Error - windows search on the local computer started and then stopped. Could not start the Windows Search service.

Similar Questions

• the service windows defender on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  the service windows defender on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Error 711 The Secure Socket Tunneling Protocol Service service on Local computer started and then stopped. ." Unable to connect to the Internet

  Original title: I get error 711 when I try to connect to the internet via a UIM modem on my windows overpriced home 7 SP 1

  Did some research and tried manually from the phone, RACM, RACM auto and plug and play services but got error 1068.Tried to start the service SSTP to solve this problem but got the error "the Service of Protocol Secure Socket Tunneling courier on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. »

  I am so desperate and would appreciate helpful suggestions.

  Hello

  1. When was the last time it worked?

  2 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If the steps is not enough, go to method 2.

  Method 2:

  Ensure that all dependencies of Service Remote Access Connection Manager components are started and set to automatic

  (a) (a) cliquer click on start-run, type services.msc, the, click OK.

  (b) ensure that the following services are started on and set to automatic.

  (c) make sure that the "Startup Type" says "automatic"and has begun.» If it isn't, use the drop down menu to change (under the general tab).

  (d) if she once said: "Automatic", then click on the "Recovery" tab in the upper part and replace the line "First failure" "Restart the Service", then click on ""apply ', then OK. "

  See also:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this helps and keep us posted.

• The Apple Mobile Device Service service on Local computer started and then stopped.

  My iDevice doesn't connect to iTunes, I think its a result of the apple mobile device service. The restart option doesn't come up, it just says  "start the service" and when I click that an error comes up which says "The Apple Mobile Device Service service on Local Computer started and then stopped. Some services stop automatically if not in use by other services or programs". (I've already got a post with this information on I just wanted to make it more clear)

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.3.3.17 to 12.3.2.35, for example, then you will also need restore the database in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• After you apply the fixit on windows update error 8000ffff PC starts "prosessing update 3 50%" and then stops again and again

  have had windows update problems for awhile now, 8 months or more

  I did E-mail support instructions for a few weeks with the help of computer technology

  Error 80070057

  Asked to uninstall Kaspersky AV

  same error

  Tech found the personal firewall that still on the pc of the previous installation using msconfig and unintalled using a program uninstaller for ca

  restarted and I have tried to update again and had error 8000ffff

  This led the tech to run microsoft fixit in default mode

  now, loops start mode PC rises to the small circular windows vista logo then says appliing update 3 3 50% sayes welcom and then stops, restarts, and loops on this subject.

  Can I get the pc to boot wihtout install updates?

  Tried safe mode and last good config known

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt

  Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt. The same is not solved.

  I'm unable to locate networks wireless on my Windows 7 PC. Help, please.

  Try to uninstall/reinstall the drivers for your wireless network. You should be able to get them from from Toshiba Web site.

  I hope this helps.

• Service server vmware vcenter orchestrator on local computer started and then stopped

  Hello

  I'm unable to start the Server service of vco on Windows 2008 R2 machine. If I try to restart the service it displays the following error;

  "Service server vmware vcenter orchestrator on local computer started and then stopped. "Some services stop automatically when not in use by other services or programs.

  Can someone give me the solution for this?

  Thank you

  Radhika

  First check the configuration of the vCO application and that all green lights. If this isn't the case difficulty what the problem is.

  If everything is green, see the server.log file and look for FATAL / ERROR.

• Windows Installer error - "Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed correctly"

  Original title: Windows Installer could not access
  I am running Vista Home Premium x 64.  Recently when I try to install/upgrade programs up-to-date currently any Apple IE iTunes Quicktime and Safari I get this message.

  Windows Installer service could not be accessed.  This can occur if Windows Installer is not installed properly.

