Error when you use Recovery Media Creator

Hello world

I hope someone can help me please.

We recently bought a laptop L750 and I tried 3 times to create the media recovery and just when I reach the end of the first diskette, it comes up with an error cannot write file or something like that, if anyone has experienced this problem and how they solve this problem?

Thank you very much

Nel

It's that you can't fix anything. Either it works or not.

In General, if your laptop is in the factory and you didn t change anything, creation of recovery disks should work fine. What you can try is the use of different blank media. I recommend you to use high quality as TDK or Verbatim media.

Please try again using one of these empty media.
And Yes, please only use DVD-R discs.

Tags: Toshiba

Similar Questions

  • I keep getting out of memory errors when you use Windows Media Player.

    original title: of memory error

    Hi, I have a Windows 7 PC brand new with 12 GB of RAM, but I get low on errors of memory, especially when you use Windows Media Player. I tried:

    -Execution of the antivirus scans

    -Cleaning things out of the startup folder

    -Increase in the size of paging file

    I can't understand what the devil is the cause of this error - as I said, it's a new machine, and is not practically nothing on it yet.

    Any help is appreciated.

    Hello

    Follow these steps and check.

    (a) open 'command prompt' as an administrator (programs, accessories, right-click "command, prompt" run as administrator).

    (b) type the following without the quotes and press ENTER.

    "for %a in (% systemroot%\system32\wm*.dll) do regsvr32 /s %a.

  • Satellite A660-13 q - error when opening of recovery media creator

    My problem is that: when I try to open the TOSHIBA Recovery Media Creator application gives me the following error: 'UNABLE to get information of the disk controller' with options accept or Cancel when I agree, and then gives the following error--> "there was an unexpected error. on this application and then restart it. Error code: 0d00f6-49-00000001 "then accept following error"there was an unexpected error. on this application and then restart it. Error code: 0d 0172-49-00000001 "then accept, the application opens correctly.

    Please, I need a respond to errors, thanks.

    Hey,.

    > Then accept, the application opens correctly.
    And then you can create the successful Toshiba Recovery disk?

    If you create the recovery disk properly it of not so important to me because normally, you start the program once and you will not need more.

  • "27049 internal error" when you use recovery with Equium A60-692 utility

    TOSHIBA SATELLITE A60 - 692

    I'm trying to fix a friends laptop. The laptop computer wouldnâ? t start, would go to the blue screen just before the came WinXP loading screen then will re-start. I used a USB 2.5 HDD enclosure "to copy important files on my laptop and then formatted the drive of my laptop. I put the HARD drive in the Toshiba and have used the CD of restoration via an advanced option. on exactly 9mins 50sec time on the recovery process, an error message appears (27049 internal error). After that, it goes to a screen of style BACK with a little more information. Essentially by specifying that the error is "cannot read FILE_BITMAP MFT entry.

    I cleaned the CD
    I swapped the CD drive with my laptop
    Quick formatting it formatted, it is full
    Used the basic option where it does itself and it ERRORS with - not enough space on the partition - there is no partition! or if there's empty sound

    What can I do?

    Hello

    I think that the HARD drive is broken, because if you receive an error message with words like "MFT" (meaning MasterFileTable) then you can expect that the HDD has serious problems.
    OK, easy to talk to it s fast without knowing the machine and so on, but I know a similar error and I can give you the advice to probe hard disk errors.
    You can do this with the help of the "ultimate boot cd" which is a very interesting tool when you need information about your computer or you want to just check if everything works well.
    Here´s the link to the downloadable CD image that should be on a CD:

    http://www.ultimatebootcd.com/

    Hope you can solve this problem...

    Welcome them

  • C00D11C8 error message when you use Windows Media Player

    How to fix C00D11C8 error messages when you use Windows Media Player.

    I've recreated the error on another computer running the same level of the OS and SP but received a more explicit error message telling me to get the codex of GoToMeeting.

    I downloaded the GoToMeeting codex and the problem was solved.

