Error with KbdStub.exe, monitor erased on Vista
* original title - Kbd Stud has stopped working... this message every day... my monitor white, except for the icons at the bottom of the screen. *
Signature of the problem:
Problem event name: APPCRASH
Application name: KbdStub.exe
Application version: 1.0.9.1
Application timestamp: 4884f1e6
Fault Module name: C:\Windows\system32\mscoree.dll
Fault Module Version: 6.0.6002.18005
Timestamp of Module error: 49e0421d
Exception code: c0000135
Exception offset: 00000000000b8fb8
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information 1: fa3e
More information 2: ac0507478d1c5bd693cfc4fe3987e900
Additional information 3: fa3e
Additional information 4: ac0507478d1c5bd693cfc4fe3987e900
Hi Don,
Please see the following diagnosis:
Start the computer in safe mode and then run boot error may be related to a program. After the clean boot, we can find the program at the origin of the problem.
Start the computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Clean boot
http://support.Microsoft.com/kb/929135
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Tags: Windows
Similar Questions
-
KB2508272, 2117917, 2505189, & 2562937 any error with 8007371B in a clean boot (Vista Home 64 bit)
I even do the Reset to update and run each update above one at a time.
Results of the SFC
2011-09-29 17:52:21, info CSI 00000006 [SR] components check 20 (0 x 0000000000000014)
2011-09-29 17:52:21, transaction Info CSI 00000007 [SR] beginning verify and repair
2011-09-29 17:52:22, info CSI 00000009 [SR] verification complete
2011-09-29 17:52:22, CSI of information 0000000 [SR] repair 0 components
2011-09-29 17:52:22, CSI Info 0000000b transaction [SR] beginning verify and repair
2011-09-29 17:52:22, CSI to 0000000 d [SR] repair information completeHi Ed - Bob,
When you have used the system update readiness tool that makes the journal file state? If there are errors, you can use this article to resolve the problem. http://TechNet.Microsoft.com/en-us/library/ee619779 (WS.10) .aspx
-
Fix a SFC reported an error with WmiPrvSE.exe
At first, I lived an extremely slow response with Vista Ultimate. Sometimes the locks system for a few minutes. THS drive activity light was lit.
After watching the activity in the PERFORMANCE Monitor, I disabled the Indexing Service and the SuperFetch service. The system works a lot better now. I would like to reuse these services, but that's a topic for another question.
I ran SFC/scannow, and he noted several uncorrrectable errors affect all program WmiPrvSE. Here's just one of the errors.
2010-01-20 16:03:47, CSI Info 0000018f transaction [SR] beginning verify and repair
2010-01-20 16:03:51, info CSI 00000190 [SR] cannot repair the military record [l:24 {12}] "WmiPrvSE.exe" Microsoft-Windows-WMI-Core-ProviderHost, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, impossible to verify files "
2010-01-20 16:03:57, info CSI 00000191 [SR] cannot repair the military record [l:24 {12}] "WmiPrvSE.exe" Microsoft-Windows-WMI-Core-ProviderHost, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, impossible to verify files "
2010-01-20 16:03:57, info CSI 00000192 [SR] this element is referenced by [l:160 {80}] "" Package_25_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 113_neutral_GDR ""
2010-01-20 16:03:57, info CSI 00000194 [SR] verification completeHow can I fix this error?
Thank you
Hello
Run Checkdisk then run the SFC/scannow again and see if you actually get the same error.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
If necessary:
If you can uninstall SP2 back to SP1 - SP1 or to return to standard Vista. You can go ahead
Back to MS, you were at the same time, it is fixed.Try an InPlace upgrade.
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation.
You can use another DVD (same 32/64 bit) because they are not protected, but you will need to copy you have the product key.
On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
4510 error with freeridegames.exe
freeridegames.exeRemember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hey there Malc Sav.
