Error: Windows is not registered in the new Dell Intel desktop computer.

Similar Questions

• poor wireless signal from the router to the new hp pavilion desktop computer

  getting poor signal wireless to the router to the new hp pavilion desktop computer. router 10 feet away. Help!

  Wireless router works fine for the 3 most old cell phones in the office.

  I heard that desktop computers receive wireless signals, but also laptops.  Is there a solution out there for this situation, in that I am?

  Thank you

  Roland

  whatifu wrote:

  A geek at Best Buy told me to open the box and put a few sheets of Tin around the antenna inside. What do you think?

  Roland

  Hello

  Also my suggestion BUT you need to do, of course, don't let touch to the Platinum

  All the best,

• Error: "Windows has not start because the following file is missing or currupt.

  Original title: System 32 error

  I have a netbook and wen as its turned on it just comes up with windows could not start because the followingfile is missin or currupt and askin and then reinstall how can I do this wth on a hard drive

  Hi Amandapowell,
   
  Try the steps listed in the following article and check if this can help:
  How do I recover from a corrupted registry that prevents Windows XP startup

• Problem creating ad hoc network-error: Windows could not set up the network.

  Original title: problem creating ad hoc network

  Hello dear,

  When I tried to set up an adhoc network and after entering the name and password of the network. Following up error message pop (Windows could not set up the network).

  I use windows 7.

  P.S. before I used to create the ad hoc network with no problems. But now no more.

  Kind regards

  Ana Paula Yousef

  Hello

   
  Did you change in the computer before this problem?
   
  I suggest to go through these steps and check.
   
  Method 1:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to " http://support.microsoft.com/kb/946481 ".
   
  You can also check:
   
  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking.

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• "When restarting, get the error, Windows could not start because the following file is missing or corrupt: < root Windows > \system32\ntoskrnl.exe.

  Original title: black screen

  Attempt to restart the Gateway system running XP Pro.  The message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe" Please reinstall a copy of this file.  What do I do and where is this file?

  There is a good chance that the disk check running the Recovery Console will solve the problem.

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

  If you do not have a Windows Xp disk, follow the instructions HERE to create a Windows Xp Recovery Console

• Unable to repair the connection of local error: Windows could not finish repairing the problem because the following action could not be completed

  Original title: Repair the connection to the local network.

  When I try to repair the connection to the local network I get the following message: "Windows could not finish repairing the problem because the following action could not be completed: clear the cache DNS."  For assistance, contact the person who manages your network. "How can I solve this problem?

  Hello

  1. what exactly is the problem you are experiencing when connecting with Internet?

  2. what type of Internet connection you have (wired or wireless) sound?

  3. don't you make changes to the computer until the problem occurred?

  Method 1: To resolve this issue, follow these steps:

  (a) click Start, click run, type services.msc, and then click OK.

  (b) in the list of services, click DNS Client.

  (c) ensure that the status column displays started and that the Startup Type Automaticcolumn.

  (d) if the service is not set to started or if the startup type for the DNS Client service is not set to Automatic, follow these steps:

  a. right click on Client DNS and then click Properties.

  b. in the Properties of the Client DNS dialog box, click the general tab and then click Automatic in the list Startup type .

  c. click Start, click applyand then click OK.

  Method 2: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

  Hope this information is useful.

• Pavilion p6 - 2120t: Windows will not start with the new graphics card

  Installed a Zotac GT 740 profile down in my desktop PC graphics card HP Pavilion p6 - 2120t and now the PC does not start.

  HP Pavilion p6 - 2120t CTO desktop PC

  Configuration:
  Intel Pentium CPU [email protected]
  4.0 GB RAM
  Intel HD Graphics Driver version Family: 8.15.10.2291 dated 27/01/2011
  Motherboard: IPISB-CU (Carmel2) (1 open PCI Express 16 expansion slot pins)

  BIOS to Version 7.18

  Running:
  Windows 7 Home premium 64-bit w/service pack 1
  Two monitors (VGA, 1 digital port 1)

  Before installing the new graphics card, I replaced the power supply original 300w with a 400w power supply.

  For starters, I disabled the onboard graphics in Device Manager. Then, I opened the case and installed the GT-740 in the open PCI Express slot. I made sure that the card was fully engaged in the slot.

  I plugged both monitors to their connections voted on the new map.

