error when you use the Export-CSV cmdlet

Hello

I get the following error when you try to pipe the output to a csv file

" Could not bind the parameter argument 'InputObject' because she's nowhere.'"

The output is placed in the csv file, but I get this error at the end of the script.

Here is the code:

##Variables

###################################

$report = @)

$CSVfile = "d:\Vm_Report.csv".

$VMs = get-vmhost | Get - VM

###################################

{foreach ($VM to $VMs)

$VMx = get-view $VM.ID

$HW = $VMx.guest.net

foreach ($dev to $HW)

{

foreach ($ip in $dev.ipaddress)

{

$report += $dev. Select @{Name = 'Name'; Expression = {$vm.name}},@{Name = 'IP address'; Expression = {$ip}}, @{Name = 'MAC'; {Expression = {$dev.macaddress}}.

@{Name = 'Property DL'; Expression = {$vm. CustomFields}}

}

}

}

$report | Export-CSV - NoTypeInformation $CSVfile

Thank you

The attached script implements the test of the $HW variable.

In my test environment, Export-Csv now works without any problem.

Give it a try.

Tags: VMware

Similar Questions

  • MAC address error when you use the New-VMHostNetworkAdapter cmdlet

    I try to use powercli to set up networks for a new 5.1 esxi.

    I get the error:

    The MAC address is not valid or is not in the range valid 00:50:56:00:00:00 - 00:50:56:3F:FF:FF

    The script I use:

    [CmdletBinding()]

    (Param

    [Parameter] [ValidateNotNullOrEmpty()] [string] $FQDNHostNaam,

    [Parameter] [ValidateNotNullOrEmpty()] [string] $IPManagementNetwork,

    [Parameter] [ValidateNotNullOrEmpty()] [string] $SubNetMask

    )

    $VSwitch = New-VirtualSwitch - VMHost $FQDNHostNaam - name vSwitch0 - Nic vmnic2, vmnic3

    New-VMHostNetworkAdapter - vmhost $FQDNHostNaam - Portgroup Management Network - VirtualSwitch $VSwitch IP - $IPManagementNetwork - subnet $SubNetMask mask - ManagementTrafficEnabled: $true

    This creates the vSwitch, but runs into problems when calling to New-VMHostNetworkAdapter. It gives me the above error.

    Anyone?

    And did you try with go seek the portgroup first?

    $pg = get-VirtualPortgroup-name of the "network management".

    New-VMHostNetworkAdapter - vmhost $FQDNHostNaam - Portgroup $pg - VirtualSwitch $VSwitch IP - $IPManagementNetwork - subnet $SubNetMask mask - ManagementTrafficEnabled: $true

  • get the error when you use the TRIM method in the collections

    Hi Experts,

    When you use the TRIM method I get below error. I make any mistake here?

    DB: Oracle 11g

    SQL > declare

    2

    emp_tab of type 3 is the employee table % rowtype index directory.

    4 l_emp_tab emp_tab;
    5

    6 start

    7

    8 select * bulk collect into l_emp_tab of employees;

    9 l_emp_tab.trim (5);

    10 dbms_output.put_line (l_emp_tab.count);

    11

    12 end;

    13.

    l_emp_tab. Trim (5);

    *

    ERROR on line 9:

    ORA-06550: line 9, column 2:

    PLS-00306: wrong number or types of arguments in the call to 'TRIM '.

    ORA-06550: line 9, column 2:

    PL/SQL: Statement ignored

    Thanks in advance for your help.

    See you soon,.

    Suri

    For PL/SQL collections "index by" you cannot use the TRIM function. If your collection statement excludes the portion "index of...» ", then you can.

    Gerard

  • Localhost not found when you use the export to Youtube

    I can't use the youtube option in the tab publish in export. Screenshots show the problem.

    10.10.2 Mac

    First 2014.2

    Screen Shot 2015-05-03 at 1.53.15 PM.png

    Screen Shot 2015-05-03 at 1.53.24 PM.png

    Screen Shot 2015-05-03 at 1.57.13 PM.png

    So, since I don't have a lot of help, I decided to study a little further and it turns out that this is a matter of Media Encoder and not first. The YouTube, Vimeo, etc. parameters are defined for the Media Encoder. I open open a threat in this software.

    Publish on YouTube and Vimeo | Tutorials from Adobe Media Encoder

    New thread

    Localhost error when you try to publish using Youtube or Vimeo

  • Error when you use the feature Version «Back upward in a file»

    I run an error when you try to save a file version. The error is below to:

    There was an error trying to get the status of the job.