I am a customer with Free Ride Games duty counsel and I'd be more that happy to help you to fix this "4510" error you encounter.4510 generally means that the installation files you downloaded has become corrupt and fail to install. The first thing we need to do is to delete these files so that you can download and install the games. To do this, follow these steps:1. exit the installer of Free Ride Games (to do this you can press CTRL - ALT - DEL to access your task manager, go to the "processes" tab and put an end to the process of "Free Ride Games.exe")2 remove the installation of your temporary directory files. You can access this directory by pressing the WINDOWS KEY + R at the same time to open the "run" command3. in the "Run" command window type %temp% , and then press ENTER.4. delete the folder "SDM143".5. now that you have removed the installation files, you can download a new copy of our game HERE player6. run the installation file and enjoy the games on our site!If you have additional problems that I invite you to visit the knowledge base of Free Ride Games located HERE. It has the answers to our questions and the most common mistakes! -
Error with TrustedInstaller.exe
Name of the failing application: TrustedInstaller.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc4b0
Name of the failed module: cmiv2.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdec9
Exception code: 0xc0000005
Offset: 0x00000000000cec0e
ID of the process failed: 0 x 3834
Start time of application vulnerabilities: 0x01cb885ad24d6c24
The failing application path: C:\Windows\servicing\TrustedInstaller.exe
Path of the failing module: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7600.16385_none_655452efe0fb810b\cmiv2.dll
Report ID: 10238849-f44e-11df-872a-005056c00008Bucket of error, type 0
Event name: APPCRASH
Answer: No available
Cabin ID: 0Signature of the problem:
P1: TrustedInstaller.exe
P2: 6.1.7600.16385
P3: 4a5bc4b0
P4: cmiv2.dll
P5: 6.1.7600.16385
P6: 4a5bdec9
P7: c0000005
P8: 00000000000cec0e
P9:
P10:Attached files:
These files are available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_TrustedInstaller_2885402e7d38c2ca57a1f461e2eeef25561322e7_8b738057Symbol of the analysis:
Recheck for solution: 0
Report ID: 10238849-f44e-11df-872a-005056c00008
Display state: 4Above is almost continuous, running every few minutes, and I do not think that Windows update is running as I had no updates since installation.
Windows 7 64-bit enabled.
Please report all follow-up answers to your new thread to avoid confusion: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/d3f3fc1c-68ce-4c53-84d9-4f4a4793c478 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
'Incorrect function' error with my backup (I have Windows Vista)
I have a problem filling my back up. Even if it is scheduled every week the last completed upward was in 2008. When I did this time it gave me the message:
Incorrect function (0 x 80070001)What does that mean?
Thank you!Hello
1. you are using ' backup and restore the Center "or any other program to save the files?
2. who is the edition of Windows Vista installed on the computer?
This problem occurs when you click on a complete PC Backup in the backup Center dialog box and restore and then you click on create a backup now.
To resolve this issue, follow these steps:
1. start disk management. To do this, click Start, type diskmgmt.msc in the search box, and then click diskmgmt.msc in the list programs.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2 right-click the primary partition that you want to enable, and then click Mark Partition as Active.
Exit disk management.
3. restart the computer by using the Windows Vista DVD. Press any key to start the computer using DVD.
4 set your preferred language and then click Next.
Note: In most cases, the repair process starts automatically, and the System Recovery Options menu is not displayed.
5. click on repair your computer.
6. in the System Recovery Options dialog box, click the operating system you want to repair, and then click Next.
7. in the System Recovery Options menu, click Startup Repair to start the repair process.
8. when the repair process is complete, click Finish.
9 restart the computer by using the hard disk.
10. connect to the computer as an administrator and then try to perform the backup operation.
For more information, see this link: http://support.microsoft.com/kb/950167
I hope this helps.
Kind regards
Syed
Answers from Microsoft supports the engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
original title: error with ehshell.exe
I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe. Could you help me?
This problem exists since the 1st Media Center. SP2 and SP3 had a difficulty, but it is obvious that it doesn't always. The same problem still exists in Vista today with a lot of other carried over from XP. System restore would work, but you do not have any good restore points so reinstall an operating system seems to be your only option.
You probably don't want to do an OS reinstall you need for Media Center, but since it does not at all, you might want to play then remove the Media Center updates and or SP3 and reinstall them.
-
I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
I am currently using Windows vista. I face a problem that I can't remove all the files in the form of MPEG-4. And the error with code 0x800704C8. What should I do so that I can delete these files? Please kindly help me to solve this problem. Thank you.
original title: Code 0x800704C8...Hello
Did you change your computer?
