Error xerces panic!

I used the first elements 3.0 and did not open for awhile and when I did I got error Xerces panic. I uninstalled it because I was going to move anyway to 7. Had a friend help me to do a registry clean to try to get rid of bad entries like said in other forums. Installs 7, it took all night and now I can't always opens... same error message. Everyone get this error?

Hi, Pinksurvivor,

What version of Windows are you using?

Try the solution listed here:

http://social.technet.Microsoft.com/forums/Windows/en-us/174d279e-5537-46E9-BA2E-76095becdb49/Xerces-panic-error

Tags: Windows

Hosts file

The file "/ etc/hosts" must contain a fully qualified name of the server.

<IP-address>  <fully-qualified-machine-name>  <machine-name>

For example.

127.0.0.1 localhost.localdomain localhost

192.168.0.181 ol6-112.localdomain ol6-112

Oracle recommends the following settings to the minimum setting.

fs.suid_dumpable = 1 
fs.aio-max-nr = 1048576 
fs.file-max = 6815744 
kernel.shmall = 2097152 
kernel.shmmax = 536870912 
kernel.shmmni = 4096 
kernel.sem = 250 32000 100 128 
net.ipv4.ip_local_port_range = 9000 65500 
net.core.rmem_default = 262144 
net.core.rmem_max = 4194304 
net.core.wmem_default = 262144 
net.core.wmem_max = 1048586

Add or change the following lines in the "/ sysctl.conf" file.

fs.suid_dumpable = 1 
fs.aio-max-nr = 1048576 
fs.file-max = 6815744 
kernel.shmall = 2097152 
kernel.shmmax = 536870912 
kernel.shmmni = 4096 
#semaphores: semmsl, semmns, semopm, semmni 
kernel.sem = 250 32000 100 128 
net.ipv4.ip_local_port_range = 9000 65500 
net.core.rmem_default=4194304 
net.core.rmem_max=4194304 
net.core.wmem_default=262144 
net.core.wmem_max=1048586

Add the following lines in the "/ / etc/security/limits.conf" file.

oracle soft nproc 2047

oracle hard nproc 16384

oracle soft nofile 4096

oracle hard nofile 65536

oracle soft stack 10240

Change the "/ etc/security/limits.d/90-nproc.conf" file as described below. See the Note MOS [ID 1487773.1]

# Change this

* soft nproc 1024

# To this

* - nproc 16384

On permissive Secure Linux by editing the file "/ etc/selinux/config ', ensuring that the SELINUX flag is set as follows.

SELINUX=permissive

Once the change is complete, restart the server.

I thought you wanted to just perform an installation of the Oracle DB software.

If you want to create a database in silent mode, please see the MOS doc below.

DBCA templates (Doc ID 148676.1)

AddIndex problem on replicas
Hello

My application uses two knots, a master of the bdb and the other is slave. My version of dbxml is linux/2.4.14. The flag is DB_THREAD | DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL | DB_INIT_TXN | DB_RECOVER | DB_CREATE | DB_PRIVATE.

I stop the application on the first node, then the second request become a master. What is expected.

Then I add an index (using dbxml without transaction) to the container on the first node. New documents are inserted into the container to the second node. Then I try to restart the application to the first node, but it fails. I got an error: BDB: PANIC: error fatal region detected; run recovery. The error can easily be duplicated. Even if I run db_recover - c - h. /, it still does not work.

How to add an index for containers in the workplace master/replica (slave)?

Thank you very much.

-hua

Published by: user10929419 on March 23, 2009 21:26
Hi Hua.
>

My version of bdb is db4.7.25 with all the patches. My application uses DB_PRIVATE.

You use dbxml shell to add the index? In my case, dbxml shell doen't always work.

Yes. I think that dbxml shell does not support environment replicates in this version. You can dig into src/utils/shell/dbxmlsh.cpp, modify the code for your special use, re - compile the dbxml shell and try again.

>

Then I wrote a program with c++ API addindex, also using the DB_INIT_REP flag. This works. But I got to stop master and replica first before I can add indexes by using the program.

I have try to add indexes in master and it works. Please make sure that:
1. ALL PART of your operations are protected by an EXPLICIT transaction.
2. protect your transactions by try & catch blocks and try to make sense again. Exit the caught exception can help you see this error message occurs.

If I stop at one of them (say, stop the master and keep slaves running), index can be added successfully to master, but then be removed from maser automatically after restart of the master. Is this reasonable?