    1: the server returned an error during the processing of the action: CloseJob. Error message: String reference not set to an instance of a string.

    Parameter name: s

    As you can tell, he didn't give me much to do.

    Some background information:

    -J' trying to backup/export a version that has been upsized QA development

    -QA and development have the same version/patch 11.1.2.3.500

    -This version has been imported into the development, and then copied, and then mixed with a development version.

    -I did not receive any errors during this process

    -I am able to backup other files without getting this error

    Any help will be really appreciated.

    Thank you

    Aaron

    Hi Aaron,

    At first glance, it looks like there may be a string of property that is not a string data type. However, before you dig too deep, try to reload the version to see if that makes a difference. I had a similar problem before and it is solved.

    Thank you

    Jordan

  • Get the error when you use the Oracle 9.2 on RRS 4 installation

    Hi all

    I was getting error while installing oracle 9.2.0.4 in Red hat advanced server 4

    YES was generating a message
     could not able to relink ins_sqlplus.mk  and ins_rdbms.mk
    but I'd ignored, after installation of the oracle s/w, I relinked bleow files

    I also tried running the command below
    [oracle@oracle lib]$ make -f ins_sqlplus.mk install
    
    but when i try to make ins_rdbms.mk i was getting a error
    
    [oracle@oracle lib]$ make -f ins_rdbms.mk install
    .
    .
    .
    .
    .
    ..
    .
    u01/app/oracle/product/9.2.0.1/db_1/lib32/libgeneric9.a   `cat /u01/app/oracle/product/9.2.0.1/db_1/lib32/sysliblist` -Wl,-rpath,/u01/app/oracle/product/9.2.0.1/db_1/lib:/lib:/usr/lib -lm    `cat /u01/app/oracle/product/9.2.0.1/db_1/lib32/sysliblist` -ldl -lm    -lvsn9
    /usr/bin/ld: crt1.o: No such file: No such file or directory
    collect2: ld returned 1 exit status
    make[1]: *** [/u01/app/oracle/product/9.2.0.1/db_1/rdbms/lib/extproc32] Error 1
    make[1]: Leaving directory `/u01/app/oracle/product/9.2.0.1/db_1/rdbms/lib'
    Please suggest me if this will have an impact on the DB

    Published by: user00726 on July 8, 2009 23:06

    If the error only occurs when you start the dbca Wizard, the database itself should be ok. Before using it for the production you can stress test your db using swingbench or hammerora to be sure that iti works well.

    Concerning

    Oliver

  • Permission denied error when you use the Matlab script

    I have the following simple running a Matlab script in Labview.

    K = 5;
    Matrix = randn (4,4);
    matlab.io.saveVariablesToScript ('Parameters.m', {'K', 'Matrix'})

    the last command saves the variables 'K' and 'Matrix' in the m-settings file that I can then use to load the settings 'K' and 'Matrix' to a 'Control Design and Simulation Model'.

    When I run the now from Matlab everything works fine. When I run this LabVIEW so I get the following error:

    LabVIEW: An error has occurred during execution of the script. Error message from the server?: Error using matlab.io.saveVariablesToScript
    Parameters.m: Could not open the file: permission denied.

    I use Matlab 2015 and LAbview 2015 in a 64-bit windows computer 7.

    Any help would be really appreciated.

    For those who have the same permission denied errors, I found the solution.

    I had to specify the current working directory in the matlab script (this is the directory to which you saved your LAbview VI).

    For example, if you have saved your labview vi to C:\Example_Folder

    then you must add the following command in your matlab script node before the command that causes the error

    CD (' c:/Example_Folder')

    I hope this will help.

  • Certificate error when you use the services of advertising with IE7

    whenever I try to use the commercial services administration console I MI following warning using IE7 any idea how to stop this horse? :



    There is a problem with this Web site's secure certificate.


    The security certificate presented by this website was not issued by an approved certification authority.

    Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.
    We recommend that you close this webpage and do not make this Web site.
    Click here to close this webpage.
    Continue to this website (not recommended).
    More information


    If you arrived at this page by clicking a link, check the Internet address in the address bar to be sure this is the address you've been waiting for.
    When you go to a Web site with an address as https://example.com, try to add the "www" in the address, https://www.example.com.
    If you choose to ignore this error and continue, don't get personal information on the Web site.