Method 1:
Step 1:
I suggest you follow the link and check.
What are the permissions?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions
Step 2;
Why can't I delete a file or a folder?
http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder
Diagnose and repair Windows files and folders problems automatically
http://support.Microsoft.com/mats/windows_file_and_folder_diag/
Method 2:
I suggest to download and install the Microsoft safety scanner and run the scan and check.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate
-
IM have trouble with userinit.exe, there a like (0 x 0000000005) of the error, and I don't see anything in the screen is all black, what I have to do?
I would also like to run a file system check to verify and repair the operating system files
Run a file system check to check and repair your system files.
To do what type cmd in start search box, and then right-click to run as administrator, then
SFC/SCANNOWIt may need be performed up to three times before success
Let us know the results of the report at the endRead here for more information
http://support.Microsoft.com/kb/929833 -
When I go into the control panel to change my settings for the mouse, I get the error "windows rundll.exe host has stopped working", therefore, you cannot change the mouse settings, how do I fix it? My mouse is out of control! :)
* original title - why windows will not host rundll.exe I would change my settings of the mouse? *
Hello
If you use 3rd party mouse drivers updated or reinstall those who, like Logitech, Microsoft
Wireless and so on.=================================================================
To solve the problems:
If your: Windows host process Rundll32 has stopped working
http://www.WinVistaClub.com/T40.htmlWhat is rundll32.exe and why it works?
http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/What is the suspicious Rundll32.exe process?
http://WindowsXP.MVPs.org/Rundll32.htm-----------------------------------------------------
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------
If no joy trying to determine what is the cause:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything - then right
Click on taskbar - task manager - take a look at stored by - Services - process -.
It's a quick reference (if you have a small box left - show for all users, then
Check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see who are loading is method 2 - using MSCONFIG then after a
a list of these here.
--------------------------------------------------------------------Tools that should help you:
Objects of process Explorer - free - find out what files, registry keys and other processes
have open, which DLLs they have loaded and more. This exceptionally effective utility will be
even show you who owns each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured so that it starts automatically when your
system boots and you log in. Autoruns is also the full list of registry and files
locations where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity
in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded
automatically when Windows starts. For each request, the following information
appears: product Type of startup (registry/Startup folder), Command - Line String,
Name, file Version, company name, location in the registry or the file system and more.
It allows you to easily disable or remove unwanted programs that run in your Windows
startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not.
The window Watcher says it all, every window created by all programs that are running, the statement
If the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/Hope these helps.
-
Satellite X 200 - 25 G: problem of Flash Cards - Run time error file TCrdMain.exe
Hello world!
I don't know how, but I have a problem when my windows Vista from (running)
The problem is with these file TCrdMain.exe this file is for Flash cards, end running every time when I put my PC on (with windows startup). But I see this problem: "Run time error file TCrdMain.exe ' and I should click Close.
I don't know where can I uninstall this program and when I find that driver (Software) (if I uninstall and then install this driver, maybe that everything will be OK). This is the main problem.And another question...
There are so many programs with this computer (laptop), and if I want to install Windows XP for example, where can I find everything (each programs) there may be 10 or 15 pograms.It will be a big problem if I change my OS. Y at - there a site where I can download, everything...
Thanks for the replies, nd sorry about my English :-) skills
Best wishes from the Bulgaria and have a nice day!Post edited by: me
null
Hello
I'm not very well why the executable Run TCrdMain.exe error, but it is certainly up to Toshiba FlashCard software and the FlashCard belongs to the package Toshiba Vista added value m.
Kody is good. Reinstall the VAP and check if this helps solve this problem.
With regard to the question of the other;
You are right; the notebooks are preinstalled with many different applications. But it is necessary because the laptop supports many different features.
However, if you want to install XP OS on the X 200 PSPB9E series, you will need drivers Toshiba XP and all need Toshiba XP drivers are available on the European driver Toshiba pageYou must install all the drivers available if you want to use all the features of the laptop.
Concerning
-
error message ntoskrnl.exe
Hello, I am running Windows Vista. To restart pc after updating I got an error message saying the ntoskrnl.exe is missing or damaged and should be replaced. Status: 0xc0000098 I tried to re install with disk but cannot get past the splash screen. Help!
