Error when you use the feature Version «Back upward in a file»
I run an error when you try to save a file version. The error is below to:
There was an error trying to get the status of the job.
1: the server returned an error during the processing of the action: CloseJob. Error message: String reference not set to an instance of a string.
Parameter name: s
As you can tell, he didn't give me much to do.
Some background information:
-J' trying to backup/export a version that has been upsized QA development
-QA and development have the same version/patch 11.1.2.3.500
-This version has been imported into the development, and then copied, and then mixed with a development version.
-I did not receive any errors during this process
-I am able to backup other files without getting this error
Any help will be really appreciated.
Thank you
Aaron
Hi Aaron,
At first glance, it looks like there may be a string of property that is not a string data type. However, before you dig too deep, try to reload the version to see if that makes a difference. I had a similar problem before and it is solved.
Thank you
Jordan
Tags: Business Intelligence
Similar Questions
-
TestStand crashes when you use the feature of LENGTH
So I have a problem when you use the TERM built on stage.
the first time I run my sequence everything goes normally...
the second time I try to run the sequence it freezes teststand.
I have notices that when I run my sequence. I can see on TRACK OR the following:
niSE_opensession
niSE_connect (routex)
nise_disconnect.
but after that the sequence is complete. It is not close to the niSE sesion. that this has something to do with the gel TestStand?
If this isn't the case, have you had this question before?
I contacted pickering... they got me new drivers
Response of Pickering:
It sounds like the problem which came first when NEITHER Visa has been changed, version 5.2 or higher, I think. In any case, I'll try first to install the latest version of the Pickering IVI driver.
http://downloads.pickeringtest.info/downloads/drivers/IVI/pi40iv_4.10.1.exe
I installed them and it works now...
-
When you use the period of Parental control feature, acct of my child receives the 15 min and 1 put min warning, and then the closure of the session. However, any Web site that it has a really annoying music keeps playing even when I connected under my account admin the only way I can disconnect the acct with Parental control game is to restart my whole machine. Is there another way to disconnect the user standard acct with this feature of limitation in time game? THX.
Hi marion_librarian
Thank you for using the Microsoft Answers Forums!
This is the problem of design, the session remains active in the background, however, so the next time they connect, they can pick up where they left off without losing any of their work.
In case if you complete the program, there is no these settings in the parental control to close the program, you can disconnect the program using the Task Manager.
Check the link for more information:
Explore the features: Parental controls:
http://www.Microsoft.com/Windows/Windows-Vista/features/parental-controls.aspx
Set up Parental controls:
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls
NOTE: When you log in as an administrator you can connect to the wide of other users. Follow these steps to log on to the account with Parental control and/or any other user.
1 click-right on the taskbar and open the Task Manager.
2. Select users
3. right click on the user name you want to disconnect, and then click close session.
Hope this information was useful.
Let me know if it worked.
All the best!
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
get the error when you use the TRIM method in the collections
Hi Experts,
When you use the TRIM method I get below error. I make any mistake here?
DB: Oracle 11g
SQL > declare
2
emp_tab of type 3 is the employee table % rowtype index directory.
4 l_emp_tab emp_tab;
56 start
7
8 select * bulk collect into l_emp_tab of employees;
9 l_emp_tab.trim (5);
10 dbms_output.put_line (l_emp_tab.count);
11
12 end;
13.
l_emp_tab. Trim (5);
*
ERROR on line 9:
ORA-06550: line 9, column 2:
PLS-00306: wrong number or types of arguments in the call to 'TRIM '.
ORA-06550: line 9, column 2:
PL/SQL: Statement ignored
Thanks in advance for your help.
See you soon,.
Suri
For PL/SQL collections "index by" you cannot use the TRIM function. If your collection statement excludes the portion "index of...» ", then you can.
Gerard
-
Certificate error when you download the trial version of the EP 12
I get this error when you try to download the trial version.
Use another browser.
-
Get the error when you use the Oracle 9.2 on RRS 4 installation
Hi all
I was getting error while installing oracle 9.2.0.4 in Red hat advanced server 4
YES was generating a messagecould not able to relink ins_sqlplus.mk and ins_rdbms.mk
but I'd ignored, after installation of the oracle s/w, I relinked bleow files
I also tried running the command below
Please suggest me if this will have an impact on the DB[oracle@oracle lib]$ make -f ins_sqlplus.mk install but when i try to make ins_rdbms.mk i was getting a error [oracle@oracle lib]$ make -f ins_rdbms.mk install . . . . . .. . u01/app/oracle/product/9.2.0.1/db_1/lib32/libgeneric9.a `cat /u01/app/oracle/product/9.2.0.1/db_1/lib32/sysliblist` -Wl,-rpath,/u01/app/oracle/product/9.2.0.1/db_1/lib:/lib:/usr/lib -lm `cat /u01/app/oracle/product/9.2.0.1/db_1/lib32/sysliblist` -ldl -lm -lvsn9 /usr/bin/ld: crt1.o: No such file: No such file or directory collect2: ld returned 1 exit status make[1]: *** [/u01/app/oracle/product/9.2.0.1/db_1/rdbms/lib/extproc32] Error 1 make[1]: Leaving directory `/u01/app/oracle/product/9.2.0.1/db_1/rdbms/lib'
Published by: user00726 on July 8, 2009 23:06If the error only occurs when you start the dbca Wizard, the database itself should be ok. Before using it for the production you can stress test your db using swingbench or hammerora to be sure that iti works well.
