Live community forums. Please visit the link below for any other help:
-
I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
One of the installation files seems to be corrupted. HR:0 x 80070003Hello Amawob,
Thank you for using the Microsoft answers Forums.
Solution:
You cannot install some programs or updates.
http://support.Microsoft.com/kb/822798
Reset the Windows Update components.
http://support.Microsoft.com/kb/971058
That should solve the problem for you.
Thank you.
UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO
-
get the fatal error when you try to start Windows 7 Easy Transfer...
get the fatal error when you try to start Windows 7 Easy Transfer... what should I do?
Hello Jo,.
Thanks for posting your question on the Microsoft community.
We need more information about the issue so that we can help you better.
What is the full error message or code when you say, ""getting fatal error when you try to start Windows 7 Easy Transfer? '"
Thank you for details on the issue.
This problem may occur because of damaged or missing Windows files.
I suggest you run the system file checker (SFC) and see if it helps.
Reference:
Use the System File Checker tool to repair missing or corrupted system files
https://support.Microsoft.com/en-us/KB/929833System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.
I hope this information helps.
Please let us know if you need more help.
Thank you
-
Windows Live Messenger
Why when I try to open Windows Live messenger, a box appears saying that it is the side by side configuration is incorrect and see the application for the error log?
Hello and welcome to help of Microsoft answers forums dealing with mainly applications Microsoft Windows or Windows installed and used on the local computer. You will be able to get a faster and better informed the answer to your question by posting in the forums help of Windows Live . Follow one of these links: -
Error when you try to access my library in CC saying "unable to connect to the server.
I get an error when you try to access my library in CC saying "unable to connect to the server" - is there a solution? I can view them on the web app, but can't access it when I open Adobe Illustrator or other Adobe programs. Help, please! The error appears when I hover over the icon to the left of the trash.
Hello
Please, try the following steps:
- Close all applications CC
- Complete the process monitor activity/task manager (CCLibrary).
- Restart any application and check.
Hope that helps!
Kind regards
Sheena
-
Original title: SPWIZENG.dll
Hi, I got a cd of Windows 7 from my friend who is a software engineer so he gets all the programs (operating systems). It burned in a DVD instead of CD. So, every time I try to load from the DVD the error appears as:
«The application failed to start because SPWIZENG.» DLL was not found. Reinstalling the application may fix this problem. »
Then when I click ok, it says:
The file 'Autorun.dll' could not be loaded or is corrupt. Setup cannot continue.
Help, please. I'm not good with computers and I honestly don't know what to do.
Thanks in advance,
:)
Hello
Are you able to play or open other CD or DVD?
Step 1: These error messages may be due to corrupted media. Try to use the same media on another computer and check if you are able to use it.
Step 2: Search for the issue in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-upgrade-windows-7-error-code-0x7e/b1bfbe8f-7980-4847-a186-2206e87c6bc4
-
Windows Mail could not be started because MSOERES. DLL is not found
Original title: Windows Mail
I use Windows Vista and I suddenly have the following problems, when I try to open Windows Mail, a message
«Windows Mail could not be started because MSOERES.» DLL is not found.
Also, I noticed that all my games of Microsoft Windows have disappeared at the same time, ideas? : Monty
Hey Monty,
Follow the suggestions below for a possible solution:
Method 1: You can go ahead and perform a restore of the system to a point before the show, then check to see if that fixes the problem.
System restore
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Method 2: I suggest you perform a system of operating in Place Upgrade to Windows 7 and check if that helps. See the following link for upgrade on site.
How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.Microsoft.com/kb/2255099
Note: You can take backup of the data on an external hard drive that you can lose data when you perform the upgrade on the spot. It is essential to back up data even if you do an upgrade on the spot.
Let us know the results.
-
Original title: APPS
WHEN I TURN ON MY COMPUTER, A BOX IS DISPLAYED THAT SAYS: "THIS APPLICATION COULD NOT START BECAUSE BHO.» DLL WAS NOT FOUND.
