Error Windows update cannot currently check the updates because the service is not running, you must start the computer, windows update services does not
Original title: Windows Update service is not running / working and is not listed in services.msc
When I go to windows update a red shield with a white cross appears and when I click search for updates this message appears:
"Windows update cannot currently check updates because the service does not work, you will need to start the computer"
* Restared several times-nothing has changed
Despite what other threads have advised to:
I checked in the services and WINDOWS UPDATE, Background Intelligent Transfer Service or encryption services are not listed!
* I have changed the settings to "Never search updates" and then back to "install updates automatically" - nothing has changed
* I ran the Malicious Software Removal Tool http://www.microsoft.com/security/pc-security/malware-removal.aspx- we say that everything was ok, but I can't always verify updates
* I ran the download to reset windows update components http://support.microsoft.com/kb/971058/en-us but still I can not check updates
(Nothing is in the update history)
Am really worried!
Thank you!
Hello
Have you made changes on the computer before this problem?
You can try to start the fix - it and check. Check out the following link.
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
Method 3:
I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.
Tags: Windows
Similar Questions
-
Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.
I am currently using windows 32 bit vist
I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!
Suggestions?
Hello
1. have you made changes on the computer before this problem?
2. which antivirus app do you use?
I suggest you try these methods and check.
Method 1:
Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.
Disable the antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Method 2:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registryMethod 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.
Follow these steps:
a. click the Start button, click computer.
b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
Where 'C' is the drive of operating system
c. delete the log file, and then restart the computer and check the issue. -
Original title: Impossible to update Windows 7 on Netbook
I have a Samsung Netbook running Windows 7, but can not run Windows Update
Each ime that I try to run the update, I get the following message.
Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.
Hello
Follow the steps from the links below and check if the problem persists.Method 1: Run the Troubleshooting Utility from the link below and check if it helps.Problems with installing updatesMethod 2: Run the FIXIT in the below mentioned link and check if it helps.How to get the latest version of the Windows Update Agent to help manage updates on a computer?Hope this information helps. -
Whenever I have click search for updates in Windows Update and it just gives me the error message: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer. Can someone help me please? I'm using Windows Vista Basic
Hello
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
or please repost your question in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
My computer stops the update via WIndows Update Component
Whenever a try to do the manual update using this component I get the message; * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...
My computer has a few updates, but can not run these update
Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating
He starts to run updates 1 of 13... and stops
If I shutdown normal e, computer stay likehanging 1 hour without stopping.
I would like to know how to solve this problem
Thank you
Concerning
Gladmar.
Hello
Were there any changes made on the computer before the show?
Perform the following methods and check:
Method 1:
I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:
a. click Start, type services.msc and press enter.
b. search Windows Update.
c. right-click on the service and select Properties.
d. in type of startup, select enable.
e. click Start under the Service status.
f. click OK.
g. Repeat steps c to f for the following services:Background Intelligent Transfer Service
Cryptographic servicesIf the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.
Method 2:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058Method 3:
Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:
Disable the antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-softwareNote: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 4:
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/
See also:
Troubleshoot problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updatesUpdates: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questionsI hope this helps.
-
Windows Vista SP2 from worm 6.0.6002 Build 6002. KB2675157 Explorer 9.0.8112. Runing Norton 360 6.2.1.5 (I disabled the two virus checking a firewall). My problem is that I ran Windows Update and go on a popup message: Windows Update cannot currently check the updates, because the service is not running. I ran last update of Windows in April and he was properly executed. I run FixIt 50202 and checked that wuauserv, misiserver, bits, cryptsvc, and workstation are started. I am able to run updates on all the software outside of windows. I ran recently updated for Radeon Catalyst Control Center, Safari, Chrome, and various Adobe products. I don't have another PC with Vista I can compare the registry entries.
Hello
Method 1: The problem with Microsoft Windows Update is not working: http://support.microsoft.com/mats/windows_update/
Method 2: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058
Method 3 :
Try to set up your computer in a clean boot state, and then check to see if the same problem occurs.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Hope this information is useful.
-
Original title: Windows Update No. Longer - Vista business functions
Last month my Win Vista will not update, little matter how many times I try to do. I always get the error message "Windows cannot currently check for updates because the service is not running." You may have to restart your computer. "Control via msconfig reveals that he is ticked as"running ".
I run Microsoft Fixit has several times. It is said he has "solved" the problem, but it did not work. Of course there is a corrupted somewhere file that needs to be replaced.
Please don't say no "update for Win 7" or "Reinstall Windows" because it's not just going to happen.
Thanks in advance,
Hello
1. you remember to make changes to the computer before this problem?
2. what anti-virus software is installed on your computer?
Follow these methods.
Method 1: Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.
Disable the antivirus software
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registryMethod 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.
Follow these steps:
a. click the Start button, click computer.
b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
c. delete the log file, and then restart the computer and check the issue.
