Error with product recovery. Now, does not start. Satellite Pro A40

Similar Questions

• MacBookPro6, 2 batteries ran down to 2 mos now does not start

  15 "2011 MBP 6.2 running 10.11.3 remained out of order, disconnected for about 2 months. The battery after plugging and shows 5 lights. The MBP now does not start - no edge no screen no effects nothing.

  I have reset the SMC, took out the battery and successor, removed or put around the bars of memory without any effect.

  A bad battery will keep it to start when it is plugged? Is there anything else I should try?

  TIA,

  Bill

  What happens if you leave the battery or disconnected and try to start the machine?

  It happened sometimes with macbook air which complete draining the battery damaged map logical.

  A defective battery should not influence your machine when you hooked it up.

  I recommend you to wear to a bar of genius of apple for validation.

  See you soon!

• There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.

  There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.
  I tried to connect my xbox to my computer to xbox live via the 3g router, but I was unable to. According to me, there is something wrong with the network card, since neither the wifi (wlan?) nor the lan connection seem to work.
  I harnessed connected my iPod, Xbox 360 and Nintendo DS for her, but not my computer. Please help me, what wrong with my computer?

  original title: problem with the map?

  Hi GustavTak,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?

  Try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

• error 0xC0000225, recovery partition does not start

  Hello

  I have a HP dv7 with Windows 7 Home premium 64-bit.

  A few months ago, I did a factory restore, the recovery partition start (I have no recovery disks). After that, I thought to divide my C: partition where Windows is installed, and I did it with Windows disk management.

  So my new scores were: C: D: with recovery, OS, E: HP_Tools and g.: the new partition.

  A few days ago the sistem ran very hard, so I thought I do another factory restore from the recovery partition. When I rebooted and you press F11, I got the "0xc0000225 error".

  I have a Windows 7 Home Premium 64-bit bootable drive and I tried Startup Repair tool and other repairs of sistem, checks HDD, but everything seems to be ok.

  I reinstalled the operating system, from the disk bootable on C: (OS starts and works well) and let the other partitions as they were... but it seems that the recovery partition still does not start if I can do a restore from the factory with all the drivers and utilities, as they were at the beginning.

  Any ideas on how I can do?

  Thank you!

  It seemed that it there was not much I could do about this problem. My disk is dynamic, there is no Recovery Manager from the Start Menu, there has not been any creation of HP with HP folder recovery support. I managed somehow to make a repair disk, I tried it but no results, the error kept popping out every time.

  I inserted the Windows 7 disc to try to delete all partitions, including the recovery and HP-tools and do a Windows Installer Cleanup, but the Format, New and Delete buttons are inactive.

  I did some scans disk and memory tests, everything was ok... I started with a disc of Hiren and accesed the HARD drive with a program based on linux and so I managed to delete the partitions.

  After I installed a new copy of Windows 7 to work with my SN and everything was ok. Unfortunately I lost partitions recovery and HP-tools, but at least it works well again.

  Thanks for your all your support.

• Recovery disk does not start

  I'm helping a friend with his HP CP61-313US laptop. Somehow, it's not boot from the hard drive. It attempts to load Windows, then crashes, gives me the black screen where you can choose the safe mode, safer networking, etc.

  He will not start in safe mode or other options. It does not start from the last good configuration.

  I ordered the HP recovery discs and disc inserted one of the stimulus. It won't boot from the CD. I went into the bios options and set the CD drive as the first option. I did both of in the settings BIOS F10 and F9 startup command settings. I hear work the CD player, but he keeps trying to boot from the hard drive.

  I never get a message that says something like "press any key to boot from the CD-ROM."

  Is there anything else I can do to force startup from the CD/DVD?

  Is it possible that I can copy this HP on a flash drive recovery myself and try to boot from a flash drive. I guess it is possible that the DVD/CD player is broken. My friend who owns the computer used rarely to the reader.

  Is there some other bios setting I can use? Either by the way, I ran the memory and hard drive diagnostics and they passed.

