Error: "Windows cannot verify the digital signature for the drivers required for this device (Code 52)"

Original title: Wireless cannot verify the digital signature for the card driver from son - after an automatic update of the software.

We downloaded an automatic update of our HP Pavilion laptop running Windows 7.  This disabled somehow the wireless network adapter.  Readings of the error; "Windows cannot verify the digital signature for the drivers required for this device.  A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or that might be malicious from an unknown source. (Code 52) ».  We tried 2 system restore - problem persisted.

I solved this problem to roll back the driver to that before the driver that is currently installed.  The wireless activated immediately when done.

Tags: Windows

Similar Questions

  • I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

    My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

    Is anyone know how can I access my hard drive again?

    Thank you

    Hello

    You has made changes to the system before the error appearing?  Cancel the changes.

    (1) in Device Manager > right click on the driver, and then select uninstall

    Reboot and Windows will reload the driver

    (2) remove the upper & lower filters that cause errors in Code 31

    http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

    Access the manufacturer's Web site and search for updated driver

  • Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

    Original title - USB - IF xHCI USB Host Controller

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

    Hello

    USB devices remove all you can - restart the computer - is still there, the error? If it isn't
    It is related to one of the add-in devices that you removed. If she is still there, then, the question is
    either a device internal who can not remove or physically with the USB bus itself.
    If it was not there, add devices at a time until it is displayed - keep in mind that it is
    possible that there are two (or more) devices in conflict over the issue. Once you
    identified the check of the aircraft with the help of the manufacturer.

    1. to find the control panel - device - device - right-click on it - uninstall - Manager then
    Restart the computer to see if it clears.

    2. same place - double click on the device - driver tab - driver update - to see if that helps.

    3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
    online documentation and drivers, diagnostics and ask questions in their forums on all known
    questions. Update the Bios and chipset or other USB drivers.

    =====================================

    If necessary, we will use these additional troubleshooting methods:

    How to fix Code 31 errors
    http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Get the error code 31 this device is not working properly because Windows cannot load the drivers required for this device.

    Original title: WAN miniport driver

    A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    I use windows 8 in my sony vaio
    MODEL - SVE15123CNW

    Hi Praveen,

    Perform the steps suggested by Nirmal S from the link below and see if it helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/i-get-an-error-code-31-in-Device-Manager/3364d05a-af20-4f6d-8597-b4b9f6a74b60

    Answer please if you have any questions.

  • My crashing after windows loading and I have this message - this device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Hello

    Have you tried to update the drivers as suggested by Basith M?

    Method 1:
    You can run the fix provided in the link and check out them.
    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/GP/hardware_device_problems


    Method 2:
    You can also try the procedure described in the link to troubleshoot driver issues.
    Tips for solving common driver problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

    See also the proposal contained in the link and check.
    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
    http://support.Microsoft.com/kb/932520/en-us
  • This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

    Jake

    Hey Jake,

    Follow these methods.

    Method 1: Follow these steps:

    (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

    (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

    (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

    Remove or reconfigure newly installed unit.

    Restore a version prior to updating the driver.

    Use system restore to undo the Device Manager recent related changes.

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Method 2: Update the latest graphic drivers.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  • Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Hello!

    I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

    "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

    When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

    Thank you!

    Hello

    You must get the drivers latset for m computer support site.

    Delete the "false: entry in Device Manager and install the new drivers."

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

    System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

    Thanx

    Hi rui2010,
     
    Place your machine in a clean boot State to see if another application is in conflict with the modem.
    If this fails, I recommend you reach out to the community Hauwei for assistance:

     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Norton 360 diagnosis reported: Microsoft ISATAP Adapter #2 is malfunctioning and windows cannot load the drivers required - code 31.

    Original title: ISATAP adapt #2 does not properly. How can I solve this problem?

    My Norton 360 diagnostic report detected a hardware device unusable.  The device type is: Microsoft ISATAP Adapter #2 and the device situation mentions that it is working properly and windows cannot load the drivers required - code 31.

    I think that it is also affecting my internet connection and disrupt its speed.

    Can you please help with this question?

    Thank you very much
    Tony

    Hi Tony,.

    You can try reinstalling the device driver and check if it works.
    Uninstall and reinstall the device in Device Manager.
    a. Click Start, type devmgmt.msc and press to enter.
    b. Locate the Microsoft ISATAP Adapter device
    c. right-click on the device and select uninstall
    d. restart the computer and check.

    You can also consult the following article:

    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
    http://support.Microsoft.com/default.aspx/KB/932520

    Hope this information is useful.

  • 0xc0000428 error - "Windows cannot verify the digital signature for this file."

    Original title: 0xc0000428 error

    I'm using Windows Vista and I already had the problem, "the Windows Boot Configuration data file is missing required information" which I have rebuilt the bcd for. Now it won't let me not restart due to the error 0xc0000428, stating "Windows cannot verify the digital signature for this file. How to do this?

    Hi Rajisace,

    ·         How long have you been faced with this problem?

    ·         You did it last changes before the show?

    ·         Please provide us with the file information in the error message.