    Jin
    IE 7 has changed the way in which the certificates have been processed compared to IE 6. In IE 6, the user gets an option to display the certificate before continuing to view this site. In the process, the user can import the certificate into the browser trust store.
    Given that the CPS is deployed with a self-signed certificate, in IE 7, we get a certificate error.

    There is currently no work around for the same thing, except for the deployment of war file cps on an application server that has a certificate signed by an authorized signatory

    Thank you
    Sudharshan

  • Error when you use the Group feature

    Oracle forms6i

    Hai

    While I compile my coding it will compile correctly, but when I tried to run I revealed an error in the function of group

    my code is


    If (NTC <>0) then
    Select the BAR code, RESPONDENT, OUTTIME today_bar, today_in, today_out from dail_att where BARCODE =: bar code
    and ATTEND_DATE =: bardate;
    Update dail_att set outtime = max(:bartime) where barcode =: bar code
    and ATTEND_DATE =: bardate;

    on the other
    If (cnt2 <>0) then

    Select RESPONDENT, OUTTIME in yest_in, yest_out from dail_att where BARCODE =: bar code
    and ATTEND_DATE =: bardate-1;

    If (yest_in is not null and yest_out is null) then
    Update dail_att set outtime = max(:bartime) where barcode =: bar code
    and ATTEND_DATE =: bardate-1;

    on the other
    insert into dail_att(barcode,intime,attend_date)
    values (: Barcode, min(:Bartime),: bardate);
    end if;
    on the other
    If: bartime between 0100 and 0630
    insert into dail_att(barcode,intime,attend_date)
    values (: Barcode, min(:Bartime),: bardate-1);

    Update dail_att set outtime = max(:bartime) where barcode =: bar code
    and ATTEND_DATE =: bardate-1;

    on the other

    insert into dail_att(barcode,intime,attend_date)
    values (: Barcode,: min (Bartime),: bardate);
    end if;
    end if;
    end if;

    while I'm trying this groupfunction it throws error while I use seen tell me how to use the Group feature and where
    to use

    Regadrs

    Srikkanth.M

    Srikkanth,

    For this you need to calculate the max outside of the update statement and then use this value in the update statement.

    The bartime is a control in the block?

    If Yes, then you need to find the max manually, and if it isn't, then you can write a sub query to find the maximum value.

    Kind regards

    Manu.

    If my response or response from another person was helpful, please mark accordingly

  • Compilation error when you use the NDK library

    Hello

    I am developing an application of cascades that uses a static library NDK to communicate with a bluetooth device. The NDK library compiles without problems, but when I then compile the application stunts I get errors with all bluetooth NDK functions:

    myBB10Lib.a(BluetoothDevice.o): In function `MyBB10Lib::BluetoothDevice::getAddress()':
    \src\Driver/BluetoothDevice.cpp:33: undefined reference to `bt_rdev_get_address'
    
    myBB10Lib.a(BluetoothDevice.o): In function `MyBB10Lib::BluetoothDevice::getName()':
    \src\Driver/BluetoothDevice.cpp:53: undefined reference to `bt_rdev_get_friendly_name'
    
    make[2]: *** [o.le-v7-g/MyCascadesProject] Error 1
    make[1]: *** [debug] Error 2
    make: *** [Device-Debug] Error 2
    

    (I create a static library as it will act as a driver for the bluetooth device in other applications of stunts in the future).

    I have good include (#include ) in the BluetoothDevice .cpp file, but the application of Cascades always gives me this error. It is one of the functions in question:

    /*!
     * Returns the MAC address of the remote device, terminated by a null character (\0).
     */
    char* BluetoothDevice::getAddress() {
    
        // Holder for results
        char address[18];
    
        // Perform the check
        int res = bt_rdev_get_address(mDevice, address);
        if(res != 0) {
    
            //TODO  Query failed, pass up error
        }
    
        return address;
    }
    

    Any suggestions?

    Hello!
    I suspect that the NDK functions can be linked only dynamically. Only the .so files are available.

    Try adding
    LIBS +=-lbtapi
    the file .pro of application using the library.

  • 404 error when you use the button «see more»

    Since the beginning of Adobe Stock in August 2015, I never had the "Show more" button work properly when previewing of images. Can I use the options for most of this series, more of this model and similar images, but see button more still records a 404 error screen. At this point, I completely close my browser for Adobe Stock to reset.  Any suggestions?

    Hello

    Please see the links below for help:

    Error message 404 after the first page of every search. It's driving me crazy that I really need pictures!