In fact you can NOT add indexes on slave. And what happens is reasonable: the captain joined the network, failed in the election and need to sync with the new master (the previous slave). If the index you inserted is removed.

Thank you
Rucong

Can someone decode this for me kernel panic error message please?

I had some problems recently with my 13 "MacBook Pro, Early 2011. I was able to resolve most of them between the forums and the Genius Bar, but there is still a persistent that even the Genius Bar can't seem to understand. Often, my computer freezes and restarts itself, and recently I had the window "your computer restarted due to a problem". I know kernel panic can be software or hardware related. I just wiped my hard drive (third-party SSD), reinstalled the OS X and restored from a Time Machine backup (but doesn't not restore any network or personal settings, as I was told by the Genius Bar help ensure no bugs/corruptions that affected my machine were installed). A complete hardware and software diagnostic was managed by Apple, where the only problem they found was that they could not read my hard drive and I have recommended replacing the hard drive slick, that I had let them. However, my problem: I have yet to have another random reboot with the new cable, but I am always starting gel, delay and slow speeds. I understood the message of the most recent kernel panic error, but I have little idea how do make sense. If someone could decode it for me and let me know what you think caused the kernel panic, I would be grateful!

Quick notes (it may or may not be useful): I also installed new third-party RAM me, updated 4-8 GB. I also have problems taking videos on Photo Booth. When I do, app causes my computer to lag, and the video does not correctly record (late of video development, multicolor screen during playback, not only audio video, etc.). Check the video card came back clean well.

Anonymous UUID: 52761E71-2C6C-A4F0-6320-518D613A8E30

Game Aug 11 23:05:12 2016

Panic report *.

panic (cpu 0 0xffffff802a3ce6fa appellant): Kernel trap at 0xffffff802a10e2f6, type 14 = page fault, registers:

CR0: 0 X 0000000080010033, CR2: 0XFFFFFF8511DEB5C0 CR3: 0X000000013ABE4067 CR4: 0X00000000000626E0

RAX: 0X00000000BA769D69, RBX: 0XFFFFFF80FB4FF400 RCX: 0XFFFFFF80FB4FF408 RDX: 0 X 0100000000000201

RER: 0XFFFFFF8133CD39F0, RBP: 0XFFFFFF8133CD3A60, IHR: 0XFFFFFF80FB4FF000, RDI: 0XFFFFFF822804401C

R8: 0XFFFFFF8511DEB5C0, R9: 0XFFFFFF8526E83F60, R10: 0XFFFFFF8228044128 R11: 0X0F0F0F0F0F0F0F0F

R12: 0XFFFFFEB29124F000, R13: 0XFFFFFF80FB4FF000, R14: 0X0000000000000F64 R15: 0 X 0000000000000001

RFL: 0 X 0000000000010206, RIP: 0XFFFFFF802A10E2F6, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

Lack of CR2: 0xffffff8511deb5c0, error code: 0 x 0000000000000000, CPU error: 0x0, PL: 1

Backtrace (CPU 0), frame: return address

0xffffff8133cd3680: 0xffffff802a2dab52

0xffffff8133cd3700: 0xffffff802a3ce6fa

0xffffff8133cd38e0: 0xffffff802a3ec563

0xffffff8133cd3900: 0xffffff802a10e2f6

0xffffff8133cd3a60: 0xffffff802a3425af

0xffffff8133cd3ac0: 0xffffff802a340f47

0xffffff8133cd3b00: 0xffffff802a3435eb

0xffffff8133cd3b30: 0xffffff802a348057

0xffffff8133cd3d00: 0xffffff802a34debe

0xffffff8133cd3f20: 0xffffff802a3cecef

0xffffff8133cd3fb0: 0xffffff802a3ec475

Corresponding to the current thread BSD process name: Google Chrome

Mac OS version:

15G 31

Kernel version:

15.6.0 Darwin kernel version: Thu Jun 23 18:25:34 PDT 2016; root:XNU-3248.60.10~1/RELEASE_X86_64

Kernel UUID: B5AA8E3E-65B6-3D0E-867B-8DCCF81E536C

Slide kernel: 0x000000002a000000

Text of core base: 0xffffff802a200000

Text __HIB base: 0xffffff802a100000

Name of system model: MacBookPro8, 1 (Mac-94245B3640C91C81)

