Error Windows Update Code 52D

Similar Questions

• Error Windows Update 'Code 80070490.

  I get error message 80070490 whenever I try to check for updates. The only solution I found online is to put in my windows CD and press upgrade, which will reinstall all my files from OS and takes hours. There must be a better solution. Any suggestions?

  Windows Vista
  No network problem, have installed all updates until recently

  GAZA,.

  In order to correct the mistakes that SFC found, we need perform a reinstallation of Vista. Because you have only an OEM version of the Setup disk, we choose the custom option, which is a complete installation.

  See the following article for steps to reinstall Windows Vista.

  Back up your data before proceeding. Please see: methods to backup your files for more details on this.

  Always make sure that you have the means to reinstall your programs, either through a Setup disk or to have access to the installation files.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  Hi you can try the following...

  Click on Start >
  Type in CMD > 
  Right-click on the result, and then click on run as administrator >
  Then type sfc/scannow , and then press ENTER.
  Reboot your PC and try it a few times.

  Download and install the update tool of the system for Vista (Windows Update hotfix)

  • Updated preparation system tool for Windows Vista (KB947821) [February 2012] 32-bit
  • System Update tool for Windows Vista for x 64 based systems (KB947821) [February 2012] 64-bit
  "This tool is being offered because an inconsistency was found in the maintenance shop windows which can prevent the installation of future updates and service packs software."

  Microsoft technical support suggestions:

  Configure the connection to obtain an IP address automatically

  1. Click on «Start», enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  2. Right-click on the network connection, and then click "Properties". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click Select "IP Version 6 (TCP/IPv6)" and then click "Properties".
  4. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  5. Click on 'OK '.
  6. Click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  7. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  8. Click on 'OK '.
  9. Restart the computer.

  Other Solutions for error 8024402F

  You can view these articles the Microsoft KB to fix the problem:

  • You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  • Code error Windows Update 80244016, 8024402f, or c80003fa
  • or see this thread

• Vista - Windows Update - Code error 8024402F

  Hello world

  Desperately looking for advice on fixing my Windows Update; using Vista Home Premium, 64-bit. The problem has been consistent since about 10 days to have eliminated the possibility that it is related to the connection.  I completely many system restores.  I turned off Norton 360, even uninstalled and reinstalled.

  Have included a few lines in the Windows Update log this evening to see if this will help you to point me in the right direction.

  Thanks a lot for your help!