  • You met the C00D10D1 error message when you use Windows Media Player

    Hello

    I have no sound through Windows Media Player and also a player from Youtube and BBCi.  I have the following error message, please notify :-)

    You met the C00D10D1 error message when you use Windows Media Player. The following information can help you resolve the problem.

    Codec is missing

    Windows Media Player cannot play the file (or can't play the part of the file either audio or video) because theMP3 - codec MPEG Layer III (55) is not installed on your computer.

    The missing codec may be available for download on the Internet. For more information about codecs, seeCodecs: frequently asked questions.

    Hello
     
     
    1. What is the file type or extension that you try to play?

    If you get a message stating that your computer is missing a codec, you are probably trying to play, burn, or sync a file that was compressed by using a codec that does not include Windows or the default player. You will need to download codecs.
    Player Windows Media for Windows XP supported Codecs
    http://support.Microsoft.com/kb/291948
     
    Package of Installation of codec
     
    See also:
    Windows Media Player C00D10D1 error: MP3 - MPEG Layer III (55)
    http://Windows.Microsoft.com/en-us/Windows7/C00D10D1-55
     
    Note: The above are published in the Windows 7 category, but they apply to Windows XP too.

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • WMP has encountered an error while fire-"you met an error message when you use Windows Media Player".

    Original title: WMP has encountered an error when burning.  Check that the burner is connected properly and that the disc is clean and not damaged.

    I'm getting the above error message.  I tried at least 4 different drives and they are not the first discs I used this pack. also, I burned 30 + drives prior to receiving this message. When I click on the button "help", he says "you have encountered an error message when you use Windows Media Player.  Additional information is not currently available for this error. »

    Hello

    Have you made changes on the computer before this problem?

    I suggest you try these methods and check the status of the issue.

    Method 1:

    Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

    Method 2:

    Open the troubleshooter in Windows Media Player settings, run and check the status of the issue.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  • When you use the media player, it is possible to take a song that's already torn in our library and announced another song or part of the same song at the end? kinda like a mix.

    When you use the media player, it is possible to take a song that's already torn in our library and announced another song or part of the same song at the end? kinda like a mix.

    Windows Media Player is not a Publisher.

    You can use Windows Movie Maker to split
    and combine audio files, but it works better
    If they are in the. WMA format.

    Also the free Audacity software may be worth a try:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Audacity

    http://Audacity.sourceforge.NET/

    How to split a long recording into multiple files or CD tracks?
    http://Audacity.sourceforge.NET/Help/FAQ?s=files&i=split

    How to combine two files into one longer file?
    http://Audacity.sourceforge.NET/Help/FAQ?s=editing&i=join

    How to mix songs with Audacity
    http://www.ehow.com/how_5061510_mix-songs-audacity.html

  • No video when you use Windows Media Player.

    Original title: Windows 7 Media player

    When you use the MEDIA PLAYER to play videos I get only the first image and then only the noise that is not image.
    any Suggestions?

    Relevant convenience stores are available to-control panel, troubleshooting services, see everything [on the left], settings of WMP.  If you are online when you open it then it will be updated to the latest version of the troubleshooter before his execution [or you can go directly to the online http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooterversion].

    - - - - - - -

    Unless you run a K, N or KN Windows version [see Panel, System], then there is no download WMP.

    Regular updates of Windows include all updates for WMP [for example, the included updated Dec KB2847077 and that was a WMP update].  Ce KB is supposed to be a specific patch for WMP freezing, but some other recent messages indicate it fixed other issues while at least another post said that he created problems [problem WMP] and had to be uninstalled.

    - - - - -

    If you get completely fed up trying to fix WMP, then you can try these two steps [they are the closest thing possible to uninstall then reinstall WMP & will actually provide a new installation of WMP]

    14.1 discharge WMP - Panel, programs and features, Windows features turn on [left] on or off, multimedia functions, clear box Windows Media Player, Yes, OK, restart the PC.

    14.2 recharge WMP - control panel, programs and features, [left] turn features on or off, Windows multimedia functions, set the Player Windows Media box, Yes, OK, restart the PC.