    Method 1: Try to start the computer using the last good known Configuration and check if you can successfully start.

    Using the last good known Configuration

    http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

    Method 2: I will suggest you to do material clean boot and check to see if you encounter the same problem.

    1. right click on my computer-> properties

    2 Hardware tab Device Manager->

    3. right click on the sound card, video card and NIC, one by one, then click on turn off

    4 restart the computer.  If the problem is resolved, you can then enable the devices one by one to find the exact mechanism causing the problem

    After you find the device that is causing the problem you can solve by installing the latest driver or replacement of the unit.

    I will also propose you to check if the boot priority is set on hard drive and check if you experience the same problem.

    Method 3: Check a drive for errors

    http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

    Important:  If all available hard disk data can be lost when running chkdsk, as the chkdsk attempts to repair the affected area.

    Hope this information is useful.

  • Whith USB Device error: "Windows cannot verify the digital signature for the drivers required for this device...". (Code 52) »

    Original title: open usb drivers problem

    My Dell laptop stops working with USB storage drivers. The removable driver icon is displayed in the devices window and printers with a yellow triangle around!
    I've tried different USB drivers and the problem persists. I tried troubleshooting, and it does not help.
    In the Properties window, I get the following message:

    "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

    I don't remember making any hardware/software changes and do not know how to solve the problem.

    You are welcome.

    Something seems not quite right so contact the store can be a good idea.

    Back to the initial problem as I understand it, is that when you insert an external drive, you get the error 'code 52?

  • The laptop recovery Toshiba Satellite L505-S5997 problem error: Windows cannot verify the digital signature for the drivers required for this device

    I have a Toshiba Satellite L505-S5997 computer laptop and my hardrive recently crushed, impossible to restart.  I installed a SEAGATE 500 GB/sata/GO 16 MB of Cache, 7200 RPM hard drive. I ordered recovery for the computer disks and many of the drivers will not update or install without error that tells me that "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) "error.  Also, when I try to update Windows 7 I get the ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "When I try to download the service pack from the Web site it is usually interrupted with another error.  I tried to go to the Toshiba website and download the drivers needed and utitilities but nothing seems to work.  I am at a loss to try to seek and find a solution.

    Are you sure that the original problem was caused by a failure of the HD, did you test that the hd with the utility bootable disk from audit?

    As if you reinstalled to a new HD using that the required all defined recovery Tosh disk drivers would have been installed in this process.

    Assuming that Tosh then rebooted successfully after recovery, windows update would have run some important updates automatically. If that failed then it would seem that something is happening with your system.

  • I have error GETan say for this device does not properly because windows cannot load the drivers required for this device (code 31) to 6to4 adapt #2 and #7 wher can I get these re install

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: where can I find these adapters

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT

    Nothing else to do, Windows will do the rest. And you can ignore errors if
    you want and on some computers, it will always be there but don't cause any trouble.

    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the
    Map Microsoft ISATAP appears with a yellow exclamation mark next to it in device
    Manager and you also receive an error message
    http://support.Microsoft.com/kb/932520

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) my video card does not work why?

    can u help me quickly?

    Hello

    -For how long have you had the problem?
    -Did you change your computer, after which the question began?

    I suggest that you uninstall and reinstall the drivers for video card and check if that helps.

    Uninstall or reinstall a device

    Note: Not applicable for Windows Vista also.

  • Microsoft ISOTAP #14 adapter this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    can someone help me please, I need to fix this as its making the computer

    Hello

    Control Panel - devices - right click on - UNINSTALL - REBOOT Manager

    Nothing else to do, Windows will do the rest. And you can ignore the error if you wish and on some
    computers, it will always be there but no problem to be expected.

    On a Windows Vista-based computer or on a computer, Windows Server 2008, the card Microsoft ISATAP
    appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
    http://support.Microsoft.com/kb/932520

    Hardware devices not detected or does not
    http://support.Microsoft.com/GP/hardware_device_problems

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for

  • OfficeJet 4650: Officejet 4650 slow copy

    Copy takes MINUTES. Fine - print scans well.  Resolution of 200 DPI. Plugged directly into the wall. Software up to date. Hard reset is complete.  Problem started in the last weeks 1-2. Purshased February 2016.

  • Laptops Z61

    Can someone tell me if Win 2000 is compatible with the dual core systems? Thank you!!

  • Reverse ICloud upgrade

    MY iCloud storage completes a little so I went to see how much it costs to upgrade. I have improved, but I would return on payment at the moment because my credit card does not work and I have a small gift card balance. How can I do this?

  • Reason for the notification: 0xC004F009 (grace period expired).

    Separated from this thread. Diagnostic report (1.9.0027.0):-----------------------------------------Validation of Windows data--> Validation code: 50Code of Validation caching online: 0x0Windows product key: *-* - TMVMJ - BBMRX-3MBMVWindows product k

  • BlackBerry Smartphones BB Messanger keep ending conversations!

    Today my messanger BB keeps ending conversations and I think Miss me people send me messages.  Yesterday, I received a message asking if I wanted to clean up old messages to free up space.   My phone does this automatically now to make the space? not