  Marla

  2011-05-01 13:32:14:336 464 1208 Misc Microsoft signed: Yes
  2011-05-01 13:32:14:336 464 1208 Setup Manager SelfUpdate unnecessary update: current version: 7.4.7600.226, required version: 7.4.7600.226
  2011-05-01 13:32:14:367 464 applicability of 1208 assess setup of the installation package ' ActiveX-SelfUpdate-WUClient ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.4.7600.226;
  2011-05-01 13:32:14:367 464 1208 Setup installation package "ActiveX-SelfUpdate-WUClient ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.4.7600.226" is already installed.
  2011-05-01 13:32:14:367 464 applicability of 1208 assess setup of the installation package ' WUClient-SelfUpdate-aux-TopLevel ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.4.7600.226.
  2011-05-01 13:32:14:414 464 1208 Setup installation package "WUClient-SelfUpdate-aux-TopLevel ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.4.7600.226" is already installed.
  2011-05-01 13:32:14:414 464 applicability of 1208 assess setup of the installation package ' WUClient-SelfUpdate-Core-TopLevel ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.4.7600.226;
  2011-05-01 13:32:14:492 464 1208 Setup installation package "WUClient-SelfUpdate-Core-TopLevel ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.4.7600.226" is already installed.
  2011-05-01 13:32:14:492 464 1208 SelfUpdate installation verification completed.  SelfUpdate is NOT necessary.
  2011-05-01 13:32:16:176 464 launched e70 again to THE client for directive 'Download progress', session id = 0 x 1
  2011-05-01 13:32:20:825 464 1208 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
  2011-05-01 13:32:20:841 464 1208 Misc Microsoft signed: Yes
  2011-05-01 13:32:20:856 464 1208 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
  2011-05-01 13:32:20:872 464 1208 Misc Microsoft signed: Yes
  2011-05-01 13:32:20:888 464 1208 PT +++ PT: Synchronizing server updates +++
  2011-05-01 13:32:20:888 464 1208 PT + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
  2011-05-01 13:32:29:140 464 1208 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f7
  2011-05-01 13:32:29:140 464 1208 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f7
  2011-05-01 13:32:29:140 464 1208 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f7
  2011-05-01 13:32:29:140 464 1208 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f7
  2011-05-01 13:32:29:156 464 1208 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f7
  2011-05-01 13:32:29:156 464 1208 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f7
  2011-05-01 13:32:29:171 464 1208 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f7
  2011-05-01 13:32:29:171 464 1208 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f7
  2011-05-01 13:32:29:171 464 1208 PT WARNING: ECP: cannot download the cab file of http://download.windowsupdate.com/msdownload/update/software/dflt/2011/04/4176362_519dd410d47fda0c8a08e1d00f4dd5e1632648bc.cab with error 0x801901f7
  2011-05-01 13:32:29:171 464 1208 PT WARNING: ECP: this trip contained some optimized updates failed. New number of update = 0, old Count = 15
  2011-05-01 464 1208 PT FATALE 13:32:29:171: ProcessCoreMetadata returned no updates to be posted
  2011-05-01 13:32:29:171 464 1208 PT WARNING: synchronization of updates: 0x8024402f
  2011-05-01 13:32:29:171 464 1208 PT WARNING: SyncServerUpdatesInternal failed: 0x8024402f
  2011-05-01 13:32:29:171 464 1208 Agent * WARNING: could not synchronize, error = 0x8024402F
  2011-05-01 13:32:29:639 464 1208 Agent * WARNING: exit code = 0x8024402F
  2011-05-01 13:32:29:639 464 1208 Agent *.
  2011-05-01 13:32:29:639 464 1208 Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
  2011-05-01 13:32:29:639 464 1208 Agent *.
  2011-05-01 13:32:29:639 464 1208 Agent WARNING: customer WU didn't search for the update with error 0x8024402f
  2011-05-01 13:32:29:655 464 cfc to THE > # RETURN # to THE: research updates [CallId = {3A043546-C6C6-4CD8-85E1-C729376760E8}]
  2011-05-01 13:32:29:655 464 cfc # warning: reminder of search failed, result = 0x8024402F
  2011-05-01 13:32:29:655 464 cfc # warning: could not find updates with error 8024402F code
  2011-05-01 13:32:29:655 464 cfc to THE #.
  2011-05-01 13:32:29:655 464 cfc # end # in THE: research updates [CallId = {3A043546-C6C6-4CD8-85E1-C729376760E8}]
  2011-05-01 13:32:29:655 464 cfc to THE #.
  2011-05-01 13:32:29:655 464 cfc to THE need to show undetectable notification
  2011-05-01 13:32:29:655 464 cfc put to THE to THE next detection timeout to 2011-05-02 00:32:29
  2011-05-01 13:32:29:655 464 cfc to THE adjustment to THE planned phase of installation to 2011-05-02 09:00
  2011-05-01 13:32:29:858 464 1204 putting featured update notifications.  fIncludeDismissed = true
  2011-05-01 13:32:29:858 464 1204 to star no. updates available.
  2011-05-01 13:32:34:647 464 1208 report REPORT EVENT: {4CEAD57A-CF72-4270-B0D9-B4EB0658EAAF} 2011-05-01 13:32:29:639 - 0600 1 148 101 {00000000-0000-0000-0000-000000000000} 0 software AutomaticUpdates failure 8024402f from Windows Update Client sync did not detect with error 0x8024402f.
  2011-05-01 13:32:34:678 464 1208 report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2011-05-01 13:32:34:678 464 1208 WER sent report: 7.4.7600.226 0x8024402f 00000000-0000-0000-0000-000000000000 Scan 101 unmanaged
  2011-05-01 13:32:34:678 464 1208 report CWERReporter finish event management. (00000000)

  Hello

  I suggest you follow the link to the below error code.