Concerning
Oliver
-
How can we change the text and fonts when you use the feature "painting".
I use the "feature of the paint to the text of the announcement for the pictures, but I can't understand how to change the size of the text or characters.» The 'help' in the painting says that you can do both, but they don't say HOW! Help?
Hi PTWG,.
If your using Vista or XP while in the painting after that you drag the text window will come the possibility to change the font and size. If you do not see this option click on view and be sure there is a check box in the text toolbar.
-
error when you use the Export-CSV cmdlet
Hello
I get the following error when you try to pipe the output to a csv file
" Could not bind the parameter argument 'InputObject' because she's nowhere.'"
The output is placed in the csv file, but I get this error at the end of the script.
Here is the code:
##Variables
###################################
$report = @)
$CSVfile = "d:\Vm_Report.csv".
$VMs = get-vmhost | Get - VM
###################################
{foreach ($VM to $VMs)
$VMx = get-view $VM.ID
$HW = $VMx.guest.net
foreach ($dev to $HW)
{
foreach ($ip in $dev.ipaddress)
{
$report += $dev. Select @{Name = 'Name'; Expression = {$vm.name}},@{Name = 'IP address'; Expression = {$ip}}, @{Name = 'MAC'; {Expression = {$dev.macaddress}}.
@{Name = 'Property DL'; Expression = {$vm. CustomFields}}
}
}
}
$report | Export-CSV - NoTypeInformation $CSVfile
Thank you
The attached script implements the test of the $HW variable.
In my test environment, Export-Csv now works without any problem.
Give it a try.
-
Error when you use the Group feature
Oracle forms6i
Hai
While I compile my coding it will compile correctly, but when I tried to run I revealed an error in the function of group
my code is
If (NTC <>0) then
Select the BAR code, RESPONDENT, OUTTIME today_bar, today_in, today_out from dail_att where BARCODE =: bar code
and ATTEND_DATE =: bardate;
Update dail_att set outtime = max(:bartime) where barcode =: bar code
and ATTEND_DATE =: bardate;
on the other
If (cnt2 <>0) then
Select RESPONDENT, OUTTIME in yest_in, yest_out from dail_att where BARCODE =: bar code
and ATTEND_DATE =: bardate-1;
If (yest_in is not null and yest_out is null) then
Update dail_att set outtime = max(:bartime) where barcode =: bar code
and ATTEND_DATE =: bardate-1;
on the other
insert into dail_att(barcode,intime,attend_date)
values (: Barcode, min(:Bartime),: bardate);
end if;
on the other
If: bartime between 0100 and 0630
insert into dail_att(barcode,intime,attend_date)
values (: Barcode, min(:Bartime),: bardate-1);
Update dail_att set outtime = max(:bartime) where barcode =: bar code
and ATTEND_DATE =: bardate-1;
on the other
insert into dail_att(barcode,intime,attend_date)
values (: Barcode,: min (Bartime),: bardate);
end if;
end if;
end if;
while I'm trying this groupfunction it throws error while I use seen tell me how to use the Group feature and where
to use
Regadrs
Srikkanth.MSrikkanth,
For this you need to calculate the max outside of the update statement and then use this value in the update statement.
The bartime is a control in the block?
If Yes, then you need to find the max manually, and if it isn't, then you can write a sub query to find the maximum value.
Kind regards
Manu.
If my response or response from another person was helpful, please mark accordingly
-
Permission denied error when you use the Matlab script
I have the following simple running a Matlab script in Labview.
K = 5;
Matrix = randn (4,4);
matlab.io.saveVariablesToScript ('Parameters.m', {'K', 'Matrix'})the last command saves the variables 'K' and 'Matrix' in the m-settings file that I can then use to load the settings 'K' and 'Matrix' to a 'Control Design and Simulation Model'.
When I run the now from Matlab everything works fine. When I run this LabVIEW so I get the following error:
LabVIEW: An error has occurred during execution of the script. Error message from the server?: Error using matlab.io.saveVariablesToScript
Parameters.m: Could not open the file: permission denied.I use Matlab 2015 and LAbview 2015 in a 64-bit windows computer 7.
Any help would be really appreciated.
For those who have the same permission denied errors, I found the solution.
I had to specify the current working directory in the matlab script (this is the directory to which you saved your LAbview VI).
For example, if you have saved your labview vi to C:\Example_Folder
then you must add the following command in your matlab script node before the command that causes the error
CD (' c:/Example_Folder')
I hope this will help.
