Error when you try to use VoIPBuster to place VoIP calls: Client for VoIP calls has stopped working. Windows is checking for a solution to the problem.

Client to make VoIP calls

I recently started having problems, make VoIP calls from my computer.  I use VoIP Busters (and using it for a few years without any problems).  Evertime I try to call the destination phone rings a couple of times and then stop.  The next thing that happens is an error message that says: "Client for VoIP calls has stopped working.  Windows is checking for a solution to the problem.  It is followed by another screen that says: "a problem caused blocking the program working properly."  Windows will close the program and inform you is a solution available. "  Nothing happens.  How to overcome this problem.

Advertisement

I finally had to resort to the re-installation of Windows.  This solves the problem.  But don't forget to back up your computer and email address / addresses before you do.

Tags: Windows

Similar Questions

  • When you access the virtual machine, getting the error "encountered an error when you try to use one of its virtual hard disks". Help?

    I received the "low disk space error" on a hard drive of the virtual machine dynamic expanding. I have increased my space of virtual hard disk using "My Computer" > manage > storage > "Disk management" and choose "Attach VHD" then resizing to max available (64 GB), and now I can not start the virtual machine. It gives the error: encountered an error when you try to use one of its virtual hard disks. Help?

    Hi NatalieFoster,

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums to get help:

    Windows 7 Virtual PC and XP Mode TechNet Forums

  • When I try to use the webcam with Skype it blocks Skype and said "Skype has stopped working, windows is checking for a solution."

    Original title: lifecam 3000 and Skype does not?

    Hello, I tried the two 5.5 beta and 5.3. When I try to use the webcam with Skype it blocks Skype and says "Skype has stopped working windows is checking for a solution." I have windows update connection bars 4/5 drivers and my computer ==> http://www.newegg.com/Product/Product.aspx?Item=N82E16883103361 help is appreciated, thanks

    Hello, I had just fixed yesterday. I deleted the drivers and programs that accompanies it, it ends up being the lifecam software that comes with it interfering with Skype, thanks to all who help :)

  • Error when you try to use SQL Express 2012 import/export wizard

    When you try to use 'Import and data export' Wizard SQL Server 2012 Express with Advanced Services, I get the following error message:

    I tried everything I can think of. I tried to copy this .dll on various windows system files, by registering the .dll file, even tried to not downgrading from SQL Express 2016 until 2012... no luck, still the same problem. I tried everything on at least the first five pages of a Google search. I am running it in a box of Windows 7 Pro 32-bit. I used the x 86 version of SQL Express 2012 with Advanced Services and all the features were installed during the installation.

    Any help would be greatly appreciated.

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • 2072 AND 2126 ERROR when you try to use the printer

    ERROR 2072 AND 2126 WHEN YOU TRY TO USE THE PRINTER?

    Hello

    1. What is the brand and model of the printer?

    2. What is the exact error message you get?

    3 when was the last time you were able to use the printer?

    4 did you a recent software or changes to the material on the computer?

    Method 1:

    I suggest you to go through the steps mentioned in the link and the Coachman.

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    If the issue does not get resolved, then you can move on to method 2.

    Method 2:

    Tips for solving common driver problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    Hope this helps and keep us informed if you need help.

  • Why do I get an error when you try to use a link in the forum?

    I just tried to use the link that city offered to redirect some users with the login procedure and I got an error:

    The thread specified [0] was not found.

    I had the same thing when you try to use a similar connection a few days previously. They sound like something that I could benefit from it, but I can't ' get to them.

    The URL looks like to Re: logon username determines the page that opens, how can I achieve this?

    Any ideas?

    Thank you

    Gregory

    P.S. I'm using Firefox 3.0.4

    Yes, if you delete the character of diamond, you are directed to a thread in the APEX support forum...

    Thank you

    Tony Miller
    Webster, TX

  • 'Could not complete your request because of a program error' when you try to use an effect

    Hi all

    I looked and can't seem to find the ansewer to my very annoying problem. When I try to use the options and the effect in the layers palette, I get the annoying message:

    «Could not complete your request because of a program error. '»

    Anyone using these tools met and someone found a solution for this. It was working fine, then it's funny. I rebooted my machine, photoshop and re-installed the software but stiill not fix. STI is very annoying that I use every day these options in the work that I do.

    See you soon.