  Code error Windows Update 80244016, 8024402f, or c80003fa

• When I try to update windows I get this error «Windows Update error 80072efe»

  Hello

  I installed 2 days ago to my new PC windows 7. After the installation is complete, I tried to update windows for the first time and every time I get this error: «Windows Update error 80072efe» I google the error and I saw that a lot of people have the same problem. Most of them had their infected PC but mine is brand new and I don't know what to do.

  Hello
   
   
  I found some articles that should help you solve thi sissue.
  Try the methods listed in the articles below and check.
  
  1 Windows Update error 80072efe or 80072f76
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072efe-or-80072f76
  
  2. you may experience temporary errors related to connection when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error Windows Update Database that can be 0 x 80070490

  Original title:

  Update of Windows, Java and some problems

  Hello

  My Java and Windows 8 will not get automatically updated.  When I go to all the work this symbol [[[comes in. I have updated Java, nevertheless a message shows to update when I put a cursor over any word of an open page of the internet. I have troubleshooted illustrated message"

  Error Windows Update Database that can be 0 x 80070490

  Miniport Wan (Network Monitor) # 2 has a driver problem

  Windows Update configured to never install drivers '  

  Some keys on the keyboard do not work.  How can I fix these problems?

  Hello Arif,

  Thanks for posting your query on Microsoft Community forum.

  If you receive Windows Update error 80070490, it means that a file (CBS Manifest) that is needed to install updates is corrupt.

  Try it out below mentioned methods and see if it helps.

  Method 1

  Try to follow the steps mentioned in the article below.

  Windows Update, error 0 x 80070490

  Method 2

  Try to run the Troubleshooting Windows Update tool.

  This utility is used to and check if the network card and Windows Update services are running properly.

  Problems with installing updates

  Try other steps mentioned in this article if the issue that you are facing is mentioned in one of the mentioned option it.

  Method 3

  If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Windows update code error 80244018

  I received this error code trying to download a windows update (kb955430).  I was able to download and install all my downloads except this one successfully.

  Hello

  Thank you for using answers.microsoft.com

  Here is the solution.

  > Press the WIN + R on the keyboard to open the command run.

  > In her RUN, type services.msc and click OK.

  > Make sure that automatic updates is set to automatic and

  > Background Intelligent Transfer Service is set to automatic.

  Also, follow these steps.

  > Use the proxycfg command-d to get my Windows Update work
  correctly.

  > Cleare IE cache and history together all the IE zones by default
  values.
  > Disable firewalls

  That should solve the problem.

  Thank you.

  UDAY $012 please let me know if the solution worked or not I can improve, I thank you and appreciate your feedback, because it's the only one I can see I can improve.

• Windows Update code, error 8007007E

  I get a warning on my computer tells me that Windows cannot check the updates automatically. So I run windows update and it says that an error has occurred during the new updates for my computer. Then he said: code 8007007E windows has encountered an unknown error and.  Apparently because I bought my computer in February it has never been updated. I know this is a problem and I don't want my computer at risk. Help, please. I tried the troubleshooting, and it gives no help. I'm going crazy trying to figure it out.  I only am not computer savvy enough to keep the simple answers please :)

  Right-click on my computer and select properties: Windows version which is displayed on the general tab that results (for example, Windows Vista Ultimate Service Pack 2;) Windows 7 Ultimate 64-bit)?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  How to reset the Windows Update components?
  [Skip the section to APPLY to; run the difficulty in default and aggressive mode]
  http://support.Microsoft.com/kb/971058

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update Code 800706BE error

  Windows Update does not list the updates it needs.  She returns an error code 800706BE - Windows Update encountered an unknown error.

  Also, I constantly get pop - ups that say 'Windows Modules Installer has stopped working".

  I tried to install a stand alone Windows Update Agent and get the error "fatal error" when installing.

  Help!  Any suggestions?

  I had a problem with the installation of Office 2010 by hanging up.  I right click on computer, then selected to manage services and stop the print spooler service.  Installation ended quickly after that.  I met the same problem with office 2010 SP1 update.  Again, I've had to stop the print spooler service and installed ok.  Not really sure why except that they are arguing the CPU resources (CPU meter gadget has been set during installation has failed).