Well, it's going to be a long Chronicle, but in the end, the problem has been resolved. Please bear with me:
Running the program MS Fixit in the past without success, I tried to run the update after you temporarily disable AVG, my program AV. no joy.
I then ran CC Cleaner to get rid of some of 'dead weight '. I even used its registry cleaning option (which included saves).
At that point, I did some 'household', & began to defragment my HD with Defraggler. But since it seems to take forever, I went to My Defrag, who finished the job much quicker.
Although I tried to delete the edb.log file using method 3, I kept getting a message system which was unable to complete this action because the file has been opened in another program. In the end, I was able to delete the file, but fact directly through Explorer. There also seems to be a sort of small file edb.log, indicating that it was a "recovered" version I deleted that one as well.
At this point, I ran MS Fixit, who States that the Windows Update components needed to be fixed and proceeded to do so again. Because he had allegedly "fixed" my Updater in the past, I was not holding much hope that this time would be any different. So, after that what he has done, I was pleasantly surprised, I might actually start updating!
However, the update message that a new version would be dl before I could go any further. So I did it.
When the new version is started, it ran for about 10 minutes, coming with about 50 updates. According to flush out those who were of no use to me, finally I had dl and installed all relevant updates. And now, the update seems to work fine.
Once again, my apologies for the long answer. But I wanted to tell the whole story, as I did not quite plan of RajithR.
Thank you!
-
Original title - Vista sp2 64-bit windows program update is not running
When I open the program "Windows Update", it has an "X" in a red shield symbol. When I click on the tab "Check for updates", I instantly get a message that says: "the Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. When I click on the button 'Start' and the window appears with the options of closing down, change user, registration, etc., the first button shows an orange exclaimation mark and when selected the computer seems to make an attempt to download whatever it tries to download. However, it never downloads anything, and the rest of the exclaimation mark orange. How can I solve these two issues? I'm guessing that repair will set the other.
Hi doubleott
Method 1:You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to p Ed a SFC Scan -.
a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
b. type the following command and press ENTER:
sfc/scannow
A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
e. once the scan is finished, close the command prompt window, restart the computer and check.Check the link below for further guidance on scan SFC - mentioned
http://support.Microsoft.com/kb/929833Method 2:
You can try to reset the Windows Update components and check if that helps. Follow the link given below to do the same.
http://support.Microsoft.com/kb/971058I hope this helps.
-
When you try to run windows update on my win7 box family premium, I get the following message: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. »
Steps has been involved:
1. I restarted and even restored to the point when the last update was installed.
2. I verified that the service is running and checked that there are no errors in the the event log for this issue.
Any ideas?
PA bear,
I solved the problem, apparently, some of the dll files becomes involved in the process of updating Windows and just need to be reassocie but for the analysis patterns below are the answers to your questions:
1 Win 7 Home Premium installation
2 64 - bit OS
3 avast! Full version
4. no other anti-virus/anti-spyware has never been installed
5. computer was custom built by me, destructive disk used on a new HDD before installing it so that it wasn't a possibility of always being on the disc software.
6. I left on deployment (I'm in the army) and when I came back my wife told me that the PC was not able to download the updates since November of last year, so she switched off and left to me when I got home.
Thanks for the quick reply, I was just in the difficulty that I used while watching a few messages on another Web site.
-
Error message appears when I try to change the Windows 7 update to automotive preferences, or try to manually get updates of Windows 7. Using Win 7 Pro 64 bit on a computer at home. I am the administrator and I can't find any relevant information in help or in a search of the forum.
"Windows Update cannot currently check for updates because updates on this computer are controlled by your system administrator.
That's what I get for taking!
There is a big difference between be connected - one with administrative privileges (see your first post in this thread) and be logged on as administrator, especially in Vista & Win7. See the section "If you need help to determine if your account has administrative credentials...". "here: http://support.microsoft.com/kb/931712 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Original title: update Windows impossible currently to check updates because the service doesn't work (Vista 64)
I get the message: ' Windows Update cannot currently check for updates, because the service is not running. " You may have to restart your computer. "I rebooted without change.
I have Vista 64-bit with installed MSE and it cannot update its virus database. I have also Windows Media Center put up a TV and may not be able to download an updated Guide.
Can someone help me please? I just finished a full scan of Malwarebytes and a full scan of MSE - both in Mode safe mode with networking.
I found a few other forums similar to my problem, but I don't know that they are the same as mine. I'm a little wary about some of the suggested corrections, so I thought I would like to get suggestions directly related to my problem.
Thank you!
Hello
1. what exactly happens when you try to download the update for Windows Media Center guide? Do you get any error messages?
2 did you do changes on the computer before the show?
Method 1: Run the update utility
See the following site:
Problems with installing updates
http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-problems-with-installing-updates.
