Error "Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "When you try to install Windows.

Similar Questions

• Window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application when you try to run Microsoft solve this diagnosis

  Original title: Microsoft Fix it diagnosis

  I ran Microsoft solve this diagnosis. He gave me a window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application.  someone knows how to fix this?

  Thank you

  FOR EXAMPLE

  Hello

  Thanks for the reply. Until I'm your answer I have restored the laptop to the State of origin, with the possibility of restoring elements that had been added by the user. I'm trying to update windows, etc.. If I get errors or problems I will post them here. Thanks for your detailed response.

  Eddie

• Error "have sufficient privileges to complete this installation for all users of the machine. "log on as an administrator and try again the installation" when you try to install iTunes

  Original title:

  I just installed windows7, I had to uninstall itunes in order to complete the instalation of windows7. everything went well until I tried to reinstall itunes.

  During this process, I get the message "you don't have sufficient privileges to complete this installation for all users of the machine. log on as an administrator and try this installation again. ». but I am logged on as administrator.

  Hello

  To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.

  Method 1:

  Right click on the installer for iTunes and click Run as administrator.

  Method 2:

  Disable user account control settings and check.

  Enable or disable the User Account Control

  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. Disabling it can make your compromised computer. Please make sure that enable you UAC, once you have completed troubleshooting.

  Method 3:

  Allow the default Administrator and try to install it in this user account.

  a.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.

  b.Type in the following command and press ENTER.

  NET user administrator / active: yes

  c.Log disable the current user account and log in to the user called Administrator account.

  d.Install iTunes in this default Administrator account.

  e.Once of that installation is complete, the default administrator is disconnected.

  f. log in to your user account.

  g.Disable the default Administrator account. Follow these steps.

  i.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.

  II. type the following command and press ENTER.

  NET user administrator / active: No.

• I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work.

  I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work. I have Windows 7 and it started only caused since last week. Can someone give me an idea on how to solve this problem?

  When you have McAfee running, he provided the Firewall & automatically deleted the Windows Firewall.   Panel\Windows Firewall control page should have shown a message say.  If you managed to change the settings for the Windows Firewall then you might have corrupted both the McAfee & Windows Firewall.

  I really think you should try a restore for some time point before you tried modifications, if that is even possible.

  If you have uninstalled McAfee Control Panel, programs, then you must also run the Tool McAfee Consumer Product Removal or you will get several unpredictable problems.

  If you still have problems after running the McAfee tool then it could be the result of the previous Windows Firewall changes & the corruption of the system resulting.  Your system is in an unknown state as a result of these changes.

  You can try running SFC/scannow in an admin command prompt, but it wouldn't do any good.

  You may need to use the installation DVD to do a repair installation.  I hope get you lucky, but you may need to do a complete reinstall of Windows.

• 1001 error code in the registry when you try to remove an old program using programs and features in Control Panel. How can I fix?

  1001 error code in the registry when you try to remove an old program using programs and features in Control Panel.  How can I fix?

  Computer Windows 7

  Tried to reinstall the older version, she received error 1001 something again with the registry.   Does not remove old software.

  Hi Carol,

  1. what program or software you are trying to delete?

  2. What is the code or an exact error message?

  Please provide us with more information on the specific question, to find a solution as soon as possible.

  Follow the link below and check them with the question:

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  I hope this helps.

• Why do I get a message saying that I am not connected to the Internet when you try to install IOS 9.3?

  WWhy I get a message saying that I am not connected to the Internet when you try to install IOS 9.3?

  It is a known issue and Apple is working on a fix for 9.3. This article summarizes some of the problems with the current version.

  http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/

• Error: "Windows could not complete the format" when you try to write to blank DVDs

  I get this error when you try to copy files to a blank DVD.  I am trying to drag and drop files into the dvd player and after a small roar, the dvd ram drive stops and the error message.  Then the drive no longer recognizes blank dvd inside.  I am running Vista 32 bit and my dvd ram is a matshita dvd - ram uj880as ata.  I tried to switch to the microsoft 'FixIt' site, but the problem is not resolved.  I think that the report mentioned that the reader could recognize not writable or something to that extent.  The player can play DVDs fine, however.  Is there a solution to this problem by replacing the dvd ram drive?

  Hello

  Have you tried to close all programs and then insert the disc to see what is happening? Try a slower
  speed or mastered format. Have you added any burning new software lately - these tend to compete
  for resources and can interfere with each other.

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  ====================================

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and you can write on the outside edge.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite 2435 powers off the power when you try to install the recovery CD of OS

  Happy new year

  Satellite 2435 powers off accidentally when trying to install the operating system from disk with Windows XP Pro startup disk or recovery.

  When starting and working with Winternals AdminPak 5.0, Portable Edition Windows or Dos 6.22 it works stable.
  When booting with the disk recovery he died each time in a different position - when partition formatting, copying the files, etc..

  Hardware problems, isn't? And is it possible to determine and solve the problem at home (because we now hoildays, services does not work)?

  Thank you in advance.

  (Sorry I don't speak English very well)

  When I had my old computer I encountered similar problems in Windows XP and the Windows XP installation. There is a WinXP option to disable the auto-restarting after a problem, instead of restarting, a blue screen stating that the problem appeared. I lived during the installation of WinXP blue screens every time at various times as you and your power off, he appeared on the different WinXP CD (without SP, SP2 with nlite, etc.).

  Maybe your "power off" is hidden blue screen too, but I'm not sure. If this is the case, it may be a hardware problem, so you should test your RAM, your drive hard, etc., for example using memtest for your RAM and the built-in WinXP 'chkdsk '.