  I have determined that the DVD drive on this laptop is bad or is about to fail. I tried to create a Windows repair CD and was able to read the CD. It would give me the message "Press any key to boot from CD or DVD" that I was not getting with restore disks factory HP. I put restore HP factory disks in another computer and tried to copy them. I thought that, perhaps, if my drive was any failure there is something on the factory records it would not read but maybe a freshly burnt disc copy can read. It would be almost from the start. He would try and then getting errors of e/s on the copied version of the disc. I came to the conclusion that I could find other uses for a drive DVD external USB and since they were only $40 I have advanced and bought a. I now restore since the original HP recovery discs successfully using the external DV

  Key USB D. I had to upgrade the bios to boot from the DVD USB drive, but it seems to work. So you can consider my original request as 'resolved', but I can't speak for other users who have hung on this thread. But if someone has trouble with their discs original HP, I would suggest trying to make a copy of their, and maybe a copy will work. The copy almost worked for me.

• DVD - ROM Toshiba Recovery disk does not start

  Hello

  I'm having some problems with my Toshiba Satellite M40, and I decided to reinstall the OS with the recovery of the dvd disk, but the disk does not start.
  When I'm on windows, the cd/dvd driver works perfectly, and I don't think that the recovery of the dvd disk are damaged.
  I have already tried:
  1. by pressing the "C" key to start the computer
  2 - press "F12".
  3 - Enter the BIOS Setup and select cd-rom to start first

  But the computer starts up normally and no error message appears

  Can someone help me? I don't know what to do

  Thank you

  Hello Palma

  Can you please test it with some other bootable CD or DVD? It will be interesting to know if this happens with the recovery media only or even with other bootable media.

• Recovery CD does not start

  Hello

  I have an old IBM ThinkPad R50e (1834-PTG). When I originally bought in 2003, I created a set of recovery 6 CDs I kept this set in a place course and decided today to recover the laptop factory settings. The problem is that the computer won't start any recovery of 6 CDs (does not start other CD bootable without problem). CDs are not empty and contains a directory named "RECOVERY" with a bunch of files that it contains.

  I tried to use specify the CD-ROM drive as first boot device, to use F12 to specify the device, nothing helps.

  How can I use these CD?

  I found a ghost image, which is the result of a whole new R51. I'll be able to use it to recover my system? Will be the key of Windows that came with my computer work with this image?

  Well, it turns out that there was another drive (surprise) the names "Recovery boot CD. Now, the recovery process begins without any problem.

• Vista will not load and continually reboots, recovery disk does not start.

  I have a Dell with vista on it. Recently, it has automatically installed an update and now it does not load Windows at all. It goes to the screen where I have the opportunity to "start in safe mode" "safe mode with command promt", "last known good configuration" etc. and none of these work options (all start loading them upwards and then the computer restarts just itself).

  I tried to put in the cd of installation for vista, but it won't start. I changed the options in the BIOS so that it starts from the CD first, but then it just goes to another blue screen that says: there was some sort of system faliure, and the only option is to restart the computer.

  I also tried to connect an external dvd player to see if he was not playing the disc because of a defect in material, but the same thing happens.

  I also tried out the RAM and it put it back again (a single website suggested I try this).

  Nothing seems to work! And now, I am out of options and have no idea what to try next - help!

  http://support.Dell.com/

  If it does not start where install Recovery DVD from Dell, you will need to contact Dell at the above address.
  As you say, you have changed the boot on the appropriate drive order and still nothing

  It would seem that you have a deeper problem that just a straight reinstall the problem.

  See you soon. Mick Murphy - Microsoft partner

• Syntax error (vmx-line 146) - VM does not start!

  Hi all

  I just installed the updated Mac OS security and after that I turned on the printer on the Fusion side Mac OS fixed. Now VMware does not start, and I get the following message

  File "/ users/Pedram/Documents/Virtual Machines.localized / 2.vmwarevm/Windows Vista 2.vmx Vista Windows" line 146: syntax error.

  It seems that the .vmx file is corrupted, as it has just 146 lines.

  I use a software that only runs on a PC and I have all my data stored on the windows side.  It is essential that I have access data, please help me.   I worked on this project for a 1 month and losing the data is equivalent to losing my job.