  • IMAQ Grab Acquire.vi error when you use an external trigger on a card NI PCIe-1433 (sync problem?)

    According to my recent post on getting up and running with the NI PCIe-1433 camera link card, I ran into a bit of a snag.

    When you use the internal trigger on the camera, everything works 100%. I can view all the data from the camera in MAX as well as in the labview project. However, whenever I have set the mode switch is where things start to fall apart.

    What I have confirmed:

    -Camera is switching between inside and outside triggering.

    -NI PCIe-1433 camera link card is set up properly. While in external mode, I can trigger the camera by using a function generator and check the wire to the MAX. Everything works fine.

    When the unit is in external mode, the function Acquire.vi enter IMAQ - my mistake VI. The error is:

    Code :-1074397150

    The possible reasons for a timeout.

    Now, I have it set up so that a mistake here will not end the LabVIEW file. Sometimes, data of interest makes however (about every 10 seconds-ish). So what seems to be the case, it's that this external trigger signal is not in the lineup when the clamp is attempted. Is it possible to synchronize these? May reference the trigger signal external sort in my LabVIEW project so that the clamp is performed only when that trigger impulses?

    So I solved my problem. He was in time. The external trigger that I used for the device was simply too slow. I was initially using a trigger from 2 Hz to be able to view the values changing on LabVIEW probes. But it was enough to get enough data to move above the camera cable to assemble a picture and kept it in time. Travel up to 9 kHz solved the problem. No adjustment to the camera settings or LabVIEW code was necessary.

  • When you use Windows Media Center on the Xbox 360 DVD have not given chapter.

    After finally finding many questions I have my Xbox Media Extender and running upward and only this question left.

    I'm ripping my DVD to single file .vob she seems to like and plays very well, but it is only with the file movie and nothing else in the record.  How the XBOX sees it, the bed and he plays very well.  However I have no control outside the break and if I restart it takes over the job.

    Now if I rip my DVD with the .bup .ifo files in this folder the XBOX instantly he shoots in the list of the DVD and it will not play.

    When I use Windows Media Center on my PC it preforms even when the film is in the folder.  Then when I add bup and ifo data I can still play, but he has all data in the chapter that I need.  Shows all the chapters, allows me to jump as I please.

    How can I get my XBOX to behave like my PC?  I have to remove these 4 files in/out of the folder to see pop in and out of my list of XBOX.  How can I get the XBOX to validate data, so my movies actually have chapters and ignore the controls?

    Thank you

    Chris

    Hello, wilsman00

    As mentioned, by changing the VOB files, the data in the chapter are probably damaged. This can be confirmed by putting in a retail DVD in the drive and play directly from the DVD.

  • Scratchy Audio only when you use Windows media player

    For more than a month now, when I use Windows Media Player 11 to play any audio file, the music sounds saturated and rough. The volume is louder than normal. It is on a 5 year old XP PC, and I haven't added new software or hardware lately.  I can play the same files on the same PC with other readers multimedia (VLC Media Player or Quicktime) and I don't have this problem, and it's okay if I use headphones or speakers. I tried to uninstall WMP11, but WMP10 has the same problem, and when her reinstalled WMP11 still sounds bad. I have also reinstalled the codecs windows audio. Any ideas?

    Check the audio improvements and put them all turned off:
    Begin playing a file and then click the arrow below the now playing tab, point to enhancements, click show improvements and then go through each of the options.

    You can also check and disable plug-ins:
    http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-plug-in-to-Windows-Media-Player

  • TWAIN errors when you use Canoscan3200F on Win7

    I get error TWAIN when you use Canoscan3200F on Win7. Tried to use Canoscan Toolbox 4.5, Irfanview 4.32 and Windows Fax & Scan - all give variations of the TWAIN error, bascially do not recognize the scanner, even if it looks OK in Device Manager.

    CanonScan said - could not open TWAIN source.

    IrfanView, said - rmslantc.dll missing.

    Windows Fax Scan & said - no scanners not detected.