Thank you
See thread below the link for additional troubleshooting tips by jcgriff2.
-
problems with connecting business valueapps in Windows Vista
Have rec'd error Windows indicating that logic ValueApps has stopped working:
Problem event name: APPCRASH
Application name: ValueApps.exe
Application version: 1.4.03
Fault Module name: ValueApps.exe
There was an automatic update 27/01/14 and, once again, 12/03/14. I have Windows Vista (64) and have problems of interface with many business websites (online payments, for example) which I have never experienced before.
Another file is TBverifier.dll; However, that one has not changed since 08/25/13 and don't seem to be a problem.
What can I do to fix this? Looks like this are updates of Conduit, Inc.
Threads merged, but not deleted because it contains additional information about the problem of duplicate
Hello
Read this: http://www.shouldiremoveit.com/ValueApps-78723-program.aspx
Led load Malware.
Search for malware, if necessary using the safe mode with networking.
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Once in Safe Mode with network, download and run RKill.
RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.
http://www.bleepingcomputer.com/download/rkill/
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And also scan with the free version of SUPERAntiSpyware
http://www.SUPERAntiSpyware.com/download.html
SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.
SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
THS is a very good program to scan your system to remove adware, etc.:
http://www.bleepingcomputer.com/download/adwcleaner/
AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer. Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And just to be sure, nothing is lurking in the background:
'TDSSKiller Rootkit Removal Utility download for free'
http://USA.Kaspersky.com/downloads/TDSSKiller
See you soon.
-
Download error - cannot download anything on the windows vista computer.
When I try to download anything, it says that Windows cannot find 'C:\Users\Admin\Downloads\shockwave_Installer_Slim.exe '. Then he said, make sure you typed the name correctly and then try again. I hope you can help me.
Original title: download error
Hello
Thanks for posting your query in the Microsoft Community Forums.
It seems that you have problems with downloading files on the windows vista computer.
The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would appreciate if you can help me with the following information.
1. what browser you use on the computer?
2. What is the exact full error message?
3. don't you make changes on the computer before this problem?
4. deal with this problem if you try to download all files from online?
If you do this in the face of Internet Explorer help, I suggest that you should change the default download location and check if it helps.
Method 1
In internet explorer, you can change the default location.
Here's how:
a. open internet explorer.
b. click on Tools , then select view downloads.
c. downloads for window, click Options.
d. now, enter the default download location and click on the OK button.
Turn on the computer at the beginning of boot and check if the problem persists.
Method 2
Perform a clean boot to see if no third-party service is causing the problem.
To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
http://support.Microsoft.com/kb/929135
Note: follow step 3 to reset the computer to start as usual after the boot process.
For your reference:
Windows Internet Explorer 9 Download Manager using
http://Windows.Microsoft.com/en-in/Windows-Vista/using-download-manager-in-Internet-Explorer
Response with more information to help you.
Let us know if you encounter problems under windows in the future. We will be happy to help you.
Maybe you are looking for
-
With Firefox loaded, but sitting idle for a period, he began to use 50% + CPU (by Windows Task Manager). This slows down everything even if nothing happens (openly) with Firefox. If I close and reopen, it's OK for a while, and then it starts again. =
-
Update of a Keynote presentation loops live.
We meet fundraising and want to update the total amount announced as on a loop (continuous play) Keynote presentation no idea how we can do this?
-
Corrupt upgrades and their blocking effects
I recently had someone treats a number of improvements uninstalled for me which some were corrupt. It seems that I'm now the same problem again. How can I identify which updates are corrupted / blocking installation of other upgrades and how to chang
-
Cannot download scan of computer Applications
I've used the scanner on my V715w repeatedly, but today I can't. When I choose my computer Inspiron 620 Win 7 to send the scan, it is back with the message that it cannot retrieve the list of scanning of the computer applications. I unplugged the pri
-
Error code stand-alone Installer
Recently installed Windows 7 Proffesional as a clean install, Windows update has failed then ran Installer standalone and got the 0x802400e error code. Having a 64 bit version of Windows 7 and PC has less than 12 months. Have not been able to find an