Availability of the system in nanoseconds: 82778692404226

last load kext to 18326096476143: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7facfbd000 size 32768)

Finally unloaded kext to 18501757170760: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7facfbd000 size 32768)

kexts responsible:

com Sophos.kext.SAV 9.4.52

com Sophos.nke.SWI 9.4.52

com.rim.driver.BlackBerryUSBDriverInt 0.0.68

com Apple.filesystems.smbfs 3.0.1

com.apple.driver.AudioAUUC 1.70

com Apple.filesystems.autofs 3.0

com.apple.driver.AppleHWSensor 1.9.5d0

com.apple.driver.AGPM 110.22.0

com.apple.driver.AppleOSXWatchdog 1

com.apple.driver.AppleMikeyHIDDriver 124

3.12.8 com.apple.driver.ApplePolicyControl

com Apple.Driver.pmtelemetry 1

com.apple.driver.AppleHDA 274.12

com.apple.driver.AppleUpstreamUserClient 3.6.1

com.apple.driver.AppleMikeyDriver 274.12

com.apple.iokit.IOUserEthernet 1.0.1

com.apple.iokit.IOBluetoothSerialManager 4.4.6f1

com.apple.Dont_Steal_Mac_OS_X 7.0.0

com.apple.driver.AppleIntelHD3000Graphics 10.0.0

com.apple.driver.AppleBacklight 170.8.9

com.apple.driver.AppleHV 1

com.apple.driver.AppleSMCPDRC 1.0.0

com.apple.driver.AppleMCCSControl 1.2.13

com.apple.driver.SMCMotionSensor 3.0.4d1

com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.6f1

com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

com.apple.driver.AppleLPC 3.1

com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0

com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

com.apple.driver.AppleSMCLMU 208

com.apple.driver.AppleThunderboltIP 3.0.8

com.apple.driver.AppleUSBTCButtons 245,4

com.apple.driver.AppleUSBTCKeyboard 245,4

com.apple.driver.AppleIRController 327,6

com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

com.apple.BootCache 38

com.apple.iokit.SCSITaskUserClient 3.7.7

2.8.5 com.apple.iokit.IOAHCIBlockStorage

com.apple.driver.AirPort.Brcm4331 800.20.24

com.apple.driver.AppleSDXC 1.7.0

com.apple.iokit.AppleBCM5701Ethernet 10.2.0

com.apple.driver.AppleFWOHCI 5.5.4

com.apple.driver.AppleAHCIPort 3.1.8

com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

com.apple.driver.AppleRTC 2.0

com.apple.driver.AppleSmartBatteryManager 161.0.0

com.apple.driver.AppleACPIButtons 4.0

com.apple.driver.AppleHPET 1.8

com.apple.driver.AppleSMBIOS 2.1

com.apple.driver.AppleACPIEC 4.0

com.apple.driver.AppleAPIC 1.7

com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

com Apple.NKE.applicationfirewall 163

com Apple.Security.Quarantine 3

com.apple.security.TMSafetyNet 8

com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

com Apple.kext.Triggers 1.0

3.12.8 com.apple.AppleGraphicsDeviceControl

com.apple.driver.DspFuncLib 274.12

com.apple.kext.OSvKernDSPLib 525

com.apple.iokit.IOSurface 108.2.3

com.apple.iokit.IOSerialFamily 11

com.apple.driver.CoreCaptureResponder 1

com.apple.iokit.IOFireWireIP 2.2.6

com.apple.driver.AppleSMBusController 1.0.14d1

com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.6f1

com.apple.iokit.IOBluetoothFamily 4.4.6f1

com.apple.driver.AppleHDAController 274.12

com.apple.iokit.IOHDAFamily 274.12

com.apple.iokit.IOAudio!