  The window update fails on the stage of the installation.  I have read several threads and tried several fixes, but without success.
  I have disabled/restarted/activated/restarted and switched to manual, auto and back with no success. When I try to force an early Setup, I get the following message:
  The Windows Installer service on Local computer started and then stopped.  Some services stop automatically that they are not in use by other services or programs. 
  I deleted the temp under apps folder.  I copied the reg. Since a sound Vista machine and imported into my machine setup.  I tried again with a reg. offered in one of the sons, all with no change.
  I tried to install version 4.5, but was unsuccessful (it looks like I got lucky there).
  May be related or yet another problem, whenever I have Windows Live Mail, a ope 'preparation for the installation of window lights up for about 15 seconds before disappearing and then my mail opens.
  I don't have a Vista CD.  My HP provides on a partitioned drive recovery files.  There seems to be no usable on my computer restore points.
  Ideas?  Help?
   

  Hello

  What happened when you tried to install Windows install version 4.5? You get an error?

  Follow these methods and check if it solves the problem:

  Method 1:
  Auditor of files (SFC) system scan on your computer. SFCscanwill make Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. click on continue or provide administrator credentials if prompted.
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow

  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

  Method 2:
  After analysis of SFC running, try again to install Windows Installer 4.5 Redistributable.

  Refer to this article:
  http://support.Microsoft.com/kb/942288/en-AU

   

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I downloaded ie9, it does not open. a window opens as it tries to start and then stops (very quickly)

  I downloaded ie9, it does not open. a window opens as it tries and then stops (very quickly) no error messages appear.

  I tried to reinstall, ran a scan for problems, the saved settings. I can still access to safari or chrome.
  I noticed that some other features in windows now do the same thing while trying to open a new window and it does not work. I have vista 32 bit.
  IE9 is showing as a program and all the settings seem ok
  my windows will not install updates?

  Hi Robin,

  Since you are facing problems of opening IE 9 and a few other features in Windows, you can try these steps and see if it helps

  Step 1:

  Check if the problem persists in safe mode with network.

  Start your computer in safe mode

  Step 2:

  If you do not experience the problem in safe mode with networking, you can try to perform a clean boot and see if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• "Windows Store" your purchase could not be completed: something happened and your purchase could not be achieved "why is this error that occur?

  When you try to download any application in the Windows store I get the error message "your purchase could not be completed: something happened and your purchase could not be completed. I am connected to the internet and signed on my Microsoft account. It's a common mistake others are experiancing?

  Hi, Simeon,.

  Are you by chance using the built-in administrator account?

  Have you tried to clear the cache to store (if you are facing the same question that Gaara was)?

  From the Office:
  Press the Windows key + R
  Type WSReset.exe and press enter
  Reset

  You can also try the following:

  The process below will put you in a "clean boot" that allows only Microsoft services to run at startup. This will prevent only 3rd-party programs and services from loading at startup.

  From the desktop:
  Press Windows key + R
  In the run box, type msconfig and press enter
  On the Services tab, select hide all Microsoft services and click on disable all the
  On the Startup tab, click to open the Task Manager
  On the Startup tab, right-click and disable each startup item and then close the Task Manager
  Click apply/OK on the System Configuration screen, then restart

  Once you have completed the test, remember to set your computer to a normal startup.

  @Gaara, do you remember what test you ran exactly?

  Thank you!

• ORA-29702: an error has occurred in the operation of Service of Cluster Group

  Hello
  
  After closing down a knot trying unsuccessfully at the start of this node:
  
  SQL > startup
  ORA-29702: an error has occurred in the operation of Service of Cluster Group
  
  I got this message.
  
  Here is a log of file: orcl2_lmon_13886.trc
  
  */Oracle/admin/ORCL/bdump/orcl2_lmon_13886.TRC*
  Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64 bit Production
  With the options of partitioning, Real Application Clusters and Data Mining
  ORACLE_HOME = / oracle/DB
  Name of the system: Linux
  Name of the node: DB2
  News Release: 2.6.18 - 53.el5
  Version: #1 SMP Wed Oct 10 16:34:19 EDT 2007
  Machine: x86_64
  Instance name: orcl2
  Redo thread mounted by this instance: 0 < none >
  Oracle process number: 5
  The Unix process PID: 13886, image: oracle@DB2 (MON)
  