    Jon

    You could try resetting the preferences of photoshop:

    http://forums.Adobe.com/thread/375776?TSTART=0

  • Error when you try to use the webcam: Please plug in a supported WebCam

    camera on my Dell

    When I try to use the camera on my Dell, message says "please connect WebCam supported.  How can I do this?  The device worked and now it isn't.  I must have changed something when I added the new router.

    You need to reinstall the driver for the webcam.

    Visit the Dell Support Web site, download and install the compatible webcam driver.

  • Error when you try to use the webcam: host process Windows stopped working-RUNDLL32

    RUNDLL32

    Whenever I use the webcam on my computer, he brings a message as follows:

    WINDOWS HOST PROCESS (RUNDLL32) HAS STOPPED WORKING

    I can still use webcam with no problems, but I have to cancel and close this message

    What is this error, why this is and how can I solve this problem

    Whenever I use the webcam on my computer, he brings a message as follows:

    WINDOWS HOST PROCESS (RUNDLL32) HAS STOPPED WORKING

    I can still use webcam with no problems, but I have to cancel and close this message

    What is this error, why this is and how can I solve this problem

    I read this from an old thread in this forum.
    Here is the suggested solution...
    Disable the webcam.
    Start button > Control Panel > Classic view > Folder Options > view > first entry,check "always show icons never thumbnails" > OK.

    Open your Webcam again. The message is passed now?
    If so, turn off the webcam.
    Back to Folder Options > uncheck the first entry "always show icons never thumbnails".

    Open the webcam again. The message comes back?
    If not, problem solved.

    Source:
    http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/46d915fb-E470-41c6-A4de-dc56d05e258f

    t-4-2

  • error when you try to use MAKE as "open collector" on PXI-6602

    When I try to set one of my PXI-6602 as "open collector" I get the 200452 error ("" measures: specified property is not supported by the device or is not applicable to the task. ' "). It is completely mysterious to me because the PXI-6602 should have this feature and my code (see attachment) is virtually identical to one of the many examples in this topic. I forget something really stupid? (LV 8.5, PXI-8145RT) Cheers, uli

    Hi uli82 *,.

    The error message is correct. The PXI-6602 can't stand not to DO. Property of OutputDriveType. If you want to set up DIO of the PXI-6602 lines to a high impedance state, use the DO. Tristate property or create a digital input channel.

    Configuration of a DIO type open collector line drive would cause to write a 0 to drive the 0 V line and cause to wrote a 1 to three States of the line. If this is the desired behavior, you will have to imitate it using c. Tristate property.

    Brad

  • Error when you try to use the system restore: 0x8004230f

    whenever I try to open system restore, I get the error code 0 x 8004230f, I did the SCF scan to see the number of files that could not be fixed what should I do now?

    I installed Norton utilities 2011 & Norton anti virus

    Hello

    There are a variety of reasons for system restore problems

    Norton and Norton product Tamper Protection is the main

    Read about it:

    http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    You can try restoring the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    and malware can interfere with the restoration of the system

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  • HP Officejet 6600: Connection error when you try to use the Apps?

    I am trying to use the applications so that I can scan to e-mail.  When I try to open apps, I have a connection error.  I have run the wireless network test and all pass and the signal is excellent.  The eprint works very well.  I can't understand why I get a connection error when the wireless is configured and passes all the tests.  I tried scanning HP doctor thing and could not help solve it.  I'd appreciate any help.

    Thank you!!

    I had to delete web services and then add it again. Seems to work fine now. Thank you!

  • Error when you try to use FND_STANDARD. SET_WHO

    Hi all
    I'm new to the development of forms. I am tempted to write a form application to update a custom table in our database of EBS. In a before INSERT trigger, I have the following code:

    BEGIN
    FND_STANDARD. SET_WHO;

    SELECT seq_name. NEXTVAL
    IN: block.item
    FROM DUAL;
    END;


    When I try to insert a new record in the form, I get the following message is displayed:

    FRM-40735: prior INSERTION trigger raised unhandled exception ORA-06508.




    The table I am trying to update includes the following which columns:

    NUMBER OF CREATED_BY (15)
    CREATION_DATE DATE
    NUMBER OF LAST_UPDATED_BY (15)
    DATE OF LAST_UPDATE_DATE
    LAST_UPDATE_LOGIN VARCHAR2 (15 bytes)

    In my forms application, I have the following libraries attached:

    GREEN
    GLOBE
    I
    FNDSQF
    JA
    JL
    PQH_GEN
    VERT1
    VERT2
    VERT3
    VERT4
    VERT5

    I use Forms 6i.