System profile:

Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)

Bluetooth: Version 4.4.6f1 17910, 3 services, 27 aircraft, 1 incoming serial ports

Bus crush: MacBook Pro, Apple Inc., 22.1

Memory module: DIMM0/0 BANK, 4 GB DDR3, 1333 MHz, 0x859B, 0x435434473353313333394D2E4D3136464B44

Memory module: DIMM0/1 BANK, 4 GB DDR3, 1333 MHz, 0x859B, 0x435434473353313333394D2E4D3136464B44

USB device: USB 2.0 Bus

USB device: FaceTime HD camera (built-in)

USB device: Hub

USB device: Apple keyboard / Trackpad

USB device: Hub BRCM2070

USB Device: USB Bluetooth host controller

USB device: USB 2.0 Bus

USB device: Hub

USB Device: IR receiver

Serial ATA Device: Crucial_CT480M500SSD1, 480,1 GB

Serial ATA Device: MATSHITADVD-R UJ - 8à8

Model: MacBookPro8, 1, MBP81.0047.B2A of BootROM, 2 processors, Intel Core i5, 2.3 GHz, 8 GB, MSC 1.68f99

Network service: Wi - Fi, AirPort, en1

Graphics card: integrated Intel HD Graphics 3000, Intel HD Graphics 3000,

Model: MacBookPro8, 1, MBP81.0047.B2A of BootROM, 2 processors, Intel Core i5, 2.3 GHz, 8 GB, MSC 1.68f99

Graphics card: integrated Intel HD Graphics 3000, Intel HD Graphics 3000,

Memory module: DIMM0/0 BANK, 4 GB DDR3, 1333 MHz, 0x859B, 0x435434473353313333394D2E4D3136464B44

Memory module: DIMM0/1 BANK, 4 GB DDR3, 1333 MHz, 0x859B, 0x435434473353313333394D2E4D3136464B44

Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)

Bluetooth: Version 4.4.6f1 17910, 3 services, 27 aircraft, 1 incoming serial ports

Network service: Wi - Fi, AirPort, en1

Serial ATA Device: Crucial_CT480M500SSD1, 480,1 GB

Serial ATA Device: MATSHITADVD-R UJ - 8à8

USB device: USB 2.0 Bus

USB device: FaceTime HD camera (built-in)

USB device: Hub

USB device: Apple keyboard / Trackpad

USB device: Hub BRCM2070

USB Device: USB Bluetooth host controller

USB device: USB 2.0 Bus

USB device: Hub

USB Device: IR receiver

Bus crush: MacBook Pro, Apple Inc., 22.1

I'm not sure regarding the panic itself 100%, but the symptoms you describe, I'll try to put first the original RAM if you, as a test. Also try a SMC reset: reset the management system (SCM) controller on your Mac - Apple Support.

Kernel panic error

Hi all

I have recently several kernel panics on my Mac Pro. His repeting so many times and I don't know how to do. It's the file error, that the system generates. I'll be more than happy if someone can help me solve the problem.

Interval since the last report of panic: 36099 sec

Panic since the last report: 4

Anonymous UUID: 3E081B78-79D3-44EE-B238-B67C1E06DE20

Mar 15 13:51:42 Mar 2016

Machine-check capabilities (cpu 1) 0 x 0000000000000006:

family: 6, model: 15, stepping: Firmware 6: 198

Intel Xeon 5130 2.00GHz CPU

6 banks of error reports

Machine-check the status of 0 x 0000000000000005:

Restart valid IP

machine-check current

Reporting of errors in the MCA records:

IA32_MC0_STATUS (0 x 401): 0 x 1000000020000000 invalid

IA32_MC1_STATUS (0 x 405): 0 x 0000000000000000 invalid

IA32_MC2_STATUS (0x409): 0 x 0000000000000000 invalid

IA32_MC3_STATUS (0x40d): 0 x 0020000000000000 invalid

IA32_MC4_STATUS (0 x 411): 0 x 0000000000000011 invalid

IA32_MC5_STATUS (0 x 415): 0xb200001080200e0f valid

MCA error code: 0x0e0f

Model specific error code: 0 x 8020

Other information: 0x00000010

Status bits:

Corrupt processor context

Error enabled

Error uncorrected

panic (cpu 1 0x2aaf41 appellant): check the 0x004879f0 Machine, thread: 0x12178b7c, trapno:0 x 12, error: 0x0, records:

CR0: 0 X 80010033, CR2: 0XA0863140 CR3: 0X008F0000 CR4: 0 X 00000660

EAX: 0X00000000, EBX: 0X12B40A80 ECX: 0X884A3F30 EDX: 0 X 00000035

ESP: 0X884A3500, EBP: 0X884A3548, ESI: 0 X 00000049, EDI: 0 X 00491570

EFL: 0 X 00000202, EIP: 0X004879F0

Backtrace (CPU 1), frame: return address (4 potential args on stack)

0x80f22fb8: 0x21b837 (0x5dd7fc 0x80f22fec 0x223ce1 0x0)