• Windows update code error B56

  Please notify. Problems with updates from a few days ago. Updates, says windows encountered problems and gives the B56 error code. Latest updates were today for KB915597, update windows for windows defender. I'm running windows vista home Basic, service pack 2, 32-bit version. My ISP provides my safety - PC guard and I am currently on their total package. I also defragment and scans scheduled to run every morning at 01:00. I searched on the net but can't find B56. I checked my memory, and it says I have free on my disk C to 70% and 90% free on my disk S.

  Hello

  What is the code exact error you get?

  Temporarily disable all security software and check if it helps.

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus
  software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet
  or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Also check the updates failed and see if there are error messages in Windows Update.

  1. open Windows Update.
  2. click view update history.

  You can also try to download and install the updates manually.

  Make sure that the following services are started:

  ·    Background Intelligent Transfer Service
  ·    Cryptographic services
  ·     Windows Update

  Follow these steps:

  1. go to start and type services.msc and press to enter.
  2. from the list of services, search for the above mentioned services and see if they are started and set to automatic.
  3. If they are arrested, then right-click on the service and select start to start the service.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows update code error 57F

  Every time I try to run windows update I have an error code of 57F

  Tip: Insert your Office CD in the Bay before the next attempt to install appropriate.

  Tip: If no joy, see if you can download the "fullfile" version updates via http://www.microsoft.com/downloads/ or http://catalog.update.microsoft.com/ and then manually install / them.

  ======================================

  Known issues that may occur when you install Office 2007 SP2...
  http://support.Microsoft.com/kb/968173

  You receive an error message when you try to apply service packs for Office 2007 on a computer that is running WinXP SP2 or SP3]
  http://support.Microsoft.com/kb/942101

  ======================

  Office 2003...

  Description of the update for Office 2003 (December 9, 2008)
  http://support.Microsoft.com/kb/949074

  You can not install a service pack for Office 2003
  http://support.Microsoft.com/kb/884298

• Windows update code error 0x80072efe

  I get a wandered code 0x80072efe how can it be fixed it crashes my computer each time that
  * original title - I get one wandered code 0x80072efe how can it be fixed it crashes my computer every time *.

  • • • A rootkit has been known to cause this problem.

        (Rootkit removal tool)
        http://support.Kaspersky.com/viruses/solutions?QID=208280684

        TDSSKiller

        In addition, suggest that you scan your computer with MalwareBytes' to remove all traces that may still be present.

        MalwareBytes Anti-Malware (MBAM)
        http://www.Malwarebytes.com/>

        The free version of MBAM is a scanner at the request and offer no protection "real time". Keep and use it as "second opinion" scan.

        You may experience some temporary connection errors when you use Windows Update or Microsoft Update to install updates http://support.microsoft.com/kb/836941>

        By running the Fixit on this page, you can reset the Windows Update components. But if there is malware present, she will continue to reset the connection to the update servers:

        How to reset of the components of Windows Update http://support.microsoft.com/kb/971058>

        Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

        How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7 http://support.microsoft.com/kb/929135>

        Once the Fixit has been downloaded and the system is started in the pure State, check that the native Vista firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Error 80072EFE (during Windows Update) code

  Windows Vista is not up-to-date, all I get is "Windows could not search for new updates" and the error code is, 80072EFE with the following clarification:

  Windows Update has encountered an unknown error.

  But when I followed with a link to a solution there is nothing, no solution or details. My internet connection works well, and I have Microsoft in my trusted SITES, so there is no connection problem.

  I have Windows Vista Home Premium SP2, and the last update that my computer could not do was on 19/05/2010 (KB905866). Just in case there is nothing to do with this issue.

  Please help, don't know what else to do...

  See:

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  TaurArian [MVP] 2005-2011 - Update Services

• Code error Windows Update 8024607 and 80070490

  Updates to security, kb967723, 970430, and 972145 failed to load. I tried the suggested fixes and nothing works suggestions so far?

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If the above does not solve it:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Windows update code error 646 (KB976414, KB977304)

  Windows update 646 (KB976414, KB977304) failed error code

  See: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/267bbf1c-0390-4034-aab1-45f4a4c4559a/ TaurArian [MVP] 2005-2010-implementation to date of Services