Error "Windows cannot check for updates because the service is not running.

I am using windows vista 64-bit ServicePack two on my laptop. I recently had to install new hard disks. Since then, Windows update does not work. When I check the updates dialog box appears indicating that Windows cannot check the updates because the service is not running. I used the Microsoft fix - it tool, and it recognizes that there is a problem, but cannot fix. History of the update is completely empty. I would appreciate any ideas on how to solve this problem.

Please read this article:

http://support.Microsoft.com/kb/2730071/en-us

Another suggestion is maybe disable the updates of Windows

Reset.

Activate the Windows updates.

Try again. (Worked for some)

http://Windows.Microsoft.com/en-AU/Windows/turn-automatic-updating-on-off#turn-automatic-updating-on-off=Windows-Vista

Tags: Windows

Similar Questions

  • Error "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "after replacing hard drive

    I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

    The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

    I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

    Operating system is Vista 64 bit.

    Original title: Windows Update

    I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

    The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

    I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

    Operating system is Vista 64 bit.

    After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.

  • Cannot install Windows update, the error message "" Windows update canoe currently check for updates, because the service is not running ".

    Initial version of updated title: windows

    My "Windows update" is not updated. The problem started recently and its shows the error message "Windows update canoe currently check for updates, because the service is not running. You may have to restart your computer "." I tried it with several reboots, but there still is not up to date. Kindly help.

    Hello

    Have you made changes on the computer before this problem?

    Method 1:

     

    Troubleshoot problems with installing updates.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 2:

    Try the procedure described in the following article and check the status of the issue.

    http://support.Microsoft.com/kb/822798

    Restart the computer and check it please for windows update.

    Hope the above information is helpful.

  • After installing Windows 7 using MDT, Windows displays the message "Windows Update cannot currently check for updates because the service is not running.

    Hi all

    I worked on creating a better system for my business get an OS up-to-date with all the required software, settings, and drivers. I have previously using WDS as autonomous and just syspreping images and pushing them up until he became incoherent and corrupting of the parts of the image. I did a little surfing on the web and discovered that many computing professionals use MDT to produce images of quality with all the customization they need. So that's the problem.

    The image works fine. I'm able to customize the way in which I need to and get most of my successful deployed pilots (problem with trackpad drivers), but the error message I get when I try to run a windows update is "windows that update cannot currently check for updates because the service is not running." After I received this message I check my services and it shows the update of Windows running service and long-term as well running services. Tried to restart as suggested and still no results. Undertook research for a possible fix and still nothing.

    Any help?

    It became quite a headache for me. Thank you guys

    Hello

    Thanks for posting your query in Microsoft Community.

    I understand that you have problems with the installation of Windows Update.

    If you your computer are connected to a domain network?

    If Yes, then post your query in TechNet forums because they have more expertise in this issue to help you better. Please follow the below link to do the same.

    T echNet Forums for Windows 7 
    http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

    Hope this information helps.

  • Can't get updates for Windows, "Windows Update cannot currently check for updates, because the service is not running." You may need. "" Restart your computer.

    When I try to install the updates I receive the message "Windows Update cannot currently check for updates, because the service is not running."  You may need. "" Restart your computer,   It does not also. check me the update history

    Hello

    1. you made any hardware or software changes the computer recently?

    2. What is the number of update?

    3. do you get this message for all the updates?

    Follow these methods and check if that helps:

    Method 1:

    Step 1.

    Unplug all external devices, restart the computer, and then try to install updates.

    Step 2:

    I suggest that you follow the steps mentioned and try to start the Windows update service.

    Check if the following services are running.

    (a) Background Intelligent Transfer Service

    (b) cryptographic Service

    (c) Windows Update

    (d) Windows Installer

    a. Click Start, type "services.msc" (without the quotes) and press ENTER.

    b. double-click the service name in the Services list.

    c. under the general tab, next to startup type, make sure that automatic is selected.

    d. If the service is not already running, under Service status, click Start and then click OK.

    e. once the services are started and defined as running, try to install the updates and check.

    Method 2.

    You can follow the steps in this article: http://support.microsoft.com/kb/2509997

    Warning check disk.

    Important: All by performing the check disk on the hard drive if bad sectors are found then check disk try to repair this area, all available data on this sector can be lost.

    Registry warning

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    How to back up and restore the registry in Windows

    See also: the problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  • "The Windows Update cannot currently Check For Updates, because the Service is not running. You may have to restart your computer.

    Unlike before, I can't launch the Windows automatic update service now, I suspect that my computer is infected virus, I just install demo version free of McAfee internet security and run a full scan, no infection has been detected.

    Description:

    When I click on Windows update for all programs at startup, pop out window update, and then I click on "check update", out another part: list "" Windows Update cannot currently Check For Updates, because the Service is not running. "You may need to restart your calculater ', then I restart the computer a few times, the same problem still persists. before I was using microsoft essential secruty with no problems, but now I can't seem to complete the definition of update, so I think this problem could be related to Windows Update and decide to uninstall MSE and replace it with McAfee, but it does not work.

    any help and suggestions would be very appreciated.

    Hello

    Steps 2 to 6 to identify the program that is causing the problem if the clean boot solves the problem.

    Try the procedure described in the following article to improve your computer's performance.

    Optimize Windows 7 for better performance.

    http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

    Ways to improve your computer's performance.

    http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  • Problem updating Windows "impossible to verify updates because the service is not running."

    Am having a problem with Windows Update on my laptop (Vista). Receive a prompt that displays "cannot check the updates because the service is not running. You may have to restart your computer. Yes, I restart. That is what it is?

    I had the same problem on Vista 3 PC based over the weekend and did what follows with quick success after many corrections suggested on this site:

    * go to services and stop the Windows Update Service

    * locate C:\Windows\SoftwareDistribution\folder & remove all it's content (if you have step 1 any content does not correctly as they will be in use by another program)

    * restart the Windows update service

    * ask to check updates

    All mine quickly searched and downloaded all updates applicable, installed and done!

    I hope that it works easily for you too :)

  • Windows Update cannot currently check for updates, because the service is not currently running, try to restart your computer

    My system is:

    Windows Vista Edition Home Premium

    32 bit

    Intel Core 2 Duo T7100 CPU

    2.00 GB RAM

    Help, please!

    Go to; Control Panel, administrative tools, Services, go to Windows Update and double click it.

    Startup type: automatic (delayed start)

    Service status: click Start, apply, OK

  • Windows Update cannot check the updates because the service is not running. You may have to restart your PC and Windows store indicates the that purchase could not be completed

    By updating the windows error stating "Windows update cannot check for updates because the service is not running You may have to restart your PC. "  . and also during the installation of applications to store error display ' purchase could not be completed error code 0 x 80070424 "I tried the convenience store and boot, but none of this has solved my problem please suggest me what to do.

    Hello Bond,

    Thanks for posting your question on the Microsoft community.

    I appreciate your efforts to resolve the issue and your efforts to resolve.

    Windows store may not work because the store cache corruption. Windows Update problem may occur if services are related are arrested because of corruption in the Windows updates.

    I suggest you use the steps in this article and the Coachman.
    Reference:
    Error message 'Windows Update cannot Check For Updates' when you try to install the updates
    https://support.Microsoft.com/en-us/KB/2730071

    Please also reset the cache Windows store and check the issue. Please follow these steps:

    a. press Windows + R keys together to open the run window.

    b. type the following command in run and press ENTER.

    wsreset.exe

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Windows update error: Windows cannot currently check the updates because the service is not running

    Original title: Windows Update No. Longer - Vista business functions

    Last month my Win Vista will not update, little matter how many times I try to do. I always get the error message "Windows cannot currently check for updates because the service is not running." You may have to restart your computer. "Control via msconfig reveals that he is ticked as"running ".

    I run Microsoft Fixit has several times. It is said he has "solved" the problem, but it did not work. Of course there is a corrupted somewhere file that needs to be replaced.

    Please don't say no "update for Win 7" or "Reinstall Windows" because it's not just going to happen.

    Thanks in advance,

    Hello

    1. you remember to make changes to the computer before this problem?

    2. what anti-virus software is installed on your computer?

    Follow these methods.

    Method 1: Anti-virus software may conflict with Windows Update.  You can temporary disable them and check the issue.

    Disable the antivirus software

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

     

    Method 2: How to reset the Windows Update components?
     http://support.Microsoft.com/kb/971058
    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

     

    Method 3:  If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

    Follow these steps:

    a. click the Start button, click computer.

    b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log

    c. delete the log file, and then restart the computer and check the issue.

    Well, it's going to be a long Chronicle, but in the end, the problem has been resolved. Please bear with me:

    Running the program MS Fixit in the past without success, I tried to run the update after you temporarily disable AVG, my program AV. no joy.

    I then ran CC Cleaner to get rid of some of 'dead weight '. I even used its registry cleaning option (which included saves).

    At that point, I did some 'household', & began to defragment my HD with Defraggler. But since it seems to take forever, I went to My Defrag, who finished the job much quicker.

    Although I tried to delete the edb.log file using method 3, I kept getting a message system which was unable to complete this action because the file has been opened in another program.  In the end, I was able to delete the file, but fact directly through Explorer. There also seems to be a sort of small file edb.log, indicating that it was a "recovered" version I deleted that one as well.

    At this point, I ran MS Fixit, who States that the Windows Update components needed to be fixed and proceeded to do so again. Because he had allegedly "fixed" my Updater in the past, I was not holding much hope that this time would be any different. So, after that what he has done, I was pleasantly surprised, I might actually start updating!

    However, the update message that a new version would be dl before I could go any further. So I did it.

    When the new version is started, it ran for about 10 minutes, coming with about 50 updates. According to flush out those who were of no use to me, finally I had dl and installed all relevant updates. And now, the update seems to work fine.

    Once again, my apologies for the long answer. But I wanted to tell the whole story, as I did not quite plan of RajithR.

    Thank you!

  • Error - Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer

    Original title - Vista sp2 64-bit windows program update is not running

    When I open the program "Windows Update", it has an "X" in a red shield symbol.  When I click on the tab "Check for updates", I instantly get a message that says: "the Windows Update cannot currently check for updates, because the service is not running."  You may have to restart your computer.  When I click on the button 'Start' and the window appears with the options of closing down, change user, registration, etc., the first button shows an orange exclaimation mark and when selected the computer seems to make an attempt to download whatever it tries to download.  However, it never downloads anything, and the rest of the exclaimation mark orange.  How can I solve these two issues?  I'm guessing that repair will set the other.

    Hi doubleott


    Method 1:

    You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to p Ed a SFC Scan -.

    a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
    b. type the following command and press ENTER:
    sfc/scannow
    A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
    c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
    d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
    e. once the scan is finished, close the command prompt window, restart the computer and check.

    Check the link below for further guidance on scan SFC - mentioned
    http://support.Microsoft.com/kb/929833

    Method 2:

    You can try to reset the Windows Update components and check if that helps. Follow the link given below to do the same.
    http://support.Microsoft.com/kb/971058

    I hope this helps.

  • Windows Update cannot currently check the updates, because the service is not running. But it is!

    When you try to run windows update on my win7 box family premium, I get the following message: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. »

    Steps has been involved:

    1. I restarted and even restored to the point when the last update was installed.

    2. I verified that the service is running and checked that there are no errors in the the event log for this issue.

    Any ideas?

    PA bear,

    I solved the problem, apparently, some of the dll files becomes involved in the process of updating Windows and just need to be reassocie but for the analysis patterns below are the answers to your questions:

    1 Win 7 Home Premium installation

    2 64 - bit OS

    3 avast! Full version

    4. no other anti-virus/anti-spyware has never been installed

    5. computer was custom built by me, destructive disk used on a new HDD before installing it so that it wasn't a possibility of always being on the disc software.

    6. I left on deployment (I'm in the army) and when I came back my wife told me that the PC was not able to download the updates since November of last year, so she switched off and left to me when I got home.

    Thanks for the quick reply, I was just in the difficulty that I used while watching a few messages on another Web site.

  • Cannot install message of updates that Windows Update cannot currently check the updates because the service is not running

    Original title: update Windows impossible currently to check updates because the service doesn't work (Vista 64)

    I get the message: ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "I rebooted without change.

    I have Vista 64-bit with installed MSE and it cannot update its virus database.  I have also Windows Media Center put up a TV and may not be able to download an updated Guide.

    Can someone help me please?  I just finished a full scan of Malwarebytes and a full scan of MSE - both in Mode safe mode with networking.

    I found a few other forums similar to my problem, but I don't know that they are the same as mine.  I'm a little wary about some of the suggested corrections, so I thought I would like to get suggestions directly related to my problem.

    Thank you!

    Hello

    1. what exactly happens when you try to download the update for Windows Media Center guide? Do you get any error messages?

    2 did you do changes on the computer before the show?

    Method 1: Run the update utility

    See the following site:

    Problems with installing updates

    http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-problems-with-installing-updates.

    Method 2: Start services

    Make sure that the following services are started:

    a. Windows Update

    b. Background Intelligent Transfer Service

    c. Cryptographic Services

    To do:

    a. click Start, type services.mscwithout the quotes and press enter.
    b. double-click the service and under Service status click Start, if it is not started.

    Method 3: Reset the update components

    See the following site:

    How to reset the Windows Update components?

    http://support.microsoft.com/kb/971058.

    Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry .

    Method 4: Run the fixit

    See the following site:

    The problem with Microsoft Windows Update is not working

    http://support.microsoft.com/mats/windows_update/.

  • Windows Update cannot currently check the updates, because the service is not running

    Whenever I try to update my windows vista with the recent service pack more computer, it tells me "Windows update cannot currently check for updates, because the service is not running." I'm running it from my admin account and I was curious to see if the same thing was happening with my other accounts. When I checked the they were fine and ready to go except the said that i needed approval admin even if I was giving him. I tried to turn admins accounts, but he wouldn't let me edit them, neither could I make a new account in general an admin or a fair standard.

    Vista service pack 1

    Processor: Intel (r) Core (TM) 2 CPU 4300 @1. 80 GHz

    Memory: 2.00 GB

    Norton 360 is my security system but did not install til about 2 weeks after a period of 1.5 years without protection (I was a fool, my computer had never seemed all operate differently) so I feel like this may be a virus any causing this problem cause, no idea on how do I fix? Thank you

    Thank you Matt, what ive down to realize, it's I'll just do a pc reinstall (what does this DVD) I know itll mean the deletion of all but ive already backed up what I need/want to so ill be fine. Dell Web site gave me all the information I need on how to do it.

  • Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

    Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

    I am currently using windows 32 bit vist

    I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!

    Suggestions?

    Hello

    1. have you made changes on the computer before this problem?

    2. which antivirus app do you use?

    I suggest you try these methods and check.

    Method 1:

    Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.

    Disable the antivirus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2:
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058
    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

    Follow these steps:

    a. click the Start button, click computer.

    b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
    Where 'C' is the drive of operating system
    c. delete the log file, and then restart the computer and check the issue.

Maybe you are looking for