0x80f23008: 0x2aaf41 (0x59dfe4 0x59e0d1 0x4879f0 0x12178b7c)

0x80f230f8: 0x2a29f2 (0 x 1 0 x 41414171 41414341 x 0 0 x 61454141)

0x884a3548: 0x49305e (0 x 3 0x4930b0 0x884a3a0c 0 x 491570)

0x884a3a58: 0 x 494591 (0x884a3f2c 0 x 2 0x5fbfe9d0 0x7fff)

0x884a3ec8: 0 x 494358 (0x884a3f28 0 x 3 0x5fbfe9d0 0x7fff)

0x884a3f78: 0x4f82fb (0x12374d20 0x11f92568 12161684 0 x 0 x 0)

0x884a3fc8: 0x2a251d (0x11f92564 0 x 0 0 x 10 0x127ee680)

Name of the BSD corresponding to the current thread process: launchd

Mac OS version:

10K 549

Kernel version:

10.8.0 Darwin kernel version: kills Jun 7 16:33:36 PDT 2011; root:XNU-1504.15.3~1/RELEASE_I386

Name of system model: MacPro1, 1 (Mac-F4208DC8)

Availability of the system in nanoseconds: 96955094968

discharged kexts:

(none)

kexts responsible:

com.realtek.driver.RTL8192CU 1020

com.logmein.driver.LogMeInSoundDriver 1.0.3

com.digidesign.iokit.DigiIO 7.3f117

com.digidesign.iokit.DigiDal 7.3f117

com.roxio.BluRaySupport 1.1.6

at.obdev.nke.LittleSnitch 2.0.45

com.apple.driver.InternalModemSupport 2.6.2 - last load 40732399361

com Apple.filesystems.autofs 2.1.0

com.apple.driver.AppleHWSensor 1.9.3d0

com.apple.driver.AppleTyMCEDriver 1.0.2d2

com.apple.driver.AppleHDA 2.0.5f14

com.apple.driver.AppleUpstreamUserClient 3.5.7

com.apple.driver.AppleMCCSControl 1.0.20

com.apple.driver.AudioAUUC 1.57

6.3.6 com.apple.kext.ATIFramebuffer

com.apple.Dont_Steal_Mac_OS_X 7.0.0

com.apple.driver.AudioIPCDriver 1.1.6

com Apple.filesystems.NTFS 3.4

1.1.9 com.apple.driver.AppleMCEDriver

com.apple.driver.AppleIntelYonahProfile 14

com.apple.driver.AppleIntelPenrynProfile 17

com.apple.driver.AppleIntelNehalemProfile 11

com.apple.driver.AppleIntelMeromProfile 19

com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1

com.apple.driver.AppleLPC 1.5.1

6.3.6 com.apple.ATIRadeonX3000

com.apple.iokit.SCSITaskUserClient 2.6.8

com.apple.BootCache 31.1

com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1

com.apple.driver.AppleIntel8254XEthernet 2.1.3b1

com.apple.iokit.IOAHCIBlockStorage 1.6.4

com.apple.driver.AppleFWOHCI 4.7.3

com.apple.driver.AppleUSBHub 4.2.4

2.1.7 com.apple.driver.AppleAHCIPort

com.apple.driver.AppleIntelPIIXATA 2.5.1

com.apple.driver.AppleEFINVRAM 1.4.0

com.apple.driver.AppleUSBEHCI 4.2.4

com.apple.driver.AppleUSBUHCI 4.2.0

com.apple.driver.AppleACPIButtons 1.3.6

com.apple.driver.AppleRTC 1.3.1

com.apple.driver.AppleHPET 1.5

com.apple.driver.AppleSMBIOS 1.7

com.apple.driver.AppleACPIEC 1.3.6

com.apple.driver.AppleAPIC 1.4

com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0

com Apple.Security.sandbox 1

com Apple.Security.Quarantine 0

com 2.1.14 Apple.NKE.applicationfirewall

com.apple.driver.AppleIntelCPUPowerManagement 142.6.0

com.apple.driver.AppleHDAHardwareConfigDriver 2.0.5f14

com.apple.driver.AppleProfileReadCounterAction 17

com.apple.driver.DspFuncLib 2.0.5f14

com.apple.driver.AppleProfileTimestampAction 10

com.apple.driver.AppleProfileThreadInfoAction 14

com.apple.driver.AppleProfileRegisterStateAction 10

com.apple.driver.AppleProfileKEventAction 10