    Does anyone have a solution for this problem?

    Any help would be greatly appreciated.

    Thank you.

    Hello

    I did not base my form on MODEL. FMB.

    Is it important that I start with the MODEL. WBF at the beginning of a new form?

    Yes - Please see the following documents.

    Note: 236803.1 - TEMPLATE.fmb opening error in forms Builder
    Note: 427879.1 - how to customize and compile an Application form (FMB) or library (PLL) seeds?

    Are there other libraries in addition to those listed in the original investigation that must be fixed.

    When I try to open the TEMPLATE. FMB, I get the following errors:

    FRM-18108: unable to load the following items.

    Source module: APPSTAND Source object: STANDARD_PC_AND_VA
    Source module: APPSTAND Source object: STANDARD_TOOLBAR
    Source module: APPSTAND Source object: STANDARD_CALENDAR

    AND

    FRM-10102: Impossible to attach the GREEN of PL/SQL library. This accessory of library will be lost if the module is registered.
    FRM-10102: Impossible to attach PL/SQL libarary GHR. This accessory of library will be lost if the form is saved.

    I have both these libraries on my local machine where I develop the form and they are in the path of forms.

    I have not yet tried to run this form on the server. I'm still developing top locally.

    Thanks for your help.

    Follow these steps:

    -Copy all the files of pll, TEMPLATE.fmb & APPSTAND.fmb of $AU_TOP/resources on your local computer (C:\ABC)
    -Add (C:\ABC) to FORMS60_PATH in the registry
    Open/Close Forms Builder
    -Open the form

    Note: 236803.1 - TEMPLATE.fmb opening error in forms Builder

    Kind regards
    Hussein

  • Access to the Internet and get a "atl100.dll" error when you try to use Firefox

    I just reinstalled Vista Home Premium and everything was going well for two days, but I can not access the internet regardless of the browser that I use and when I open Firefox, I got an error of "atl100.dll", I am afraid that my files cd, especially the .dll files can be altered, where can I find a good (and costs nothing) copy of the file atl100.dll? Please help as soon as possible. Thank you!!

    Original title: Re-installed Vista Home Premium and cannot access the internet & get a "atl100.dll" error when trying to use Firefox and IE just is not access to the internet either

    Hello

    1 did you changes to the computer before the show?

    2. What is the full error message?

    3. who is the antivirus installed on the computer program?

    4 are you using wired or Wi - Fi to access the Internet?

    5. What is the version of Internet Explorer installed on the computer?

    The possible causes:

    • ATL100.dll file is missing, as it was accidentally deleted from your computer
    • ATL100.dll file is damaged by viruses and your computer cannot access the file.
    • ATL100.dll associated with registry files is corrupt and obsolete.

    Perform the steps:

    Method 1: Perform a SFC scan on your computer to fix the corrupt dll files.

    Reference:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 2: Run a scan antivirus on your computer.

    www.Microsoft.com/Security/Scanner

    Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

    Method 2: Reset of internet explore and check. (If you use Internet Explorer)

    How to reset Internet Explorer settings

    http://support.Microsoft.com/kb/923737

    Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    For more information, see the links:

    The problems of Internet connection

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    I hope this helps.

  • BlackBerry Smartphones Firewall error when you try to use new applications of the AppWorld

    I have a BB "BOLD" (out of business).  When I try to register accounts with new App World, as SlackerRadio applications, I get this message:

    "The request... a attemtped to open a connection to a location inside the firewall and outside the firewall which is not allowed by your policy."

    Because I don't have a BB company, I'm not aware of any it policy or how I can adjust.  Everyone is having these issues?

    Thank you

    Jacquie

    • Carrier: AT & T
    • BlackBerry model: "BOLD"
    • BlackBerry OS (can be found in Options-> on): v.4.6.0.167 (Platform 4.0.0.157)
    • Version of App World (can be found by going to Options-> Advanced-> Applications) 1.0.0.28
    • BIS or BES (personal use or business use): BIS

    JacquieSamples,

    Just to be sure your BlackBerry is not a test of policy COMPUTER looking in Options-> Security-> General settings and scroll down to see if there is anything that is listed next to the field name of the IT strategy, if you see something there default even you have a COMPUTER policy.

    This article also shows how to reset a firewall prompt, you can have on your device:

    http://www.BlackBerry.com/BTSC/KB04050

    Please let us know if this solves your problem.

Maybe you are looking for