Method 2: Start services
Make sure that the following services are started:
a. Windows Update
b. Background Intelligent Transfer Service
c. Cryptographic Services
To do:
a. click Start, type services.mscwithout the quotes and press enter.
b. double-click the service and under Service status click Start, if it is not started.Method 3: Reset the update components
See the following site:
How to reset the Windows Update components?
http://support.microsoft.com/kb/971058.
Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry .
Method 4: Run the fixit
See the following site:
The problem with Microsoft Windows Update is not working
-
Windows Update cannot currently check the updates, because the service is not running
Whenever I try to update my windows vista with the recent service pack more computer, it tells me "Windows update cannot currently check for updates, because the service is not running." I'm running it from my admin account and I was curious to see if the same thing was happening with my other accounts. When I checked the they were fine and ready to go except the said that i needed approval admin even if I was giving him. I tried to turn admins accounts, but he wouldn't let me edit them, neither could I make a new account in general an admin or a fair standard.
Vista service pack 1
Processor: Intel (r) Core (TM) 2 CPU 4300 @1. 80 GHz
Memory: 2.00 GB
Norton 360 is my security system but did not install til about 2 weeks after a period of 1.5 years without protection (I was a fool, my computer had never seemed all operate differently) so I feel like this may be a virus any causing this problem cause, no idea on how do I fix? Thank you
Thank you Matt, what ive down to realize, it's I'll just do a pc reinstall (what does this DVD) I know itll mean the deletion of all but ive already backed up what I need/want to so ill be fine. Dell Web site gave me all the information I need on how to do it.
-
Im running windows vista 32-bit edition Home premium. I have not had my computer lately ive been let my sister use it. IM afraid that even if she was using it she got a virus because now I can't update windows, my microsoft security databases can not be updated either. Ive never had windows defender and essentials of security on that because I don't do much with this computer. Can someone help me understand if I need to reformat or if there is just a problem with my windows update?
The best approach for a very infected PC
is a 'Clean Install' you can never be 100% certain that every last bit of the infections have been removed.That said if you have time and want to see how you can go to eliminate viruses, malware and bots then read on.
Start by reading the following information of the Virus removal: (you must first install and run MalwareBytes)
Provided by: Malke - MS MVP:
http://www.elephantboycomputers.com/page2.html#Removing_MalwareFor me on a PC friends who had more than 60 infections and there is no CD of restoration and the key code has been lost, the article above "Malware Bytes", "AVG Free" and Norton NIS 2010 has been around.
NIS 2011 trial software:
http://www.Symantec.com/Norton/downloads/index.jsp(Note: the trial download Norton NIS requires a credit card, read the terms 'Opt Out' before you start)
In addition, a second pass using Malware Bytes and NIS seems to have removed all infections.AVG Free:
http://free.Avg.com/Avast:
http://www.avast.com/indexNever be afraid to ask. This forum has some of the best people in the world to help.
-
Restart does not help anything. What should do?
Start here:
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058If not post back with all the relevant information such as the Windows operating system that you use etc.
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395
Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
have tried to use windows update and get the following error message: Windows update cannot currently check the updates, because the service is not running. You may need to restart you computer. I rebooted several times. Any help would be greatly appreciated as I am not very computer
Original title: update windows
Solution 1:
Try this: http://helpdeskgeek.com/windows-7/cannot-run-windows-update-on-a-windows-7-pc/
Solution 2:
You can try to stop and restart the Windows Update Service (wuauserv). Open a command line window (run as administrator) and enter the following lines:
net stop wuauserv
regsvr32 %windir%\system32\wups2.dll
net start wuauservIf this does not help, try Microsoft Fix It service to reset your Windows Update components:
http://support.Microsoft.com/kb/971058/en-us
I hope this helps.
Maybe you are looking for
-
How can I highlight words in articles to review later when stored or transmitted?
I would like to highlight words or phrases of articles I'm reading to move or save, or do I have to register the first or offline reading to do this?
-
I met two problems after setting up my new Officejet 8620. I followed the instructions to connect the printer, use the phone cord supplied by HP. Repeated trials insist "FAIL" to "Correct Type of phone cord with Fax." I tried to reset hard a few tim
-
How can I index an element of the array as "index Board" function to labview?
Hello: I am looking for a method to search an array with indexes and return the element specified by the given index. as the array index of the labview function, but I can't find an exact symbol in teststand-table-operations/functions. I am new to te
-
Is there a program to make my hard drive HITACHI_DK23EA-30 run faster?
I do a virus on Microsoft Safety Scanner - 1.0.30001.0 scan. It has been almost twenty minutes and it's not even a 1/4.
-
Songs disappeared all of a sudden
Hi, I have this weird problem where the "rocket" froze on a song and all the songs in the internal memory stopped then appear in the drive or on the computer. I think the songs are still there but because he said 2321 free/3888 MB. I also had a video