REINSTALLING THE APPLICATION MAY FIX THIS PROBLEM... The APP IS ie3sh.exe... I DON'T REMEMBER TO UNINSTALL ANYTHING... I have
THE THING OF RESTORATION WHERE YOU PUT THINGS BACK THE WAY THEY WERE AT A CERTAIN DATE... BUT THAT WAS BEFORE THE
MORE DATE OLD HE SAID I COULD GO BACK, WHAT HAS NOT HELPED... I ONLY AM NOT COMPUTER SAVVY, SO IF YOU HAVE AN ANSWER, PLEASE
BREAK IT DOWN STEP BY STEP... P.S. THANK YOU I USE WINDOWS VISTA HOME PREMIUM... AND I INSTALLED ALL IMPORTANT
UPDATES... I HOPE I'M THIS SENDING TO THE RIGHT FORUM...
I suggest you to follow the steps below and check if it helps:
Method 1: Try to boot in safe mode and check if the same problem occurs.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Method 2: If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Method 3: Also try to scan your hard drive for Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Hope this information is useful.
-
Only get a blinking cursor when you try to start after the installation of updates
Original title: blinking cursor when you try to start
After installing Windows updates last night, our laptop Dell running that Vista gives only a blinking cursor when you try to start
Hello
1 update you tried to install?
Step 1:
You can check out the following link and try the steps.
Step 2: When you're able to start normally, check the history of update to discover updates failed as a result of the article:
See the Windows updates are installed
Step 3:
If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.
a. to download updates from the Microsoft Download Center
b. Enter the item number in the field search and download the same.
c. double-click on the downloaded file.
d. click on run and follow the wizard to install it.
Hope this information is useful.
-
Error "Live service is not available" when you try to play Windows Live
Original title: when I started Tinker or Dawn of War 2, he asks my Windows Live username and password. So I enter, but then it says that the live service is unavaibable. What can I do to get it to connect?
Hi megasharp,
See the following articles from Microsoft for troubleshooting connection problems:
Games for Windows LIVE: Games for Windows LIVE to a game connection errors troubleshooting
Games for Windows LIVE: you can not connect to LIVE and you receive an error message
See also GFWL: Guide for the mistakes of general technique for Games for Windows - LIVE
If the issue is not resolved, contact live customer support:
Gokul - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Error when you try to start iTunes: application not found Apple support
How can I download apple for windows vista support
I am trying to download itunes & when I try & open it he says, apple support application is not found, then how do I get itunes to start working again?
Hello safy97,
Do a search for your message of error, grown from a Forum of Discussion Apple with your same error message. See the post below. Several users used the Cr4z33 solutioin and have managed to have installed iTunes and work.
http://discussions.Apple.com/thread.jspa?threadID=2151777
If this does not help, I suggest you post in the Apple discussion forums. I have included a link below.
http://discussions.Apple.com/forum.jspa?forumid=792&start=0Sincerely,
Marilyn
Maybe you are looking for
-
How to transfer pictures from iphone to PC and keep the date, time and place
How to transfer pictures from iphone to PC and keep the date, time and place
-
Inline installation is to the Safari extensions?
Hello! I am Lions to understand if there is a way to allow an online installation for Safari extensions by a button of the CTA. For example, on Chrome, can I have a CTA button on my Web site that when clicked, will open a pop-up window of the SCF and
-
Satellite P770 - helps the touchscreen, backlit screen and Functionkeys
Hey, I come from Germany and I need your help! So be patient with my broken :) English My problem is, I have my own version of win 7 and downloaded all the drivers, but 3 things are missing, because thereplace. First of the drivers for the backlit an
-
Program Microsoft Greetings Workshop
I have a Windows greetings biomedical program that I bought in 1996. I haven't used it for a short while and when I tried to use it today the message I get is 'I have problems with a database." I have reinstall the program, but has exactly the same
-
I want to reset the new product key for my windows
I have a laptop. I don't have a CD player. MY microsoft in genune software. I also have the product key. but after farmatting he I din't keep my old porduct key. relax him now system update it says product key is not valid. I want to restore my orig