  When I tried to boot the PC, the digital monitor displays the screen HP (the one that indicates which key support to achieve the start menu) and then frozen. No other entries of key or mouse have been accepted.

  The PC then sounds 4 short beeps (about 10 seconds between each beep) and then a long beep before turning off the signal to the screen.

  Then, I removed the new graphics card on the PC that starts then. I have reactivated the original graphics drivers and the PC then worked normally.

  Tried the above process two more times with the same results.

  I then went into the start menu to look at the BIOS. The menu of the BIOS shows two options:

  > Sources of boot UEFI

  Windows Boot Manager

  > Sources of boot legacy

  ATAP I CD/DVD player

  SATA2

  Hard drive

  SATA0

  Network controller (Realtek PXE B06 D00)

  PC using UEFI Boot Manager Windows boots normally

  I have not tried Legacy Boot Sources because I don't know which one to choose.

  I went to the HP site and looked for an update to the newest BIOS, but updating them is a rev version 7.16 while my PC shows my BIOS to version 7.18

  I know that others have had a similar problem but I have not seen a solution that works for my PC.

  Any advice would be welcome.
  Thanks for your time.

  Hello

  Your PC isn't spec'd to run Windows 7 using the Windows Boot Manager.  I expect to a UEFI-based graphics card likely to work on an HP PC that does not have a BIOS version 8.

  The below listed OEM HP, graphics cards should work in your PC using a normal non - UEFI W7 and W8 installation.

  

• Windows will not install on the new drive for HP Pavilion Elite m9510f

  I have a HP Pavilion Elite m9510f operation with Windows Vista Home Premium 64 - bit SP1 and with a Seagate Barracuda 7200.11 HDD of 750 GB.

  The HARD drive broke down a few weeks ago and is unrecoverable.

  I bought Seagate 1 TB hard drive to replace the 750Go again and used the HP recovery discs provided by HP to wipe the disk and reinstall Windows on it.

  I can run all the recovery discs 3 without problem, the computer goes through its paces to reinstall Windows and all of a sudden, the computer stops and I get the message "installing Windows could not configure Windows to run on a hardware on this computer."

  What is happening with this?  I use a HARD drive with recovery disks provided by HP.

  HARD drive replacement need to be 750Go like the original?

  Any help would be appreciated

  Probably a problem with the hard drive being the new type of AF. Windows 7 with SP1 should work better than Vista... but your Vista key will not work with ISO download linked above.

• Unable to access store giving store error: Windows is not connected to the internet

  I got the Samsung R540 laptop series, recently updated OS in my current PC to windows 7 Home Edition premium windows 8 pro, but now, I came to know that I can't access windows store, it gives the error that you are not connected to the internet, also tried to connect to a Microsoft account through it It gives an error 0x800c0008. I tried all the commands cmd and instructions provided in your community.pls help

  Hello

  See the suggestions mentioned here and if they help you:

  http://www.kapilarya.com/cant-open-Windows-store-in-Windows-8

  Hope this helps, good luck :)

• Get "this copy of Windows is not genuine" on the laptop Dell preinstalled

  When I turned on my Dell laptop this AM, I noticed a message in the lower-right corner of the start screen: "this copy of Windows is not genuine" what is happening here?  The computer was preinstalled by Dell on a new laptop computer less than a year ago...

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

• C510a: C510a software will not install on the new Dell laptop - can not find USB ports

  I just bought a new laptop Dell 7710, running Windows 7.  When I try to install the driver software for my printer HP C510a, Setup performs a check of the system and tells me that I don't have a USB port, and the option that provides the installation routine is to interrupt the installation.  I have 4 ports USB 3.0, which work very well with any other USB device that I've plugged into them.  I downloaded the latest version of the software C510a driver and still have the same problem.  I really same useless USB port on the printer because I connect via my WiFi network.  I run HP diagnostics in order to try to identify the problem and that they can find the printer and identify it on the WiFi network, and they also recognized as USB ports.   But the software C510a stilll don't have USB ports and refuses to load.

  How can I get HP to fix their software driver for a product that is not common, but always prints as well as ever?  It is also mute to require the presence of a port which is not required to connect to the printer.  If I replace theis printer in order to print from this computer, the replacement will certainly not be another HP.

  Hello.

  Inside, File Explorer type folder in the address bar and press ENTER.