    Hi the string 1,

    Make sure that a certain folder path is in the PATH environment variable. Follow these steps:

    (a) first, to determine the correct path to add to the PATH environment variable.  Look in C:\Windows\twain_32 and there should be another folder (example:-CNQ4803). This is the way that is needed to be added to the PATH environment variable. C:\Windows\twain_32\CNQ4803

    (b) alter the PATH environment variable. Go to Control Panel, Systemand then choose Advanced system settings in the left column.

    (c) this will bring up the System Properties dialog box (it should already be in the Advanced tab).

    (d) at the bottom of this dialog box is a button Environment Variables .  By clicking on this button to display the Environment Variables dialog box.

    (e) in the bottom panel, scroll down until you find the variable named Path.  Select it and then press the Edit button to bring up the Edit System Variable dialog box.

    (f) in the Variable value text box, scroll all the way to the right, and then add the C:\Windows\twain_32\CNQ4803 path that was determined earlier.  Be sure to separate this value by a preceding semicolon.  And also be ensure not to make further changes to this value. Click OK.

  • get the error when you use the TRIM method in the collections

    Hi Experts,

    When you use the TRIM method I get below error. I make any mistake here?

    DB: Oracle 11g

    SQL > declare

    2

    emp_tab of type 3 is the employee table % rowtype index directory.

    4 l_emp_tab emp_tab;
    5

    6 start

    7

    8 select * bulk collect into l_emp_tab of employees;

    9 l_emp_tab.trim (5);

    10 dbms_output.put_line (l_emp_tab.count);

    11

    12 end;

    13.

    l_emp_tab. Trim (5);

    *

    ERROR on line 9:

    ORA-06550: line 9, column 2:

    PLS-00306: wrong number or types of arguments in the call to 'TRIM '.

    ORA-06550: line 9, column 2:

    PL/SQL: Statement ignored

    Thanks in advance for your help.

    See you soon,.

    Suri

    For PL/SQL collections "index by" you cannot use the TRIM function. If your collection statement excludes the portion "index of...» ", then you can.

    Gerard

  • Error when you use the feature Version «Back upward in a file»

    I run an error when you try to save a file version. The error is below to:

    There was an error trying to get the status of the job.

    1: the server returned an error during the processing of the action: CloseJob. Error message: String reference not set to an instance of a string.

    Parameter name: s

    As you can tell, he didn't give me much to do.

    Some background information:

    -J' trying to backup/export a version that has been upsized QA development

    -QA and development have the same version/patch 11.1.2.3.500

    -This version has been imported into the development, and then copied, and then mixed with a development version.

    -I did not receive any errors during this process

    -I am able to backup other files without getting this error

    Any help will be really appreciated.

    Thank you

    Aaron

    Hi Aaron,

    At first glance, it looks like there may be a string of property that is not a string data type. However, before you dig too deep, try to reload the version to see if that makes a difference. I had a similar problem before and it is solved.

    Thank you

    Jordan

Maybe you are looking for

  • Why the video file quicktime is not compatible with the dvd pro? and what can we do about it?

    export from fcp sequence to quicktime movie and impossible to open the file in dvd pro. Why is this and is at - there a way around this problem? better yet, why is-file quicktime video incompatible with dvd pro?

  • Xoom will receive the 4.2 JB?

    My wifi only U.S. Xoom will officially receive the JB? If it doesn't, will lock u its bootloader too like u did to my photon? coz I'm already done with motorola in cell phones, I would like that it wouldn't happen with the tablets as well. But honest

  • Timed Boolean switches with case structure

    I'm trying to implement a control for a switch that, when enabled, a signal of 'essential' lights up for 2 seconds and then turns off, as soon as the essential signal sat for two seconds that the VI should send say that the switch is turned on.  I ca

  • Laptop won't play CD/DVD

    Insert the cd in star slot, making noise and stop when

  • HP office pro 8600 - mailing printed envelope is biased.

    We strive print envelopes using mail merge.  We just bought the HP Office Pro 8600 a month ago.  The printer does not pull straight envelopes and if printing is not right.   Any suggestions at all - I really don't want use labels.  Is this a fault wi