    Has thrown two licenses-error 404 #92395577 kamimi

    Hope this helps!

  • Error when you use the trunc function

    Hai

    While I use the trunc function in my program there is an error

    ORA-01422 exact fetch returns several non requested lines but he executed successfully

    Concerning

    Srikkanth.M

    Srikkanth,

    Make sure that the SELECT INTO returns only 1 row. If you can not sure of that, so that its better to use a cursor.

    DECLARE
         CURSOR Cur_Att IS SELECT BARCODE, INTIME, OUTTIME FROM DAIL_ATT WHERE BARCODE = :BARCODE AND ATTEND_DATE = TRUNC(:bardate);
    BEGIN
         OPEN Cur_Att;
         FETCH Cur_Att INTO :TODAY_BAR, :TODAY_IN, :TODAY_OUT;
         CLOSE Cur_Att;
    END;
    

    Kind regards

    Manu.

    If my response or response from another person was helpful, please mark accordingly

  • MAXL: Error when you use the runtimesubvar variable in the function 'run the calculation '.

    Hello everyone,

    I am trying to use a variable ($MyScenario) as a runtimesubvar for a calculation script.

    This excerpt from my script works perfectly (without variables):

    run the calculation "MyApp". "MyPlantype'. '" MyCalcscript' with runtimesubvars ' MyRTSV = 'Budget '. ' ;

    The following with variable does not work:

    The value MyScenario = "Budget";

    echo $MyScenario;

    run the calculationn 'MyApp'.' MyPlantype'. 'MyCalcscript' with runtimesubvars ' MyRTSV = $MyScenario; ' ;


    It is the output:

    Budget (<-$MyScenario echo works!)

    MAXL > run the calculation 'MyApp'.' MyPlantype'. 'MyCalcscript' with runtimesubvars 'MyRTSV = $MyScenario;';

    ERROR - 1012150 - environment variable [MyScenario] does not exist...

    I also tried putting $MyScenario between quotation marks simple '$MyScenario', which seems to work better but leading to a different error:

    Budget

    MAXL > run the calculation 'MyApp'.' MyPlantype'. 'MyCalcscript' with runtimesubvars ' MyRTSV = 'Budget';

    ERROR - syntax error 1242021-1 ['Budget'].

    What Miss me?

    Thanks in advance,

    Fadel

    Have you tried to use double quotes around the entire string of RTSV? Apostrophes are cutting the expansion of variables in MaxL. I think the idea is at the exit of the second snippet - $MyScenario is passed through the intact calculation and then script (MIS-) interpreted as an environment variable.

  • I get this error when you use the app in windows 10. Error 16

    Hello

    Sorry for the late reply!

    Please close Acrobat and then open Acrobat as run as administrator.

    Or you can also check: https://helpx.adobe.com/creative-cloud/kb/configuration-error-cs5.html

    Let us know if you still have problems!

  • Error when you use the Application Loader

    When I try to download my application in with the application loader, I get this message:

    In iTunes Connect, newsstand is enabled for your version of the app. The Info.plist file must include UINewsstandApp = true and CFBundleIcons.UINewsstandIcon dictionary must be specified.

    I submit multi-folio.

    Please help guys!

    In App Builder you must select one of the types of viewer that includes "iTunes subscription. Then elaborate on the newsstand and subscription details pages.

    Neil

Maybe you are looking for

  • photos/video extract iOS for mac messages

    Hello I'm looking for a way native extract/transfer and save all iOS app photos/video of my iMac message without having to flip through each thread message to select pictures and videos. There are many threads to pass by...  I've used the Preview.app

  • Clicking noise in officejet 6700

    Hello. I created my Officejet 6700 yesterday without any problem. When I turned it on today, it continues to make a strange rattling noise (sound depth rather than a piercing). It does this until it turns itself off. However, it prints well - while w

  • Rename a custom device

    Hi all I made a custom device that perform some operations with the associated DAQ card. In the Solution Explorer system Veristand, to manage several boards, it is possible to add multiple instances of it. The name of each instance must match the ass

  • Read from worksheet only read 1st column

    Hi all I use "Worksheet reading" to read a line from a file at a time (I'll use the data to each line for some calculations on a basis per line).  However, the program is only showing me the value of the cell in the first column of each row.  I tried

  • Until the blackBerry Smartphones

    On my old phone I would get text message/call 'beeps' when I missed a message/call equally min until I've watched the message/missed call log.    Any way to get there.