Error Windows 8 not installed - upgraded Satellite C855 PSKCCE question

Similar Questions

• Hewlett Packard: 10 Windows will not install upgrades for my printer HP ENVY 5660

  10 Windows will download, but will not install updates from HP on my HP ENVY5660 printer. It just keeps saying my impossible to install right now! However, I get the opinion of HP update every few days! Please, any help would be greatly appreciated. Thank you...

  @tbrays

  If I understand the question, you run Windows 10 and your printer is not yet working on the new operating system.

  Your Support Web site drivers Page printer:

  Printer e-all-in-one HP ENVY 5660

  The good news: most recently manufactured printers HP will work with Windows 10.

  You may need to delete any software printer for programs and features > reboot / restart > download and install a new copy of the Full Feature software > install the package manually > reboot / restart

  Instructions, help, comments and examples:

  Install the full features software - printer

  • The Windows 10 printer Frenzy section

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• When you try to upgrade Windows Vista to Windows 7 I get this error: "Windows could not retrieve information about the disks on this computer."

  original title: problems of Windows update/upgrade

  I'm currently trying to install Windows 7 on my desktop running Vista.

  Whenever I run the Setup it comes up with the following error: Windows could not retrieve information about the disks on this computer.
  I already put the virtual disk on auto and rebooted several times. I get the same error.
  Also, I tried to update my computer by using the windows update thinking that would help... Windows update decides to not work either! It comes up with the error: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.
  gain, I restarted and it still does not work.
  I am currently running Windows Vista 32 bit on my desk (I thank God for my laptop!).

  Help!

  First, run Windows 7 upgrade advisor:

  Windows 7 Upgrade Advisor
  http://Windows.Microsoft.com/UpgradeAdvisor

  Note the results and make sure to follow the steps.

  Try to install Windows 7 using the USB

  Install Windows 7 with a USB memory key
  http://www.winsupersite.com/article/Windows-7/install-Windows-7-with-a-USB-memory-key

• Windows do not install display error c1900101-30018

  Original title: windows 10

  Why windows do not install display error c1900101-30018

  The phase "Installation drivers and features" is the most delicate part of the upgrade. If you see a c1900101 x300xx failure, it means that we have failed in this phase. The most common failure is x 30018, which usually means a driver crashed when we there for the first time. Any driver can cause failure, but he can't block 100% of the time. If you try again, it may work only.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Get the error message - Installation Failure Windows Installer not installed correctly when trying to install iTunes

  Original title: Error Message: microsoft windows install not installed correctly

  I'm running on Windows Vista 64-bit.  When you try to download iTunes for my iPad2 (now!) I get an error message when you have almost finished, saying "failure of the Installation Windows Installer not installed correctly.  I've looked everywhere for help.  Tried the auto-fixit... nothing.  Cannot find on my computer to try to do a uninstall, re - install Windows Installer.  (not quite tech-y to see if this is possible or if it would even help.  Please Please someone share their expertise?  Thank you very much, C.

  Hello

  For telephone assistance from Dell, you can consult the site mentioned below:

  http://www.dell.com/support/incidents/us/en/19/Phone/PhoneTagEntry?c=us&s=dhs&cs=19&l=en.

  For more support options affect the site mentioned below: http://support.dell.com/support/topics/global.aspx/support/dellcare/contact_technical_support?c=us&l=en&s=dhs& ~ ck = nohold'a.

• Trying to download music from itunes on a Windows Movie Maker 6.0 file and receive an error msg stating not installed codec. Windows Vista operating system.

  Trying to download music from itunes on a Windows Movie Maker 6.0 file and receive an error msg stating not installed codec.  Windows Vista operating system.

  Trying to download music from itunes on a Windows Movie Maker 6.0 file and receive an error msg stating not installed codec.  Windows Vista operating system.

  ==============================
  The following thread explains how to convert
  the files to a different format... iTunes then
  You should be able to import them.

  Need help to convert itunes to Windows Media
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f496ae8e-d3f9-4336-BB3C-8070421c8eff
  (Scroll to the bottom to detach the message by: musiclover101)

  Or... use the following freeware to convert your
  already downloaded files to the .wma format.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your files in iTunes on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, it goes well until the installation of the updates, but installation ends, it displays error windows could not update

  I have windows 7 ultimate works correctly. I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, he is well until the installation of the updates but the installation finished, it displays error windows could not update the configuration to start the computer.  not installing and it rolls supports everything. Please help me solve this problem

  original title: windows 7 gamer edition

  Download of software on these sites can be very risky, because the origin of the files are usually edited and its quite possible that they could have injected malicious code in it.

  Windows 7 Gamer edition is not a developed Microsoft or affiliated with the product, what appears to be a customized image of Windows 7 that authors customized to remove or add Windows components, which can also be very problematic.

  You use something that no one can help you consider he has probably been reverse engineered and probably injected by a malicious code like spyware (keyloggers, rootkits, worms, viruses). I suggest you stick to Windows 7 Ultimate, this is the most complete edition of Windows 7, anyone can have.

  Resources:
  The Dangers of the purchase or use of software pirates - Notebooks.com

• Windows is not installing KB978338

  Windows log on to the site to update then it performs a restore point then when it goes down load this update fails, how can I solve this problem

  Based on the reasons, you gave no information such as errors etc.

  May read these threads to see if all relate to you, if not, post back with more information.

  Related topics

  Windows Update not install (KB978338)
  Problems after installing KB978338 on Windows Vista SP2
  update still shows KB978338 and failed ten times, I need to know why
  Update of security Windows Vista Edition Family Premium KB978338__
  Security update KB978338 system leads to respond very slowly and disconnect network connections

• Creative suite 4 master collection of error installation will not install Premiere Pro, still, indesige, flash, ps4, sequelae.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running. 