  Search the last HP installation file that begins with 7Z (e.g. 7zs1234)

  Open the installation folder.

  Find the file usbready.exe and rename it to usbready.old

  Browse a level upwards and double-click Setup.exe, now follow the installation and check for the difference.

• My genuine Window Vista could not search for the new update, or errors are: Code 80073712

  My genuine Window Vista could not search for the new update, or errors are: Code 80073712

  If you forget to say 'thank you '?

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821

  0 x 80073712 ERROR_SXS_COMPONENT_STORE_CORRUPT component store is in an inconsistent state.

  TaurArian [MVP] 2005-2010 - Update Services

• I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, it goes well until the installation of the updates, but installation ends, it displays error windows could not update

  I have windows 7 ultimate works correctly. I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, he is well until the installation of the updates but the installation finished, it displays error windows could not update the configuration to start the computer.  not installing and it rolls supports everything. Please help me solve this problem

  original title: windows 7 gamer edition

  Download of software on these sites can be very risky, because the origin of the files are usually edited and its quite possible that they could have injected malicious code in it.

  Windows 7 Gamer edition is not a developed Microsoft or affiliated with the product, what appears to be a customized image of Windows 7 that authors customized to remove or add Windows components, which can also be very problematic.

  You use something that no one can help you consider he has probably been reverse engineered and probably injected by a malicious code like spyware (keyloggers, rootkits, worms, viruses). I suggest you stick to Windows 7 Ultimate, this is the most complete edition of Windows 7, anyone can have.

  Resources:
  The Dangers of the purchase or use of software pirates - Notebooks.com

• Error during the download of Windows 8 on Windows 7: "download failed. The download task has not completed. The new attempt at repair by block limit has been exceeded. The file is corrupted. »

  Currently, I have Windows 7 and had to buy Windows 8 for the school. I tried downloading it several times, but when she writes the check, it is said, "Download unsuccessful. The download task has not completed. The new attempt at repair by block limit has been exceeded. The file is corrupted. »

  I don't know what to do.

  Original title: download Windows 8 Windows 7

  Hello Travis,

  Thanks for posting your question on the Forums of community of Microsoft.

  To better understand the issue please help us with these questions.

  from which site you try to download Windows 8?

  b. what browser do you use to download?

  c. you try to download a full version or update?

  d. you run the upgrade wizard before trying to download the Windows 8?

  This problem usually occurs due to the installation of Web the contents of the folder in the system. So, now, I you suggest to rename or delete the installation folder to the following location and then try to download Windows 8:

  C:\Users\\AppData\Local\Microsoft\Web install

  See also the link mentioned to follow the correct steps before and during the installation of Windows 8 below:
  How to upgrade to Windows 8

  Note: I strongly recommend to back up all your important files and folders on an external storage device before performing any type of upgrade of the OS.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Error message: the 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local computer.

  Hello

  I've successfully installed the NCLEX - RN 4000 on Microsoft Windows 7 Home Premium edition. However, I get the error message "the"Microsoft.Jet.OLEDB.4.0 provider is not registered on the local computer"whenever I try to open the program.» The package says that the software is compatible with versions of Microsoft Windows Vista and XP. I tried to open the program using program compatibility issues resolution which did not work. I also do a right-click on the icon and choose Properties/compatibility and then selected the most recent Microsoft Windows OS program is compatible with and apply the settings. To my dismay, it was also a no go. I did some research and reading that Microsoft Windows 7 Home Premium 64-bit is not compatible with the programs .msi. So, I checked and found out that the file ends by .msi.

  With all that said, these are the questions that I find myself with:

  What can I do to fix this so that I can use my 4000 NCLEX-RN program?

  Why Microsoft Windows 7 is not backward compatible?

  Any help with this problem would be greatly appreciated!

  Thank you very much!

  UPDATED: Wednesday, April 21, 2010

  If someone else has the same problem when you try to run the NCLEX-RN 4000 program on the Windows 7 operating system, you will need to contact Wolters Kluwer Health (the manufacturer of the NCLEX-RN 4000 Review program). The customer service number is 1-800-638-3030. Once you reach a customer service representative explain why you call and they will send you by e-mail an update that will allow the NCLEX-RN 4000 to run on the Windows 7 operating system. Please do not hesitate to ask if you have any questions! And thanks to all who have responded to this topic! I enjoyed all your comments!