com.apple.driver.AppleProfileCallstackAction 20

com.apple.iokit.IOFireWireIP 2.0.3

com.apple.iokit.IOSurface 74.2

com.apple.iokit.IOBluetoothSerialManager 2.4.5f3

com.apple.iokit.IOSerialFamily 10.0.3

com.apple.iokit.IOAudioFamily 1.8.3fc2

com.apple.kext.OSvKernDSPLib 1.3

com.apple.driver.AppleHDAController 2.0.5f14

com.apple.iokit.IOHDAFamily 2.0.5f14

com.apple.iokit.AppleProfileFamily 41

com.apple.driver.AppleSMC 3.1.0d5

com.apple.driver.IOPlatformPluginFamily 4.7.0a1

com.apple.driver.AppleSMBusPCI 1.0.10d0

com.apple.iokit.IONDRVSupport 2.2.1

6.3.6 com.apple.kext.ATI5000Controller

6.3.6 com.apple.kext.ATISupport

com.apple.iokit.IOGraphicsFamily 2.2.1

com.apple.iokit.IOUSBHIDDriver 4.2.0

com.apple.driver.AppleUSBMergeNub 4.2.4

com.apple.driver.AppleUSBComposite 3.9.0

com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8

com.apple.iokit.IOBDStorageFamily 1.6

com.apple.iokit.IODVDStorageFamily 1.6

com.apple.iokit.IOCDStorageFamily 1.6.1

com.apple.driver.AppleFileSystemDriver 2.0

com.apple.driver.XsanFilter 402.1

com.apple.iokit.IOATAPIProtocolTransport 2.5.1

com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8

com.apple.iokit.IONetworkingFamily 1.10

com.apple.iokit.IOFireWireFamily 4.2.6

com.apple.iokit.IOUSBUserClient 4.2.4

com.apple.iokit.IOAHCIFamily 2.0.6

com.apple.iokit.IOATAFamily 2.5.1

com.apple.iokit.IOUSBFamily 4.2.4

com.apple.driver.AppleEFIRuntime 1.4.0

com.apple.iokit.IOHIDFamily 1.6.6

com.apple.iokit.IOSMBusFamily 1.1

com.apple.kext.AppleMatch 1.0.0d1

com.apple.security.TMSafetyNet 6

com.apple.driver.DiskImages 289.1

com.apple.iokit.IOStorageFamily 1.6.3

com.apple.driver.AppleACPIPlatform 1.3.6

com.apple.iokit.IOPCIFamily 2.6.5

com.apple.iokit.IOACPIFamily 1.3.0

Model: MacPro1, 1, MP11.005C.B08 of BootROM, 4 processors Dual-Core Intel Xeon, 2 GHz, 3 GB, MSC 1.7f10

Graphics card: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe 1024 MB

Memory module: global_name

Network service: 802.11n WIRELESS, Ethernet, en8 network adapter

PCI card: ATI Radeon HD 5770, sppci_displaycontroller, Slot-1

PCI card: ATI Radeon HD 5770, ATY, VervetParent, Slot-1

Serial ATA Device: SAMSUNG HD501LJ, 465,76 GB

Serial ATA Device: ST2000DM001-1CH164, 1.82 TB

Serial ATA Device: WDC WD2500AAJS-41RYA0, 232.89 GB

Serial ATA Device: WDC WD20EARX-00PASB0, 1.82 TB

Parallel ATA Device: OPTIARC DVD RW AD - 7170 has

USB device: 802.11n WLAN Adapter, 0x0bda (Realtek Semiconductor Corp.), 0 x 8178, 0xfd200000 / 2

USB device: Generic USB Hub, 0x058f (Alcor Micro, Corp.), 0 x 9254, 0x3d100000 / 2

USB device: USB OPTICAL MOUSE, 0x093a (Pixart Imaging, Inc.), 0 x 2510, 0x3d110000 / 4

USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0 x 1003, 0x3d140000 / 3

USB device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x020c, 0x3d143000 / 5

FireWire devices: built-in_hub, up to 800 Mb/s

This

6 banks of error reports

Machine-check the status of 0 x 0000000000000005:

indicates a bad memory. Memory FB in the 2006-2008 Mac pros running hot and often fail with time.