  It's probably hardware problems. Were you ever able to correctly use the disk without problem in the past, or is this the first time you try to use the recovery disk?

• keep windows closed, unable to backup or recovery. message: the computer restarted unexpectedly or encountered an unexpected reeor. Windows Setup cannot continue. to install windows,...

  my HP vista sys cannot repair or recovery. I tried to reformat the harddriver still does not. Please advice.

  Thank you

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  Contact HP

  http://welcome.HP.com/country/us/en/contact_us.html

  HP support forums

  http://h30434.www3.HP.com/

• Error - there is a problem with the external Setup program and it must be closed when you try to install windows updates

  Original title: How can I fix external MSI?

  When I try to download the updates, the error message says there is a problem with the external Setup program and it must be closed.  Updates will not be installed.  Anyone know how to solve this problem...?

  Hi John,.

  ·         You are able to install other applications on the computer?

  It seems to be a problem with the corruption of the .net framework. I suggest trying to repair the .net framework on the computer and see if you can install the updates.

  http://support.Microsoft.com/kb/923100

  Hope the helps of information.

• 490 of the code when you try to install windows update

  I had problems trying to down load this an update a few months I n ' t know what that reason is quite different, we do very well. "

  When installing updates using Windows update or Microsoft Update you may receive error 643 0 x or 0 x 80070643 (ignore the numbers of error, if necessary)
  http://support.Microsoft.com/kb/976982

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220

  =====================

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://support.Microsoft.com/kb/318785

  Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100

  After the the .NET Framework Cleanup tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Errors in the world when you try to reinstall Windows XP on a new hard drive.

  Original title: errors everywhere!

  Hi all:

  I recently bought a new hard drive (seagate momentus xt) for my older PC toshiba M70 laptop. I tried to re - install Win XP on the recovery disk (which came with the laptop) but I got a black screen with cursor. I repeated the collection, same thing. To check that all was well with the disc, I scanned and then installed ubuntu 9.04 it work perfect! What is interesting is that in the prior installation, he showed that win xp has been installed on the disk. Then I tried to re - install win xp - then I got this error Grub 17... I went back with the facilities and now I'm at a point where I get a message "error: unknown filesystem grub rescue >" (after the installation of ubuntu 11.04, then windows again). I don't know what to do. What I want is my xp back, I can't get ubuntu. Help, please.
  Thanks in advance.

  Hi ARolle,

  ·         It is reinstall drive?

  Method 1: Load default BIOS (Basic Input\Output System) settings, and then restart the computer. Make sure that you have the CD drive set as first boot device. Check the settings by consulting the manual or call the manufacturer to do so.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Method 2: Try to boot from the CD and see if you can start the installation.

  Contact Toshiba to get more information on the type of disc you use to reinstall Windows.

• "not enough memory to complete the operation" when you try to update the USB mouse driver in Windows 7

  USB mouse does not work. Driver must be installed. When trying to update driver get error message "not enough memory for operation of somplete.

  Hello

  1. What is the brand and model of the mouse?
  2. don't you get the same error message when you connect the mouse to a different USB port?

  I suggest you try the steps from the following link:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-fixing-common-driver-problems

  See also the link:  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  We know if you need help. We will be happy to help you.

• Why the 'AccountDetails' window give me only backward, finishing, cancel the options when you try to create a Firefox Sync account and does not allow me to set up complete?

  I'm trying to set up Firefox sync. I go to tools > configure sync.
  The box opens.
  I click on "create a new account. I have complete my account information. The only options I give at the bottom of the box are 'Back', 'End', 'Cancel '. There is no button "next". I click on "Finish" and the box disappears. "Even when I try to click on" Synchronization Options "nothing happens.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Error "this computer does not meet the minimum requirements for installing the software" when you try to install Intel_ME_Driver.

  Original title: error this computer does not meet the minimum requirements for installing the software

  I tried to install Intel_ME_Driver because I have updated my pc to win7 for win8 when I try to install they showed me an error message saying: this computer meets the requirements for the installation of the software need to I do?

  Use the Intel Driver Update utility

  Utility update Intel drivers allows you to get the latest drivers for audio, network, other components: http://is.gd/jQGR7

• Titles and effects in Windows Movie Maker transition are passed in the movie when you try to add a new video

  Cannot add a new item at the beginning of the video - Please HELP! __

  Hello

  I edited a video in WMM, registered, it's all good.

  now, I need to add a little extra clip at the beginning of the recorded movie. but when I have to add to the beginning (I just drag and drop it at the beginning), it seems to push all my effects of transitions and titles forwards in the film. If the titles that are supposed to before some clips are now pushed more in other clips or clips that appear later in the film!

  is there a way to avoid this problem?

  I appreciate any help!

  Thank you
  jump

  Hello

  I edited a video in WMM, registered, it's all good.

  now, I need to add a little extra clip at the beginning of the recorded movie. but when I have to add to the beginning (I just drag and drop it at the beginning), it seems to push all my effects of transitions and titles forwards in the film. If the titles that are supposed to before some clips are now pushed more in other clips or clips that appear later in the film!

  is there a way to avoid this problem?

  I appreciate any help!

  Thank you
  jump

  =====================================
  If publish you (save) project in the format of video .wmv
  in a folder on your drive hard drive... and then reimport the .wmv
  film of the file and drag it on the timeline (as a new project)...
  the items will be more separated and you can add
  your new clip at the beginning without disturbing anything.
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.