  Any help will be greatly appreciated. Thank you

  Try the attachment. Note that the .vmx file has been truncated in the Middle the AutoProtect settings, so I got rid of all of them - you should reactivate the merge user interface.

  Alternatively, if you could get vmware*.log for the virtual machine, we could try to rebuild the original .vmx file (there may be more pieces of interest who got truncated).

  Also note that if you use the Fusion 2.x, you can access the virtual OS x disk when the virtual machine is not running. CTRL-click on the VM and choose open with > VMDKMounter.

• Created recovery disc is ok, but does not start Satellite A300

  Hello
  as the title suggests, the disks fail to start, details below formatted for reading easier (I hope :))

  -All-new series Toshiba A300
  -J' have created a disk of restoration with the toshiba utility, there was no error, the files are there but the drive seems to be unbootable.
  -This happens with both attempts, I made, using Verbatim r and Sony + R media.
  -The recovery disks will NOT start on my desktop system either.
  -L' laptop starts fine with a couple of distributions Linux on CD - R.
  -J' use F12 to tell the laptop to boot from the DVD.
  -J' have much experience dealing with the LiveCD, bootable disc burning, etc., so I'm inclined to think there is a problem with the toshiba utility.

  Any help will be much appreciated. Thanks in advance.

  Hello

  There is certainly nothing wrong with the Toshiba Recovery Disk Creator.
  I burned the recovery disc too. Once it failed because I did not use fully compatible DVD. Then I tested it with TDK - R and everything went well.
  No errors, nothing. Finally, I booted from the DVD and could reinstall the OS too.

  I presume that you should check the other DVD.

  Good bye

• Satellite T130-11u with Intel CPU Q300 does not start

  Hello

  I installed a Q300 240 G in my T130 LU.
  It does not start.

  I tried to use the restore disks, everything went well.
  But it's boot after that... it's LAN check while the boot device is set to Q300.

  I tried with a Windows disc.
  It says that the disk is locked and I need to unlock it. (Messages are in French).

  I forgot something?

  Concerning

  Jean-Luc

  Automatic response...

  I managed to get to start.

  I had to put:
  "Exectute-disable bit capability" to [Disabled]
  "Control" mode SATA [compatibility]

  After that, I managed to install the system and start (most important) it.

  Once the system was working, I have reset these entries to the normal configuration without any adverse effect.

  Concerning

  Jean-Luc

• Windows Live Movie Maker, used to work, but now does not start

  2 months ago, I used windows live movie director very well. now, I get a message that it does not start and to check my system requirements...  I loaded all updates, check the driver, uninstalled and reinstalled, still does not, any suggestions?

  Have you tried the fix program option in uninstall a program from the control panel.

  Photo Gallery work under voltage is windows? If not,

  Windows Live Photo Gallery is not responding or does not start,

  http://support.Microsoft.com/kb/944221/en-us

• I changed my motherboard and now does not start LR

  I changed my motherboard (PC Win 7) and 6 LR does not start

  I need to download?

  I have to start LR 5 and proceed to 6 LR?

  Thank you!!!

  Franco - Italy

  Hello

  Yes you are right.

  You will need to load it again.

  Please see Download Photoshop Lightroom if necessary.

  Kind regards

  Sheena

• Does not start satellite C50-A-1E2

  Hello
  When press the power button / the notebook does not start. The screen is black, the fan is running and waving up and down. After 10 to 30 minute wait to start the laptop is well until next time. The laptop is not old, bought about 15 months ago. Nothing has changed, no BIOS changed also. The only change is Windows 10. Any ideas?

  Remove the battery and try to start with the power supply only.

• Tablet 2 critical internal battery error 190 now does not start

  Been implemented battery internal criticism 190 on lenovo thinkpad error 2 I bought 2 months ago and now won't start not until after 1 week of charge. Lenovo has a solution.

  Moderator edit: matched the content subject to

  Or anyone in the community has found a solution. Mine is not a problem of cut wire.

  Moderator edit: matched subject to content.