Periodically, open System profiler and see memory and see what is said about memory. If this isn't the case, OK or missing while the memory is bad. The screen is static and yo have close and then reopen it to refresh.

How to fix the error message: xerces.dll is missing

You try to view a dvd, but when I go to play the dvd, I get an error message: xerces.dll is missing. How can I solve this problem?

Hello

1. what operating system do you use?
2 are there any changes or updates made on the computer?
3. are you able to read the DVD by cancelling the error message?
4 is the issue limited only when you try to play the DVD?

Try to play the DVD on another computer and check.

Xerces.dll error message can be caused by corruption in the Windows System.

Check out the link to use the System File Checker (SFC) tool to troubleshoot missing or corrupted system files in Windows 7.

SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC /scannnow is completely automatic and very easy to use, the tool should usually be your first troubleshooting step.
http://support.Microsoft.com/kb/929833

MacBook Pro Panic error - will not start

I'm getting the following at the start. Have no idea what it is or what to do. Appreciate any advice. Backup the latest TM is dec 10. But can't even get the stages of recovery to work. Tests of material D on OK.

If you're in Snow Leopard as your profile is displayed, follow these steps:

Reinstall OS X without erasing the drive

1 fix the hard disk and permissions

Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left. In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions . Wait until the operation is complete, then exit FROM and return to the installer.

If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

2 reinstall Snow Leopard

If the disc is OK then leave FROM and return to the installer. Proceed to reinstall OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a new copy of Mac OS X, the installer will move your Home folder, third-party applications, elements of support and network preferences in the newly installed system.

Download and install Mac OS X 10.6.8 v1.1 updated Combo.

If the above does not work, then follow these steps:

Clean Install of Snow Leopard

Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

1. start the computer using the Snow Leopard installation disc or disc 1 that came

with your computer. Insert the disc into the optical drive and restart the computer.

After the ring, press and hold the C"" key. Release the button when you see

a small gear appear under the dark gray Apple logo.

2. once the load setup program select your language and click continue

button. When the menu bar appears select utility drive in the Utilities menu.

After charge OF select hard drive entry in the list on the left (mfgr. ID and drive

size.) Click the Partition tab in the main window of THE. Set the number of

partitions to one (1) from the Partitions of the dropdown menu, click on the Options button

GUID, click OK, and then select define the Mac OS Extended format type

(Logged, if supported), and then click the apply button.

3. when formatting is complete FROM and return to the installer. Move forward

with the installation of OS X and follow the instructions included with the installer.

4. Once installation is complete your computer will restart in the Setup

Assistant. After finishing Setup Wizard will complete the installation, after which

you will use a new installation of Mac OS X. You can now begin the process of updating

at the opening of updated software and installing all recommend updates to bring your

current installation.

5. If you plan to sell or to give to your remote computer, then proceed as follows:

Once you reformat your hard disk and reinstall OS X, the computer restarts with a

Screen of welcome and you prompt to choose a country or region. If you want to leave

the Mac in an out-of-box state, do not continue with the configuration of your system. Instead,.

Press command-Q to stop the Mac. When the new owner turns on the Mac,

the Setup Wizard will guide them through the configuration process.

Download and install Mac OS X 10.6.8 v1.1 updated Combo.

'Unknown error' export - it's time to panic!

Hi guys
Hello. I use Win7 64-bit, SP1 with Pr CC2014. I worked on a documentary of long hours. I exported several times for the customer (with H.264, game source, medium flow), but today trying to export the final cut I suddenly get this message "unknown error" and that it will not be exported.
Has anyone faced this and if yes, how is is it resolved?
Kind regards
Graham

Thanks for your comments. When I started the PC this morning, he made the documentary long time using MPEG 2, game source, medium flow. If the graphics card was overloaded with work yesterday? I posted another thread on the output because the quality isn't the best, and the file size is 2.5 GB.

Error in kernel panic after you convert a machine debian using VMWare converter 5.5

Hello
I'm "kernel panic" message receving after you convert a Debian machine in our virtual infrastructure.
I followed the post below to solve the problem of for a Centos machine kernel panic. But it did not work for Debian.
http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1002402
Can someone help me with this problem please?
Kind regards
Nithin

The problem is resolved. The steps are described in the link below.

Conversion of VMware P2V Debian squeeze | System administrator's Guide

Thank you for all the support

Error xerces panic!

Similar Questions

Hosts file

Maybe you are looking for