  Creative suite 4 master collection of error installation will not install Premiere Pro, indesign, flash, Photoshop and AfterEffects.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running.  Running windows 7 64 bit.  Had no problem with installation on my last computer 64-bit windows 7

  It seems that everything is installed now.  Don't know how, but I think that I opened it as administrator.

  Thank you

  Corey

• can not update software adobe reader IX error windows do not have sufficient rights to modify the file

  can not update software adobe reader IX error windows do not have sufficient rights to modify the file

  Hi janl35265451,

  Make sure that you are connected with the Admin account to install the updates.

  Open the drive, go to the Help menu & "Check for the Updates.

  Kind regards
  Nicos

• customization error "Sysprep is not installed on the server of virtual center for the model you have selected.

  Hi all

  Need your help with customization of the script here is the steps I've done so far

  1.I have created a virtual machine with Windows XP Professional as the operating system installed VMware Tools / VMware view agent then I added the virtual machine to the domain and created a template called (winXPtemp)

  2. According to article http://www.VMware.com/support/VC/doc/c12prepcustomize.html#1030366 I downloaded the Q257813_w2k_spl_x86_en.exe and the same extract. I force my VC server find the path as mentioned in article

  C:\ [VirtualCenter_installation_directory]\resources\windows\sysprep\1.1 so copied the files extracted to the location C:\Program Files\VMware\Infrastructure\VirtualCenter Server\resources\windows

  3 then I copied and extracted the file \support\tools\deploy.cab on the windows 2003 CD and copied the sysprep files extracted to the following location on the VC Server

  C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\xp

  4. After you have done that, I've created a script under customization script called "testsript".

  5 Note until now I have not created a pool of resources as requires it the deployment of only 4 VM on an ESX Server with script customization. The data store for the virtual machine is a 100 GB LUN from a 2050 of FAS of NetApp iSCSI

  6. now when I create an automatic pool when I select the script that I created in step 4, and then click then it gives me an error "Sysprep is not installed on the server of virtual center for the model you have selected. Sysprep on the server installation.

  Troubleshooting done by me:

  I have readded the VC Server Manager to view but it force worked

  Thanks in advance for your help

  Kind regards

  v

  If I remember correctly the location for XP should go to: C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\xp

  For XP SP2 Sysprep files can be downloaded from the Microsoft site and are called

  Windows XP SP2 deployment tools

  The article you linked was VirtualCenter 1.x. Since you have given a version number of VirtualCenter I assumed it was 2.x or later.

  ----

• Compressor 4, 4K of MXF ProRes 4 k files, the error message, codec not installed

  Hello
  When you try to convert MXF 4 K in ProRes files I get an error message "codec not installed." I just bought 4 compressor andean can't seem to find a solution because it seems that I have updated with the latest version. Does anyone have a solution to this?

  Strange thing is FCPX can load and process the MXF files...

  In Information systems > facilities see if video Formats 2.0.4 is installed. If not, you can download here.

  Russ

• Windows could not install your (CEWL 1) not found driver software for your device

  After you download sony_tvupdate_2012_1158_ucf_auth

  A new folder will be created called sony_dtv026000066006_00000301

  Inserted UWA - BR100 and received the following:

  Windows needs to install driver software for your (CEWL 1)

  Locate and install driver software (recommended)

  C:\Windows\system32\new dev.exe

  Windows could not install your (CEWL 1)

  Check the support section for driver software

  Insertion of USB causes the following message: not found driver software for your device

  Hello
   
   
  I would suggest trying the following methods and check.
   
   
  Method 1:
  Tips for solving common driver problems.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems    
   
   
  Method 2:
  Download the driver on the device manufacturer's website and install on your computer by keeping the computer in a clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

   
   
  You can also refer to:
  Update a hardware driver that is not working properly. http://Windows.Microsoft.com/en-US/Windows-Vista/Update-a-Driver-for-Hardware-that-isn ' t-work properly

• Make a right click on the folder responds slowly and sometimes get an error "windows does not.

  original title: pc maintenance

  Make a right click on the folder responds slowly and sometimes get an error "windows does not.

  Make a right click on the folder responds slowly and sometimes get an error "windows does not.

  This could be due to so many things. Malware, applications in resources, solutions anti-virus, hard drives damaged, damaged file system, processor ram capacity limitation...

  can't tell what your problem exactly, you can use the reliability monitor, event viewer to discover additional problems...

  What does it mean when a program is not responding? http://Windows.Microsoft.com/en-us/Windows-Vista/what-does-it-mean-when-a-program-is-not-responding

• Windows update error 800706BA do not install updates!

  I have recently upgraded to windows 7 Home Edition of Vista. For the last week, I tried to install the updates through the Windows Update program, and everytime I try, it starts to install, but also its about to end it stops and comes with the window "some updates were not installed" don't install all new updates to day and it gives the error code 800706BA which is an "unknown" error I tried to install the updates from the Download Center, and they do not as well. It's infuriating and I have no idea what to do to get the updates to install. Any help would be greatly appreciated.
  Kind regards
  James

  I think your best bet would be to safeguard any staff data (which none should be considered 100% reliable at this stage) can do a format and clean install of Windows 7, James.

  After installed cleaning, need you the equivalent of a "new computer" in order to take care of everything on the next page before connecting otherwise the machine to the internet or a network and before using a key USB that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  TIP: Scan your backed up data with your new & completely updated antivirus up-to-date application before putting it on your HARD drive!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft