Error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

Original title: Audio recording sound recording microphone

Hey, if I get this message:

Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

{Unable to load device driver}
HS device driver could not be loaded.
Error status is 0 x %x

When I check the status of my driver, I "updated", but he said I had the latest update installed, and when I clicked on the option for the computer solve the problem itself, after he discovered what was wrong, said, that it has not been yet fixed... I have a HP ENVY m6. Any ideas on what to do? Oh and I did a 'tune up' just a little bit before, but just the usual things nothing big or diff

There are several models of m6 ENVY

ENVY m6 -?

This is a link to the audio driver for HP ENVY m6 - 1188ca (it can work also on other HP computers or not)
This is a link to the HP support site to download drivers

And this is something common for "tuneup", "speed up my computer", "registry cleaner" software to cause problems
Looks like something to remove the registry entries for the driver

Tags: Windows

Similar Questions

  • Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    Original title: Add/Remove components error and DVD driver error

    Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

    Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

    I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

    Hello
     
     
    Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
    Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123
     
     
    Method 1.
    Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.
    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/GP/cd_dvd_drive_problems
     
     
    Method 2.
    Also, try the methods listed in the section below and check.
    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • (KEYBOARD ERROR) Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

    (KEYBOARD ERROR)

    Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

    Hello

    I don't know how it happened.

    I tried unistalling the software but have the same problem when connected to e

    Help, please

    Hi Davedirect,

    ·        It's a wired keyboard or a wireless keyboard?

    ·        Who is the manufacturer of keyboard?

    ·        Since when are you facing this problem?

    ·        You did changes to the computer before this problem started?

    ·        Have you tried to restart the computer and check if the keyboard works normally?

    However, you can try to uninstall all the previous and software drivers installed for the keyboard by following the steps below.  More later, restart the computer and install the latest drivers and software and check if that helps you solve the problem.

    Step 1

    Remove the drivers from the computer. To remove the drivers to follow the steps below:

    a. Click Start and enter the type of search box of start of the press and "appwiz.cpl".

    b. in the programs and features window select the keyboard software installed on the computer and uninstall the drivers.

    Step 2

    During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:

    a. Click Start.

    b. access control panel > system > hardware > Device Manager.

    c. open Device Manager and expand the keyboard device.

    d. right-click on the device keyboard and uninstall the device.

    During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.

    Step 3

    Also, you can try to update the drivers for your keyboard from the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Access the link below to learn more about the error code 38:

    http://support.Microsoft.com/kb/310123

    I hope this helps. Let us know the results.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My TSSTcorp DVD +-RW TS - L632D does not work, error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?

    http://support.Microsoft.com/kb/314060

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

  • Connection error: windows cannot load the locally stored profile

    original title: connection error

    Always get following message when trying to connect to my desktop PC

    Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a damaged local profile. If this problem persists, contact your network administrator.

    This looks like a corrupted profile.  Assuming that you can connect with a user with administrator privileges, do one of the following procedures to restore your profile in the shape.  If you are unable to connect, try to connect by using the built-in Administrator account (Ctrl-Alt-Delete struck twice on the login screen, enter the user: administrator, leave blank password unless you have changed at some point)

    "How to restore Windows XP to a previous state"
      <>http://support.Microsoft.com/kb/306084 >
    (works best if you connect with Safe Mode)

    "How to recover damaged Windows XP user profile"
      <>http://support.Microsoft.com/kb/555473 >

    HTH,
    JW

    PS: Alteration of the disc often accompanies this problem.  Don't forget to run a "chkdsk" operation after you recover.

  • Equium L20: Lost CD/DVD drive - driver may be corrupted or missing (Code 39)

    I just lost the driver POINEER DVD - RW DVR-K16S. For some reason, it's a troublesome TI since im doing a computer course, I've been online and can not find the driver at all, I tried also to update via Windows and nothing. "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    This is the message I receive via the Device Manager. Any help or pointers as to get this driver greatly desired. I can load the driver myself i just have to find it. The driver disappeared after apron anything malicious on a CD.

    Thank you very much

    Check this box:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

    It should work! ;)

  • Satellite A210: ODD does not work - driver may be corrupted or missing - Code 39

    The STRANGE ('TSSTcorp CDDVDW TS - L632H ATA Device") does not work on my laptop more.

    In Device Manager, the Properties dialog box says "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    laptop: A210
    OS: Vista 32 bit

    I think the material is OK, as I install dual-boot linux, the STRANGE works very well under linux.

    I found updates of firmware STRANGE on the Toshiba site, but these cannot be installed with the drivers dysfunctional.

    Is it possible to find the drivers somewhere? (I can use google, but I don't know if driver download sites are trustworthy).

    Any other ideas?

    Hello

    This has been discussed a lot of time here;
    The workaround is;
    -remove the ODD of Device Manager
    -access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    -restart the laptop

    Good bye

  • I can't read a disk in my computor what can happen in the properties of windows cannot load the driver for this hardware device, the driver may be corrupted or missing (code 39) can anyone help

    I went to put in a cd to look and he wanted to get on-screen computor Ive seen it before, but for some reason any it stoped working. I went on a local drive Q and click with the right button to open it, but then it reads that q:\ is not accessible. access denied

    Hello

    1. on what application you are trying to read the disc?
    2. don't you make changes to your computer because of which the question began?
    3. is the relevant question to a specific application or a disk?
    4. what operating system is installed on your computer?

    There are many causes of Code 39 errors:
     
    * A required device driver is missing.
    * A required binary file is corrupted.
    * There is a problem with the file I/O process.
    * A pilot that refers to an entry point in another binary file cannot load.

    If you use Windows 7, we will first open the convenience store hardware and devices to perform automatic troubleshooting services.

    You can also click "Run now" to this article and check if this is useful.

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  • Windows cannot load the driver for cd/dvd

    I have an Inspiron 1521 AMD Turion 64 x 2 4 GB ram Vista running.

    Device Manager displays the dvd player error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».

    Pulling up the properties of the device, it shows the last and most successful driver is installed and try to update is not good.

    Suggestions to below a full re-installation would be appreciated.


  • Device Manager show that this driver may be corrupted or missing (error code: 39) on CD/DVD devices

    Device Manager has a yellow ball with an asterisk on the CD & DVD devices.  My computer does not display a device.  The Device Manager has a message that the driver may be corrupted or missing (Code 39).  It happened after uninstalling Norton and McAfee installation.  I uninstalled McAfee and tried to install the drivers.  I uninstalled and reinstalled the device.  Still no CD or DVD displayed in my count.  Everybody recognizes the problem?

    Original title: CD & DVD devices do not work

    Try following the steps under "Windows XP" in the article following the MS KB:

    http://support.Microsoft.com/kb/982116

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

  • SE error message: "Windows cannot load the driver for this hardware device. The unit may be damaged or missing. "When you try to install new drivers for DVD players

    Original title: CD/DVD drives do not work after upgrade from XP to Vista

    I upgraded my dell E521 to Vista dimension, but now finds that none of the CD/DVD drives work.  I also tried two external drives, same thing.  I downloaded the new drivers for the internal disks and when I tried to install the windows said they already had the best drivers.  Both drives are TSST - I get device status "windows cannot load the driver for this hardware device. The unit may be damaged or missing. "I want to upgrade to 7, but can not run the dvd, and apparently MS has no download available if you purchase cd!  Am tearing my hair!

    Hi krt2,

    In general, the error can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the process I/O file, or if a pilot that makes reference to an entry point in another binary file which can not load

    You can try to uninstall and reinstall the driver for the device to solve this problem.

    Step 1: Uninstall the CD/DVD driver. Follow this step to do the same thing:

    a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    b. expand CD-ROM/DVD-Rom drives-> right click on the device, and then click Properties.

    c. on the device properties dialog box, click the driver tab, and then click on uninstall.

    d. restart your computer.

    Step 2: Reinstall the CD/DVD driver by visiting the manufacturer's Web site.

    See the links below for more details on the update of drivers:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Also, read the following article and check if that helps.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

    My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

    Is anyone know how can I access my hard drive again?

    Thank you

    Hello

    You has made changes to the system before the error appearing?  Cancel the changes.

    (1) in Device Manager > right click on the driver, and then select uninstall

    Reboot and Windows will reload the driver

    (2) remove the upper & lower filters that cause errors in Code 31

    http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

    Access the manufacturer's Web site and search for updated driver

  • Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

    Original title - USB - IF xHCI USB Host Controller

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

    Hello

    USB devices remove all you can - restart the computer - is still there, the error? If it isn't
    It is related to one of the add-in devices that you removed. If she is still there, then, the question is
    either a device internal who can not remove or physically with the USB bus itself.
    If it was not there, add devices at a time until it is displayed - keep in mind that it is
    possible that there are two (or more) devices in conflict over the issue. Once you
    identified the check of the aircraft with the help of the manufacturer.

    1. to find the control panel - device - device - right-click on it - uninstall - Manager then
    Restart the computer to see if it clears.

    2. same place - double click on the device - driver tab - driver update - to see if that helps.

    3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
    online documentation and drivers, diagnostics and ask questions in their forums on all known
    questions. Update the Bios and chipset or other USB drivers.

    =====================================

    If necessary, we will use these additional troubleshooting methods:

    How to fix Code 31 errors
    http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Audio loss. UAA Bus Driver reads Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). All the patches?

    Audio loss.  Device Manager indicates Microsoft UAA Bus Driver as: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».  Tried to update driver and restore without success.  Tried the program of "Fix - It", which has identified an error with the sound system, but said that he could not fix it.  Restored to an earlier date but still what system did not go.  Tried to uninstall and reinstall the driver.  Uninstall was successful but reinstall it read that the hdaubus file does not exist.  I'm a computer dunce.  Any help out there?

    Hi BarbaraWolfe,
     

    There are many causes of Code 39 errors:

    • A required device driver is missing.
    • A required binary file is corrupted.
    • There is a problem with the file I/O process.
    • A driver that refers to an entry point in another binary file cannot load.
    Re-install the driver by downloading it from the link given:
     
    Additional reference on:
    Check if that helps.
  • Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

    Original title: the answer useful?

    Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

    Hello

    Code 39 means that the driver is corrupted or missing.

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    --------------------------------------------------------------

    Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
    are you can reinstall the 'old'. Many use Windows default drivers however some special aura
    ones. Also check the website of the manufacturer of the car.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Maybe you are looking for