-
Certificate error when you use the services of advertising with IE7
whenever I try to use the commercial services administration console I MI following warning using IE7 any idea how to stop this horse? :
There is a problem with this Web site's secure certificate.
The security certificate presented by this website was not issued by an approved certification authority.
Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.
We recommend that you close this webpage and do not make this Web site.
Click here to close this webpage.
Continue to this website (not recommended).
More information
If you arrived at this page by clicking a link, check the Internet address in the address bar to be sure this is the address you've been waiting for.
When you go to a Web site with an address as https://example.com, try to add the "www" in the address, https://www.example.com.
If you choose to ignore this error and continue, don't get personal information on the Web site.Jin
IE 7 has changed the way in which the certificates have been processed compared to IE 6. In IE 6, the user gets an option to display the certificate before continuing to view this site. In the process, the user can import the certificate into the browser trust store.
Given that the CPS is deployed with a self-signed certificate, in IE 7, we get a certificate error.There is currently no work around for the same thing, except for the deployment of war file cps on an application server that has a certificate signed by an authorized signatory
Thank you
Sudharshan -
Satellite A350 - error when you install the latest version of the Bios (64 bit OS)
I don't know what the problem is: I am trying to install the latest version of the bios, bios-20090803144625 (64-bit) on a 350 Statellite running Windows 7 RC. I get the following error of "Phoenig WinPhlash64": "do not have the system Bios information BCPSYS block signature not found.» "Error code:-100"
I also tried the 32 bit installer without a bit of luck.I tried to install in safe mode, but the installer won't work in "normal" mode.
Any suggestions?
G
I think that you need to install the package of value added so that the file BIOS can detect the hardware correctly.
-
Compilation error when you use the NDK library
Hello
I am developing an application of cascades that uses a static library NDK to communicate with a bluetooth device. The NDK library compiles without problems, but when I then compile the application stunts I get errors with all bluetooth NDK functions:
myBB10Lib.a(BluetoothDevice.o): In function `MyBB10Lib::BluetoothDevice::getAddress()': \src\Driver/BluetoothDevice.cpp:33: undefined reference to `bt_rdev_get_address' myBB10Lib.a(BluetoothDevice.o): In function `MyBB10Lib::BluetoothDevice::getName()': \src\Driver/BluetoothDevice.cpp:53: undefined reference to `bt_rdev_get_friendly_name' make[2]: *** [o.le-v7-g/MyCascadesProject] Error 1 make[1]: *** [debug] Error 2 make: *** [Device-Debug] Error 2
(I create a static library as it will act as a driver for the bluetooth device in other applications of stunts in the future).
I have good include (#include
) in the BluetoothDevice .cpp file, but the application of Cascades always gives me this error. It is one of the functions in question: /*! * Returns the MAC address of the remote device, terminated by a null character (\0). */ char* BluetoothDevice::getAddress() { // Holder for results char address[18]; // Perform the check int res = bt_rdev_get_address(mDevice, address); if(res != 0) { //TODO Query failed, pass up error } return address; }
Any suggestions?
Hello!
I suspect that the NDK functions can be linked only dynamically. Only the .so files are available.Try adding
LIBS +=-lbtapi
the file .pro of application using the library. -
404 error when you use the button «see more»
Since the beginning of Adobe Stock in August 2015, I never had the "Show more" button work properly when previewing of images. Can I use the options for most of this series, more of this model and similar images, but see button more still records a 404 error screen. At this point, I completely close my browser for Adobe Stock to reset. Any suggestions?
Hello
Please see the links below for help:
Has thrown two licenses-error 404 #92395577 kamimi
Hope this helps!
-
I've never had this happen before? I ve used Muse for a long time now and it has always worked well.
Download Muse ONLY php and css files when I use export to the FTP host. No html? It has never happened before.
If I export to HTML and use my regular FTP program to transfer to the correct host folder it works fine.
In fact, if I try to update the site of work of Muse, to load on the FTP host, Muse removes html files in the folder and the site no longer works...
Anyone?
Please try to check if the exported file includes all of the files, try to export again in a new folder, and then check.
Thank you
Sanjit
Maybe you are looking for
-
Sidebar missing since the update to El Capitan ejection
I understand this sounds like a minor problem, but it's actually quite boring. I've recently updated to El Capitan and since then the small button that appears on the right side of a hard drive external when you hove top of ejection is missing. I use
-
I can't open my Iphoto of time machine
I can't open my iphone to time machine. So, I don't know if the pictures have been saved or not. Thank you
-
I just started to Multisim/Ultiboard, and I'm having problems creating a footprint for a connector SMA edge similar to this: http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=J502-ND I can easily create 3 pads on the top layer, but I a
-
Is it safe to keep a photocopy of his passport on Skydrive?
I heard that if you lose your Passport on holiday for example, if you have a copy somewhere, it is acceptable for the time.
-
HDR modus wil trial photos but not appear in the library (or more)
No idea who anyone?I did not change any setting that I could see. Day before yesterday, it works fine.I think I had an update. Someone else in trouble because of their update?