  :() 2008-12-19 10:08:26.214 SERVICE NAME *.
  SESSION ID: (1102.1) 2008-12-19 10:08:26.214 *.
  21522 GHG 8 resource pool
  GHG enqueues 33158
  GES CPI: Receivers 3 shippers 3
  GES CPI: Buffers receive 1000 Send (i: 2750 b:1934) reserve 1000
  GES CPI: Msg 408 lot 8192 regular size
  Factor of batch processing: enqueue replay ack 201, 224
  Factor of batch processing: cache size 126 by 64 lock replay
  kjxggin: receive buffer size = 32768
  clsc_connect: (0x1d19a030) no listener to (ADDRESS = (PROTOCOL = ipc) (KEY = OCSSD_LL_db2_crs))
  * 2008-12-19 10:08:29.819: CSSCLNTclsssInitNative: connection failed, rc 9 *.
  kgxgncin: SATC init failed with status 3
  kjxgmin: kgxgncin failed - (2)
  kjxggin: generic group layer init fails
  2008-12-19 10:08:29.819 *.
  Stopping the queue Service global
  2008-12-19 10:08:29.820 *.
  enqueue global service detach CM:pid = 13886
  
  I did check the listener, it didn't work, but I start it:
  
  LSNRCTL > status
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  Alias LISTENER
  Version TNSLSNR for Linux: release 10.2.0.3.0 - Production
  Start date December 19, 2008 10:49:42
  Uptime 0 days 0 h 3 min 55 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP ON
  Parameter Listener of the /oracle/DB/network/admin/listener.ora file
  The listener log file /Oracle/DB/network/log/listener.log
  Summary of endpoints listening...
  * (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=localhost.localdomain) (PORT = 1521))) *.
  The listener supports no services
  The command completed successfully
  LSNRCTL >
  
  Could you give me a guide how to start this node? or where is a problem?

  Before the start of the database, you can, you must start the CRS.

• When I enter an apostrophe when online, it still shows the quick search box, and then I can not type more

  original title: quick search

  When I enter an apostrophe when online, it still shows the quick search box, and then I can not type more

  Hello
  
  1. it occurs when you use a particular application or all applications?
  2 have you tried to use a different keyboard?
  
  Method 1.
  Check what happens when you use the on-screen keyboard. If it works fine here so you can check using another keyboard.
   
   
  Method 2.
  If the problem persists using a keyboard screen ion then run the sfc scan and check.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
   
  To do this, follow these steps:
  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
   
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows m player dia will not play a cd. It starts and then stops and then freezes

  It will play all the music library but not from a cd in my dvd/cd drive. It plays for about 20-30 seconds and then stops, if you click on the screen it faints and freezes.

  Hello

  Could you please answer my questions in the previous post dated September 2?

   

  Also try the following article:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  Back up the registry:

  http://Windows.Microsoft.com/en-my/Windows7/back-up-the-registry

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

   

  Note: See in particular article regardless of the error message.

• With Photoshop CS6 on my iMac, I got an error message on the Setup with error # 1. He suggested deleting PS CS6 and then re - install. Idid, reinstall using Time Machine. I will then he sane error message. I recently changed my OS t

  With Photoshop CS6 on my iMac, I got an error message on the Setup with error # 1. He suggested deleting PS CS6 and then re - install. Idid, reinstall using Time Machine. Then, I got the same error message. I recently changed my OS to El Capitan.

  Migration of Mac with Time Machine WILL NOT WORK with the Adobe program activations due to hidden registration files

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

• Windows media player, when I try to download a cd, it burns completely to 99% and then stops with an error message indicating that it may miss a codec.

  When I try to download a cd, it burns all the way to 99% and then stops with an error message indicating that it may miss a codec. How could I be missing this and how I get it back or find exactly what it is that I'm missing? Help!

  Hi jeanamae,

  the error message shows which codec is missing?

  Is there a 'additional information' icon or the link?

  Try to reduce the speed of the burn and see if you get the same question.

  B Eddie